For each of the two topics listed below, the same lesson to be taught to students whether they are in a classroom or distance learning at home. Switches in Series and Parallel Circuits Ohms Law They facilitate hybrid learning and provide equality of opportunity for students who are unable to attend school. Objectives To know: that switches open and close circuits. that one switch controls all the components in a series circuit. that components can be controlled individually by switches in a parallel circuit. how to position switches correctly in simple and complex parallel circuits. To know that: current is a flow of electrons; metal ions cause resistance in a conductor; electrons collide with the metal ions and loose energy which is converted to heat or light. the more metal ions the higher the resistance; collisions with metal ions reduce current; the higher the resistance the lower the current.; the comparative resistance of long/short and thick/thin wires R = V/ I Be able to: apply ohms law in simple calculations; apply ohms law in calculations having deduced the values for V and I using prior knowledge of series and parallel circuits; explain the use of materials in devices according to their resistance. The classroom resources consist of an animated 11 and 24 slide PowerPoint and 11 and 13 varied and exciting printables including a foldable, cut-and-stick and progress check. Each topic comes with a one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning resources consists of a 32 and 45 slide animated PowerPoint which, not only teach the science but also how to gain maximum benefit from distance learning. The PowerPoint shas been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. For more high quality resources visit: Elf Off the Shelf Resources

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for students who are unable to attend school. The classroom resource consists of an animated 24 slide PowerPoint and 11 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 54 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that: current is a flow of electrons; metal ions cause resistance in a conductor; electrons collide with the metal ions and loose energy which is converted to heat or light. the more metal ions the higher the resistance; collisions with metal ions reduce current; the higher the resistance the lower the current.; the comparative resistance of long/short and thick/thin wires R = V/I Be able to: apply ohms law in simple calculations; apply ohms law in calculations having deduced the values for V and I using prior knowledge of series and parallel circuits; explain the use of materials in devices according to their resistance. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for students who are unable to attend school. The classroom resource consists of an animated 10 slide PowerPoint and 13 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 32 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that switches open and close circuits. To know that one switch controls all the components in a series circuit. To know that components can be controlled individually by switches in a parallel circuit. To be able to position switches correctly in simple and complex parallel circuits. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

For each of the three topics listed below, the same lesson to be taught to students whether they are in a classroom or distance learning at home. Lamps in Series and Parallel Current in Series and Parallel Voltage in Series and Parallel They facilitate hybrid learning and provide equality of opportunity for students who are unable to attend school. Each classroom resource consists of an animated 12 to 15 slide PowerPoint and 12 to 16 varied and exciting printables including a foldable, cut-and-stick and progress check. Each topic comes with a one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. Each distance learning resource consists of a 45 to 49 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practicals, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that: voltage is measured in volts (v); voltage is measured by a voltmeter placed in parallel in a circuit. the battery voltage is shared across all the components in a series circuit and understand why; the voltage across each component is the same as that across the battery in a parallel circuit and understand why; units for current is the amp (A). ammeters measure current and are used in series. current is the same at all points in a series circuit; current divides in a parallel circuit; adding the current in each branch of a series circuit gives the current in the main part. if lamps are identical in a parallel circuit, the same current will flow through each; as lamps are added in a series circuit the lamps become dimmer; as identical lamps are added in a parallel circuit the brightness of the lamps does not change; if the lamps in a series circuit are identical, all the lamps are of equal brightness; if the lamps in a parallel circuit are identical, all the lamps are of equal brightness; if a lamp is removed or breaks in a series circuit, the others will go out; if a lamp is removed or breaks in a parallel circuit, the others will stay on. To be able to: draw series and parallel circuits from descriptions and sketches; deduce voltmeter readings in series and parallel circuits; deduce readings on ammeters and voltmeters in series and parallel circuits. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for students who are unable to attend school. The classroom resource consists of an animated 18 slide PowerPoint and 13 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 43 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective Know that current is a flow of electrons through a conductor. Know that batteries contain chemicals which provide the push or voltage to make current flow. I know that electrons collide with metal ions in a conductor and loose the energy they picked up from the battery with each collision. Know that resistance increases with the number of metal ions. I know that collisions slow down electric current. Be able to design an experiment and a results table. draw circuit diagrams from a description. Be able to draw a bar graph independently. Be able to explain the relationship between resistance and current. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for students who are unable to attend school. The classroom resource consists of an animated 16 slide PowerPoint and 13 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 39 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that an electric current is a flow of electrons which pick up energy from the battery. To know that, as batteries are added to a circuit, the voltage increases and the lamp gets brighter. To be able to make a prediction and design an experiment and results table to investigate the relationship between the number of batteries and voltage. To be able to draw a bar graph. To be able to calculate the output of n number of batteries from known numbers of batteries. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for students who are unable to attend school. The classroom resource consists of an animated 22 slide PowerPoint and 14 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 42 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that an electric current is a flow of electrons which pick up energy from the battery. To know that as batteries are added to a circuit current increases and the lamp gets brighter. To be able to make a prediction and design an experiment to investigate the relationship between the number of batteries and current. To be able to draw a bar graph. To be able to calculate the output of n number of batteries from known numbers of batteries, voltages and currents. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

