Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
New AQA P7.4 (New Physics GCSE spec 4.7 - exams 2018) - Induced potential, uses of generators (Triple only)
AQA P7 (New GCSE Spec – Unit 4.7 – Magnetism and electromagnetism)
Lesson: P7.4 – Induced potential, uses of generators (Triple only)
Specification points covered =
4.7.3.1 - Induced potential (Higher tier)
4.7.3.2 - Uses of the generator effect (HT only)
4.7.3.3 - Microphones (HT Only)
4.7.2.4 - Loudspeakers
A fully resourced lesson about Induced potential, uses of generators, to be used when teaching the new physics specification GCSE of AQA P7 (Paper 2, Topic 3).
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing. Retrieval practice from this unit as well as other physics questions are built in as a starter to the lesson.
AQA P5 (New GCSE Spec – Unit 4.5 – Forces and their interactions)
Lesson: P5.14 – Changes in momentum (Physics only)
Specification points covered =
4.5.7.3 - Changes in momentum (Physics only)
A fully resourced lesson covering changes in momentum and the equation used to calculate this, along with the safety features that use changes in momentum to reduce force . This is a physics only lesson that covers any higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P5 (Paper 2, Topic 1).
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
This is a revision power point to be used when revising the content of AQA Physics paper 1 - it covers the key areas of both the trilogy and physics only routes - these are clearly separated out and so makes it easy to find suitable content activities for your groups.
The power point includes:
Specification points to discuss
All required practical activities - specification points along with example methods and questions for each.
Triple only content
Recall questions for each topic of physics paper 1 (with answers) for retrieval practice.
Content slides covering the key areas of each topic to discuss with your groups.
Various differentiated revision activities for each topic (with answers) for students to complete as you progress through.
The power point is designed to be used in revision lessons and designed in a way that key areas of weakness for individual groups can be found and addressed easily.
QA Physics New GCSE Spec (Paper 2 Topic 2 - exams 2018) – Waves (4.6)
All lessons to cover the both the TRILOGY and TRIPLE lessons of topic 6 (paper 2, topic 2) – Waves (4.6), from the new spec (exams 2018). .
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.6.1.1 - Transverse and longitudinal waves (P6.1 lesson)
4.6.1.2 - Properties of waves (wave calculations) (P6.1 lesson)
4.6.1.2 - Properties of waves - required practical - make observations to identify the suitability of apparatus to measure the frequency, wavelength and speed of waves in a ripple tank and waves in a solid and take appropriate measurements. (P6.2 lesson)
4.6.1.3 - Reflection of waves (physics only) (P6.3 lesson)
Required practical 9: Investigate the reflection of light by different types of surface and the refraction of light by different substances. (physics only) (P6.3 lesson)
4.6.1.4 - Sound waves (physics only) (P6.4 lesson)
4.6.1.5 - Waves for detection and exploration (P6.4 lesson)
4.6.2.1 - Types of electromagnetic waves (P6.6 lesson)
4.6.2.2 - Properties of electromagnetic waves 1 (P6.7a lesson)
4.6.2.3 - Properties of electromagnetic waves 2(P6.7a lesson)
Required practical (P6.7b lesson) - investigate how the amount of infrared radiation absorbed or radiated by a surface depends on the nature of that surface.
4.6.2.4 - Uses and applications of electromagnetic waves (P6.8 lesson)
4.6.2.5 - Lenses (P6.9 lesson)
4.6.2.6 - Visible Light (physics only) (P6.10 lesson)
4.6.3.1 - Emission and absorption of infrared radiation (P6.11 lesson)
4.6.3.2 - Perfect black bodies and radiation (P6.11 lesson)
To buy all of these lessons separately from my shop would cost £30.
AQA C2.4 - Covalent bonding. A full lesson about Covalent bonding to be used when teaching the AQA additional science unit. Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C2.1 - Chemical bonding. A full lesson about chemical bonding to be used when teaching the AQA additional science unit. Fully resourced with differentiated tasks and activities shown on power point slides.
OCR 21st century science C5 lessons. All lessons to cover OCR C5 unit of work. Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.
