This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P3 ’Light’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to refraction, students are provided with a description of this process along with a digram to help demonstrate the idea. Next, students will investigate the process of refraction. Students will be provided with a worksheet, they will need to fill in the blanks on the worksheet to provide a full method for the practical investigation, this can be checked against the answers provided on the PowerPoint before students begin. Once students have completed the practical investigation they will then need to complete a fill-in-the-blank task to conclude what they have found during the investigation. A diagram of the process of refraction is then shown to students, with detailed labels explaining what is happening as light travels from air, into glass and back out the other side again. Students could sketch a copy of this into their books for notes, they will then summarise what they have learned so far with a cloze activity. This can be self-assessed using the mark scheme provided. Lastly, students will complete a ‘Progress Check’ task - this is a set of questions for students to complete in their books which will assess what they have learned this lesson. The answers for this task are also included in the PowerPoint presentation so students can mark and correct their work once this task is complete. The plenary task is for students to wrist a list of key words from the lessons they have covered on light. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P4 ’Space’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an video on the Solar System, students will watch this and whilst watching should answer a set of questions. Once students have completed this task, they can self-assess their work using the mark scheme provided. In the next activity, information stations will be placed around the classroom so that students can gather information and use to this to complete a worksheet. They can talk to each other to complete this task, once it is complete the work can be self-assessed using the mark scheme provided. This task also includes a research project, so if students have completed the work they can use tablets/computer/laptops/phones to complete research on the Cassinni Space Probe. The last task requires students to complete a crossword on the Solar System, using what they will have learned over the last couple of lessons. The plenary task requires students to summarise what they have learned this lesson in three sentences, a list of key words is provided for pupils to use in their sentences. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. This lesson begins with an introduction to potential difference, students will watch a couple of minutes of a video and whilst watching will need to answer a set of questions. This task can then be self-assessed using the mark scheme provided on the PowerPoint presentation. Next, students will be shown a circuit diagram, with two voltmeters connected - one parallel to a cell and one parallel to a light bulb. Students are asked to ‘Think > Pair > Share’ their ideas about whether the potential difference is higher across the battery or across the cell. Students will then carry out an investigation to find the answer the this question. After this, students will complete a fill-in-the-blank task to summarise what they have learned so far this lesson. Once complete student can self-assess or peer-assess their work using the mark scheme provided. Lastly, students will be given a set of questions relating to potential difference and also resistance, students will need to use what they have learned this lesson as well last lesson on resistance to complete these questions. This task can then be marked and assessed using the mark scheme provided. This is followed by a very quick anagram challenge, students will need to unscramble the anagrams to spell 6 key words related to the topic of electricity, students can write a definition for each key word if they have finished. The plenary requires students to write a twitter message, summarising what they have learned this lesson, including #keywords. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a video about the formation of fossil fuels and the impact of these energy resources on our environment. Students will watch the video and will need to answer a set of questions, once this task has been completed students will self-assess their work using the mark scheme provided. Next, students considering which of the energy resources are renewable or non-renewable. Students will then use the posters, which can be placed around the room or on pupils desks, to complete a table which identifies how the energy resource generates electricity and the advantages and disadvantages of each energy resource. Students are then given a list of statements about all power stations which they need to cut and stick (or write) into two columns - advantages or disadvantages. To challenge higher ability pupils this could be completed at the back of students books, so they cannot use information from the previous task. Pupils can then peer-assess their work. The plenary activity is for students to summarise what they have learned this lesson three sentences. All resources are included. Please review, I would appreciate any feedback :). Thanks! All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a discussion on what power is a measurements of, there are hints that can be put on the board for lower ability students. You can then provide students with a definition of power which they can write down in their books. Pupils then consider the units of power, they can copy and complete sentences on the board which compare watts to joules/second and the difference between watts and kilowatts, joules and kilo joules. Next is the completion of a formula triangle in their books, higher ability students can figure out how to write this on their own but for lower ability students you may want to guide them through it. The concept of power is then put into context using Mo Farah/Usain Bolt as examples (videos provided). The next task is a table that students will need to copy off the board, it outlines different appliances and pupils will have to perform calculations to fill in the blanks. Pupils can self-assess their work using red pens, answers are provided on the PowerPoint slide. Next, students will complete a ‘copy and complete’ task, students will need to fill in the blanks to complete a paragraph which summarises everything that they have learned