If you want some targeted revision structure and pupil resources, then this resource may help. A set of exam question packs and past paper analysis to aid year 11 revision for foundation and higher. Each pack is roughly two hours of exam questions and includes all markschemes and examiner reports. (Two documents per tier. One just questions and the other questions, markscheme and examineers report. How is it different from other resources? They are themed around the specification points that HAVE NOT APPEARED in the last two years (or very infrequently). This works on the basis that spec codes roughly fall on a three-year cycle with AQA exams and therefore could likely appear in this year’s exam papers. Therefore each question pack contains two full exam questions for each spec point not assessed in the last two years and one full exam question, in rank order, for those assessed infrequently. It also includes the full analysis of spec points for both tiers over both years and filterable spec lists that could enable some structure to the lesson content covered as revision. Hopefully this will lead to a more productive approach, in terms of revision topics and time management, for both pupils and teachers. How does it work? (Finer detail) It highlights spec codes that HAVE NOT appeared in the last two years of exams or have a low relative frequency, leading to a very high probability of most of them appearing in the summer exams. This tool has analysed both papers for both years and completed a frequency count of each spec code. This summarises into a combined table to prepare for the summer exams. It highlights spec codes that have not been assessed by showing as green. It colours through a spectrum of green to red, of other specs which have been assessed, but infrequently. It shows this by a simple frequency count and relative frequency. The relative analysis tool shows how common it has appeared relative to the number of spec points. A low frequency could still have a high relative frequency if there aren’t that many spec point in that section, showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups. Each analysis is shown graphically leading to easy displays for pupils to review key areas and target their focus. On the following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then led to a checklist revision list for both F and H papers and a ranking order of likely topics to appear in the summer papers starting with units where a spec has not been assessed and then leading into those with low relative frequencies.

All spec codes must be examined through a three year period with AQA exams. This is a spec code frequency analysis of 2015-16 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in the last two years leading to a very high probability of them appearing in summer 2017. This tool has analysed 2016 and 2015 exam papers and completed a frequency count of each lettered spec code. This summarises into a combined table to prepare for the 2017 exams. It highlights lettered spec codes that have not been assessed in the last two years by showing as green. Being the last year of AQA Core exams before the 1-9 exams there is a very high probability of possible topics that will appear in the summer exams. It colours through a spectrum of red to green, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared in the last two years relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups. Each analyse is shown graphically leading to easy displays for pupils to review key areas to focus. On following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers. A F and H revision pack is then included with past exam question specifically themed on these areas to help support and lead revision up to the summer exams. Mark schemes and examiners reports are included for these questions. The aim of the support pack is to help prepare for the summer exams of 2017. This is a very unique situation where we can have a good chance of using this analyse to target revision and focus the pupils.

All spec codes must be examined through a three year period with AQA exams. This is a spec code frequency analysis of 2015-16 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in the last two years leading to a very high probability of them appearing in summer 2017. This tool has analysed 2016 and 2015 exam papers and completed a frequency count of each lettered spec code. This summarises into a combined table to prepare for the 2017 exams. It highlights lettered spec codes that have not been assessed in the last two years by showing as green. Being the last year of AQA Core exams before the 1-9 exams there is a very high probability of possible topics that will appear in the summer exams. It colours through a spectrum of red to green, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared in the last two years relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups. Each analyse is shown graphically leading to easy displays for pupils to review key areas to focus. On following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers. A F and H revision pack is then included with past exam question specifically themed on these areas to help support and lead revision up to the summer exams. Mark schemes and examiners reports are included for these questions. The aim of the support pack is to help prepare for the summer exams of 2017. This is a very unique situation where we can have a good chance of using this analyse to target revision and focus the pupils.

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.2.3.1-5.2.3.5 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well

A document with all you need to complete a periodic table display board. Elements listed to produce a periodic table. All labels included to present sections and colour coded. The first 20 in additional detail. Electronic configuration, pictures, name and symbols for additional information.

Documents to produce a flow chart display of careers from KS2 through to degree and future careers. All headings and pictures included and organised for you to generate display.

An AQA template designed to record and analyse ISA results. Scores are recorded per question for gap analysis. Overall grades compared to targets. Progress calculated per pupil and scores converted to UMS following AQA grade boundaries. Easily modified to match any ISA completed.

