This lesson uses 17 multiple-choice questions to challenge students to apply their understanding to the calculation sections of the course. The PowerPoint and accompanying resources are designed to act as revision during the final weeks leading up to the AQA GCSE Combined chemistry exams and the following topics are covered: Atoms and ions Isotopes Concentration of solutions Mole calculations using Avogadro’s constant Calculating relative formula mass Mole calculations using mass and relative formula mass Calculating masses in reactions Calculating energy changes in reactions Calculating the mean rate of reaction All 17 questions have answers embedded into the PowerPoint along with explanations and are followed by additional tasks to further check understanding if it was initially limited.

This lesson revisits the topic of random and systematic errors and also challenges students on other scientific skills such as identifying variables. Students tend to find this topic confusing, so the PowerPoint and accompanying resources have been designed to support them to identify whether an error is random or systematic and then to understand what to do next. The lesson guides the students through a series of real life examples and shows them how to spot each type of error. There is a considerable mathematical element to this lesson, including the calculation of means or missing values in a table. The lesson concludes with a series of exam-style questions where the students have to apply their understanding of identifying errors, variables and calculating means.

This detailed revision lesson challenges the students on their understanding of the reactions of acids with metals to produce salts and hydrogen. The PowerPoint and accompanying resources focus on the details of point 4.2.1 in the AQA GCSE chemistry and combined specifications, and time is spent reminding the students that these reactions are redox reactions. The students are given the general word equation for acids reacting with metals and are challenged to recall how to name the salts according to the metal and acid involved in the reaction. They are reminded that redox reactions involve the loss and gain of electrons and are challenged to identify the substances which are reduced or oxidised in specific examples. In addition to the reactions of acids with metals, this revision lesson also challenges them to write chemical formulae, balance symbol equations, and to identify the tests for gases.

This lesson explains how the complete combustion of hydrocarbons produces carbon dioxide and water and explains how write equations to represent these reactions. The PowerPoint and accompanying resources are part of the second lesson in a series of 2 which have been designed to cover the detail in point 7.1.3 of the AQA GCSE Chemistry & Combined Science specifications. As shown in the cover picture, the lesson starts with a challenge where the students have to recognise the key term combustion from its suffix and a brief definition. Moving forwards, students will discover that the combustion of hydrocarbons releases energy and during this reaction, the carbon and hydrogen are oxidised. Time is taken to emphasise that sufficient oxygen needs to be present for complete combustion to occur and that if the supply is plentiful then carbon dioxide and water will be produced. The main part of the lesson uses a step by step guide to show students how to write word equations and balanced symbol equations for these reactions, before they are challenged to apply their understanding to write their own. All of the exam questions have mark schemes embedded into the PowerPoint to allow the students to self-assess. The final part of the lesson uses an internet article about carbon monoxide poisoning to introduce that this toxic gas can be produced when oxygen is insufficient.

This lesson introduces the alkanes as a group of hydrocarbons and explains how to draw their displayed formula and work out the general formula. The PowerPoint is part of the second lesson in a series of 2 which have been designed to cover point 7.1.1 of the AQA GCSE Chemistry & Combined Science specifications. The students were introduced to crude oil and hydrocarbons in the previous lesson so this one begins by introducing the fact that most of the hydrocarbons in crude oil are alkanes. The students are challenged to recall that covalent bonds will hold hydrogen and carbon together and they will learn that every carbon atom has four covalent bonds. This fact is used in the step by step guide as they are shown how to draw the displayed formula for methane. Moving forwards, a quick competition is used to introduce the next three members of the group in ethane, propane and butane, and the students have to apply their understanding by drawing the formula to find the molecular formula. The general formula for the alkanes is determined and then a series of exam questions will challenge them to apply this to work out numbers of carbon or hydrogen atoms or to write a formula.

