This is a homeschool pack designed for the KS3 Year 7 Science course, specifically the ‘P1.2 Sound’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains four pages of information, to meet learning objectives within the Year 7 ‘Sound’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Waves Sound & Energy Transfer Loudness & Pitch Detecting Sound Echoes & Ultrasound Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P1 ’Forces’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a short video about light-years, students will watch the video and will need to answer to two questions whilst watching. This task can then be self-assessed using the mark scheme provided. Next, students will now each be given a piece of information about an object which is visible in the night sky - comets, meteors, planets (some!) and satellites. Students will need to swap information with people around the room in order to complete a summary table. Once complete students can use the mark scheme provided to self-assess their work. Next, students are introduced to the definitions for the terms ‘galaxy’ and ‘Universe’, which students could take notes on. Now students will complete a progress check, which is a set of questions aimed to assess students knowledge of what they have learned so far this lesson. This task can be either peer-assessed or self-assessed using the mark scheme provided. Lastly, students will be asked to create three quiz questions (which they should know the answers too!) to test their peers knowledge of what they have learned this lesson. If there is time, students can then read some of their questions out and ask particular students in the class. The plenary activity is an anagram challenge, students are given a set of anagrams of key words learned this lesson. The answers are provided to check they are correct! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a homeschool pack designed for the KS3 Year 7 Science course, specifically the ‘P1.3 Light’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains four pages of information, to meet learning objectives within the Year 7 ‘Light’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Light Reflection Refraction The eye of the camera Colour Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P4 ’Space’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an video on the Solar System, students will watch this and whilst watching should answer a set of questions. Once students have completed this task, they can self-assess their work using the mark scheme provided. In the next activity, information stations will be placed around the classroom so that students can gather information and use to this to complete a worksheet. They can talk to each other to complete this task, once it is complete the work can be self-assessed using the mark scheme provided. This task also includes a research project, so if students have completed the work they can use tablets/computer/laptops/phones to complete research on the Cassinni Space Probe. The last task requires students to complete a crossword on the Solar System, using what they will have learned over the last couple of lessons. The plenary task requires students to summarise what they have learned this lesson in three sentences, a list of key words is provided for pupils to use in their sentences. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P4 ’Space’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the phases of the Moon, students are shown a diagram which show the changing appearance of the Moon as seen by Earth as the Moon orbits the Earth. The next task is a memory test, students will be shown images of the different phases of the Moon along with the names of these specific phases. Students will need to memorise the as many names as possible, before the names are taken away. Students will now have a few minutes to fill in their worksheet with the correct names, this task can then be self-assessed using the mark scheme provided. Next, students will complete a worksheet which requires them to shade in circles to show the phases of the Moon at particular positions. There is an extra challenge task to add labels to show the names for each phase. The mark scheme for this task is included in the PowerPoint so students can mark and correct their work. Next, students will watch a video on eclipses. Whilst watching the video they will answer a set of questions, once complete students can self-assess their work using the mark scheme provided. Laslty, students will complete a ‘copy-and-complete’ task to summarise what they have learned this lesson. This work can also be marked using the answers provided on the PowerPoint. The plenary task is a ‘pick a plenary’ - either unscramble a set of anagrams to spell five key words taken from the lesson today or use a set of key words (provided) to summarise what students have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the definition for ‘gestation’ - students are then asked to match the mammal to the correct gestation period length, from the selection provided. This task can be marked once it is complete. Students are then asked to consider the advice that a midwife might give to a pregnant woman, regarding her health and her baby’s health. After a few minutes of partner discussion, students can feed back to a class discussion where hopefully factors such as diet, alcohol consumption and smoking are mentioned. During the next part of the lesson, students will need to walk around the room reading posters of information on the development of a fetus inside the uterus. Students will need to complete a worksheet using this information, the mark scheme for this task is included in the PowerPoint so students can self-assess their work or peer-assess their work once the task is complete. The last activity is a ‘Human Bingo’ task, each student is given the same grid - each box of the grid contains a different question. Students need to walk around the room and get a different student to answer each of the different questions on the grid - once complete they can sit down and shout ‘Bingo!’