Power point: The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included. A lesson plan is also included (MS Publisher file). Learning Outcomes: In this lesson, students will gain an understanding of: • Of what are different types of three dimensional projection and drawing? • Of how to draw isometric projection drawings, with 3 challenges including: basics shapes, more complex shapes, to a super challenge that is very hard! • Of how to use a good quality of line drawing shapes in Isometric projection • Of how to add three tone shading to make their 3-D drawings more realistic • Literacy: Students will also learn a range of subject specific key words • How to translate 3rd Angle orthographic to Isometric • Literacy: Students will also learn a range of subject specific key words Worksheets: The worksheets are differentiated into two categories: • ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc. • The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.

This is an artist worksheet, that includes analysis questions about Van Gogh’s Self-portrait with straw hat – 1887/88. This is suitable for lesson, cover, home work or baseline assessment. On this all in one sheet, there are boxes for students to: copy and complete a Van Gogh image write their answers in, discussing the style of the artist Self/teacher assessment with WWW and EBI success criteria provided. If you found this resource helpful, please leave positive comments, as this really helps. Thank you.

This is a really inspiring, interactive, fascinating, fun and creative lesson for students of all ages, touching on the following aspects of this most amazing painter Johannes Vermeer Including: A Power point and print resource that can be stretched over 2 - 3 hours/lessons, with 2 excellent activities for experienced and new teachers and an excellent cover resource! • A to do starter activity • An excellent artist factsheet and picture to copy for students to complete, with exemplars included • Thoroughly researched and detailed history of the painter • Comparison of his style to other Dutch artist, considering his contribution to art history • A strong theme of literacy and art history throughout • Links to other relevant artists, style and movements • Art theory and technology that artists have used to replicate photorealistic imagery explained. • A 2nd starter activity with literacy and key words: ‘Chiaroscuro’ • An amazing step by step animation of how to copy ‘The girl with the pearl earring’ by Vermeer in colouring pencils, using Grid and ‘Grisaille’ technique • AFL: students use WWW and EBI throughout to self-assess on 1st activity - success criteria provided • Home learning activity for students I really hope you and your students enjoy this lesson as much as I enjoyed putting it together. I really love Vermeer and I hope you will too! Please leave a positive comment if you liked this resource! Keep your eyes peeled - I will be posting more artist lessons and a final piece project based on this series!

Printed as an ‘all in one’ worksheet, this will help students with teh concept of circles in perspective. These are ideal for lessons, cover work, home work or starter activities Including: • step by step activities on how to ‘translate’ circles to isometric ellipses • How to draw ellipses in isometric If you found this resource helpful, please leave positive comments, as this really helps. Thank you.

3-D Printer Prototype Project The rationale: As D&T teachers return to school, we need a basic tool/CAD CAM based project to achieve the balance of remaining safe, but also providing an exciting practical project for students. This project is tried and tested and the kids love it. This is designed to simulate an NEA project, where students will research, design, model, prototype and evaluate a 3D printed object for a specific target market. This 7 x 1 hour lesson mini project is an ‘all in one’ prepared resource, containing lesson by lesson PowerPoints, accompanying worksheets, Youtube videos, home learning and examples that model success criteria. This resource that can be used by subject specialists and non D&T teachers alike, perfect for cover work as well. PowerPoints: The project is driven by high end, attractive and informative power points, which have detailed instructions and notes, step-by-step animations, with starter(‘To do’), main and plenary activities, as well as home learning included. Learning Outcomes: This design and make project is aimed at Year 9 and Year 10 students, who will gain an understanding of how to: • Lesson 1: Scales of production and commercial processes • Lesson 2: Primary and secondary research methods • Lesson 3: How to draw and annotate scrap views, sectional views and rendering in 3-D. • Lesson 4: How to make mock up models in Styrofoam using workshop tools • Lesson 5: How to use a user friendly CAD modelling program • Lesson 6: How to use a 3-D printer to create a toothbrush prototype and evaluate project Project plan: A scheme of work is also included as a MS Publisher file. This explains the: learning outcomes, starter, main and plenary activities as well as resources required and homework. Work sheets: These are mainly PPT files, but the final evaluation is MS Publisher, which is differentiated in the form of sentence starters. Please leave a positive review if you found these resources helpful, Thank You!

