Theory PowerPoint, Theory lesson sheet plus homework. Please see me other Engineering Theory topics and front cover sheet.

Theory PowerPoint, Theory lesson sheet plus homework. Please see me other Engineering Theory topics and front cover sheet.

A small 6 lesson engineering project (can be used in the run up to Christmas) based on producing a candlestick. Focuses on developing turning and riveting skills. PowerPoint has embedded gif’s to illustrate turning stages which makes it easy for students to follow.

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

I am developing a full range of theory lessons to support the new AQA design technology GCSE 9-1. There are 30 lessons that are taught one a week throughout Y10. Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. To support the theory lessons I have uploaded, please download my pupil tracker sheet. As well as theory lessons I have uploaded project/skills learning journeys that can be easily customised to the projects you are delivering. All content is fully branded and is graphically consistent. Please check out my other resources and give feedback if you find my resources helpful. If there are any missing video links, please contact me and I will send.

I have created an introduction lesson for use when delivering the new AQA NEA courswrok task. I have stated the contextual challenges and unpacked them with a slant towards Graphics. However the structure can easily be tweaked to focus on any material base. Please see me other NEA documents for a complete picture of the work I do.

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

A set of front covers for the theory lessons that I have generated to deliver the content of the AQA DT 9-1 GCSE. There are 4 in total and they are to be used in conjunction with the theory lessons I have uploaded here. They include space for students to record their performance and log any DIRT work that has been carried out.

This is a booklet used to track students progress through the 7 practical projects of the new V Cert NCFE Engineering qualification.

This project will give students an introduction to polymers, how they can be shaped through vacuum forming and formed using the sander, drill and countersink. You will also develop a solid working understanding of 2D Design in order to create an orthographic drawing. Manual isometric sketching will be developed with the use of traditional drawing equipment. Please check out my other resocurces. I am unable to attach the 2D Design files, please email me and will send directly.