A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A highly engaging and information lesson presentation (46 slides) which guides students through the steps needed to construct an accurate distance-time graph and then teaches them how to interpret the motions that are shown by the different lines. The lesson challenges the students to work out the type of graph that should be used to present the data and to suggest which factor from the blank table should go on the x-axis. Using the results that they obtain, a step-by-step guide is used to walk students through constructing the graph. This includes deciding on scales to ensure they are even and make the most of the available paper. Student will see the four key terms of motion associated with these graphs (acceleration, deceleration, constant speed and stationary) and will be able to use their graph to work out which lines go with which motion. Moving forwards, students will be shown how to calculate speed from the graph. There are progress checks throughout the lesson so that students can assess their understanding of the topic.
This lesson has been designed for GCSE students but is perfectly suitable for KS3 students too.
All 9 of the lessons included in this bundle are fully resourced and have been designed to cover the detailed content of module 5.2.2 (Respiration) of the OCR A-Level Biology A specification.
The following specification points are covered by this bundle of lessons:
The need for cellular respiration
The structure of the mitochondrion
The process and site of glycolysis
The link reaction and its site in the cell
The process and site of the Krebs cycle
The importance of coenzymes in cellular respiration
The process and site of oxidative phosphorylation
The chemiosmotic theory
The process of anaerobic respiration in eukaryotes
The difference in the relative energy values of carbohydrates, lipids and proteins
The use and interpretation of the respiratory quotient
All of the lessons are detailed and engaging and contain regular progress checks so that students can assess their understanding of the current topic as well as prior knowledge checks to enable links between topics and modules to be seen
It is estimated that these lessons will cover in excess of a month’s A-level Biology teaching time
This fully-resourced lesson describes the process of anaerobic respiration in eukaryotes and explains how pyruvate can be converted to lactate or ethanol using the hydrogen atoms released from reduced NAD and that the reoxidation of this coenzyme allows glycolysis to continue. The engaging and detailed PowerPoint and accompanying differentiated resources have been designed to cover the first part of point 5.2.2 (i) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply their knowledge and understanding of anaerobic respiration in mammals and yeast.
The lesson begins with a focus on the coenzyme, NAD, and students are challenged to recall details of its role in the oxidation of triose phosphate. Students will recall that oxidative phosphorylation in aerobic respiration allows these coenzymes to be reoxidised and therefore recognise that another metabolic pathway has to operate when there is no oxygen available. Time is taken to go through the details of the lactate and ethanol fermentation pathways and students are encouraged to discuss the conversions before applying their knowledge to complete diagrams and passages about the pathways. Understanding checks in a range of forms are used to enable the students to assess their progress whilst prior knowledge checks allow them to recognise the links to earlier topics.
This lesson has been written to tie in with the other uploaded lessons on glycolysis and the stages of aerobic respiration
This fully-resourced lesson looks at the process and site of the Krebs cycle and explains the importance of decarboxylation, dehydrogenation, the reduction of NAD and FAD and substrate level phosphorylation. The engaging and detailed PowerPoint and accompanying resource have both been designed to cover point 5.2.2 (e) of the OCR A-level Biology A specification and includes the formation of citrate from the acetyl group of acetyl CoA and oxaloacetate and the regeneration of this four carbon molecule.
The lesson begins with a version of the Impossible game where students have to spot the connection between 8 of the 9 terms and will ultimately learn that this next stage is called the Krebs cycle. The main part of the lesson challenges the students to use descriptions of the main steps of the cycle to continue their diagram of the oxidation-reduction reactions. Students are continually exposed to key terminology such as decarboxylation and dehydrogenation and they will learn where carbon dioxide is lost and reduced NAD and FAD are generated. They will also recognise that ATP is synthesised by substrate level phosphorylation. The final task challenges them to apply their knowledge of the cycle to work out the numbers of the different products and to calculate the number of ATP that must be produced in the next stage if the theoretical yield of 32ATP is to be achieved.
This lesson has been designed to tie in with the other uploaded lessons on glycolysis, anaerobic respiration, the Link reaction, oxidative phosphorylation and respiratory substrates
This clear and concise lesson covers the Link reaction and its site in the cell as detailed in point 5.2.2 (d) of the OCR A-level Biology A specification. The PowerPoint explains how the product of glycolysis, pyruvate, is decarboxylated and dehydrogenated and combined with coenzyme A to form acetyl coenzyme A which will then enter the Krebs cycle.
The lesson begins with a challenge, where the students have to recall the details of glycolysis in order to form the word matrix. This introduces the key point that this stage occurs in this part of the mitochondria and time is taken to explain why the reactions occur in the matrix as opposed to the cytoplasm like glycolysis. Moving forwards, the Link reaction is covered in 5 detailed bullet points and students have to add the key information to these points using their prior knowledge as well as knowledge provided in terms of NAD. The students will recognise that this reaction occurs twice per molecule of glucose and a quick quiz competition is used to test their understanding of the numbers of the different products of this stage. This is just one of the range of methods that are used to check understanding and all answers are explained to allow students to assess their progress.
This lesson has been written to tie in with the other uploaded lessons on glycolysis and the Krebs cycle and oxidative phosphorylation.
An informative lesson presentation (37 slides) and accompanying worksheets that guides students through the different methods that can be used to rearrange formulae as they will be required to do in the Science exams. The lessons shows them how to use traditional Maths methods involving inverse operations and also equation triangles to come to the same result. These are constantly linked to actual examples and questions to show them how this has to be applied. There are regular progress checks, with explained answers, so that students can assess their understanding.
