This task is designed for the NEW AQA A-Level Biology, particularly the ‘Biological Molecules’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Biological Molecules’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Organisms and Their Environment’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Organisms and Their Environment’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Organisms and their Evironment’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Organisms and their Evironment’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Biological Molecules’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Biological Molecules’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson aimed at the new GCSE Physics specification, it meets specification points for the 'Energy' module. For more lessons within this series please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by students considering how energy is transferred to useful or wasted energy stores and the concept of energy dissipation is introduced. The first activity involves students filling in a worksheet to identify the useful and wasted energy transfers in different systems, this is then self-assessed using the answers on the PowerPoint. Pupils are then given the opportunity to describe the energy transfers of a pendulum, particularly thinking about why a pendulum eventually comes to a stop. Pupils can self-assess their work using the mark scheme on the PowerPoint. Pupils are then introduced to energy 'efficiency' and how they can use the wasted and useful energy values of a system to calculate the efficiency of this device. Pupils are firstly given some easier calculations to try which can be modelled on the board, answers are provided. Pupils can then complete the worksheet of calculations, which they can self-assess using the answers on the Power Point slide. For the last activity pupils are required to copy and complete a table, filling in missing values of either the efficiency, the wasted energy or useful energy values of different devices. Pupils can again self-assess using the answers provided. The plenary activity is a past-paper exit card, I get pupils to hand the completed worksheet to me as they leave and I will mark it and hand it back to them for the next lesson with a grade and improvements. Thanks for purchasing, please let me know if you have any feedback :). Worksheets are found at the end of the PowerPoint slide and all answers are provided so pupils can peer or self-assess their work throughout the lesson.

This is a resource aimed at the NEW GCSE Physics specification on ‘Energy’. Other lessons from this series can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by considering objects with elastic potential energy stores. The calculation for the elastic potential energy store of an object is introduced and pupils can have a go at rearranging it themselves. **If lower ability - you can go through this on the board** Pupils then copy and complete the table which leads them through the different stages to this calculation, they can then self-assess their work using a red pen. The next two slides are questions pupils can complete to work out the elastic potential energy stores of various objects, these questions can be self-assessed. The final activity is a past-paper question task (worksheet provided at the end of the PowerPoint) whereby pupils complete the questions, pass to their peers and peers will mark the work using the mark scheme provided on the PowerPoint. Peers should provide a positive comment, negative comment and something to improve. All resources for this lesson are included at the end of the PowerPoint presentation. Thanks & enjoy :)

This is a lesson aimed at the new AQA Physics GCSE module on 'Energy'. For more lessons within this series please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by introducing the concept of 'work done', by using the example of a person pedalling a bike. The first task the pupils will need to complete is to produce a mind map on activities which require work to be done in order something to happen. Pupils are then shown the equation to calculate work done and they can work through a model question. You can work through this question with pupils on the board or ask them to try and complete it in their books, then self-assess the work. The main activity for this lesson is a practical activity, the method for this practical is included in the PowerPoint presentation. Pupils will drag a wooden block across the desk a measured distance, the wooden block will be dragged initially with no elastic bands around it and then with one elastic band and finally with two elastic bands. Pupils will measure the force applied to drag the block using a Newton meter and record their results in a table (table included at the end of the PowerPoint). Using the measured distance and the force applied pupils can then work out the work done to drag each type of wooden block. The plenary activity is for pupils to complete a couple more work done calculations. All resources are included in the PowerPoint presentation.

This is a resource for the new AQA GCSE Biology ‘Infection and Response’ module. The lesson begins with an introduction to the structure of fungi and protists and some of the diseases they can cause in plants and animals. Pupils can then stick a piece of information in their books which outlines the rose black spot fungal disease of plants and the protist disease of malaria in humans. Pupils should use this information to work their way through the levelled tasks on the board. You can then go through the answers to these questions and pupils can self-assess or peer-asses their work. The mid-lesson progress check is an activity where pupils match definitions to the correct key words, pupils can self-assess their work. In the next activity pupils can create a pamphlet/poster aimed at patients going abroad to a country where they could be at risk of contracting malaria. Pupils can work through the tasks for each of the parts of the ABCD approach in order to complete this poster. Pupils can then peer-assess their work. Plenary is a quick quiz pupils can complete at the back of their books. Other lessons from the ‘Infection and Response’ unit can be found in my TES shop. Thanks :)

This lesson is designed to meet specification points from the NEW AQA GCSE 'Energy' module. For more lessons within this series please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with pictures demonstrating the 5 energy stores, pupils will need to discuss and decide on what these energy stores might be using the pictures. Once pupils have identified the energy stores (these can be written down on the whiteboard) pupils will then need to complete sentences which describe each of the energy stores, sentence starters are provided. Pupils are then given a slide with pictures which demonstrate examples of energy transfers, pupils again will need to identify the different ways in which energy can be transferred using the pictures. The next part of the lesson will focus on energy transfer flow diagrams, pupils will need to describe the energy transfers taking place in different systems, including a torch, candle & TV. There is a worksheet at the end of the PowerPoint which pupils can use to complete these tasks. When finished, pupils can self-assess their work. Pupils will then answer some progress check questions in their books, I usually ask pupils to complete in silence to reflect on what they have learnt this lesson. Pupils will then self-assess their work. The final task is a past-paper question, pupils can complete on the sheet and peer-assess their work using the mark scheme provided.

