Lesson Powerpoint and activities for learning how the different forces (COMPRESSION, TENSION, TORSION AND SHEAR) and the different types of structures shell vs frame. This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson. This resource includes: Leveled WALT and WILF (Learning Objectives) Starter, main and plenary (printable worksheets within powerpoint) Lots of visual stimuli and printable resources included in powerpoint This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)

Lesson Powerpoint and activities teaching about the structures of different bridges. This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson. This resource includes: Leveled WALT and WILF (Learning Objectives) Starter, main and student task (printable worksheets within powerpoint) Lots of visual stimuli This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)

A set of lessons which cover Edexcel Design and Technology Core Content Objective AC1.2 Evaluatying new and emerging technologies to inform design decisions. The Powerpoint covers: ACCESS FM, Critical evaluation, Carbon Footprint, x4 R’s, Life Cycle Assessment A student friendly powerpoint with: Interesting activities Keywords and descriptions Starters and plenaries Levelled WALTS and WILFS (learning outcomes) Practice exam questions Appropriate levels of challenge This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.

A set of lessons which cover Edexcel Design and Technology Core Content Objective 1.8 Categorisation of Ferrous and Non- Ferrous Metals. The Powerpoint covers: Ferrous/ Non Ferrous, Mechanical and Physical properties, ductility, Malleability and hardness All topics are directly taken from the textbook and course specification. A student friendly powerpoint with: Interesting activities Keywords and descriptions Starters and plenaries Levelled WALTS and WILFS (learning outcomes) Practice exam questions Appropriate levels of challenge This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.

A revision activity linked to the exam unit 1. It covers the main objectives with key words and linked question. It could be used in lesson before mock exams or could be used as a home learning resource. Please look in my shop for further EDUQAS Construction resources. There is bundle with lessons and task for the whole of Unit 1.

Unit 1 Introduction to the Built Environment: AC 1.1 The Sector Teacher/ Student tracker for Unit 1 that students’ can Red, Amber, Green their understanding. All assessment criteria covered in detail and links directly to each lesson in the teaching powerpoints. It is clear and easy to see and can be stuck in student books, displayed on the board, or shown to parents. My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources. ** Please note this resource is available as part of my EDUQAS Construction and the Built Envrionment Starter Resource Bundle**

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.2 The Built Environment Life Cycle Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

A Powerpoint lesson on Bionics and how they have been developed by Biomedical Engineers. A number of activities, starter, You Tube examples and leveled learning objectives. Created for BTEC Engineering Unit 1 using information from the specification however can be used in STEM lessons or Design Technology Lessons. Learners can begin to understand the wider topic of new technologies.

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.4 Technologies and Materials Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.3 Types of Building and Structure Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

A set of lessons presented in a student friendly powerpoint which includes lots of different classroom based activities for Tiling, Painting and Bricklaying. WALTs and WILF’s are leveled and allows students to build up knowledge before they start practical tasks. Originally designed for WJEC Construction and the Built Environment course it is very versatile activities for all vocational Construction courses. Lots of ideas you can use :)

A set of lessons which cover Edexcel Design and Technology Core Content Objective AC1.4 Smart and composite materials and technical textiles. The Powerpoint covers: the different types of materials, their categories and their properties. All topics are directly taken from the textbook and course specification. A student friendly powerpoint with: Interesting activities Keywords and descriptions Starters and plenaries Levelled WALTS and WILFS (learning outcomes) A great Pick a Mix material activity Appropriate levels of challenge This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.

A set of lessons which cover Edexcel Design and Technology Core Content Objective AC1.12 Natural and Manufactured Timbers. The Powerpoint covers: Soft Wood, Hard Wood, Man made boards, hardness, toughness All topics are directly taken from the textbook and course specification. A student friendly powerpoint with: Interesting activities Keywords and descriptions Starters and plenaries Levelled WALTS and WILFS (learning outcomes) Practice exam questions Appropriate levels of challenge This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.

Brand New Controlled Assessment help guide for the 2025 Unit 3 EDUQAS Construction Brief with a focus on Bricklaying, Tiling and Carpentry skills. The template can be adapted or changed to suit the school but provides a clear framework that hits all the key assessment criteria to ensure student success. This can be bought as part of a bundle- very good value. This will include a template for Bricklaying, Tiling and Carpentry and detailed ‘How To Guide’ to support the teaching and learning of UNIT 3!

Brand New Controlled Assessment Template for the 2025 Unit 3 EDUQAS Construction Brief focusing on the carpentry skill. The template can be adapted or changed to suit the school but provides a clear framework that hits all the key assessment criteria to ensure student success. This can be bought as part of a bundle- very good value. This will include a template for Bricklaying, Tiling and Carpentry and detailed ‘How To Guide’ to support the teaching and learning of UNIT 3!

Brand New Controlled Assessment Template for the 2025 Unit 3 EDUQAS Construction Brief. The template can be adapted or changed to suit the school but provides a clear framework that hits all the key assessment criteria to ensure student success. This can be bought as part of a bundle- very good value. This will include a template for Bricklaying, Tiling and Carpentry and detailed ‘How To Guide’ to support the teaching and learning of UNIT 3!

A student friendly powerpoint including 4-5 lessons covering materials and processes taken directly from the BTEC Engineering Unit 1 specification A number of interesting activities (Starters, pleneries etc) and leveled learning objectives. This can be used for Product Design and is very versatile. Uses superhero (marvel) example to help children relate. Topics Covered: Material Classification: Smart, High Performance, Modern and Composite Uses (Products) Sectors of Engineering Manufacturing Processes Forces Deformation

A student friendly powerpoint covering two lessons on Aerodynamics and Blended Wingbodies based on the BTEC Engineering Unit1 Specification . 2- 3 lessons with a number of activities (starters etc.) which is can be used in Engineering but also other areas of Design Technology and STEM. Road bikes are used as an example to help students relate to the topic.

This is a student friendly powerpoint with lessons/ instructions and examples for students and teachers to complete Unit 1. The brief is the one that has been issued by WJEC (Re-design a phone charger) However it can be adapted to any brief you wish to set. The key areas covered are: Understanding the Brief Market Research Specification Design Ideas 3rd Angle Evaluation against Specification