An informative lesson presentation (30 slides) that ensures that students know the meaning of the independent, dependent and control variables in an investigation and are able to identify them. Students are challenged to use their definitions to spot the independent and dependent variable from an investigation title. Moving forwards, they are shown how they can use tables and graphs to identify them. The rest of the lesson focuses on the control variables and how these have to be controlled to produce valid results
This lesson is suitable for students of all ages studying Science as it is such a key skill
This engaging and detailed lesson presentation (43 slides) uses a step by step guide to take students through the important scientific skill of drawing graphs to represent data and address all the misconceptions and misunderstandings that often accompany this topic. The lesson begins by explaining to the students how to decide whether data should be represented on a line graph or a bar chart and a competition called "To BAR or not to BAR" is used to allow them to check their understanding while maintaining motivation. Moving forwards, students are shown a 6 step guide to drawing a line graph. Included along the way are graphs that are wrong and explanations as to why so that students can see what to avoid. There are continuous progress checks and a homework is also included as part of the lesson.
This lesson is written for students of all ages who are studying Science.
An informative lesson presentation (26 slides) that shows students how to convert between numbers and standard form (and the other way) so they are able to understand when these are used in Science questions. The lesson begins by guiding them through how to change numbers to standard form and explains when a power of 10 that is positive will be achieved and when it will be negative. Students are given the opportunity to see these used in a Science question and there is a cross-subject link as they are also required to convert between units. A number of competitions are used near the end of the lesson to maintain motivation and to allow the students to check their progress in a fun way
This lesson has been designed for GCSE students but is suitable for KS3
This bundle of 6 engaging and motivating lesson presentations and associated worksheets uses a combination of exam questions, quick tasks and quiz competitions to test the students on their knowledge of the key topics of the Chemistry modules of OCR Gateway A GCSE Combined Science specification. The knowledge of the following modules can be assessed using these lessons:
C1: Particles
C2: Elements, compounds and mixtures
C3: Chemical reactions
C4: Predicting and identifying reactions and products
C5: Monitoring and controlling chemical reactions
C6: Global challenges
A fully resourced lesson presentation (60 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit C2 (Elements, compounds and mixtures) of the OCR Gateway A GCSE Combined Science specification.
Relative formula mass
Empirical formula
Pure and impure substances
Filtration and crystallisation
Distillation
Chromatography
Electronic structure
Forming ions
Simple molecules
Giant covalent structures
Carbon
Students will be engaged through the numerous activities including quiz rounds like “Take the HOTSEAT” and “SEPARATE the fact from the fiction” whilst crucially being able to recognise those areas which need further attention
An engaging lesson presentation (48 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit C1 (Particles) of the OCR Gateway A GCSE Combined Science specification.
The topics that are tested within the lesson include:
Introducing particles
Chemical and physical changes
Atomic structure
Isotopes
Developing the atomic model
Students will be engaged through the numerous activities including quiz rounds like “SPOT the SCIENTIST” and “Order, Order” whilst crucially being able to recognise those areas which need further attention
A series of 5 exam questions that challenge students to work out the actual size of a section as seen under a microscope or the magnification. These questions will test their ability to convert between measurements and give answers in micrometers. These questions are suitable for GCSE and A-level students
An engaging lesson presentation (45 slides) that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit P6 (Waves) of the AQA GCSE Combined Science specification (specification point P6.6).
The topics that are tested within the lesson include:
Longitudinal and transverse waves
Properties of waves
Types of EM waves
Properties and applications of EM waves
Students will be engaged through the numerous activities including quiz rounds like “Tell EM the word” and “Take the HOTSEAT” whilst crucially being able to recognise those areas which need further attention
An engaging lesson presentation (48 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit P4 (Atomic structure) of the AQA GCSE Combined Science specification (specification point P6.4).
The topics that are tested within the lesson include:
The structure of an atom
Isotopes
Radioactive decay and nuclear radiation
Nuclear equations
Half-lives
Students will be engaged through the numerous activities including quiz rounds like “It’s as easy as ABG” and “ALPHA or BETA” whilst crucially being able to recognise those areas which need further attention
A fun and engaging lesson presentation (33 slides) and associated worksheet that uses exam questions, with fully explained answers, quick tasks and competitions to allow students to assess their understanding of Module 3.1.2 (Transport in Animals). The students will enjoy the lesson whilst being able to recognise which areas of the specification need further attention. Competitions included in the lesson are “SPOT THE ERROR”, “Where’s Lenny” and “Crack the code”
A highly engaging lesson presentation (60 slides) and accompanying worksheets that uses exam questions (with explained answers), quick tasks and competitions to allow students to assess their understanding of the topic of Genes and Health (Topic 2). Students will have fun whilst recognising those areas of the specification which need further attention. Competitions include "Blockbusters" Hotseat" and "james BOND" so that literacy and numeracy skills are tested along with the content knowledge.
A highly engaging lesson presentation (74 slides) and accompanying worksheets that uses exam questions (with explained answers), quick tasks and quiz competitions to allow students to assess their understanding of the topic of Biological molecules (Topic 3.1). Students will have fun whilst recognising those areas of the specification which need further attention.
A concise lesson presentation (20 slides) that looks at how the collision theory is related to the rate of reaction. This is a short lesson that would be taught at the beginning of the topic that looks at the rate of reaction and the factors that affect the rate. Students are challenged with a quick competition that gets them to recognise keywords which are involved in the collision theory. Some time is then taken to focus on "activation energy" and how this is shown on a reaction profile. Finally, students will use their keywords to form a clear definition for the collision theory which includes its link to the rate of reaction so this can be used in the upcoming lessons
This lesson has ultimately been designed for GCSE students but can be used with all age groups as an introduction to the topic