. The plenary task requires students to come up with five questions for the five answers that are provided on the PowerPoint. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’ module. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to chemical reactions, students will read a paragraph of information on chemical reactions. Using the information students will answer a set of questions, this task can then be self-assessed using the mark scheme provided once complete. Students will now watch a video about chemical reactions, they will need to write down as many things you might see/hear/feel during a chemical reaction. This work can the be self-assessed using the mark scheme provided on the PowerPoint presentation. Students will now summarise what they have learned so far by completing a ‘fill-in-the-blank’ task, this work can also be marked and corrected using the anwers provided Students will now consider whether chemical reactions are useful or now, they will be given a list of different chemical reactions and they will need to sort these into two columns - useful or not useful. Students can then self-assess this task when it is complete. Next, students will watch a video on the differences between chemical and physical changes. Whilst watching the video students will need to answer a set of questions, this work can self-assessed using the mark scheme provided. The last task requires students to determine whether a set of examples are demonstrating a chemical or a physical change. They could complete this task as a class, using mini whiteboards. The plenary task requires students to write three sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on the differences between elements, compounds and mixtures. Students will be given a set of diagrams and will need to decide which is which, they could write their answers down in their books or use mini white boards and complete as a class. The answers can then be revealed using the mark scheme provided and students can check their answers. Students are then given an explanation of what happens to substances during a chemical reaction, atoms rearrange and new bonds form new substances with different properties. The example of iron sulphide is used, a demonstration could also be carried out to show that iron (in a mixture of iron and sulphur) is magnetic before it is heated. Once iron and sulphur are heated to form iron sulphide, the magnetic properties are now lost. Students are now shown the basis of a word equation and the difference between reactants and products. They will then be given two word equations and will need to determine which are the reactants and which are the products, the answers will then be revealed. They will then be given four more reactions, students will need to identify the reactants and products of these reactions. Students can then self-assess their work using the mark scheme provided. Students will now try writing their own word equations using a description provided, students will need to complete a worksheet of these tasks. The answers to these questions are included in the PowerPoint for students to self-assess their work. Lastly, students will complete an investigation to observe what happens during three chemical reactions. Students will be given the practical worksheet, they can complete the investigation as a group and note down their observations from the reactions. Once the investigation is complete, students will then need to match the reactants from the reactions they carried out with the correct products. This work can then be marked and corrected using the answers provided. The plenary task requires students to write a twitter message summarising what they have learned today, students should #keywords! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with a definition for a fuel and then students need to ‘Think > Pair > Share’ their ideas of examples of fuels they already know. The answers can then be revealed on the PowerPoint for students to self-assess their work. Students are then asked to think about the conditions required for things to burn, students can discuss their ideas with each other before feeding back to the class. The answers can then be revealed using the PowerPoint presentation. Students can now summarise what they have learned by completing a ‘fill-in-the-blank’ task, this task can be self-assessed once it has been completed, using the mark scheme provided. Next, students are asked - ‘What would happen if a glass was placed over a candle? And why?’ - students can discuss their ideas in pairs/groups before feeding back to the class. The answer can then be revealed using the answer provided on the PowerPoint presentation. Next, students are introduced to the idea of renewable v.s non-renewable fuels, students are given examples of non-renewable fuels and are then shown a video on hydrogen as a renewable fuel. During the video, students will need to answer a set of questions, this can then be marked and assessed using the mark scheme provided. Students will now conduct an investigation into the energy released by different types of fuel - candle vs. ethanol. Students will heat a boiling tube of water using both of these fuels for a set period of time, using a thermometer to check the temperature every minute they will determine which released the most amount of energy. Lastly, students are introduced to the idea of an ‘oxidation’ reaction - they can take notes in their books of examples of oxidation reactions. The plenary task requires students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with