This lesson describes the size and mass of atoms and describes the relative mass and electrical charge of the subatomic particles. The PowerPoint and accompanying resources are part of the first lesson in a series of 3 that has been designed to cover specification points 1.1.4 - 1.1.6 of the AQA GCSE Chemistry & Combined Science specifications. The lesson begins by introducing giga as a prefix of size and this leads into a task where the students have to order the other prefixes from largest to smallest. This introduces the nanometre and students will learn the size of the radius of an atom is 0.1nm. Time is taken to compare this size against that of a football and a human egg cell to try to put this atom radius into context. Moving forwards, the term “subatomic particles” is introduced and the students are challenged to recall the names of the three types along with their location within the atom from their lessons on the development of the atomic model earlier in topic 1. They are told that most of atom’s mass is in the nucleus and therefore can work out the protons and neutrons have much higher relative masses than electrons. They will also learn the relative electrical charges of the particles and are challenged to use this to state the overall charge of an atom and the nucleus. There is a considerable amount of Maths written into this lesson including the use of standard form and conversion between units and step by step guides are used to support the students with this work

This lesson describes the meaning of an isotope and explains how to calculate the relative atomic mass using the relative masses and abundance of its isotopes. The PowerPoint and accompanying resources are part of the final lesson in a series of 3 lessons have been designed to cover the detail of points 1.1.4, 1.1.5 & 1.1.6 of the AQA GCSE Chemistry & Combined Science specifications. The early topic 1 lessons covered the meaning of the atomic and mass number and the calculation of the number of subatomic particles, and this lesson begins by challenging the recall of this key information. Moving forwards, a quick quiz competition is used to introduce the term “isotope” and then the students have to calculate the number of subatomic particles in K-39, K-40 and K-41 before using their answers to complete a definition about these types of substances. Time is taken to explain how isotopes are represented in standard annotation and the importance of the mass number is emphasised. A series of application questions are used to challenge them to apply their understanding and knowledge and mark schemes are embedded into the PowerPoint to allow the students to self-mark. The remainder of the lesson explains how the existence of isotopes results in some elements having relative atomic masses that are not whole numbers and then explains how these masses can be calculated. Once an example is demonstrated, the students are again given the chance to apply their understanding to a series of questions, and this exam question worksheet has been differentiated two ways

This lesson explains how to calculate the number of protons, neutrons and electrons in atoms and ions when given the atomic and mass numbers. The PowerPoint and accompanying resources are part of the second lesson in a series of 3 lessons which have been designed to cover the content of specification points 1.1.4, 1.1.5 & 1.1.6 of the AQA GCSE Chemistry and Combined Science specifications. The lesson begins by challenging the students to put the chemical symbols for astatine, oxygen, iodine and carbon together to form the word atomic. Time is taken to explain the meaning of the atomic number and to emphasise how the number of protons in the nucleus is unique to atoms of that element. The students will learn that as the number of electrons is always the same as the number of protons in an atom, the atomic number can be used to calculate the numbers of both of these particles. Moving forwards, the mass number is considered and having been given the number of neutrons in a lithium atom, the students are challenged to articulate how the mass number and atomic number were used in this calculation. A series of worked examples are done as a class before the students are given the opportunity to challenge their understanding The remainder of the lesson focuses on ions and how the number of protons, neutrons and electrons are calculated in these substances. Initially, the students are challenged to use their knowledge of the charge of an atom to deduce that ions must have differing numbers of protons and electrons. The standard annotation for ions are introduced and explained and a series of exam questions are then used to check understanding. Mark schemes for each of these final questions is embedded into the PowerPoint and the worksheet has been differentiated two ways

This lesson describes the meaning of the atomic and mass number and explains how to calculate the number of protons, neutrons and electrons. The PowerPoint has been designed to cover the detail of points 1.4, 1.7, 1.8 and 1.10 of the Edexcel GCSE Chemistry and Combined Science specifications. The lesson begins by challenging the students to put the chemical symbols for astatine, oxygen, iodine and carbon together to form the word atomic. Time is taken to explain the meaning of the atomic number and to emphasise how the number of protons in the nucleus is unique to atoms of that element. The students will learn that as the number of electrons is always the same as the number of protons in an atom, the atomic number can be used to calculate the numbers of both of these particles. Moving forwards, the mass number is considered and having been given the number of neutrons in a lithium atom, the students are challenged to articulate how the mass number and atomic number were used in this calculation. A series of worked examples are done as a class before the students are given the opportunity to challenge their understanding.

