Year 10 Mock 2017 or just revision for the following: Edexcel CC2 Separating techniques Lesson 2 + 3 combined : Method of separation/CC2- Chromatography - CORE P + Method of separation/CC2 - Distillation - CORE P Objectives: To be able to describe how paper chromatography can be used to separate mixtures To calculate Rf values To understand the process of distillation STRETCH To complete extra questions to consolidate learning All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!! Please leave a comment and rate

Edexcel 9-1 TOPIC 5 Sc14 Quantitative analysis: Molar volumes of gases and Avogadro's law of gases SEPARATE or TRIPLE PAPER 1 TOPIC 5 SEPARATE SCIENCE PAPER 1 - NEW for SEPTEMBER 2017 Learning objectives: Objectives: STARTER: To know how to interconvert between cm3 and dm3 and to work out the concentration equation To know how to define molar volume of gases at room temperature and pressure To be able to use the molar volume in calculations involving the masses of solids and volumes of gases To understand how to use Avogadro’s law to calculate volumes of gases involved in gaseous reactions. All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying No exam questions due to copy write Main topics include: (H) - Avogadro's Law of gases - Molar volume equations with loads of examples - 10 question check up (my students have been struggling with polyatomic ions and formulas) - mini quiz at the end - exam question but not included -support sheet to help with calculations Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

Edexcel 9-1 Chemistry formulas All the formulas contained with the COMBINED and the SEPARATE science topics condensed into one table. Students can stick this in their books A mini test is also present, students can be tested regularly throughout the year to check if they are revising or SIMPLY ADD THE FORMULAS AS YOU GO Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

Edexcel 9-1 Chemistry formulas All the formulas contained with the COMBINED science topics condensed into one table. Students can stick this in their books A mini test is also present, students can be tested regularly throughout the year to check if they are revising or SIMPLY ADD THE FORMULAS AS YOU GO Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

Edexcel 9-1 TOPIC 5 Sc15 Dynamic Equilibria: Haber process Edexcel 9-1 Sc15b PART 1 ONLY (industrial processes sold separately) TOPIC 5 Dynamic Equilibria: Haber process + Le Chatelier’s principle SEPARATE TRIPLE PAPER 1 SEPARATE or TRIPLE PAPER 1 TOPIC 5 SEPARATE SCIENCE PAPER 1 - NEW for SEPTEMBER 2017 Learning objectives: Objectives: To understand Le Chatelier’s Principle (H) To predict how the position of the equilibrium is affected by changes in conditions(H) To understand how the time taken to reach equilibrium is affected by changes in the conditions (H) All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying No exam questions due to copy write Main topics include: (H) - Le Chatelier's principle -Changes in concentration, pressure, temperature and catalysts - Rate of reaction and time taken to reach equilibrium NEW TO SPEC - exam question but not included Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

CAN BE USED FOR ABOUT 3 LESSONS Edexcel CC9 PART 1-3 Calculations involving masses for the new 9-1 GCSE 3-4 lessons depending on how good student are at the calculations Mainly covering: TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017 A mock exam will be give after this batch of lessons - something different when you start revision MOCK EXAM FOR FREE https://www.tes.com/teaching-resource/edexcel-9-1-combined-foundation-chemistry-calculations-mini-mock-topic-1-key-concepts-11832472 Powerpoint with over 50 slides including worked examples, questions for the students to complete and then the answers of the questions. Some calculations include more than one method, to help stretch the brightest and support the lowest ability students in the FOUNDATION PAPERS. There is a summary slide for each paper (Paper 1 and Paper 2) and a calculations summary slide to show all the equations that students will need to know. QUESTIONS ATTACHED TO ALLOW STUDENTS TO WORK INDEPENDENTLY OR AT THEIR OWN PACE (THEY ARE THE SAME QUESTIONS AS IN THE POWERPOINT - SO ALL ANSWERS ARE IN THE POWERPOINT) Can set as homework or use in a revision lesson. Calculations include: Rf Value Relative Formula Mass Empirical from molecular Molecular Formula from Empirical Formula and Mr Empirical Formula from Reacting masses and % composition Conservation of Mass Reacting masses (without moles) Concentration (g/dm3) Please leave feedback