a video on decomposition reactions, students will be given a set of questions which they will need to answer whilst watching the video. The mark scheme to this task is included in the PowerPoint, so students can self-assess their work once it is complete. Students now know what a decomposition reaction is, they are now asked to consider what they think a thermal decomposition reaction might be. Students ‘Think > Pair > Share’ their ideas, eventually feeding their ideas back to a class discussion and the answer can be revealed using the PowerPoint so students can check their answers. Next, students will complete an investigation to determine which metal carbonate will decompose the quickest. Students will be given a practical worksheet, they can work their way through the steps and write their results in the results table provided. Once students have collected their results, they are asked which type of graph would be most suitable to present their results. Students can discuss their ideas before feeding back into a class discussion, the answer is then revealed as a bar chart as we are dealing with discrete data. Students can then plot their results onto a graph. The plenary task is a ‘pick a plenary’ activity - students will either summarise what they have learned in three sentences or they can write a definition for a list of key words from the last few lessons. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C3 ’Reactions’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to different examples of exothermic reactions, this includes video links to more exciting exothermic reactions like the thermite reaction and the screaming jelly baby. Students are also told the definition for an exothermic reaction. Students are now asked to consider what an endothermic reaction is, now that they know the definition for an exothermic reaction. Students are asked to ‘think > pair > share’ their ideas, eventually feeding back into a class discussion and the definition can then be revealed, as well as two two examples. Students will now watch a video on exothermic and endothermic reactions, whilst watching the video they will answer a set of questions. Once this task has been completed, students can self-assess their work against the mark scheme provided on the PowerPoint. Students will now complete an investigation to identify whether a set of three chemical reactions are exothermic or endothermic. They will start the reaction and then measure the temperature over a set period of time, finally working out the change in temperature to determine which type of reaction has occurred. Students can follow instructions on the practical worksheet and record their results in a table drawn into their books. Finally, students will complete a ‘quick check’ task - whereby they will need to answer a question on the topic of the lesson, this can then be checked against the answer provided on the PowerPoint. The plenary task is an anagram challenge, students need to unscramble a set of anagrams which then spell out a set of key words from the last few lessons on reactions. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P3 ’Light’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins by students being shown a video of a laser show, students will need to note down their observations about how light travels. Hopefully students should identify that light travels in straight lines - a diagram can be shown to students to identify this. Students are also shown a diagram which demonstrates how shadows are formed. Next, students will be given the definition of a luminous and non-luminous object. Students will need to come up with their own examples of luminous and non-luminous objects and write their ideas down into their books, under two headings. This task can then be self-assessed using the mark scheme provided, as well as other suitable suggestions. Students will now be shown some pictures of objects which are either opaque, transparent or translucent, students should now ‘Think > Pair > Share’ their ideas about how to group these images. Hopefully, students should identify the three categories, this will be revealed as part of a class discussion. Students will now be given some time to come up with their own definitions for the terms: opaque, transparent and translucent and should come up with their own examples. This task can then be self-assessed using the mark scheme provided. The next part of the lesson focuses on the speed of light, students will be given the speed of light and will be introduced to terms such as light-second, light-minute and light-year. Students will then be asked a question ‘What travels faster - light or sound? Give examples as evidence’. Students can discuss in pairs, writing their ideas down in their books. This can then be self-assessed using the mark scheme provided. The last task requires students to complete a ‘Progress Check’ - students will fill in the blanks to complete a paragraph of information summarising what they have learned today. This work can be marked and corrected once complete. Lastly is a true or false activity which students can either complete in their books or using mini whiteboards. The plenary task requires students to complete an ‘Exit Card’ to summarise three things they have learned, five key words and one question to their peers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P3 ’Light’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on what was learned last lesson - students will be given a set of three descriptions and will need to decide which group of materials it is describing. This task can then be checked using the answers provided. Next, students are shown (with a diagram) what happens when light hits a reflective materials such as a mirror. The incident ray, reflected ray, normal line and angles of both