This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Electricity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a video on electrical current and charge flow, students will need to answer a set of questions whilst they are watching the video. This work can then be self-assessed using the mark scheme provided. Next, is a ‘Quick Check’ task where students will need to answer a set of questions using the calculation for rate of charge flow. Students will need to show their working for each of these questions, the answers are provided on the PowerPoint presentation so students can check their work against the mark scheme, making corrections where needed. Next, the lesson introduces the formula for calculating the energy transferred to components within a circuit. Students can take notes using the PowerPoint presentation and then using the formula they should work their way through another ‘Quick Check’ task. The mark scheme for this task is also included in the PowerPoint presentation for pupils to self or peer assess their work. The final part of the lesson focuses on energy transfers within a circuit. Firstly, a worked problem is shown to students before they have a go at working their way through another ‘progress check’, using knowledge of what they have learned so far this lesson. The plenary task requires pupils to write a twitter message about what they have learned in the lesson, this must include #keywords! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap of particle arrangements in an element, compound and a mixture. Students will be asked to ‘Think > Pair > Share’ their ideas, drawing a diagram of the particle arrangement in each as an extra challenge. After a short discussion, the answers will be revealed so students can check their work. The next task requires students to organise a set of statements into two columns - those statements describing a mixture or describing a compound. This task can then be self-assessed using the mark scheme provided once complete. Students are now asked to ‘Think > Pair > Share’ their ideas about what the term ‘pure’ means. After a short class discussion, the definitions (along with examples) for pure and impure substances are provided. Students will now complete an investigation to test three different water samples for purity. Using a pH test and an evaporation test students need to decide which of the samples are pure and which are impure. Students will have the chance to report their findings to the rest of the classroom, explaining their thoughts on which samples were pure/impure. Lastly, students will watch a video on chemical tests used to check the purity of a substance. Students will need to answer a set of questions whilst watching this video, the answers to which are included in the PowerPoint so students can self-assess their work once it is complete. The plenary task requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Ecology’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Ecology’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Cells’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ SoW, students can either have a card each and the activity can be completed as a card loop with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like domninoes tiles). When students carry out this version of the activity I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Organisation’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Organisation’ SoW, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Organisation’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Organisation’ SoW, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Organisation’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Organisation’ SoW, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a video about the developments in the atomic model starting from Greek philosophers to 20th Century scientists. Pupils are given a set of questions to answer whilst watching the video, this work can be self-assess using answers provided. Next, pupils are given a set of cards with bits of information about different scientists involved in the development of the model of the atom. Pupils should put these cards in order and then use the information on the cards to formulate a timeline in their books, they should use the information on the cards to add labels describing the work of each of the scientists. Students will now be shown a video on ‘Scattering Experiments & the Development of the Nuclear Model’ - students will need to answer a set of questions whilst watching the video. The answers to the video are included in the PowerPoint so students can self-assess their work once it is complete. A diagram of the ‘Gold Foil Experiment’ is then shown to pupils, along with a summary of conclusions drawn from this investigation. Students will then be given a worksheet to complete, summarising the findings of this investigation and how it contributed to the development of the Nuclear Model of the atom. The mark scheme to this task is also included in the PowerPoint for pupils to assess their work. The plenary task is a word search, students will need to find a list of key words on the topic of ‘radioactivity’. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an image of two atoms - one with less neutrons in the nucleus and one with more. Students are asked to ‘Think > Pair > Share’ their ideas about what make the atoms different from one another. Next, students will be given a set of questions which they will need to answer whilst watching a video. The students will complete this task and once finished they will be able to mark their work using a the mark scheme that is provided on the PowerPoint presentation. Students are now introduced to the idea of radioactive decay, students will be shown another video about ionising radiation. They will need to answer a set of questions whilst watching the video, the work can be self-assessed using the mark scheme available. The latter part of the lesson focuses on the properties of alpha, beta and gamma radiation. Posters of information will be posted around the room, students will need to read this information and use this to answer a set of questions. The mark scheme is included so students can mark and correct their work. The last task requires students to determine the number of protons and neutrons found within radioactive sources which have undergone alpha/beta decay. Students can then mark their work once it is complete. The plenary task is for students to write a twitter message to demonstrate what they have learned today, making sure they #keywords. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to chromatogrpahy, students are shown a diagram to demonstrate this process, they can also take additional notes in their books. Students will now watch a video on chromatography, whilst watching this video they will need to arrange a set of statements in order to correctly describe the process of chromatography. Students can then self-assess their work once it is complete, using the mark scheme provided on the PowerPoint presentation. Next, students will follow the method the have just arranged in their books to carry out their own chromatography practical. This can be completed in groups of 2 or 3, their chromatogram can then be stuck in their books once complete with their conclusion and evaluation completed underneath. Students will now complete a ‘Quick Check’ task, this is a couple of questions to assess students knowledge of what they have learned so far this lesson, the answers to which are included so students can self-assess their work. The last part of the lesson focuses on why chromatography is useful, each students will be given an information card which has a description of one use of chromatography. Students will need to walk around the room, sharing information with each other to complete the summary table. Once this task is complete, students can self-assess their work using the mark scheme provided in the PowerPoint. The plenary task requires students to write a list of key words that they have learned from this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a description of a solution, students can make a note of this in their books and then ‘Think > Pair > Share’ their ideas about examples of solutions they know. After a short discussion in pairs and as a class, some example answers are revealed to students. Next, students are introduced to the key terms - solute, solvent and solution - given the example of salt being dissolved in water to produce a saltwater solution. The process of dissolving is explained using particle theory, using a particle diagram to help demonstrate the concept. Students will then be asked to come up with a role-play to demonstrate the process of dissolving, some groups can show this to the rest of the class. Students will now complete a fill-in-the-blank worksheet to assess their knowledge of what they have learned so far this lesson, this can be marked and corrected using the mark scheme provided. Lastly, students will be shown how to work out the total mass/volume of a solution given the mass/volume of the solute and solvent. Students will then work through a set of problems, the answers to which are included in the PowerPoint so students can self-assess their work using the mark scheme provided. The plenary task requires students to write a twitter message to summarise what they have learned this lesson, including #keywords. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a ‘Think > Pair > Share’ task, students are asked to describe what happens when salt is mixed with water, using the particle model to help them with their explanation. After a short discussion, a diagram is revealed to show students what happens when more and more salt is added to water, eventually reaching a saturated solution. Students will now be provided with a definition for ‘solubility’, following this students will complete a task whereby they will match the key word to the correct definition. Students can self-assess their work once this is complete. Next, students will complete an investigation to work out how much sugar can be dissolved in 100g of water - an equipment list and method is provided for students to follow. Students will now be given some data on the solubility of two salt compounds - potassium chloride and sodium chloride - as temperature increases from 0-100 degrees celsius. They will be required to draw a graph to display this data and describe the relationship between temperature and solubility. This work can be self-assessed once it is complete, using the mark scheme provided. Lastly, students will complete a ‘copy and correct’ task where they will need to copy a paragraph into their books and make amendments so that it correctly summarises what students have learned this lesson. The plenary task is a 3-3-1 reduction, students will need to write down three facts, three key words and 1 question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to the process of filtration, students are shown a diagram and are provided with an description of a method for filtering a mixture. After this, students are provided with a jumble of statements, they will need to order these statements to correctly describe the method of filtration, this task can then be self-assessed using the answers provided. Students will now watch a video on evaporation, students will need to answer a set of questions whilst watching this video. Once students have completed this task, they can mark their work using the answers provided on the PowerPoint presentation. Following this, students will complete a practical to make copper sulphate crystals. The next part of the lesson is on distillation, students will be shown the apparatus used to carry out distillation and will need to copy and complete a paragraph of information to summarise this process. This task can then be marked using the mark scheme provided. Following this, students will be provided with another set of jumbled statements which they will need to order to correctly describe the method of distillation. The answers to this task are included so students can self-assess their work using the mark scheme provided. The plenary task requires students to summarise what they have learned this lesson in three sentences. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This is a homeschool pack designed for the KS3 Year 8 Science course, specifically the ‘C2.1 The Periodic Table’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains eight pages of information, to meet learning objectives within the Year 8 ‘The Periodic Table’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Metals & non-metals Groups & periods The elements of Group 1 The elements of Group 7 The elements of Group 0 Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This is a homeschool pack designed for the KS3 Year 8 Science course, specifically the ‘P2.1 Electricity & Magnestism’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains eight pages of information, to meet learning objectives within the Year 8 ‘Electricity & Magnetism’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Charging Up Current & Charge Potential Difference Resistance Series & Parallel Circuits Magnetism & Magnetic Fields Electromagnets Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P2 ’Sound’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students will firstly be introduced to the main features of a wave - amplitude, frequency and wavelength. Students