This lesson describes the meaning of an isotope and explains how to calculate the relative atomic mass using the relative masses and abundance of its isotopes. The PowerPoint and accompanying resources have been designed to cover the detail of points 1.9, 1.11 & 1.12 of the Edexcel GCSE Chemistry & Combined Science specifications. The early topic 1 lessons covered the meaning of the atomic and mass number and the calculation of the number of subatomic particles, and this lesson begins by challenging the recall of this key information. Moving forwards, a quick quiz competition is used to introduce the term “isotope” and then the students have to calculate the number of subatomic particles in K-39, K-40 and K-41 before using their answers to complete a definition about these types of substances. Time is taken to explain how isotopes are represented in standard annotation and the importance of the mass number is emphasised. A series of application questions are used to challenge them to apply their understanding and knowledge and mark schemes are embedded into the PowerPoint to allow the students to self-mark. The remainder of the lesson explains how the existence of isotopes results in some elements having relative atomic masses that are not whole numbers and then explains how these masses can be calculated. Once an example is demonstrated, the students are again given the chance to apply their understanding to a series of questions, and this exam question worksheet has been differentiated two ways

This lesson describes the reactants and products of the Haber Process and then explores and explains why the specific conditions are chosen for this reaction. The PowerPoint and accompanying worksheets have been designed to cover specification point 10.4.1 of the AQA GCSE Chemistry specification. The summary passage which is completed at the end of the lesson has been differentiated two ways. The lesson begins by challenging the students to use a description of the reaction to complete the balanced symbol equation. A quiz competition involving both Chemistry and Maths skills is used to reveal the temperature and pressure which are chosen for this reaction. Students will learn that this only produces a yield of 30% and therefore are encouraged to question why these conditions are chosen. In doing so, they are made to wear two “hats”, so that they consider it from both a Science angle but also a business angle. Their knowledge of reversible reactions and the effect of changing either the temperature or the pressure on the position of the equilibrium are constantly challenged and then checked through a range of progress check questions. As a result of this lesson, students will understand that these conditions are a compromise and be able to explain why.

This lesson explains the properties of typical covalent simple molecular compounds and introduces diamond and graphite as giant substances. The lesson PowerPoint and accompanying resource have been primarily designed to cover point 1.34 of the Edexcel GCSE Chemistry & Combined Science specifications but also links to points 1.35 - 1.37 where the structure and uses of the giant covalent substances are described. The lesson begins with a quick recap task where students have to recognise a covalent bond from a description and fill the missing part. Moving forwards, they are introduced to the fact that covalent molecules can be simple or giant. They are then presented with a table showing some properties of covalent molecules and having to group them as simple or giant in the short space of time that the table remains displayed on the board. This task challenges their observational skills, something which will again be tested later in the lesson as they study the structure of graphite and diamond. Time is taken to ensure that key details such as the strong covalent bonds in both sets of molecules is understood and that it is the weak intermolecular forces which are actually responsible for the low melting and boiling points. The last part of the lesson introduces diamond and graphite as allotropes of carbon and students will briefly learn why one of these conducts electricity whilst the other doesn’t. If you want a lesson about these allotropes in more detail, then please look for “Diamond and Graphite”. Progress checks have been written into the lesson at regular intervals so that students are constantly assessing their understanding and so misconceptions are quickly identified.