CAN BE USED FOR ABOUT 5 LESSONS OVER 140 SLIDES ACTIVATE - SHOWING THE FORMULA AND HOW IT WORKS DEMONSTRATE - ALLOWING STUDENTS TO COMPLETE THE QUESTIONS AFL - CHECKING ANSWERS (ALL ANSWERS PRESENT) Edexcel CC9 PART 1-3 Calculations involving masses for the new 9-1 GCSE 3-4 lessons depending on how good student are at the calculations Mainly covering TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017 Touching on TOPIC 7 Bond energy calculations for the higher tier students A mock exam will be give after this batch of lessons - something different when you start revision FOR THE MOCK I USED SEE https://www.tes.com/teaching-resource/edexcel-9-1-combined-higher-chemistry-calculations-mini-mock-topic-1-key-concepts-11822210 IT IS FREE Powerpoint with over 130 slides including worked examples, questions for the students to complete and then the answers of the questions. Some calculations include more than one method, to help stretch the brightest and support the lowest ability students. There is a summary slide for each paper (Paper 1 and Paper 2) and a calculations summary slide to show all the equations that students will need to know. QUESTIONS ATTACHED TO ALLOW STUDENTS TO WORK INDEPENDENTLY OR AT THEIR OWN PACE (THEY ARE THE SAME QUESTIONS AS IN THE POWERPOINT - SO ALL ANSWERS ARE IN THE POWERPOINT) Can set as homework or use in a revision lesson. Calculations include: Rf Value Isotope Calculation (H) Relative Formula Mass Empirical from molecular Molecular Formula from Empirical Formula and Mr Empirical Formula from Reacting masses and % composition Conservation of Mass Reacting masses (without moles) Concentration (g/dm3) Moles (H) Using Avogadro’s constant to calculate the number of atoms or molecules (H) Reacting masses (with moles) (H) Finding the Limiting Reagent (H) Using the limiting reagent to calculate the mass (H) Balancing equations (with moles) (H) Bond Enthalpy (H) Please leave feedback

CAN BE USED FOR ABOUT 8 LESSONS OVER 187 SLIDES ACTIVATE - SHOWING THE FORMULA AND HOW IT WORKS DEMONSTRATE - ALLOWING STUDENTS TO COMPLETE THE QUESTIONS AFL - CHECKING ANSWERS (ALL ANSWERS PRESENT) Edexcel CC9 PART 1-3 Calculations involving masses for the new 9-1 GCSE 6-8 lessons depending on how good student are at the calculations Mainly covering TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017 TOPIC 5 SEPARATE SCIENCE PAPER 1: QUANTITATIVE ANALYSIS Touching on TOPIC 7 Bond energy calculations for the higher tier students Powerpoint with over 187 slides including worked examples, questions for the students to complete and then the answers of the questions. Some calculations include more than one method, to help stretch the brightest and support the lowest ability students. There is a summary slide for each paper (Paper 1 and Paper 2- separate science/ triple science) and a calculations summary slide to show all the equations that students will need to know over the 2 separate science papers. QUESTIONS ATTACHED TO ALLOW STUDENTS TO WORK INDEPENDENTLY OR AT THEIR OWN PACE (THEY ARE THE SAME QUESTIONS AS IN THE POWERPOINT - SO ALL ANSWERS ARE IN THE POWERPOINT) Can set as homework or use in a revision lesson. Calculations include: COMBINED SCIENCE… Rf Value Isotope Calculation (H) Relative Formula Mass Empirical from molecular Molecular Formula from Empirical Formula and Mr Empirical Formula from Reacting masses and % composition Conservation of Mass Reacting masses (without moles) Concentration (g/dm3) Moles (H) Using Avogadro’s constant to calculate the number of atoms or molecules (H) Reacting masses (with moles) (H) Finding the Limiting Reagent (H) Using the limiting reagent to calculate the mass (H) Balancing equations (with moles) (H) Bond Enthalpy (H) SEPARATE SCIENCE … Percentage yield Reacting Masses and percentage yield Atom Economy Concentration (moldm-3) Concentration – converting between moldm-3 and gdm-3 Titration equations Molar volume of gases – with volume and masses Please leave feedback