can sketch a diagram of a wave into their books and take notes on the main features. Students are now introduced to transverse and longitudinal waves, students will need to know the differences between the direction of the oscillations of these two waves. Students are then asked to discuss how a ‘slinky’ could be used to demonstrate these two waves, after a short class discussion students can be shown an animation to demonstrate how a slinky shows these two types of wave. Students will now get into groups and come up with a short role-play to demonstrate the differences between these two waves. Students will now complete a progress check where they will need to copy and complete a paragraph to summarise what they have learned so far this lesson. This task can then be self-assessed using the mark scheme provided. A diagram of a longitudinal wave which shows the differences between rarefactions and compressions is shown to students, they will then need to answer a set of questions. The answers to this task are included in the PowerPoint so students can self-assess their work once it is complete. Next, students will need to ‘Think > Pair > Share’ their ideas about what happens when two or more waves join together. Students can discuss their ideas first before being shown a video demonstrating the process of superposing waves. Students will then complete a fill-in-the-blank task to summarise what they have learned this lesson. The plenary task requires students to write a WhatsApp message to tell their friends what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculations’ SoW and specifically designed for higher tier GCSE chemistry students. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson starts with students learning how to calculate the concentration of a solution in mols/dm3 when you know the mass of the solute in the solution. Students learn the steps necessary to complete this calculation, they can then complete a set of problems. This work can be self-assessed using the answers provided in the PowerPoint presentation. Students are then asked to discuss how they might work out the mass of a solute in a solution when they know the volume and concentration of a solution. After a short class discussion, the PowerPoint reveals four steps students should work their way through when approaching a problem such as this one. Students are then given two further problems to have a go at, they should show their working at each step of the calculation. Answers to the questions, as well as working out, is included in the PowerPoint presentation. Students are then given a worksheet, including a worked example of how to use a titration to calculate the concentration of a unknown substance. Using the worked example as a guide, students should attempt to answer the questions on the worksheet. For lower ability students it will be worth going through the worked example on the board first, those very able students should be able to use the worked example as a guide when answering the other questions Once this task has been completed students should self-assess their work using the mark scheme provided. The last task is a titration practical, their is a worksheet included in the PowerPoint for students to use as guide when completing the practical - including an aim, equipment list, method and results table. Once they have completed the investigation they should be able to use the balanced symbol equation to calculate the concentration of sulfuric acid used in this titration. The plenary task is for pupils to write down 3 key words, 2 facts and a question to test their peers on what they have learned today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P2 ’Sound’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts with a ‘Memory’ Test, students will be shown a diagram of the ear with labels identifying the key parts that they need to know. Students can spend a few minutes looking at the diagram, the labels will then be taken away and they will need to try to annotate a copy of the diagram as best as possible. The labels will then be added to the diagram so students can mark and correct their work. Next, students will watch a video on how the ear, and the brain, is able to detect sound. Students will be given a set of questions to answer whilst they watch the video, once this task is complete students can self-assess their work against the mark scheme provided. The next part of the lesson focuses on the ways in which the ear can be damaged, students should firstly ‘Think > Pair > Share’ their ideas about how the ears/hearing can be damaged. The answers will then be revealed so students can assess their work and note down any they didn’t get. Students will then carry out a ‘Doctor’ role-play, where each group will have somebody with a particular problem. The students need to work out what the problem is, explain what the problem is and work out the best way to treat it. This can be acted out as a doctot-patient scene. Lastly, students will complete a progress check to assess their understanding of what they have learned so far this lesson. This task can be completed in their books and can be self-assessed or peer-assessed using the mark scheme provided. The plenary activity requires students to write a question about the component of the ear to test their peers understanding of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculations’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction of concentration, students learn the definitions of key words such as solute, concentration, solvent and dilute and look at the difference between concentrated and dilute solutions. Students will then be shown a selection of diagrams and students will need to which shows the most concentrated and the most dilute solutions. Pupils will now be introduced to the calculation for concentration, students will need to use this calculation to work out a set of problems. Students can self-assess their work using the answers provided. The next set of problems will require pupils to rearrange the equation and also convert units of measurements, again pupils should show all of their working for each of these problems. The answers for these problems are included in the PowerPoint presentation, students can now use this to self-assess their work. The next part of the lesson focuses on titration, firstly students will answer a set of questions whilst watching a video. This work can be assessed using the mark scheme provided. Students will then be given a card sort, they will need to rearrange the cards into the correct order to describe the steps taken during a titration, which can then be assessed using the answers provided. The plenary task is for pupils to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)