This is designed to simulate an NEA project, where students will research, design, model, and prototype and evaluate a 3D printed object for a specific target market. This lesson focusses on Styrofoam modelling, creating a more ergonomic handle for a tactile object. The students really enjoyed this lesson and also it is relatively easy to conduct especially under current circumstances. PowerPoints: This lesson is driven by a high end, attractive and informative power point, which has detailed instructions and notes, step-by-step animations, with starter(‘To do’), main and plenary activities, as well as home learning included. Learning Outcomes: Students will gain an understanding of how to: Students will gain an understanding of the difference between Mock ups & Prototypes and what they are: Used for & Made of Practical: Watch the animation, follow school health and safety guidance, measure, mark out and make mock up models! Students consider ergonomics by testing and applying quality control to the mock up model throughout practical, to consider how a client with arthritis can hold their toothbrush more comfortably Links to NEA Lesson plan: A Lesson plan is also included as a MS Publisher file. This explains the: learning outcomes, starter, main and plenary activities as well as resources required and homework. Work sheets: These are mainly PPT files, but the final evaluation is MS Publisher, which is differentiated in the form of sentence starters. Please leave a positive review if you found these resources helpful, Thank You!

In these 4x artist worksheets, students can work independently, researching the artist and then copying the image to better understand the style of the artist. These are ideal to accompany art theory lessons, cover lessons, home learning or even baseline assessment. These are particularly helpful for teaching students about: • A tonal range and natural forms (Ernst Heckel and Karl Blossfelt) • Expressionism and expressive art (Kathe Kollwitz) • 1 point perspective in a Neo-classical style (Georgio De Chirico) On this all in one sheet, there are boxes for students to: • Copy and complete an artist image • Write their answers in, discussing the style and life of the artist • Self/teacher assessment with WWW (What went well) and Improvement comment, with success criteria provided. If you found this resource helpful, please leave positive comments, as this really helps. Thank you.

The learning concept: The concept is that the acronym SCAMPER is used by each consecutive student to alter the last students’ design. I normally allow each student ten minutes per alteration. The students really enjoy this activity and it can be stretched to a 1 hour duration Learning Outcomes: In this lesson, students will gain an understanding of: Different design movements Free hand sketching as they can use other’s designs as a springboard for inspiration Gain confidence in annotating each other’s designs This will culminate in them drawing more complex combinations of these designs, which can then be judged by the student or peer assessed to describe the favourite design. Students will also learn subject specific key words that will underpin their design and technology vocabulary. Power point: The attractive and visual power point can be used on the white board and also printed as a worksheet. Printed as two worksheets, there is a blank and also a differentiated version where one idea is already started so that students do not struggle with ‘blank page syndrome’. This has first example models success criteria in the form of detailed annotation and a strong product design influenced by the example swatches on the left side of the page.

Power point: The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included. A lesson plan is also included (MS Publisher file). Learning Outcomes: In this lesson, students will gain an understanding of: • STEM: Cross-curricular to Mathematics • How 3rd angle orthographic ‘translates’ into isometric projection? • Of how valuable this type of drawing and projection is in design and designers • What Notation of dimensions is in Engineering drawing, including leader line, extension lines, dimension figures, arrowheads, etc? • Three activities of how to ‘translation’ of orthographic and isometric projection can be used for architecture, illustrative typography and also for ‘reverse translation’ in the Super challenge task. • How to draw ellipses in isometric • Literacy: Students will also learn a range of subject specific key words Worksheets: The worksheets are differentiated into two categories: • ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc. • The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.

Power point: The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included. A lesson plan is also included (MS Publisher file). Learning Outcomes: In ONE point perspective lesson (1b), students will gain an understanding of: • Famous artists in history, such as Leonardo De Vinci and Hans Vermeer who used one point perspective drawing techniques • What is one point perspective drawing? • How to create realistic perspective drawings, with 3 challenges including: basic cubes, varied shapes, to complex city street views • Literacy: Students will also learn a range of subject specific key words I have added in an additional “Quality of line 1b” power point that could be used to build confidence for lower ability students. From this students will learn: • Gain confidence in drawing freehand squares, rectangles and circles using guidelines, proportional measurement and outline. Worksheets: The worksheets are differentiated into two categories: • ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc. • The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.

This is an artist worksheet, that includes analysis questions about Van Gogh’s Bedroom in Arles - 1888. This is suitable for lesson, cover, home work or baseline assessment. On this all in one sheet, there are boxes for students to: copy and complete a Van Gogh image write their answers in, discussing the style and life of the artist Self/teacher assessment with WWW and EBI success criteria provided. If you found this resource helpful, please leave positive comments, as this really helps. Thank you.