A 6 mark question lesson FOR INDEPENDENT STUDY that explains how to answer 6 mark questions for students. Ideal answers given SHEETS FOR PRINTING

TOPIC 7 Rates of reaction PAPER 2- NEW for SEPTEMBER 2017 CC14 Rates of reaction Edexcel 9-1 CC14 Revision MAT / SHEET for Rates of Reaction TOPIC 7 Rate of reaction and energy changes PAPER 12 - NEW for SEPTEMBER 2017 PLEASE NOTE - THESE MATS ARE MEANT TO BE PHOTOCOPIED AND LAMINATED FOR STUDENTS TO WORK ON PAPER (DUE TO LIMITED PHOTOCOPYING WITHIN THE DEPARTMENT CURRENTLY); THEY CAN BE ADAPTED SO STUDENTS CAN WRITE ON THEM BUT THAT IS ENTIRELY YOUR CHOICE 8 mats in total REVISION MATs - PART 1 to 8 ALL ANSWERS PROVIDED Part 1: Rates of reactions Part 2: Collision Theory Part 3: Concentration Parts 4: Surface Area CORE PRACTICAL Part 5: Temperature CORE PRACTICAL Part 6: Catalysts Part 7: Graphs Part 8: Ideal answers for exam questions - nothing to fill in just crib sheets USED FOR REVISION OF Rates of Reactions Main topics include: Rates of reaction Activation Energy Collision Theory Concentration Temperature Core practicals Surface Area Catalysts Graphs All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS

TOPIC 7 Rates of reaction and Energy changes PAPER 2- NEW for SEPTEMBER 2017 CC15 Energy Changes Edexcel 9-1 CC15 Revision MAT / SHEET for Energy Changes TOPIC 7 Rate of reaction and energy changes PAPER 2 - NEW for SEPTEMBER 2017 PLEASE NOTE - THESE MATS ARE MEANT TO BE PHOTOCOPIED AND LAMINATED FOR STUDENTS TO WORK ON PAPER (DUE TO LIMITED PHOTOCOPYING WITHIN THE DEPARTMENT CURRENTLY); THEY CAN BE ADAPTED SO STUDENTS CAN WRITE ON THEM BUT THAT IS ENTIRELY YOUR CHOICE 3 mats in total REVISION MATs - PART 1 to 3 ALL ANSWERS PROVIDED Part 1:Energy Changes - Endothermic and Exothermic Part 2: Energy Changes - MEXican BEN Part 3: Energy Changes - Bond Energy USED FOR REVISION OF Rates of Reactions Main topics include: Activation Energy Endothermic Exothermic MEXican BEN Bond Breaking Bond Making Bond energy Enthalpy All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!! PLEASE LEAVE FEEDBACK and REVIEWS

AQA GCSE 9-1 CHEMISTRY UNIT 3.2 Amount of substance HIGHER moles, limiting reagent 4.3.2 Use of amount of substance in relation to masses of pure substances 4.3.2.1 Moles (HT only) 4.3.2.2 Amounts of substances in equations (HT only) 4.3.2.3 Using moles to balance equations (HT only) 4.3.2.4 Limiting reactants (HT only) 4.3.2.5 Concentration of solutions Content split over 6 lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Homework Homework can also be used as extension sheets in lessons - or for higher ability students Accompany with https://www.tes.com/teaching-resource/aqa-gcse-9-1-chemistry-unit-3-1-chemical-measurements-conservation-of-mass-equations-no-moles-12167318 Lesson 1 & 2: Moles basics To understand the terms molar mass and mole To know that moles are the unit for amount of substance and to be able to use the molar equation To be able to calculate the number of atoms in elements and molecules Lesson 3: Reacting masses with moles To explain balanced symbol equations in terms of moles To be able to calculate the amount of product from a given reactant To consolidate learning with exam questions Lesson 4: Balancing equations with moles To complete the moles recap starter To understand how to deduce the stoichiometry of a reaction from the masses of the reactants and products to enable us to write the balanced equation To consolidate learning with further questioning Lesson 5 & 6: Limiting reagents To understand the term ‘limiting reagent’ To be able to identify the limiting reactant in a reaction To be able to calculate the mass of the reactant from the limiting reactant using moles Lesson 7: Concentration of solutions g/dm-3 (no moles) To be able to define the term ‘concentration’ (H) To be able to convert between cm3 and dm3 To understand how to calculate the concentration of solutions in g dm-3 or g/dm3

7 lessons for remote learning for Covid-19/CORONAVIRUS time at home THere are answers, step by step instructions on each powerpoint, test and even a practical along with submission requests from students. The lessons are different and interesting and will definitely engage the students at this challenging time for all of us.