throughout the course of this lesson. The answers to this task can be self-assessed using the mark scheme provided. The last part of the lesson focuses on electricity bill calculations, using the units kWh. Students will be shown a worked example of a calculation to demonstrate how much energy (in kWh and Joules) is used by a laptop over the course of one hour. Students will then compete a set of problems similar to this, they can self-assess their work using the mark scheme once this task is complete. The plenary task requires students to write a Whatsapp message to a friend to summarise what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by introducing the concept of ‘work done’, by using the example of a cyclist on a bike. The first task the pupils will need to complete is to produce a mind map of activities which require work to be done in order for something to happen. Students can discuss their ideas with their partners, they can write their ideas down into their books and then check their work against the answers provided in the PowerPoint. Pupils are then shown the equation to calculate work done and they can work through a model question. You can work through this question with pupils on the board or ask them to try and complete it in their books, students can then self-assess their work. The main activity for this lesson is a practical activity, the method for this practical is included in the PowerPoint presentation. Pupils will drag a wooden block across the desk a measured distance, the wooden block will be dragged initially with no elastic bands around it and then with one elastic band and finally with two elastic bands. Pupils will measure the force applied to drag the block using a Newton meter and record their results in a table (table included at the end of the PowerPoint). Using the measured distance and the force applied pupils can then work out the work done to drag each type of wooden block. Students will now complete a ‘quick check’ task whereby students will need to complete a set of problems on ‘work done’ calculations. Once complete, students can self-assess their work against the answers provided. Finally, students are given a worksheet of problems which have been completed by another pupil. Students will need to mark and correct the work, making corrections where necessary. This task can then be marked and assessed using the mark scheme provided. The plenary task requires students to write a twitter message to explain what they have learned today, including #keywords. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with students being asked to ‘Think > Pair > Share’ their ideas about whether like and unlike charges attract or repel each other. After a short class discussion, students will feed their ideas back to the class and the answers can be revealed - like charges repel each other and unlike charges repel each other. Students are now introduced to the sub-atomic particles which make up an atom - protons, neutrons and electrons. From the description provided students will need to have a go at filling in the blanks on the diagram of the atom, once completed students can self-assess their work using the mark scheme provided. Next, students will complete a ‘Memory Test’ activity whereby a table of information is provided to students on the relative mass and charges of a proton, neutron and an electron. Students will be given a few minutes to observe and remember the information, then the table is taken away and students will need to recreate the table. The complete table is then shown to students so they can show mark and correct their work. Students will now complete a mid-lesson progress check to assess their knowledge of what they have learned so far this lesson, the mark scheme for this progress check is included in the PowerPoint so students can self-assess the work once complete. The next part of the lesson will focus on static charge, students will watch a video about this phenomenon and will need to answer a set of questions whilst watching. Once complete students can either self-assess or peer-assess their work using the answers provided. The last task students will need to complete is a fill-in-the-blank task, students can mark this task using the mark scheme provided. The plenary requires students to write a WhatsApp message to a friend, summarising what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy. The lesson starts with students asked to ‘Think > Pair > Share’ their ideas about what the difference between heat and temperature is. Students can discuss and then feed their ideas back to the class, the answers can then be revealed using the PowerPoint presentation. Students will now watch a video, recapping on particle theory, whilst watching students will need to answer a set of questions, this task can be marked and assessed using the mark scheme included in the PowerPoint presentation. Next, students are asked to consider what affects the amount of energy stored in something. Students will be given an example of a glass of water and a swimming pool full of water, both at 28 degrees celsius. Once students have had a chance to discuss, the answers will be revealed and students will then need to complete a set of questions on this topic. The answers for this task are included so students can self-assess their work using the mark scheme provided. Lastly, students are asked to sort a a set of diagrams out from those that will store the most amount of heat energy to those that will store the least amount of energy, given the description. The plenary task requires students to pick a plenary - either summarise what they have learned in three sentences or write a list of definitions for a set of key words included. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson starts with students identifying the speeds of different animals, from a list provided. Students are then asked to think about the measurements needed to calculate speed, they will be then be shown a worked example of how to calculate speed; students can take notes on this in their books. Students will now be shown how to use a formula triangle to calculate either speed, distance or time and will be given the definition for ‘mean/average speed’ - they can also make a note of this in their books. Students will now complete a ‘quick check’ task, a set of questions based upon what the students have learned to far this lesson. This task can then be self-assessed using the mark scheme provided. Next, students will complete an investigation to calculate the walking speed of two students in their group. One student will walk a slow speed and one students will walk a fast speed, over a set distance, whilst the third member of the group records the time. Results can be recorded in table in their books, students can then complete a distance-time graph of their results. Lastly, students are introduced to the idea of relative motion through a ‘Think>Pair>Share’ task. The plenary task requires students to complete a 3-3-1 reduction of what they have learned this lesson, this includes 3 facts, 3 key words reduced to 1 key words. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P2 ’Sound’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with a ‘Memory’ Test, students will be shown a diagram of the ear with labels identifying the key parts that they need to know. Students can spend a few minutes looking at the diagram, the labels will then be taken away and they will need to try to annotate a copy of the diagram as best as possible. The labels will then be added to the diagram so students can mark and correct their work. Next, students will watch a video on how the ear, and the brain, is able to detect sound. Students will be given a set of questions to answer whilst they watch the video, once this task is complete students can self-assess their work against the mark scheme provided. The next part of the lesson focuses on the ways in which the ear can be damaged, students should firstly ‘Think > Pair > Share’ their ideas about how the ears/hearing can be damaged. The answers will then be revealed so students can assess their work and note down any they didn’t get. Students will then carry out a ‘Doctor’ role-play, where each group will have somebody with a particular problem. The students need to work out what the problem is, explain what the problem is and work out the best way to treat it. This can be acted out as a doctot-patient scene. Lastly, students will complete a progress check to assess their understanding of what they have learned so far this lesson. This task can be completed in their books and can be self-assessed or peer-assessed using the mark scheme provided. The plenary activity requires students to write a question about the component of the ear to test their peers understanding of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Motion & Pressure’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a demonstration - the collapsing can. Students should hopefully be able to identify that the can that collapsed had a lower pressure inside the can than outside the can, causing the can to collapse inwards. This leads into a description of gas pressure, including a diagram to help demonstrate the concept. Students will now ‘Think > Pair > Share’ their ideas about what could cause an increase in pressure, after a short discussion the answers will be revealed to students - increasing the number of particles and increasing the temperature or reducing the size of the particles. Students will now complete a task based upon what they have learned so far this lesson, this can be self-assessed using the mark scheme provided. Students will now complete an investigation called ‘What makes a ball bouncy?’. Students will investigate whether a ball becomes more bouncy the more/less pumps of air it has in it. Students will copy the table of results into their books, draw a graph of their results and complete analysis questions. This task can be self-assessed once complete. Lastly, students are introduced to the idea of atmospheric pressure and shown a diagram which represents the density of air particles at the top of the mountain compared to the bottom. The plenary task requires students to complete one of the sentence starters in their books to summarise what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P2 ’Sound’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with a definition of an ‘echo’ and how echoes can be produced by ship via sonar and by baby scanners via ultrasound. Students will then consider the ways in which echoes can be reduced and why this might be important in places such as theaters, concert walls & recording studios. The first activity involves students using a range of materials (tissue paper, cardboard, cotton wool, bubble wrap, paper, plastic) to soundproof a margarine tub, which will hold a buzzer and a decibel meter. Each group can test how well they have soundproofed their margarine tub, perhaps a prize for the best one! Once this has been complete students can write an evaluation for their practical, they will need to consider which part of their practical were carried out well , how the findings could be improved and what they would do differently if it was done again. Next, students will be given a piece of information on ‘Ultrasound’ - using this they will need to answer a set of questions in their books. This task can be self-assessed using the mark scheme provided in the books. The last task is a crossword on ‘Sound’, students should use knowledge of that they have learned over the course of the topic on sound to answer the clues and complete the crossword. The task can be assessed using the mark scheme provided. The plenary requires students to complete one of the selection of sentence starters to summarise what they have learned so far this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Motion & Pressure’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a a ‘Think > PAir > Share’ task, students are provided with some information about ice road truckers, students are asked to consider whether the job of an ice road trucker is too risky. Students are also asked to discuss the meaning of the term ‘pressure’ - after a short class discussion the definition for the term ‘pressure’ will be revealed to students, they can make a note of this in their books. Students are now introduced to the formula for pressure (pressure = force / area), using this formula students will complete a couple of tasks where they will work through a set of pressure problems. Once complete this task can then be self-assessed using the mark scheme provided. Students will now complete an activity where they will work out the pressure they exert on the ground. Lastly, students will complete a ‘copy and correct’ task, they will be given a paragraph of information related to what they have learned this lesson. They will need to copy it out, correcting any parts they believe to be wrong. This task can the self-assessed using the mark scheme provided once it is complete. The plenary task requires students to complete an ‘exit card’ to summarise what they have learned this lesson, the exit card will include three key