A set of documents used for pupils to quickly access all required documents to aid revision of Core and Additional Science Exams for 2017. I have uploaded under biology and physics as well, as there is no topic choice for just science. But it is the same set of documents as this, it includes all subjects for core and additional. Printable and displayable documents using QR codes, enabling pupils to scan and download straight to their electronic devices. Just project straight up on your board and off the pupils go. Or set up a display in the hallway for pupils to work independently away from the department using their devices. These QR codes cover all needed documents between 2013-2015 for both Core and Additional. (2016 are secure documents and not directly accessible by pupils) • Links to all exam papers. B1, C1, P1, B2, C2 and P2 for foundation and higher. • Links to all markschemes. B1, C1, P1, B2, C2 and P2 for foundation and higher. • Links to all examiners reports. B1, C1, P1, B2, C2 and P2 for foundation and higher. • Links to all pupils sheets. C1, C2, P1 and P2. • Links to all specifications. B1, C1, P1, B2, C2 and P2. • Links to all grade boundaries. B1, C1, P1, B2, C2 and P2 for foundation and higher. • Display headings document. Tried and tested with my classes and they really enjoy being able to scan and carry the documents away with them. These can be saved to their device and then emailed and printed like any other document.

Want to quickly and easily review a chapter of the AQA Combined Science Trilogy specification? Want to be able to lead pupils to a targeted revision list to enable them to close their gaps? This revision resource consists of a range of questions across the specific specification points. There are a minimum of two questions per spec code. The specification document has been closely used to guarantee the correct use of terminology and phrasing. This leads to pupils then self-marking after each sub topic. This will consist of them marking and noting the identified spec code in a WWW or EBI list. Once the quiz is completed they will then follow the instructions to create their own personalised review of the full quiz and self-generate their personalised revision list by specification name using the supplied list. This activity is 1-2 lessons depending on the depth of revision time you allow the pupils though these tasks can be class or homework. Lesson plan included.

All spec codes must be examined through a three-year period with AQA exams. This is a spec code frequency analysis of the 2018 exams for both foundation and higher exam papers leading to very specific lesson focus and pupil revision. It highlights spec codes that HAVE NOT appeared in last year’s exams or very infrequently, leading to a very high probability of most of them appearing in summer 2019. (Some spec point could be assessed in 2020 and still meet the three-year rule.) This tool has analysed 2018 foundation and higher exam papers and completed a frequency count of each spec code. This summarises into a combined table to prepare for the 2019 exams. It highlights spec codes that have not been assessed by showing as green. It colours through a spectrum of red to green, of other specs which have been assessed, but infrequently. It shows this by a simple count and relative frequency to the number of spec codes. The relative analysis tool shows how common it has appeared relative to the number of spec points. A low spec count could still have a high relative count showing a lower probability. There is also a combined summary for F and H papers if you teach mixed groups. Each analysis is shown graphically leading to easy displays for pupils to review key areas to focus. On the following tabs there is a full spec checklist filterable by their appearance in either F, H or both so pupils can view this information in a checklist explaining each spec point. This has then lead to a checklist revision list for both F and H papers. Exam questions have been made into a F and H assessment/revision document from AQA past papers and has been made specifically themed on these areas to help support and lead revision up to the summer exams. All markschemes and examiner reports are included. Hopefully this will lead to a more productive approach, in terms of revision topics and time management, for both pupils and teachers.

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.1.1.1-5.1.1.7 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well.

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.1.2.1-5.1.2.7 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.3.1.1-5.3.1.3 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.4.1.1-5.4.1.4 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.4.1.1-5.4.3.5 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well.

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.5.1.1-5.5.1.3 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.2.3.1-5.2.3.3 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.2.2.1-5.2.2.8 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well

A set of resources mapping to spec codes from the new AQA Combined Science Trilogy. 5.2.1.1-5.2.2.8 A sequence of lessons covering all areas of the specification. Lesson PowerPoint's of theory and differentiated tasks following an all, most and some principle. All theory presented for teacher to read through as you go. This leads to pupil tasks and resources that are differentiated and range in literacy and numeracy as well.