A handy resource that you can use to help your students draw several isometric shapes. Isometric paper not included.

A LEVEL PRODUCT DESIGN NEA SECTION D 2021 This is the perfect resource for remote learning to get students enthused, confident and carrying on, with a high quality power point, with highly detailed guidance, examples and specialist technical knowledge, with relevant visuals and animations, techniques and directed tasks to get them finishing off Section D! This is an extremely comprehensive resource that covers this entire unit. Learning outcomes: In this A level coursework task, Students will gain an understanding of: How the mark scheme translates into 3 chunked research tasks: How to explain how their intended prototype would be fully address the design brief, satisfying all major points of the specification also meeting the needs/requirements of their client The specialist technical subject knowledge of section with strong emphasis on researching the correct tools, materials and equipment, as well as health and safety, quality control and relevance to their intended prototype manufacture Students will learn how to represent this intended manufacture process as a detailed manufacturing diary, considering health and safety as well as quality control. I have gone into an incredible level of detail on the manufacture processes, including: Wasting processes, Sawing & jointing, Drilling, Turning , Polymer forming processes: Vacuum forming, Line bending , CAD CAM processes: Laser cutting, 3d printing, Metal processes: Casting, MIG welding, Soldering, Standard components and fixings, Knock down fittings, Fixings, Tensol glue, Epoxy resin, PVA glue, Finishes, Adding veneer, Painting with acrylic/stain/watercolour, and finally Varnishing. I also mention injection moulding and industrial processes. This aspect of the power point alone makes this an invaluable resource for exam revision as it covers all the core specialist Technical knowledge aspects in the A level course. Potential learning outcomes: Next 4 - 5 slides/pages of NEA / Length – 3 - 5 lessons (including student activity) This is one of my TES units dealing with the 2021 A level NEA. Please look to the resources here for other sections (A and A1): https://www.tes.com/resources/search/?authorId=25805054&q=A level NEA product design&shop=surfacedetail1 Also I have extensive NEA resources for the GCSE NEA, here: https://www.tes.com/resources/search/?authorId=25805054&q=GCSE NEA&shop=surfacedetail1 I hope these help you and your students succeed! Please add a positive review/some stars if you found this useful as this really helps; THANK YOU!

2021 AQA DT GCSE NEA Guide to Section E This is the perfect resource for remote learning to get students enthused, confident and carrying on, with a high quality power point, with highly detailed guidance, examples, with relevant visuals and animations, techniques and directed tasks to get them finishing off Section F! This is an extremely comprehensive resource that covers this entire section. Learning outcomes: In this GCSE coursework task, Students will gain an understanding of: How the mark scheme translates into chunked analysis and evaluation tasks Analysis and self- evaluation, client opinion and third party opinion that has occurred throughout the portfolio How to create an index of this How to evaluate the success of their final design against their original specification (section B) How to write an evaluative summary of what they found out, based on questions for every section of an NEA, including research methods, Design Process, Mock ups/prototype stage, Manufacture process, CAD/CAM process, including testing and conclusion How to structure their response in complex sentences, using P.E.E., supported by using differentiated materials in the form of sentence stems with clear success criteria. Potential learning outcomes: Next 3+ slides/pages of NEA / Length – 3 lessons (including student activity) This is one of my 6 part TES units dealing with the 2021 GCSE NEA. Please look to the resources here for section A (first two), section B and a combination section C/D unit/power point as well as section E (which reflects the most recent changes to the marks scheme): https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-e-12494870 https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-c-and-d-12477833 https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-a-12395717 https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-section-a-part-2-12401619 https://www.tes.com/teaching-resource/2021-aqa-dt-gcse-nea-guide-to-section-b-12417046 I hope these help you and your students succeed! Please add a positive review/some stars if you found this useful as this really helps; THANK YOU!

This lesson focusses on drafting skills, including material rendering in 6 different textures, scrap views, cross sections and principles of legible and neat annotation. The source materials focus on a toothbrush, however this could relate to any product. PowerPoint: This lesson is driven by a high end, attractive and informative power point, which has detailed instructions and notes, step-by-step animations, with starter(‘To do’), main and plenary activities, as well as home learning included. The students really enjoyed this lesson and also it is relatively easy to conduct especially under the current circumstances. Learning Outcomes: Students will gain an understanding of how to do: Scrap views Sectional views Rendered drawings How to render 6 different textures The importance of clear and easy read annotation Links to NEA Lesson plan: A Lesson plan is also included as a MS Publisher file. This explains the: learning outcomes, starter, main and plenary activities as well as resources required and homework. Work sheets: These are mainly PPT files, but the final evaluation is MS Publisher, which is differentiated in the form of sentence starters. Please leave a positive review if you found these resources helpful, Thank You!