12 Lessons for remote learning for Covid-19/CORONAVIRUS time at home THere are answers, step by step instructions on each powerpoint, test and even a practical along with submission requests from students. The lessons are different and interesting and will definitely engage the students at this challenging time for all of us. Package includes Instructions for teachers (telling the teachers how to organise the work) Lesson 1: s, l G Lesson 2: Soluble and insoluble Lesson 3: Dissolving Lesson 4: Solution and mass Lesson 5: Evaporation Lesson 6: Filtering and evaporation Lesson 7 + 8: distillation Lesson 9: Chromatography Lesson 10 : Worksheets Lesson 11: Mini quiz + answers and revision lesson Lesson 12: Test (submission*)

4.4.3 Electrolysis 4.4.3.1 The process of electrolysis 4.4.3.2 Electrolysis of molten ionic compounds 4.4.3.3 Using electrolysis to extract metals 4.4.3.4 Electrolysis of aqueous solutions Required practical 3: investigate what happens when aqueous solutions are electrolysed using inert electrodes. This should be an investigation involving developing a hypothesis. 4.4.3.5 Representation of reactions at electrodes as half equations (HT only) Content split over 12 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1: Electrolysis the basics To recall the properties of ionic compounds from year 9 To understand the terms electrolysis, electrolytes, anode, cathode and electrodes To explain the movement of ions during electrolysis Lesson 2 + 3 Molten PLUS DEMONSTRATION AND HT 1/2 equations To explain OILRIG in terms of electrodes To watch the demonstration of the electrolysis of lead bromide To explain how to predict the products of electrolysis of molten ionic solids with half equations (HT) Lesson 4: Extracting metals (Aluminium) To recall how metals are extracted from ores To explain how aluminium is manufactured To write half equations Lesson 5 + 6: Aqueous PLUS HT 1/2 equations To recall the preferential discharge of ions To explain how to predict the products of electrolysis of aqueous solutions To consolidate learning Lesson 7, 8 and 9: PRACTICALS and HT 1/2 equations To devise a hypothesis about the products that will be formed at the electrodes To complete a practical To consolidate learning Lesson 10: Electrolysis of Water To observe the electrolysis of water To explain the electrolysis of water To consolidate learning by reviewing the practical completed on aqueous solutions Lesson 11: Copper To investigate the change in mass of the anode and of the cathode, when copper sulfate solution is electrolysed between copper electrodes To explain how this process can be used to purify copper To explain the reactions taking place at the copper electrodes (H) Lesson 12: RUSTING To explain how experimental results can be used to show the conditions necessary for rusting To explain in detail how to prevent iron from rusting To consolidate using questions

4.5 Energy changes 4.5.1 Exothermic and endothermic reactions 4.5.1.1 Energy transfer during exothermic and endothermic reactions Required practical 4: investigate the variables that affect temperature changes in reacting solutions such as, eg acid plus metals, acid plus carbonates, neutralisations, displacement of metals. 4.5.1.2 Reaction profiles 4.5.1.3 The energy change of reactions (HT only) Content split over 11 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1: Endothermic and exothermic To recall the definitions of endothermic and exothermic reactions To list several endothermic and exothermic reactions To consolidate learning with questions Lesson 2: PRACTICALS PRACTICAL 1132 - Reaction between zinc (I want magnesium) and copper sulphate solution PRACTICAL 1134 - Investigating the reaction between calcium oxide (I want ammonium nitrate and water) and water To be able to recognise an endothermic and exothermic reaction from practical data To consolidate learning with questions To complete a 6 mark exam question Lesson 3 and 4: REQUIRED PRACTICAL To plan an experiment To complete a practical based on your plan To evaluate the practical completed Lesson 5: MEXICAN BEN (HT) To complete a 10 question recall To be able to describe these reactions in terms of bond breaking and making (HT) To be able to explain the overall heat energy change for a reaction (HT) Lesson 6: Reaction profiles To recall the terms activation energy To be able to draw and interpret simple graphical representations of energy changes occurring in chemical reactions Consolidate learning with questions Lesson 7: Energy profile To complete a 10 question check up To understand energy changes To be able to calculate the energy change in a reaction given the energies of bonds (in kJmol-1) (H)