incidence and reflection are labelled - students can sketch a diagram of this into their books. They then need to complete the ‘fill-in-the-gap’ task which outlines the law of reflection - the angle of incidence is equal to the angle of reflection. Students are then shown the different reflections which can be produced by different surfaces - diffuse or specular. Students can consider why a clear image is produced by a smooth surface and why a blurry image is produced by a rough surface. After a short class discussion, students can take notes of this in their books, along with sketches of the two types of reflection. Next, students will get to investigate the law of reflection. They will be given a practical worksheet which outlines a method by which students will direct a beam of light from a ray-box to a mirror, they should measure the angle of incidence and angle of reflection. This should be repeated with various angles of incidence, their results can be recorded in the table provided. Next, students are asked a set of progress check questions to test their knowledge of what they have learned so far on reflection. This task can be self-assessed once it is complete, using the mark scheme provided on the PowerPoint. The plenary task requires students to complete one of the following ‘sentence starters’ that are provided to provide a summary of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P3 ’Light’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an explanation of how the different parts of the eye work together in order for you to see objects. The functions of different parts of the eye are briefly explained. Students will then need to complete a task to assess their knowledge of this introductory information, this can be self-assessed using the mark scheme provided. This leads onto another task which looks at the function of different parts of the eye, students will each be given a different piece of information outlining the function of one part of the eye. Students will then need to walk around the room, sharing information with each other to complete a table on the functions of eye parts. This task can be marked using the answers provided. Students will then be shown an image of a pinhole camera, they will need to sketch a copy of it into their book. They are then asked a few questions which looks at the similarities between a pinhole camera and the eye, students should answer these questions in their books and once complete they can mark their work using the answers provided. Students are then provided with some information comparing the structure and function of eyes compared to a digital camera. Students will need to outline one way in which they are similar and one way in which they are different, this task can also be assessed using the answers provided. Lastly, the plenary task requires students to write down three sentences to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P3 ’Light’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students are firstly introduced to the idea of ‘white light’ being split up into the colours of the rainbow. They are then shown a diagram of a ray of white light hitting a prism, which then leads to the refraction of this light - showing the colours of the rainbow from red to violet. Students can sketch a diagram of this into their books, indicating the most refracted and least refracted colours. Students are then shown a diagram which indicated how primary colours can be mixed together in various combinations to make secondary colours. The next part of the lesson, students will focus on how we observe different coloured objects. White light will bounce off an object, the colour the object appears depends on the colour of light that it reflects. Various diagrams are shown to students to demonstrate this point, they could sketch a copy of one of the diagrams or draw their own version in their books. They are then given a worksheet to assess their knowledge of what they have learned so far this lesson, extension questions are included for higher ability students. This work can be self-assessed using the mark scheme provided once it is complete. Students are now shown what happens to the appearance of objects when they are seen in coloured light rather than white light - coloured objects will only reflect the colour it is and will absorb any other colours - which means it appears to be black. Lastly, students are shown how filters are used to subtract light. Students will then complete a progress check to assess their knowledge of what they have learned this lesson, the mark scheme for this task is included on the PowerPoint. Students can then self-assess their answers using the mark scheme provided. The plenary requires students to write down 3 facts from the lesson, 3 key words and 1 question to test their peers knowledge of what they have learned. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P1 ’Forces’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a video which introduces students to forces, students will watch a video and will need to answer a set of questions whilst watching. This task can then be self-assessed using the mark scheme provided. Students will then be asked to ‘Think > Pair > Share’ their ideas about the differences between a contact and a non-contact force. Once they have had chance to discuss their ideas and feed back to the class, the definition for both contact and non-contact forces can be revealed for students to check their answers. Students will then be shown a set of diagrams of either contact or non-contact forces, students will need to sort these into the correct columns. This work can be marked and corrected once this task is complete. Students will now be shown how force diagrams can be drawn, to indicate the size and direction of a force acting upon an object. Students