Eduqas/Wjec Engineering - Unit 3 Revision tasks - 3rd Angle/Orthographic and area/volume questions
1 x 3rd Angle/Orthographic and area/volume questions answers
1 x 3rd Angle and Orthographic drawing booklet
2 x Guided reading tasks
Engineering - Eduqas/Wjec Lvl 1/2 - Unit 3 - Solving Engineering problems
Teaching from September 2022
This unit will be ran in the single lesson allocated to this subject in year 10 and 11. I plan to run the exam at the end of Year 11 for my classes. This is linked with how I intend to run this course when using the SOL I have added to the site. See SOL for further details. All tasks are linked to the specification. This is work in progress and some tasks may be incomplete but like I said this is work in progress for a new specification and will provide the basis of a good foundation to work from.
SEE PART 2 OF THESE RESOURCES TO COMPLETE THIS UNIT
I have also added Unit 2 - Designing engineering products resources
Weeks 1 to 4 - 3.3.1 Describing engineering processes
Weeks 5 to 8 - 3.3.2 Describing applications of engineering processes
Weeks 9 to 12 - 3.3.3 Safe working practices
Weeks 13 to 16 - 3.1.1 Describing engineering developments
Weeks - 17 to 20 - 3.1.2 Explaining the effects of engineering achievements
Weeks 21 to 24 - 3.1.3 Explaining how environmental issues affect engineering applications
Weeks 25 to 28 - 3.2.1 Understanding materials, their properties, and their selection for specific purposes
Please check back for updates to this uplaod as i will develop more resources and adapt and improve the ones already done.
Such as 3.2.1 Understanding materials, their properties (updated)
Engineering - Eduqas/Wjec Lvl 1/2 - Unit 3 - Solving Engineering problems
Teaching from September 2022
This unit will be ran in the single lesson allocated to this subject in year 10 and 11. I plan to run the exam at the end of Year 11 for my classes. This is linked with how I intend to run this course when using the SOL I have added to the site. See SOL for further details. All tasks are linked to the specification. This is work in progress and some tasks may be incomplete but like I said this is work in progress for a new specification and will provide the basis of a good foundation to work from.
3.2.2 Describe properties required of materials for engineering products
3.2.3 Explaining how materials are tested for properties
3.4.1 Using mathematical techniques for solving engineering problems
3.4.2 Understanding and producing engineering drawings
Resources to help deliver and guidance for teachers which includes templates.
The resources also include power points that will help learners learn how to draw and convert third angle projection. I have added numerous tasks for learners to follow. I have added slides that show and demonstrate the tasks and how shapes are draw in both orthographic and 3rd angle drawings. I will add google sketch up drawings to show how to make a product in google sketch and then move the design to be able to screen shot it to show third angle drawing.
Following tasks and power point for learners to complete:
Orthographic and 3rd angle projection task
Life cycle assessment task
Renewable energy
I will be adding other resources for this unit so keep checking back
Year 9 phone holder projects - Weeks 1 to 11
JIG only project. Lower ability project
I have uploaded a project that makes the same product but uses finger and lap joints to manufacture the gum ball dispenser. Higher skilled product.
Each week has a question that will be discussed in the practical lesson. Each question relates to a big question that is - What impact does the manufacturing have on your carbon footprint? - Each week a homework has been added. A tracking sheet that will be used to assess the learners at the end of the carousel. PLC has been added to the resources where each learner will use them to check their own progress and skills learnt.
Each skill that is taught has been photographed and is in the powerpoint.
Engineering drawings are added to the slides to teach learners the basics of reading engineering drawings.
A workbooklet has been added that I used during lockdown.
UPDATED Resources to help deliver and guidance for teachers which includes templates and examples of work that has been graded.
I will be adding other resources at a later date that will resources that will include power points that have tutorials of how to use CAD software (google sketch up) and 2D Design when completing engineering drawings for learners to be able to produce their own work independently from the rest of the class.