This lesson describes the relationship between the structure and function of the giant covalent substances, graphite and diamond. The PowerPoint and accompanying resource have been designed to cover points 1.35, 1.36 and 1.37 of the Edexcel GCSE Chemistry specification also covers those same points in the Chemistry section of the Combined Science course As shown in the picture, the lesson begins with a newspaper story about two prisoners who escaped from Pentonville prison by using a diamond-tipped drill and this immediately introduces the use of this allotrope of carbon in cutting tools. There is a clear focus on the link between the structure, bonding and respective uses. Time is taken to focus on the comparison between graphite and diamond in terms of their ability to conduct electricity. A step by step answer is used to explain why diamond cannot conduct electricity so that students can use this when forming their answer for graphite.

This lesson explains the properties of the fullerenes and focuses on graphene in terms of its structure and bonding. The PowerPoint and the accompanying resources have been designed to cover point 1.38 of the Edexcel GCSE Chemistry specification and also covers that same point on the Combined Science course. The lesson begins by recalling the definition of an allotrope. The students are then introduced to graphene and will begin to understand how this covalent structure is related to graphite and will know the shared properties of these two materials. Time is taken to ensure that students can explain why graphene is able to conduct electricity. Moving forwards, students will meet the family of allotropes known as the fullerenes and will learn some important details about a few of these including C60

This lesson describes the differing properties of metals and non-metals and also relates this to their position in the Periodic Table. The lesson PowerPoint has been designed to cover points 1.18, 1.40 & 1.42 of the Edexcel GCSE Chemistry specification and this also covers those same points on the Combined Science course. The lesson contains a range of tasks including guided discussion points and quick quiz competitions which will engage and motivate the students whilst introducing key properties such as malleability and the ability to conduct electricity. Time is also taken to consider where the metallic and non-metallic elements are found in the Periodic Table and a series of progress checks will challenge the students to link together properties with position.

This lesson describes how the limiting reactant controls the mass of the product formed and explains how to deduce the stoichiometry. The PowerPoint and accompanying worksheet, which is differentiated, have been designed to cover points 1.52 & 1.53 of the Edexcel GCSE Chemistry specification and also covers those points in the Chemistry section of the Combined Science course. Step by step guides are used to go through worked examples so students are able to visualise how to set out their work. The lesson begins with a fun analogy involving sausages and potatoes so that students can identify that the potatoes limited the sale of food. Alongside this, students will learn the key term excess. Some time is then taken to ensure that students can spot the limiting reactant and the one in excess in actual chemical reactions and method descriptions. Moving forwards, students will be guided through two calculations that involve limiting reactants - those to calculate the theoretical yield and the other to calculate a balanced symbol equation. Other skills involved in these calculations such as calculating the relative formula mass are recalled and a few examples given to ensure they are confident. The question worksheet has been differentiated two ways so that any students who need extra assistance can still access the learning.

This lesson describes meaning of the mole and shows how this measurement is used in a range of calculations. The clear lesson PowerPoint presentation and accompanying question worksheet have been designed to cover points 1.50 & 1.51 of the Edexcel GCSE Chemistry specification and also covers those points in the Chemistry section of the Combined Science course. This lesson has been specifically written to explain the concept in a concise manner so that the key details are understood and embedded. Students are shown how to recognise when a mole calculation requires them to use Avogadro’s constant and when they should the formula including the relative formula mass.

This fully-resourced lesson describes how to calculate the concentration of solution in grams per decimetres cubed and mol per decimetre cubed. The lesson PowerPoint and accompanying questions which are differentiated have been designed to cover points 1.49 & 5.8 of the Edexcel GCSE Chemistry specification. The lesson begins by introducing students to volumes in decimetres cubed and time is taken to ensure that students are able to convert to this measurement from volumes in centimetres cubed. Moving forwards, students are shown how to calculate the concentration in both units through the use of worked examples and then they are challenged to apply this to a series of exam-style questions which have been differentiated so students of differing abilities can access the work