This is a resource which meets specification points from the NEW AQA GCSE Physics 'Energy' SoW. Other lessons from this SoW can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by pupils considering which of the energy resources are renewable or non-renewable. Pupils will then use the posters, which can be placed around the room or on pupils desks, to complete a table which identifies how the energy resource generates electricity and the advantages and disadvantages of each energy resource. Pupils are then given a list of statements about all power stations which they need to cut and stick (or write) into two columns - advantages or disadvantages. **To challenge higher ability pupils this could be completed at the back of students books, so they cannot use information from the previous task**. Pupils can then peer-assess their work. The plenary activity is a past-paper question which involves analysing some data on the usage of different power stations between two time periods. The mark scheme is included, pupils can use this to either peer-assess or self-assess their answer. All resources are included. Please review, I would appreciate any feedback :). Thanks!

This lesson is aimed at the new GCSE specification, on the topic of ‘Energy’. More lessons from this series can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils begin by considering what types of objects have a store of kinetic energy and then they can ‘Think, Pair, Share’ - what factors might affect how much kinetic energy an object actually has? The lesson then moves on to show pupils the calculation to work out kinetic energy, you can work through two model questions with pupils on the board. Pupils are then given a table where the calculation is broken down into sections. They are given the mass and the speed of an object, they will need to calculate 0.5 x mass in one column and the speed squared in another - from this they can calculate the kinetic energy. Once complete pupils can assess their work using a red pen. The next part of the lesson introduces how to rearrange the equation and then an activity follows with slightly harder calculations on kinetic energy, where they may be required to use the rearranged equation. Self-assessment of work when complete. **Higher ability students should now have a go at the past-paper question from the NEW AQA GCSE specimen material, they can complete the question and mark their work using the mark scheme provided** The plenary is game of ‘equation bingo’ - the students write 6 equations/words/phrases into their books, you describe their meaning and if students have the correct equation/word/phrase they can cross them out of their book. The first person to cross all of them out correctly can shout bingo! All resources are included in the PowerPoint - enjoy :)

This a resource aimed at the new AQA GCSE Biology specification as part of the 'infection & response' unit. This lesson is part of a 12 lesson bundle for the NEW 'Infection & Response' Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap of what makes a good medicine. Pupils are then given a scenario where they have to read some information cards on different medicines and using the information they need to decide which medicine would be the best to treat a bacterial infection. The next PowerPoint slide will go through the difference between antibiotics and painkillers and hopefully students should have chosen the antibiotic as the drug to treat bacterial infections in the previous activity. Next is an introduction to Alexander Fleming, the scientist who first discovered penicillin. Pupils can watch a video on his work and answer questions on a worksheet. Pupils can then peer-assess their work. The next few slides focus on how the growth of bacteria are affected by antibiotics, pupils can then use some data on the growth of bacteria to answer some questions. For the plenary pupils need to choose the correct word to complete the sentences. Other lessons for the NEW AQA 'Infection & Response' unit can be found in my TES shop. Thanks :)

This is a resource designed to meet specification points for the NEW AQA GCSE Physics module on ‘Energy’. Other lessons of this series can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience It begins with a discussion on what power is a measurements of, there are hints that can be put on the board for lower ability students. You can then provide students with a definition of power which they can write down in their books. Pupils then consider the units of power, they can copy and complete sentences on the board which compare watts to joules/second and the difference between watts and kilowatts, joules and kilo joules. Next is the completion of a formula triangle in their books, higher ability students can figure out how to write this on their own but for lower ability students you may want to guide them through it. The concept of power is then put into context using Mo Farah/Usain Bolt as examples (videos provided). The next task is a table that students will need to copy off the board, it outlines different appliances and pupils will have to perform calculations to fill in the blanks. Pupils can self-assess their work using red pens, answers are provided on the PowerPoint slide. The final activity is a worksheet pupils can complete on power, again the answers to this worksheet is provided within the PowerPoint slide for pupils to self-assess the work. Plenary activity requires pupils to state three key facts from the lesson, 2 key words and pose a question to their peers on the topic of power. All resources are included in the PowerPoint slide. Thanks & enjoy :)