This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a definition of homeostasis and pupils will then need to discuss in pairs the conditions that they think need to be controlled by the body. This leads on to revealing these factors and looking specifically at the way in which water can be lost and gained by the body. Pupils the complete a couple of questions on the topic. Next is a focus on temperature control in the body, pupils need to consider what might happen if the temperature rises too high or falls too low and come up with ideas about how this might affect the body. Having already covered enzymes hopefully they might have some clue about what might happen. You can reveal the answer and pupils then need to complete a small worksheet to summarise these ideas. Next pupils are challenged to think about what parts of our body control our reactions, pupils are asked to complete a challenge which gets them thinking about coordination and they will then write down any organs they think were involved with this process. The nervous and endocrine system are then introduced, pupils will need to copy and complete summary sentences to describe the main structures and functions of these two systems in controlling the body. Pupils will then complete an exam question on the differences between nervous and endocrine control, the mark scheme is provided for pupils to mark their work. Finally pupils look at the role of negative feedback in the body and how this works with the example of temperature control. Pupils will need to sketch a simple graph into their books and use labels provided to demonstrate how this process occurs. Again, the finished diagram is included so pupils can assess their own work. A plenary activity is to complete an exit card listing key words, facts and to pose a question about the work covered in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap on the difference between a stimulus and a receptor and asks students to think>pair>share what the function of photoreceptors might be and where they are found. Pupils are then shown a diagram of an eye, pupils are asked to consider (from a list of structures provided) which labels might go where, they can discuss in pairs and annotate their own diagram if they know for sure. Pupils can then assess their own work when the answers are revealed on the next slide. Pupils must now learn the functions of each of these structures, they will each be given a slip of information about the function of one part of the eye and they should walk around the room and share their information to complete the table in their books. This task can be self-assessed using the answers provided. The next part of the lesson focuses on the pupil reflex, firstly a practical is undertaken whereby pupils block out light from the room and then observe what happens to their partners pupils when they bring a torch to the side of their partners eye. This leads into a description of the pupils reflex, including the role of the circular and radial muscles. Pupils will need to summarise this information by copying and completing the sentences into their book, which can be self-assessed once completed. The last activity is looking at how light is focused on the retina by the lens, pupils are shown a diagram of how this works. After being given a verbal description they are asked to firstly copy the diagram complete with labels and explain how light is focused on the retina using a list of key words that are provided. The plenary task is an exam question on what the students have learnt this lesson, pupils should complete this in silence in their books and then red-pen their work using the mark scheme provided once they have finished. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first task involves pupils discussing the definitions for a set of ecological terms, pupils can write their ideas down in their books and then watching a video to fill in any blanks they were unsure of. Once this has been completed pupils can self-assess their answers using the mark scheme provided. The next task is for pupils to think > pair> share about how animals are interdependent upon each other, they can write down their ideas as a brain storm in their books. Once this has been completed, pupils can self-assess their work using the answers provided. Pupils will then be given some information on stable communities, they will need to read this information in pairs and then try and answer a set of questions. They can then self-assess their work, correcting anything they didn’t get correct using the answers provided. Pupils will now be introduced to the difference between abiotic and biotic factors, the first task is for pupils to watch a video and sort the factors demonstrated in the video into two columns – abiotic vs. biotic. They will then be given a set of descriptions, pupils will firstly need to identify which factor is for a list provided and the second task is for pupils to identify whether this factor is biotic or abiotic. Pupils can complete this on the worksheet provided, once completed students can either self-assess or peer-assess their work, making any corrections if necessary. The plenary task is for pupils to choose two organisms from the pictures on the PowerPoint slide, they will need to describe the difference in habitats between the organisms and compare the abiotic and biotic factors which affect their survival. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lessons starts with looking at the way in which we use models to represent the structure of different compounds, models include the 3D ball and stick model, 2D ball and stick model, dot and cross diagrams and displayed formula showing bonds. Pupils are reminded of the limitations of some of these models, this is something they should be able to recount. Pupils are now shown a diagram to show how intermolecular forces act between simple covalent molecules, pupils should be able to explain the difference between the strong covalent bonds between atoms but the weak intermolecular forces between molecules and how this relates to the the low melting and boiling points of simple covalent molecules. The next part of the lesson is going to focus on giant covalent structures, firstly pupils will watch a video and answer a set of questions. Their work can be self-assess using the answers provided on the PowerPoint presentation. Students are then introduced to the three main covalent structures - diamond, graphite and silicon dioxide. Students will be given a set of information on these structures which they will need to use to complete their worksheet on giant covalent structures. To assess their knowledge of this topic there is a set of ‘quick check’ questions, pupils of a higher ability may want to complete these questions in the back of their books without discussing with others. The work can be assessed using the mark scheme provided. The last part of the lesson focuses on fullerenes and graphene - two other giant covalent structures with unique properties. Students are firstly introduced to the structure and uses of these compounds before watching a video and answering questions about them. The work from this task can be self or peer assessed using the answers provided. The plenary task is for pupils to pretend they are a scientist researching the use of nanotubes, fullerenes and grapehene, they need to come up two ideas of how these materials can be used in future technologies. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with students given some pictures of a range of people that look differently to one another, students will need to think > pair > share what the differences are between these people and the reasons why they look different to each other. Pupils will then be introduced to the difference between examples of inherited and environmental characteristics. Firstly pupils will focus on inherited characteristics, the students will need to complete a mind map in their books of the traits they have inherited from their parents (or from grandparents). As an extra challenge pupils can consider why they do not look identical to either parent. The next task will focus on environmental characteristics, pupils will need to draw a table in their books and they will need to sort examples of environmental factors with the type of environmental variation they cause into the table correctly. This work can be self-assessed once it is is complete using the answers provided. For the next activity pupils will be given a card sort of different examples of variation, e.g. height, freckles, eye colour, tattoos. Pupils will need to sort these cards into a Venn diagram in their books - just inherited variation, just environmental variation or potentially caused by both. This work can be self-assessed once it is complete. The next part of the lesson focuses on types of data - continuous or discontinuous. Pupils are firstly shown the difference between the two and then they will need to complete a worksheet to assess their understanding on this. Once completed the worksheet can be self or peer assessed. The final task is for pupils to get into teams (or be sorted by the teacher into teams) and they work their way around the room filling in information about themselves for different types of traits (e.g. handedness, foot length, whether they can roll their tongue). Pupils will assigned one trait each and will need to produce a graph of the class results. This will test their understanding of continuous vs. discontinuous data and how this should be represented in a graph format. The plenary task is for pupils to consider a world where there was no variation and discuss the advantages and disadvantages of this world, trying to use some of the key words provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Bioenergetics' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an introduction of the process of aerobic respiration including the word equations that pupils will need to learn. Next is a video, pupils will need to answer questions whilst watching the video, once it is finished they can self-assess their work using the mark scheme provided. Pupils are then introduced to the idea that aerobic respiration is exothermic and look specifically at the ultra-structure of the cell and which parts are important for respiration, this activity is a match up activity that pupils can complete and then mark. A mid-plenary is a true or false task and the final activity is a levelled worksheet pupils will complete using information cards on how animal and plant organisms use the energy released by respiration. Once finished they can self-assess using the mark scheme on the PowerPoint slides. Pupils have a choice of two activities to complete for their plenary - either an anagram challenge or a summary sentence using a list of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Chemistry GCSE, particularly the 'Atomic Structure & Periodic Table' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an introduction into the sub-atomic particles that make up an atom, pupils will need to fill in a diagram and statements to describe the position of each of these particles. Pupils will then be shown the charges and relative mass of each of these particles for a couple of minutes during a 'memory test' activity, they will then try and copy the information down into their books from memory. Next is a mid-lesson progress check where pupils will need to answer questions off the board in pairs. In the next half of the lesson pupils are introduced to the idea of atomic and mass numbers, they are firstly asked to use their periodic table to identify the atomic and mass numbers of certain elements. This work is self-assessed and then pupils are asked to think about how the number of neutrons could be calculated, once revealed pupils are then given a large table to complete to identify the atomic number mass number, plus the number of protons, neutrons & electrons for the first 20 elements. The plenary task is an exit card where pupils can identify the areas in which they feel confident with this topic and those areas they feel they need more practise with. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculations’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to relative atomic mass, including an explanation of how we can use the periodic table to find the atomic masses of different elements. In order to assess their understanding of this topic pupils will then complete a table identifying the atomic number, mass number and the number of electrons/protons/neutrons found within atoms of specific elements. This task can then be assessed using the answers provided in the PowerPoint presentation. Pupils will now think about what the formula of a chemical compound tells us about the elements found in that compound. Using examples pupils will be taught about formulae, they will then be given a list of formulae for various different chemical compounds and will need to list the different elements found in that compound as well as the number of atoms of each of the elements. This task can then be assessed using the answers provided. The next part of the lesson will focus on relative formula mass, pupils will be taught, using a worked example, how to calculate the relative formula mass for a chemical compound. They will then need to complete tasks involving the calculations of relative formula mass, once complete pupils can self-assess their work using the answers provided. The last part of the lesson focuses on moles, the definition is first introduced to pupils which can be explained further using the link the video included in the PowerPoint. Pupils are then shown how to calculate the number of moles of a substance using the relative formula mass and actual mass of a substance. Pupils will be then need to complete a set of calculations to work out the moles of different substances, this task can be assessed using the answers provided. Pupils are lastly shown how to rearrange this calculation where needed, they can then apply this skill to a new set of problems. The answers to which are included in the PowerPoint presentation, pupils can use this to assess their work. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap on the differences between elements, compound and mixture, pupils complete a task and self-assess their work. Pupils are then introduced to the idea of covalent bonding and ionic bonding as two forms of bonding and are reminded how to draw the electronic configuration of an atom, including a reminder of the rules around filling energy shells. Pupils will now watch a video on the formation of ions, whilst watching the video pupils will answer a set of questions and when finished pupils can assess their work using the answers provided in the PowerPoint. Next, pupils will be shown how to draw diagrams to demonstrate the formation of positive and negative ions, they can draw examples in their books for future reference. To assess their knowledge of this topic pupils will complete a set of questions including drawing a diagram to demonstrate the formation of an ionic bond between lithium and fluorine, this can then be self or peer assessed using the answers provided. The last task is for pupils to use their periodic table to draw the electronic structure of the ions formed from a potassium, oxygen, magnesium and calcium atom. This work will then be assessed using the answers provided. The plenary involves pupils picking a task, wither write a twitter message about what they have learnt or write a set of quiz questions to test peers on what they have learnt in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Biology GCSE, particularly the 'Homeostasis' SoW and for higher tier pupils. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to the reasons why a patient might be suffering with kidney damage and introduced to the treatments pupils will be learning about this lesson: dialysis and kidney transplants. For the next part of the lesson pupils will then need to get into four groups, two groups will read information on the treatment of dialysis and two will read information on kidney transplants. Using this information pupils will answer questions in their book and once a group has finished with one of the treatments, they should swap with another groups and answer questions about the other treatment. This task should take 40 minutes in total, once finished pupils should self-assess their work using the answers provided on the PowerPoint presentation. The last activity is for pupils to answer an exam-style question on the function of the kidneys and treatment for patients with kidney disease, once completed pupils can mark their work using the mark scheme provided. The plenary task is a 3-2-1 task, pupils write down 3 facts, 2 key words and 1 question to test peers knowledge of the topic of the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Homeostasis' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by pupils being provided with the aim of the investigation plus an equipment list, pupils will need to use this to decide what the independent, dependent and control variables of the practical may be. The next slide runs through some of the important details of the practical, using this pupils will then need to write a step-by-step method summarising how they are planning to conduct their investigation, they can work in groups to plan this but must complete their own worksheet. Next, pupil will conduct the experiment to measure the effect of a distraction on student volunteers reaction time. Results should be collected using the worksheet provided, once they have collected their raw data they can use this (as well as the calculation provided) to work out the reaction time for each volunteer in each trial, and a mean can be calculated. Once the second table of results on the calculated reaction times have been filled in pupils can complete their graph of results, this can then be used to write a conclusion using prompt questions provided on the plenary slide of the PowerPoint presentation. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical changes and electrolysis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students are firstly introduced to the idea of a displacement reaction using an example of aluminium and iron oxide, pupils will then be given a list of chemical reactions and for each one students will need to decide whether a displacement reaction will occur. Students will now conduct an investigation whereby they will place a metal - copper, magnesium, iron and zinc - into copper sulphate solution and observe what happens. Using the results from this investigation, students should decide on the order of reactivity of these metals. Students are now given another list of reactions, for each one students need to now decide if a displacement reaction will take place and if so write out the word equation for each. Students can mark their work using the answers provided. The next part of the lesson focuses on oxidation and reduction, firstly students are provided with a definition of these two processes. They are then shown how to write an ionic half equation to demonstrate what is happening what is happening during a displacement reaction, which metal has been oxidised and which has been reduced. Pupils need to complete the ionic half equations for a list of reactions, pupils can assess their work against the answers provided on the PowerPoint presentation. The last task is a progress check, students need to work their way through a set of questions to assess what they have learnt this lesson. The answers to which are included on the PowerPoint slides forstudents to self-assess or peer-assess their work. The plenary task is for pupils to write a twitter message about what they learnt this lesson, no more than 140 characters and #keywords!! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a think > pair > share task where pupils will need to discuss the definition of ‘competition’. After revealing the definition for competition within the ecology context, pupils will then need to think about the types of resources that plants and animals compete for. They will be given a set of resources, they will need to sort these resources into two columns – those that animals compete for and those that plants compete for. Once this task is complete pupils can self-assess their work using the answers provided on the PowerPoint slide. In the next activity pupils will need to draw a table in their books and they will watch a video on competition in a variety of organisms. Pupils will fill in their table by identifying the organism and then describing how it competes for the resource/s that it needs. Pupils will then be asked to think about why animals and plants may want to avoid competition, pupils can discuss with their partner and write their answers in their books. The answers can be revealed using the PowerPoint slide. Pupils can mark and check their work. The focus of the next part of the lesson is for pupils to consider how plants might avoid competition with other plants, pupils are asked to look at some pictures showing how plants avoid competition and students can discuss in pairs what they think the pictures are demonstrating. The answers to this task can then be revealed and pupils can check their answers, making any corrections where necessary. The final task is an exam-style question on competition, pupils will answer the question in their books and can then self-assess their work using the mark scheme provided. The plenary task is for pupils to summarise what they have learnt in three sentences, trying to use as many key words from the key word list provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts by pupils discussing what they think might be some differences between primary and secondary sexual characteristics in males and females. Once they have brainstormed their ideas and you have carried out a short classroom discussion you can identify the differences between these two sets of characteristics. The next slide provides students with a long list of statements describing secondary sexual characteristics of both males and females, pupils will need to sort the statements into two columns - male female - some will go into both. Once finished pupils can assess their work using the answers. Now pupils will look at the structures found in both male and female reproductive systems and the roles they play. Pupils will be shown a diagram to demonstrate these parts and then pupils will be given a blank worksheet and a set of jumbled statements, they will need to match the structures to the correct part on their diagram. This work can then be assessed to check they have correctly matched the organs and functions. Pupils will now watch a video introducing the menstrual cycle, using the video pupils will need to try and write a describe the roles each of the female hormones - oestrogen, progesterone, FSH, LH - plays in the menstrual cycle. If pupils weren’t able to get down a detailed answer they can mark and correct their work using answers provided. The final activity is an exam-style question, along with the mark scheme to check their work. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed to meet specification points for the NEW AQA Trilogy GCSE Biology 'Organisation' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy Biology, Chemistry and Physics specifications please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will firstly be introduced to guard cells and stomata and how they are able t control the loss of water from the plant, diagrams of guard cells turgid and flaccid will help with this description. Pupils will then be given a set of questions which they will complete using a video, once completed pupils can then assess their work using the answers provided. The next slide shows the process of transpiration, pupils are shown a diagram and then descriptions of each stage in the transpiration process are shown stage by stage. You may need lower ability pupils to copy the stages up off the board in note form first. For higher ability pupils after you have gone through it a couple of times you can move the slide forward and pupils will need to write a description of the process of transpiration using the list of key words and diagram as a cue. After this has been completed pupils will then focus on the factors affecting the rate of transpiration, pupils will each be given a slip of information about a factor and how it affects the loss of water from the plant. Pupils will need to swap information with those around them to complete their table. If pupils do not quite finish this task they can assess their work using the completed table provided in the PowerPoint. The last activity is for pupils to complete exam questions on the topic of the lesson. Pupils will be given 6 minutes as it is worth 6 marks, they should try and complete the question in silence at the back of their books if possible. The plenary task is for pupils to write down 6 key words from the lesson. All resources are included in the PowerPoint slides, please let me know if you have any questions in the comments section and leave feedback if you download and use :) thanks!

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Molecules & Matter ’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a definition of density as well as the calculation (and units) for density. Students can take notes using the PowerPoint presentation and then work through the worked example on the board, before the answer to this question is revealed. Students will now need to rearrange the equation in order to calculate either the mass of the object or the the volume of the object. Students will now copy and complete a table on the different densities of materials, using the equations written in their books they will need to calculate the mass/volume/density of these materials. The mark scheme for this work is included in the PowerPoint presentation so students can self-assess their work once it is complete. Students will now focus on the ‘Maths Skill’ of converting units into standard form, an example if first given to students before they work through a set of numbers - converting to standard form. Students can self-assess their work using the answers provided once this is complete. Students will now work their way through a set of questions, some ‘exam-style questions’ on density. Students must show all their working, the mark scheme for these questions is included in the PowerPoint so students can self-assess their work once it is complete. The next