words, one fact and one questions for students to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Motion & Pressure’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to moments, by using a door opening by it’s hinges as an example. Student are shown an animation of a man trying to push a door open close to the hinges and far from the hinges of the door, demonstrating it is easier further from the hinges. Students are then introduced to the calculation - moment = force x distance from the pivot. Students are then shown a worked example using the calculation, before being presented with a problem to solve themselves. Next, students are shown a diagram of a man pushing down on one side of a see saw, at the other side is a bag of money. This diagram is labeled to show the effort force, pivot and load. Students are then given a worksheet on levers, students will need to identify the effort force, pivot and load in each of the diagrams and also match the key words to the correct definition. This work can be self-assessed using the mark scheme provided once it is complete. The last two tasks are assessment tasks, firstly students will copy and complete the paragraph, using the key words provided, to summarise what they have learned this lesson. This can then be self-assessed using the mark scheme provided. Lastly, students are presented with a set of moment problems, using the calculation they learned at the beginning of the lesson students will need to work through these calculations. The mark scheme for this task is also included so students can self-assess or peer-assess their work. The plenary task requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P2 ’Sound’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be introduced to the main features of a wave - amplitude, frequency and wavelength. Students can sketch a diagram of a wave into their books and take notes on the main features. Students are now introduced to transverse and longitudinal waves, students will need to know the differences between the direction of the oscillations of these two waves. Students are then asked to discuss how a ‘slinky’ could be used to demonstrate these two waves, after a short class discussion students can be shown an animation to demonstrate how a slinky shows these two types of wave. Students will now get into groups and come up with a short role-play to demonstrate the differences between these two waves. Students will now complete a progress check where they will need to copy and complete a paragraph to summarise what they have learned so far this lesson. This task can then be self-assessed using the mark scheme provided. A diagram of a longitudinal wave which shows the differences between rarefactions and compressions is shown to students, they will then need to answer a set of questions. The answers to this task are included in the PowerPoint so students can self-assess their work once it is complete. Next, students will need to ‘Think > Pair > Share’ their ideas about what happens when two or more waves join together. Students can discuss their ideas first before being shown a video demonstrating the process of superposing waves. Students will then complete a fill-in-the-blank task to summarise what they have learned this lesson. The plenary task requires students to write a WhatsApp message to tell their friends what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a homeschool pack designed for the KS3 Year 8 Science course, specifically the ‘P2.1 Electricity & Magnestism’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains eight pages of information, to meet learning objectives within the Year 8 ‘Electricity & Magnetism’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Charging Up Current & Charge Potential Difference Resistance Series & Parallel Circuits Magnetism & Magnetic Fields Electromagnets Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Energy’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with students being introduced to a distance-time graph, an example is given along with a description of what a distance-time graphs shows. Students are asked to ‘Think > Pair > Share’ their ideas about what a horizontal line on the graph shows. Students will be given a hand-out of the distance-time graph showing Phil’s route around a race track. Students will be asked to complete a set of questions about using information from this graph, this task can be self-assessed using the mark scheme provided. Students will now be asked to produce their own distance-time graphs by getting into groups of three and measuring the distance one student walks and the time it takes. Students will need to use the graph to work out when his/her partner was walking the fastest, and will need to calculate his/her average speed at this point. Next, students will watch a video on acceleration, whilst watching the video students will complete a set of questions. This work can be self-assessed using the mark scheme provided once it is complete. Lastly, students will use a distance-time graph to complete an exam-style question. This task can be self or peer assessed using the mark scheme provided once students have completed it. The plenary task requires students to write three quiz questions to test peers knowledge of what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a homeschool pack designed for the KS3 Year 7 Science course, specifically the ‘P1.3 Light’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains four pages of information, to meet learning objectives within the Year 7 ‘Light’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Light Reflection Refraction The eye of the camera Colour Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This is a homeschool pack designed for the KS3 Year 7 Science course, specifically the ‘P1.1 Forces’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains four pages of information, to meet learning objectives within the Year 7 ‘Forces’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Introduction to Forces Squashing and Stretching Drag Forces & Friction Forces at a Distance Balanced and Unbalanced Forces Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This is a homeschool pack designed for the KS3 Year 7 Science course, specifically the ‘P1.2 Sound’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains four pages of information, to meet learning objectives within the Year 7 ‘Sound’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Waves Sound & Energy Transfer Loudness & Pitch Detecting Sound Echoes & Ultrasound Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.