Vincent Van Gogh theory and Practice This is a really inspiring, interactive, fascinating, fun and creative lesson for students of all ages, touching on the following aspects of this most amazing painter Vincent Van Gogh Including: A Power point and print resource that can be stretched over 2 - 3 hours/lessons, excellent for experienced and new teachers and an excellent cover resource! • A to do activity • A literacy starter activity with lots of key words • An excellent artist fact sheet and picture to copy for students to complete, with exemplars included • Thoroughly researched and detailed history of the painter • Letters from the artist, explaining significance of his contribution to art history • A strong theme of literacy and art history throughout • Links to other relevant artists, style and movements • Colour theory and symbolism • An amazing step by step animation of how to copy Starry Night by Vincent in Oil pastel • Lots of quotes from Van Gogh throughout • AFL: students use WWW and EBI throughout to self-assess on the two main activities - success criteria provided • A choice of home learning activities for students, including challenge and super challenge • Teacher notes on activities and resources at end of PPT I really hope you and your students enjoy this lesson as much as I enjoyed putting it together. I really love Van Gogh and I hope you will too! Please leave a positive comment if you liked this resource! Keep your eyes peeled - I will be posting more artist lessons and a final piece project based on this series!

These 3 sheets will help produce inspiring, interactive, fun and creative lesson outcomes for students of all ages, touching on the following aspects of this most amazing painter Johannes Vermeer. These are suitable for lessons, cover work, home work or baseline assessment. Including: Vermeer artist factsheet 1 This is an artist worksheet that includes analysis questions about Vermeer’s Lady Maidservant Holding Letter - 1666. On this all in one sheet, there are boxes for students to: • Copy and complete a Vermeer image • Write their answers in, discussing the style and life of the artist and analysis of the paintings events. • Self/teacher assessment with WWW (What went well) and EBI (Even better if…) success criteria provided. Vermeer gridded resource sheet & artist worksheet 2 • An attractive resource sheet, which includes a gridded copy of ‘The girl with the pearl earring’ by Vermeer that can be copied in any medium, using Grid technique on the student worksheet provided. The scale is 1:1 for ease of student’s use. If you found this resource helpful, please leave positive comments, as this really helps. Thank you.

Quality of line: Squares & circles Power point: The attractive, visual and informative power point has detailed instructions, step-by-step animations, with starter, main and plenary activities, as well as home learning included. A basic lesson plan is also included (publisher file). Learning Outcomes: In this lesson, students will gain an understanding of: • Free hand sketching • Gain confidence in drawing freehand squares, rectangles and circles using guidelines, proportional measurement and outline. • This will culminate in them drawing more complex combinations of these shapes. • Students will also learn a wide range of subject specific key words that will underpin their design and technology vocabulary. Worksheets: The worksheets are differentiated into two categories, with the ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc. The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.

Power point: The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included. A lesson plan is also included (MS Publisher file). Learning Outcomes: In this lesson, students will gain an understanding of: • What is the difference between shape and form? • What primary and secondary colours are • What complementary and harmonising colours are • To gain confidence in drawing and rendering, using light source, three tone shading and isometric projection. This knowledge will culminate in them completing a final drawing. • Literacy: Students will also learn a range of subject specific key words Worksheets: The worksheets are differentiated into two categories: • ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc. • The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.

Power point: The high end, attractive and informative power point has detailed instructions and notes, step-by-step animations, with starter, main and plenary activities, as well as home learning included. A lesson plan is also included (MS Publisher file). Learning Outcomes: In this lesson, students will gain an understanding of: • Of what are different types of three dimensional projection and drawing? • Of how to draw isometric projection drawings, with 3 challenges including: basics shapes, more complex shapes, to a super challenge that is very hard! • Of how to use a good quality of line drawing shapes in Isometric projection • Of how to add three tone shading to make their 3-D drawings more realistic • Literacy: Students will also learn a range of subject specific key words Worksheets: The worksheets are differentiated into two categories: • ‘LA’ worksheets having additional support in terms of the outcomes as well as sentence stems, word banks, etc. • The second category of worksheet has differentiation in the form of more open ended tasks as well as ‘Super Challenges’.