part of the lesson demonstrates to pupils how they can work out the density of a solid object with an irregular shape, as well as the density of an unknown liquid. Students are shown the steps needed to calculate the density of these substances, they will then be given a set of problems to work through. Once complete students can self-assess their work using the mark scheme provided. The final two tasks are firstly a past-paper exam question and then a ‘True or False’ activity - both to assess students knowledge of what they have learned this lesson. The plenary task requires pupils to write down three sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson which meets specification points within the AQA Biology Trilogy - Cells SoW. The lesson begins by pupils using posters around the room to complete a levelled worksheet on the structure and function of animal and plant cells. Pupils will then peer-assess their work, providing feedback of the grade each pupil achieved and ways to improve their work. Pupils will then complete a 'revision' task in the back of their books, they will need to stick in a sheet and match the structure to the function. Pupils can self-assess their work. The final task, an assessment task, involves pupils answering a past-paper questions. They should try and do this with their book closed to test their knowledge of what they have learnt this lesson. Pupil can then either peer-assess or self-assess their work. All resources are included, please review with any feedback :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Resources’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a task whereby pupils need to use their phones/laptops to research the dates in which different metals were discovered. They should complete the table in their books and then write a sentence to summarise the relationship between the date in which the metal was discovered and it’s reactivity. The first part of the lesson now focuses on extraction of copper from copper-rich ores, two methods are firstly introduced - smelting and extraction using sulfuric acid. Pupils will then be given a set of information on these processes and will need to answer a set of questions, once complete pupils can self-assess their work using the answers provided. The next part of the lesson will require pupils to undertake a practical investigation whereby they will extract copper from an ore called malachite, an ore which contains copper carbonate. Students will need to follow the instructions provided and will then need to note down their observations of the electrode at which the copper will collect. A summary and explanation of the results will then be provided via the PowerPoint presentation for pupils to check their work. Lastly, pupils will watch a video about low-grade copper ores and the processes of phytomining and bioleaching for the extraction of copper from such ores. Pupils will need to answer a set of questions whilst watching this video, this work can be self-assessed using the mark scheme provided. The plenary task is for pupils to write a list of key words from what they have learned in the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please email me at swift.education.uk and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Homeostasis' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a think > pair > share task asking pupils to consider the different ways in which males, females or both could potentially find difficulty in conceiving a baby. Images are shown in order to prompt students to think about the anatomy of the male and female reproductive system. Answers will then be provided, pupils can check their ideas against those shown on the PowerPoint slide and red-pen their work. The next task is a fill-in-the-blank task on the role of FSH and LH during fertility treatments, pupils will need to consider the job of these two hormones in a healthy woman (covered during the menstrual cycle lesson) and then summarise how these hormones are used in fertility drugs. This work can be assessed using the answers provided once complete. The next part of the lesson focuses on how in vitro fertilisation works, pupils will be shown diagrams and descriptions of the stages involved with this process. Extra challenge questions are provided at the bottom of the worksheet should some students complete their work quickly. Pupils will then need to complete a worksheet o summarise these steps, once completed this work can be assessed using the mark schemes provided. Finally, students will need to consider the advantages and disadvantages of IVF. They will be given some information, one between two, they will need to use this information to summarise the pro's and con's of IVF. For the last task pupils will be given opinion cards in groups, they should read out the opinion cards and discuss which one's they agree with and why. They should then write a conclusion of their own opinions on IVF in their books, using as many valid scientific points as possible. The plenary task is for pupils to write a twitter message about what they have learnt that lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson designed to meet specification points for the new Biology Trilogy 'Bioenergetics' scheme of work. The lesson begins by focusing on the location of the main organs in the plant, students are then asked to match the name of the organs to their function. Once this work is self-assessed pupils will watch a video which will outline some of the adaptations a plant has that enables it to carry out photosynthesis. Pupils are then introduced to the major tissues in the leaf of a plant and are given some information on the location, structure and function of these tissues. Using this information pupils are required to complete a worksheet labelling a cross-section of a leaf. Once finished, pupils can use the mark scheme within the PowerPoint presentation to check their work. Students are then asked to consider why plants and the process of photosynthesis is so important. They are reminded of the fact that plants are needed to harness sunlight energy and synthesise organic molecules like glucose which not provides energy to the plant but to all organisms further up the food chain. The final activity is a past-paper question worksheet that pupils should complete in silence, once finished they can either self-assess or peer-assess using the mark scheme provided. The plenary is for students to summarise what they have learnt in the lesson by writing 3 facts, 2 key words and posing 1 question to their peers. All resources are found at the end of the PowerPoint presentation. Thank you for purchasing :)