AQA C1.4 (new spec) - Structure of the atom. A fully resourced lesson about atoms, elements and compounds to be used when teaching the New specification of AQA C1.
Fully resourced with differentiated tasks and activities shown on power point slides
AQA C1.7 (new spec) - Group 1 - The alkali metals. A fully resourced lesson group 1 - the alkali metals to be used when teaching the New specification of AQA C1.
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New Specification! Chemical analysis (Paper 2, topic 3) (4.8) (TRILOGY ONLY LESSONS)
All lessons to cover paper 2, topic 3 (4.8) from the new spec (exams 2018). Lessons to cover only the 'trilogy' science route.
(Lessons to cover both trilogy and chemistry separate science lessons available in shop!)
The lessons include the required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow to give extended feedback on their work in these tasks.
Specification points covered (lesson by lesson):
4.8.1.1 (TRILOGY) - Pure substances
4.8.1.3 (TRILOGY) - Chromatography
4.8.2 (TRILOGY) - Identification of gases (oxygen, carbon dioxide, hydrogen, chlorine)
AQA C3 (New Spec – Unit 4.3 – Quantitative chemistry)
Lesson: C3.7 (Triple Only) - Concentration in mol/dm3
Specification points covered = 4.3.4 Using concentrations of solutions in mol/dm3 (Higher tier)
A fully resourced lesson about Using concentrations of solutions in mol/dm3 to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C3 (New Spec – Unit 4.3 – Quantitative chemistry)
Lesson: C3.9 - Atom economy (Triple Only)
Specification points covered = 4.3.3.2 Atom economy (Triple)
A fully resourced lesson about atom economy to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3).
Fully resourced with differentiated tasks and activities shown on power point slides.
Lesson power point to cover Edexcel P3.5 - Different lenses.
Specification - examined from 2014
Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.
Lesson power point to cover Edexcel P3.3 - Sight Problems
Specification - examined from 2014
Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.
Lesson power point to cover Edexcel P3.24 - Kinetic Theory
Specification - examined from 2014
Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.
Lesson power point to cover Edexcel P3.27 - Calculating volumes and pressure of gases
Specification - examined from 2014
Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.
AQA Chemistry New Spec (Paper 2 Topic 2- exams 2018) – Organic Chemistry (4.7) AQA Chemistry New Specification!
All lessons to cover the triple part of topic 7 (paper 2, topic 2) – Organic Chemistry, from the new spec (exams 2018). Lessons cover the Triple chemistry science route chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Chemistry Triple science specification points and lessons:
4.7.2.1 – Structure and formulae of alkenes (C7.4 lesson)
4.7.2.2 – Reactions of alkenes (C7.4 lesson)
4.7.2.3 – Alcohols (C7.5 lesson)
4.7.2.4 – Carboxylic acids (C7.6 lesson)
4.7.2.4 – Reaction of carboxylic acid and alcohols (esters) (C7.7 lesson)
4.7.3.1 – Addition polymerisation (C7.8 lesson)
4.7.3.2 – Condensation polymerisation (HT) (C7.9 lesson)
4.7.3.3 – Amino acids (HT) (C7.10 lesson)
4.7.3.4 - DNA and other naturally occurring polymers (HT) (C7.11 lesson)
AQA C7 (New Spec – Unit 4.7 – Organic chemistry)
Lesson: C7.6 - Carboxylic acids (Triple only)
Specification points covered = 4.7.2.4 – Carboxylic acids
A fully resourced lesson about carboxylic acids to be used when teaching the New specification of AQA C7 (Paper 2, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New Spec (Paper 1 Topic 5- exams 2018) – Energy Changes (4.5)
AQA Chemistry New Specification!
All lessons to cover the triple lessons topic 5 (paper 1, topic 5) – Energy Changes, from the new spec (exams 2018). Lessons cover both the the 'triple' separate chemistry specification points only.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Chemistry Triple science specification points and lessons:
4.5.2.1 – cells and batteries (C5.3 lesson)
4.5.2.2 - Fuel Cells (C5.4 lesson)
