This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic P3 (Particle model of matter) of the AQA Trilogy GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Density of materials Changes of state Temperature changes in a system and specific heat capacity Changes of heat and specific latent heat Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quiz tasks and quiz competitions to enable students to assess their understanding of the content within topic 3 (Properties of waves, including light and sound) of the Cambridge IGCSE Physics (0625) specification. The lesson covers the content in both the core and supplement sections of the specification and therefore can be used with students who will be taking the extended papers as well as the core papers. The specification points that are covered in this revision lesson include: Give the meaning of the terms speed, frequency, wavelength and amplitude Distinguish between longitudinal and transverse waves and be able to give suitable examples of each Recall and use the equation velocity = frequency x wavelength Describe how waves can undergo reflection, refraction and diffraction Describe how wavelength affects diffraction Describe an experimental demonstration of the refraction of light Be able to define refractive index and recall the equation to calculate Give the meaning of the critical angle and recall the equation to calculate Describe total internal reflection and be able to explain the use of optical fibres in medicine The electromagnetic spectrum Describe the longitudinal nature of sound waves State the approximate range of audible frequencies for a healthy human Show an understanding of the term ultrasound Describe an experiment to determine the speed of sound in air The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Should you WAVE goodbye” where they have to decide if a passage is 100% factually correct or not whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams.

This is a concise REVISION lesson that contains an engaging powerpoint (34 slides) and associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic P7 (Magnetism and electromagnetism) of the AQA Trilogy 9-1 GCSE Combined Science specification. Generally, this is a topic which isn’t particularly well understood by students but is regularly assessed through questions in the GCSE exams and so time has been taken to design the lesson so that the key points are covered and common misconceptions addressed. The following sub-topics in the specification are covered in this lesson: Poles of a magnet Magnetic fields Electromagnetism Fleming’s left hand rule Electric motors This lesson can be used throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams

An engaging and informative lesson presentation (49 slides) looks at the differences between contact and non-contact forces and focuses on enabling students to describe and recognise them. This lesson has been written for GCSE students but could be used in higher ability KS3 lessons with students who are looking to progress their knowledge. The lesson begins by introducing the fact that forces can be grouped into these two categories and initial definitions are used to ease the students into the lesson. To follow on from this a competition called “FORCE it together” is used. This engaging game challenges the students to spot the name of a force which is in anagram form and then once it has been identified, they have to determine whether it would be a contact or non-contact force. As each force is met, key details are given and discussed. More time is given to areas which can cause problems for students, such as the use of weight and gravity force and whether they are actually different. Moving forwards, a rugby tackle is used to show the numerous forces that interact in everyday situations, before students are challenged to identify more forces in sports of their choice. Students will recall/learn that force is a vector quantity and therefore is represented in diagrams using arrows. Once again, this lesson focuses on showing them how these arrows can be used differently with the different types of forces. Students are briefly introduced to the idea of a free body diagram and an understanding check is used to see whether they can identify friction, gravity force and normal contact force from the arrows. Progress checks like this are written into the lesson at regular intervals, in a range of formats, so that students are constantly assessing their understanding. The final part of the lesson is one more quick competition where students have to use their knowledge of the forces to form words.

This is a fully-resourced lesson that guides students through the range of calculations involved in calculating speeds in everyday situations. This lesson includes an informative lesson presentation (27 slides) and a question worksheet which has been differentiated two ways. The lesson begins by showing the students a speed camera and challenging them to recall the equation that would be used to calculate the speed as well as asking them to explain where the distance and the time values would come from. This lesson has a high mathematical element to it, to run in line with the questions that were seen in the latest exams this summer. Students will be expected to convert between units and rearrange formula. In this example, students are challenged to convert between m/s and mph in order to determine which of three drivers will receive a speeding ticket for exceeding the limit. This task has been differentiated so that students who find the conversions difficult are given some assistance so they can still access the learning. Moving forwards, students will see how a sensor on a tyre of a bicycle can also be used to calculate the speed by working out the circumference of the tyre to determine the distance. The final part of the lesson gets students to convert between m/s and mph and the other way to find out some typical speeds of everyday motion such as walking, running or a train moving. This lesson has been written for GCSE aged students but could be used with younger students of high ability who need an extra challenge in the calculating speed topic.

This is a fully-resourced lesson that looks at how pressure can be calculated using force and area and then explores how hydraulics are used to transmit a force through a fluid and challenges the students to apply the given equation to calculate the force or area. The lesson includes a lesson presentation (18 slides) and a question worksheet which has been differentiated two ways. The lesson begins by challenging the students to use an answer to a calculation question to work out the equation that links pressure, force and area. A range of mathematical skills are tested throughout the lesson, such as converting between units and rearranging formula, and then the answers are fully explained so any student who was unable to move through the question can visualise the method. Moving forwards, students will be introduced to a hydraulics system and the equation which they will be given on the sheet in the exam. Students will use the equation to calculate the force or area at the second point of the system. This task has been differentiated so that students who find it difficult are still able to access the learning. This lesson has been written for GCSE aged students