A teaching PP and Learner PP is supplied for unit 2. I will adapt and change the resources as I teach and will add other resources that I have used. Please check back for any added resources such as google sketch tutorials and 2D design tutorials.
Teaching from September 2022
SOL for year 10 Eduqas/Wjec Engineering Lvl 1/2
This is how I’m running it from September but no way is it set in stone. This is my first draft but the foundations are there.
We have 1 double lesson and 1 single lesson each week for year 10’s and 11’s. The double lesson I intend to run with the practical elements for unit 1 this is based on skills that will/should be used when the exam board release the skills needed in June/July.
I am running with exam theory in the single lesson.
All resources will be linked to the specification and titled in that way. See my downloads for these resources.
I have added a road map for year 10 and 11 road map for Design and Technology. It shows specific points where and when each aspect of the course should be completed.
Eduqas/Wjec SOL - Year 10 SOL for units 1 - Engineering design & Unit 3 Solving Engineering problems.
Indepth break down of week by week and how each AC and LO will be covered.
Edexcel speaad sheet
Design and Technology SOL years 7, 8 and 9
All 3 SOL are completed on an excl sheet. Each year group is linked with my KS3 resources that are already uploaded onto the site and can be accessed through my shop.
Resources to help deliver and guidance for teachers which includes templates and examples of work that has been graded.
A teaching PP and Learner PP is supplied for units 1
I have added the template for the 2D Design. Each part of the low-cost phone rig has been drawn on a seperate 2D Design file. These can be adapted for learners. Message for and I can email them.
Introduction to isometric drawing lesson. Lesson is fully planned with teaching powerpoint and a student on isometric paper. I used this for an interview lesson and feedback was that was a excellent way of teaching properties of materials and a unique twist that students can relate too.
Year 7 phone holder projects - Weeks 1 to 11 - Each week has a question that will be discussed in the practical lesson. Each question relates to a big question that is - What impact does the manufacturing have on your carbon footprint? - Each week a homework has been added. A tracking sheet that will be used to assess the learners at the end of the carousel. PLC has been added to the resources where each learner will use them to check their own progress and skills learnt.
Each skill that is taught has been photographed and is in the powerpoint.
Engineering drawings are added to the slides to teach learners the basics of reading engineering drawings.
A workbooklet has been added that I used during lockdown.
Year 9 phone holder projects - Weeks 1 to 11
I have uploaded a project that makes the same product but uses jigs to manufacture the gum ball dispenser.
Each week has a question that will be discussed in the practical lesson. Each question relates to a big question that is - What impact does the manufacturing have on your carbon footprint? - Each week a homework has been added. A tracking sheet that will be used to assess the learners at the end of the carousel. PLC has been added to the resources where each learner will use them to check their own progress and skills learnt.
Each skill that is taught has been photographed and is in the powerpoint.
Engineering drawings are added to the slides to teach learners the basics of reading engineering drawings.
A workbooklet has been added that I used during lockdown.
Unit 1 - Manufacturing engineering products
Learner template coursework online booklet
Teaching Unit 1 theory power point
teaching Unit 1 Practical power point
Drawing of the specialist craft/hobby vice (Supplied by Wjec) practical work and the coursework that is linked with it that the learners need to complete.
See other resources linked with this qualification.
SOL
Unit 2 - Teaching and learner power points
Unit 3 - Exam Theory - Teaching and learner power points
Updates will be added when teaching and resources are updated and improved.
Year 8 mood light projects - Weeks 1 to 11 - Each week has a question that will be discussed in the practical lesson. Each question relates to a big question that is - What impact does the manufacturing have on your carbon footprint? - Each week a homework has been added. A tracking sheet that will be used to assess the learners at the end of the carousel. PLC has been added to the resources where each learner will use them to check their own progress and skills learnt.
Each skill that is taught has been photographed and is in the powerpoint.
Engineering drawings are added to the slides to teach learners the basics of reading engineering drawings.
A workbooklet has been added that I used during lockdown.