For each of the three topics listed below, the same lesson to be taught to students whether they are in a classroom or distance learning at home. • Lamps in Series and Parallel • Current in Series and Parallel • Voltage in Series and Parallel They facilitate hybrid learning and provide equality of opportunity for students who are unable to attend school. Each classroom resource consists of an animated 12 to 15 slide PowerPoint and 12 to 16 varied and exciting printables including a foldable, cut-and-stick and progress check. Each topic comes with a one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. Each distance learning resource consists of a 45 to 49 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practicals, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that: voltage is measured in volts (v); voltage is measured by a voltmeter placed in parallel in a circuit. the battery voltage is shared across all the components in a series circuit and understand why; the voltage across each component is the same as that across the battery in a parallel circuit and understand why; units for current is the amp (A). ammeters measure current and are used in series. current is the same at all points in a series circuit; current divides in a parallel circuit; adding the current in each branch of a series circuit gives the current in the main part. if lamps are identical in a parallel circuit, the same current will flow through each; as lamps are added in a series circuit the lamps become dimmer; as identical lamps are added in a parallel circuit the brightness of the lamps does not change; if the lamps in a series circuit are identical, all the lamps are of equal brightness; if the lamps in a parallel circuit are identical, all the lamps are of equal brightness; if a lamp is removed or breaks in a series circuit, the others will go out; if a lamp is removed or breaks in a parallel circuit, the others will stay on. To be able to: draw series and parallel circuits from descriptions and sketches; deduce voltmeter readings in series and parallel circuits; deduce readings on ammeters and voltmeters in series and parallel circuits. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for students who are unable to attend school due to Covid-19. The classroom resource consists of an animated 12 slide PowerPoint and 13 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 36 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that voltage is measured in volts (v). To know that voltage is measured by a voltmeter placed in parallel in a circuit. To draw series and parallel circuits from descriptions and sketches. To know and understand why the battery voltage is shared across all the components in a series circuit. To know and understand why the voltage across each component is the same as that across the battery in a parallel circuit. Be able to deduce voltmeter readings in series and parallel circuits. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for vulnerable students who are unable to attend school due to Covid-19. The classroom resource consists of an animated 11 slide PowerPoint and 14 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 35 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know the units for and how to measure current. To know that current is the same throughout a series circuit. To know that if lamps are identical in a parallel circuit, the same current will flow through each. To know that, in a parallel circuit, the current in all the branches in a parallel circuit adds up to the current in the main part of the circuit. To be able to draw circuit diagrams from description. To be able to design results tables. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for students who are unable to attend school due to Covid-19. The classroom resource consists of an animated 10 slide PowerPoint and 12 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 45 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that as lamps are added in a series circuit the lamps become dimmer. To know that as identical lamps are added in a parallel circuit the brightness of the lamps does not change. To know that if the lamps in a series circuit are identical, all the lamps are of equal brightness. To know that if a lamp is removed or breaks in a series circuit, the others will go out. To know that if a lamp is removed or breaks in a parallel circuit, the others will stay on. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