4.4.2 Reactions of acids 4.4.2.1 Reactions of acids with metals 4.4.2.2 Neutralisation of acids and salt production 4.4.2.3 Soluble salts 4.4.2.4 The pH scale and neutralisation 4.4.2.5 Titrations (chemistry only) 4.4.2.6 Strong and weak acids (HT only) Content split over 12 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson1 Acid introduction PLUS PRACTICAL To recall some common acids and bases To explain the use of the pH scale and the use of indicators To consolidate learning with questions Lesson 2: Salt formation To be able to write word equations for neutralisation reactions To recall how to construct formulae from ions To be able to write symbol equations Lesson 3: Types of acid HIGHER To describe neutralisation in terms of H+ and OH- ions (H) Ionic equations - we teach it again here) To know how pH is determined (H) To explain in detail how the changes in concentration of hydrogen ions affect the pH of a solution (H) Lesson 4: Types of acid 2 HIGHER To explain the terms dilute and concentrated To explain the difference between weak and strong acids, with respect to the degree of dissociation of ions (H) To consolidate learning with questions Lesson 5: Soluble salt with insoluble metal oxide (REQUIRED PRACTICAL 1) To investigate how to prepare a soluble salt To apply learning to questions To consolidate learning Lesson 6: Questions for RP1 Lesson 7: Metals and acid To explain the general reactions for metals and the chemical test to identify the products To make a salt using direct combination To consolidate with a purple sheet assessment Lesson 8: Carbonates PLUS PRACTICALS To complete a practical To explain the general reactions for metal carbonate and the chemical test to identify the products To consolidate with a purple sheet assessment Lesson 9 + 10: Titration TRIPLE PLUS PRACTICAL To be able to prepare a soluble salt from an acid and a soluble reactant (alkali) To compare methods of preparing soluble salts To consolidate learning with questions Lesson 11 + 12: Soluibility PLUS PRACTICAL To recall the rules which describe the solubility of substances in water To be able to predict, using the solubility rules, if a precipitate will form in reactions To be able to describe the method used to prepare a pure, dry sample of an insoluble salt

4.10.4 The Haber process and the use of NPK fertilisers (chemistry only) 4.10.4.1 The Haber process 4.10.4.2 Production and uses of NPK fertilisers Content split over 7 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying L1 + 2 Dynamic equilibrium Objectives: To complete a practical exercise To explain what is meant by the term dynamic equilibrium To consolidate learning with questions LEsson 3, 4 + 5: Le Chatelier Objectives: To recall how the position of a dynamic equilibrium is changed To understand Le Chatelier’s Principle (H) To predict how the position of the equilibrium is affected by changes in temperature, pressure and concentration (H) To understand how the time taken to reach equilibrium is affected by changes in the conditions (H) Lesson 6: Haber Process Objectives: To recall the conditions for the Haber process To explain how the conditions are chosen for industrial chemical reactions (H) To explain the reaction pathways chosen from industrial processes (H) Lesson 7: Fertilisers Objectives: To recall 3 essential elements for plant growth To be understand how to name several fertilisers made from different acid and alkali compounds To describe and compare the laboratory preparation and the industrial production of ammonium sulfate

Unit 10 Using resources 4.10.3 Using materials (chemistry only) 4.10.3.1 Corrosion and its prevention 4.10.3.2 Alloys as useful materials **4.10.3.3 Ceramics, polymers and composites NOT INCLUDED ** Content split over 2 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying LEsson 1 Rusting Objectives: To explain how experimental results can be used to show the conditions necessary for rusting To explain in detail how to prevent iron from rusting To consolidate using questions Lesson 2: Alloys Objectives: To be able to explain why alloys are harder than pure metals To give examples of different alloys and their uses To consolidate using questions