will then need to draw force diagrams for a set of objects, a worksheet for this task in provided. This work can then be self-assessed using the mark scheme provided on the PowerPoint. Lastly, students will be given the definition for an ‘interaction pair’, as well as an example to help contextualise this meaning. Students will then need to complete a progress check (‘copy-and-complete’ task) to assess their knowledge of what they have learned this lesson. This work can be self or peer assessed using the answers provided on the PowerPoint. The plenary task is for students to spend a minute talking to the person next to them about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P2 ’Sound’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a definition of ‘Friction’, students can take notes on this and then ‘Think > Pair > Share’ their ideas about how friction can be reduced. Two ideas that are then revealed are lubrication using oil/grease or smoothing surfaces down in order to reduce friction. Students will then need to complete worksheet on frictional forces, once students have completed this task they can either self-assess or peer-assess their work using the mark scheme provided. Next, students are introduced to the idea of a ‘drag force’, including the examples of air resistance and water resistance. Students will then need to create a mind map listing the ways in which the effect of drag forces could be reduced. Once students have discussed and noted their ideas down, their answers can be checked using the answers provided on the PowerPoint. In the last activity students will be given a set of statements, they will need to sort these statements into either either a ‘True’ or ‘False’ column. Students can then self-assess or peer-assess their work using the mark scheme provided. The plenary task is a ‘Pick a Plenary’ - so students can either summarise what they have learned in three sentences, or write a definition for a list of key words that students would have learned over the course of the ‘Forces’ topic so far. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P1 ’Forces’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a recap activity, students will need to sort a list of forces into two categories: contact and non-contact forces. This task can the be self-assessed using the mark scheme provided. Next, students will recap on the non-contact forces that they have already learned about: gravitational forces, magnetic forces & electrostatic forces. Students will the be asked ‘What is a Force Field’ - they will then need to ‘Think > Pair > Share’ their ideas. After a short class discussion, the answer can be revealed to students and they could take notes on this in their books. Students will carry out an investigation which helps them to visualise the force field which surrounds a magnet. Students will place small compasses at pin-point positions surrounding a bar magnet. They will need to draw an arrow to represent the direction that each compass is facing, lines can be drawn between each position which will show the overall force field of the bar magnet. This task can be self-assessed using the mark scheme provided on the PowerPoint. Next, students are told the difference between weight and mass, they are also given the calculation for the weight of an object when you are given the gravitational field strength of the planet the object is found on, plus the mass of the object. Using this calculation students will then need to complete a set of questions on weight & mass, once complete students can self-assess their work using the mark scheme provided. The last task is a ‘Progress Check’ task, whereby students will copy and compete the paragraph of information to summarise what they have learned this lesson. The plenary task requires students to write a twitter message to sum up what the students have learned in the lesson, they will need to try to #keywords. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 P1 ’Forces’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with ‘Think > Pair > Share’ activity which asks students to look at a photo of a tug-of-war and asks students to decide which side would win and why. After a short discussion, students will be introduced to the idea of ‘balanced’ and ‘unbalanced’ forces, including examples. Students will now complete an investigation on ‘Forces’, this is a circus activity which requires students to decide which two forces are acting on each of the objects. Students will also need to decide if the forces are balanced or unbalanced, their results can be recorded in the table provided. Students will be asked a series of questions on the effects of balanced and unbalanced forces acting upon an object, the first questions is on a cyclist. This work can then be self-assessed using the mark scheme provided. The next questions are on the forces acting upon a car, this can be competed in their books and the work can be marked and corrected using the mark scheme provided. The last part of the lesson focuses on how forces can change the direction of an object, students are shown the example of the Moon orbiting the Earth due to the pull of gravitational force acting upon the Moon. The plenary task requires students to write down three facts, three key words and pose one question to test their peers knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a homeschool pack designed for the KS3 Year 7 Science course, specifically the ‘P1.1 Forces’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains four pages of information, to meet learning objectives within the Year 7 ‘Forces’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Introduction to Forces Squashing and Stretching Drag Forces & Friction Forces at a Distance Balanced and Unbalanced Forces Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.