For each of these three topics, current, voltage and resistance, conductors and insulators and circuit symbols and circuit diagrams, the same lesson to be taught to students whether they are in a classroom or distance learning at home. They facilitate blended learning and provide equality of opportunity for students who are unable to attend school due to Covid-19. Each classroom resource consists of an animated 12 to 15 slide PowerPoint and 12 to 16 varied and exciting printables including a foldable, cut-and-stick and progress check. Each topic comes with a one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. Each distance learning resource consists of a 45 to 49 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practicals, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective The three resources in this bundle: explain the terms current, voltage and resistance and the relationship between them; explore the conditions necessary for current to flow in a circuit; define and explain the terms conductor and insulator; identify the basic circuit symbols an introduce recognition of series and parallel circuits; provide practice in drawing circuit diagrams from sketches; provide practice in designing a test circuit and tables; provide practice in building circuits. More high quality resources available here. Elf Off the Shelf Resources

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for students who are unable to attend school due to Covid-19. The classroom resource consists of an animated 15 slide PowerPoint and 12varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 49 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To be able to recognise and draw the symbols for a battery, lamp, voltmeter, ammeter, switch, resistor and motor. To be able to draw simple and more complex circuit diagrams from sketches of circuits with actual apparatus. To be able to recognise and draw series and parallel circuits. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates hybrid learning and provides equality of opportunity for students who are unable to attend school. The classroom resource consists of an animated 13 slide PowerPoint and 13 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 37 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. The practical, whether real time in the classroom of simulated for distance learning, takes the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that conductors conduct electricity and non-metals do not. To know that metals are conductors and non-metals are insulators. To be able to design a test circuit and results table. To be able to explain why some materials are conductors. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

What are current, voltage and resistance and what is the relationship between them in an electrical circuit? What are the conditions necessary for current to flow in a circuit? Look no further for a unique and engaging explanation of these concepts! The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates hybrid learning and provides equality of opportunity for vulnerable students who are unable to attend school. The two packs in this resource allow the same lesson to be taught to students whether they are in a classroom or distance learning at home. It facilitates blended learning and provides equality of opportunity for students who are unable to attend school. The classroom resource consists of an animated 17 slide PowerPoint and 14 varied and exciting printables including a foldable, cut-and-stick and progress check. The one-page flowchart lesson plan shows where choices can be made between the printables so that the teacher can select the activities to suit the exact needs of their class. The distance learning pack consists of a 49 slide animated PowerPoint which, not only teaches the science but also how to gain maximum benefit from distance learning. The PowerPoint has been designed to replace the teacher by providing structure, sequence, knowledge and answers. Additional worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. These can be printed off by the student or provided by school. There is also a short digital test/homework which can be returned to the teacher. Both these action-packed lessons introduce current as a flow of electrons and explain the relationship between current, voltage and resistance using the analogy of a diver using up energy obtained from food and giving off heat as they swim through pipes filled either with water (low resistance) or water and rocks (high resistance). The food as a source of energy is then replaced by the battery, the diver by the electron and the rocks by metal ions. Both scenarios are animated in the PowerPoints. This explanation is then extended to compare the resistance of long, short, thick and thin wires. The practical (simulated for the distance learning pack) explores the conditions needed for current to flow in a circuit. Click on the resource for more details on the content of each pack. More high quality resources available here. Elf Off the Shelf Resources Other hybrid learning current electricity resources for middle school Current, Voltage and Resistance - Classroom, Distance & Blended Learning Conductors and Insulators - Classroom, Distance & Blended Learning Circuits and Symbols - Classroom, Distance & Blended Learning Current in Series and Parallel - Classroom, Distance & Blended Learning Lamps in Series and Parallel - Classroom, Distance & Blended Learning Voltage in Series & Parallel - Classroom, Distance & Blended Learning Batteries and Current - Classroom, Distance & Blended Learning Batteries and Voltage - Classroom, Distance & Blended Learning for KS3 Current and Resistance - Classroom, Distance & Blended Learning KS3 Intro to Current electricity 3 - Classroom, Distance & Blended Learning KS3 Ohms Law - Classroom, Distance & Blennded Learning for KS3 Switches in Series and Parallel - Classroom, Distance and Blended Learning for KS3 Intro to Current Electricity 4