This fully-resourced revision lesson challenges the students on their knowledge of the content detailed in topic 3 (Particle model of matter) of the AQA GCSE Physics specification. The wide range of activities which include exam questions with clear explanations will allow them to assess their understanding of the content and to recognise those areas which require further attention. The lesson has been designed to cover as much of the topic as possible but the following specification points have been given particular attention: Recall and apply the equation to calculate density Explaining differences in density between states of matter Internal energy and the result of heating the particles in a system Applying the equation to calculate the specific heat capacity Understanding that temperature does not change during changes of state Applying the equation to calculate the specific latent heat Explaining the qualitative relationship between the temperature of a gas and its pressure Applying the equation that links pressure, volume and a constant The engaging PowerPoint guides students on the use of key mathematical skills to aid success with the various calculations

This is a fully-resourced revision lesson that has been written to include a wide range of activities that challenge the students on their knowledge of astrophysics as detailed in topic 8 of the Pearson Edexcel IGCSE Physics specification. The numerous quiz rounds which include “Shine a LIGHT on any ERRORS” will engage and motivate their students whilst they assess their understanding of the content and recognise any areas that require further attention. The lesson has been designed to include as many of the specification points as possible but the following have been given particular attention: Understanding of the terms Solar system, galaxy and universe Gravitational field strength varies on different planets Gravitational force causes the Moon to orbit the Earth and the planets to orbit the Sun Use the relationship between orbital speed, orbital radius and time period Evolution of stars of a similar mass to our Sun and of stars with larger masses The evidence that supports the Big Bang theory The change in the frequency and wavelength of a wave if the source of the wave is moving in relation to the observer Red-shift as evidence of an expanding universe This topic contains a number of principles or theories which can be poorly understood by students so extra time has been taken to guide them in the formation of descriptions and explanations.

This revision lesson has been filled with activities that will challenge the students on their knowledge and understanding of the content detailed in topic 9 of the Pearson Edexcel GCSE Physics specification. The wide range of activities in the engaging PowerPoint and accompanying resources will check on the knowledge of the forces and their effects topic and allow the students to recognise those areas which need further attention before the mock or terminal GCSE exams. This resource has been designed to cover as much of topic 9 as possible but the following points have received particular attention: What happens when objects can interact at a distance without contact What happens when objects can interact by contact Explain the difference between vector and scalar quantities using examples Draw free body diagrams Recall and use the equation to calculate the moment of a force Recall and use the principle of moments in situations where rotational forces are in equilibrium Explain ways of reducing unwanted energy transfer through lubrication The main task of the lesson which challenges students to use the principle of moments has been differentiated so that differing abilities can access the work

This fully-resourced revision lesson has been written to cover the major details of the electricity and circuits topic that can be assessed in the GCSE Physics and Combined Science (HT) exams. The engaging PowerPoint and accompanying resources contain a wide range of activities which include exam-style questions with clearly explained answers, differentiated tasks and quiz competitions to allow students to assess their understanding and to ultimately recognise those areas which need further consideration. The following points are covered in this revision lesson: The electrical symbols that represent the electrical components Describe the differences between series and parallel circuits Recall that a voltmeter is connected in parallel One volt is equal to one joule per coulomb Recall and use the equations that calculate energy transferred, charge, potential difference, power and electrical power Recall that an ammeter is connected in series Calculate the currents, potential differences and resistances in series and parallel circuits Explain how current varies with potential difference in resistors Know the functions of the wires in a plug and the safety features The main task of the lesson, which challenges the students to calculate the currents, potential differences and resistances in series and parallel circuits, is differentiated to allow students of differing abilities to access the work

An engaging lesson presentation (41 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit P1 (Energy) of the AQA GCSE Combined Science specification (specification unit P6.1). The topics that are tested within the lesson include: Energy stores and systems Changes in energy Efficiency Students will be engaged through the numerous activities including quiz rounds like “ERRORS with the equation calculations” whilst crucially being able to recognise those areas which need further attention

An engaging lesson presentation (84 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit P5 (Forces) of the AQA GCSE Combined Science specification (specification point P6.5). The topics that are tested within the lesson include: Gravity Speed Velocity Acceleration Newton’s laws Forces and braking Momentum Conservation of momentum Students will be engaged through the numerous activities including quiz rounds like “Can you go the DISTANCE” whilst crucially being able to recognise those areas which need further attention

This is a fully-resourced REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 7 (Magnetism and electromagnetism) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Poles of a magnet Electromagnetism Fleming’s left hand rule Electric motors Loudspeakers Transformers Of all of the Physics topics, this one tends to be one of the least well understood. Therefore, time has been taken to not only make this an engaging revision lesson but to go into detail on some of the topics which are commonly assessed in the exams. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is a concise REVISION lesson that contains an engaging powerpoint (28 slides) and is fully-resourced with associated worksheets. The lesson uses a range of activities which include exam questions (with displayed answers), differentiated tasks and quiz competitions to engage students whilst they assess their knowledge of the content that is found within topic P15 (Forces and matter) of the Edexcel GCSE Combined Science specification. The following sub-topics in the specification are covered in this lesson: Describe the difference between elastic and inelastic distortion Recall and use the equation for linear elastic distortion including calculating the spring constant Use the equation to calculate the work done in stretching a spring Describe the difference between linear and non-linear relationships between force and extension Investigate the extension and work done when applying forces to a spring This lesson can be used throughout the duration of the GCSE course, as an end of topic revision lesson or as a lesson in the lead up to mocks or the actual GCSE exams