Eleven action-packed distance or remote learning packages which cover all the topics included in current electricity for KS3. These resources have been designed so that the animated PowerPoint replaces the teacher by providing structure, sequence, knowledge and answers. The worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. The simulated practicals take the student through planning, designing a table and drawing conclusions from a given set of typical results. Topics included Explaining Current, Voltage and Resistance Conductors and Insulators Circuits and Symbols Lamps in Series and Parallel Current in Series and Parallel Voltage in Series and Parallel Batteries and Current Batteries and Voltage Resistance and Current Switches Ohms Law Resources An animated PowerPoint which guides the student through the lesson by: explaining how to use distance learning effectively; explaining how to use this resource; explaining current, voltage and resistance and the relationship between them; providing the answers to all the worksheets so that the students can mark and correct their work. Four worksheets, and two cut-out activities, the answers to which are in the PowerPoint. A foldable and cut-out activity so that students can record and organise their learning. A checklist for students to use to assess their progress. For those students without internet or a computer or a computer at home a condensed printable copy of the PowerPoint is provided for distribution by school. Ways to Use this Resource Upload PowerPoint and worksheets to school intranet. Students print their own worksheets. Upload PowerPoint and worksheets to school intranet and provide a hardcopy of worksheets for students. Those families who do not wish to collect worksheets or who are in isolation can print the worksheets at home. Students without photocopying facilities are instructed to write their answers in full sentences and to writs a sentence to describe any circuit diagrams drawn. More distance learning resources available: Elf Off the Shelf Resources

Three action-packed distance or remote learning packages including Batteries and Current, Batteries and Voltage and Explaining Resistance and Current These resources have been designed so that the animated PowerPoint replaces the teacher by providing structure, sequence, knowledge and answers. The worksheets, cut-outs, foldable and progress check provide a familiar medium for students to develop and test their knowledge, continue to develop their literacy skills and use their creativity to organise their learning and assess their progress. The simulated practicals take the student through planning, designing a table and drawing conclusions from a given set of typical results. Objective To know that an electric current is a flow of electrons which pick up energy from the battery. To know that as batteries are added to a circuit current increases and the lamp gets brighter. To be able to make a prediction and design an experiment to investigate the relationship between the number of batteries and current. To be able to draw a bar graph. To be able to calculate the output of n number of batteries from known numbers of batteries, voltages and currents. To know that an electric current is a flow of electrons which pick up energy from the battery. To know that as batteries are added to a circuit, voltage increases and a lamp gets brighter. To be able to make a prediction and design an experiment and results table to investigate the relationship between the number of batteries and voltage. To be able to calculate the output of n number of batteries from known numbers of batteries. Know that batteries contain chemicals which provide the push or voltage to make current flow. Know that electrons collide with metal ions in a conductor and loose the energy they picked up from the battery with each collision. Know that resistance increases with the number of metal ions. I know that collisions slow down electric current. Be able to design an experiment and a results table. Draw circuit diagrams from a description. Be able to explain the relationship between resistance and current. Resources An animated PowerPoint which guides the student through the lesson by: explaining how to use distance learning effectively; explaining how to use this resource; explaining current, voltage and resistance and the relationship between them; providing the answers to all the worksheets so that the students can mark and correct their work. Four worksheets, and two cut-out activities, the answers to which are in the PowerPoint. A foldable and cut-out activity so that students can record and organise their learning. A checklist for students to use to assess their progress. For those students without internet or a computer or a computer at home a condensed printable copy of the PowerPoint is provided for distribution by school. Ways to Use this Resource Upload PowerPoint and worksheets to school intranet. Students print their own worksheets. Upload PowerPoint and worksheets to school intranet and provide a hardcopy of worksheets for students. Those families who do not wish to collect worksheets or who are in isolation can print the worksheets at home. Students without photocopying facilities are instructed to write their answers in full sentences and to writs a sentence to describe any circuit diagrams drawn. More distance learning resources available: Elf Off the Shelf Resources