A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A detailed, engaging and informative lesson presentation (50 slides) and accompanying worksheets that looks at the commonly misunderstood topic of chromatography. This lesson goes through paper, thin-layer and gas chromatography so that students can analyse and interpret the results that would be found on a chromatogram. The lesson begins by challenging the students to recall details of this separation method when they met it at KS3. Students will meet the two chemical phases, mobile and stationary, and begin to understand that this method relies on the distribution of substances between these two phases. Students will meet the calculation for retention factor and be shown how to tackle questions on this topic before trying themselves. Time is taken to go over the details of gas chromatography, in a step by step guide format, as this is a poorly understood topic. There are progress checks throughout the lesson, which include mark schemes and detailed explanations, so that students can assess their understanding and address any misconceptions that could arise.
This lesson has been written for GCSE students but could be used with A-level students
A fun and engaging lesson presentation (74 slides) and accompanying differentiated worksheets that uses exam questions with displayed mark schemes and competitions to enable students to assess their understanding of Module C4 (Predicting and identifying reactions and products). The following topics within the combined Science specification are covered by the tasks:
C4.1 Predicting chemical reactions
Group 1 - the alkali metals
Group 7 - the halogens
Halogen displacement reactions
Group 0 - the noble gases
Reactivity of elements
C4.2 Identifying the products of chemical reactions
Detecting gases
Students will be able to use the understanding checks to see which areas of the specification need more attention
A detailed and engaging lesson presentation (43 slides) and accompanying worksheets that introduces students to the disease, Diabetes (mellitus), and focusses on the similarities and differences between types I and II. The lesson begins by challenging the students mathematically to get the answers 1 and 2 and then to see whether they can link these numbers to a disease. A variety of tasks, which includes competitions and progress checks, are used to get the students to recognise the differences and state which of the types they belong to.
This lesson has been designed for GCSE students and can be used with higher level students. However, a lesson more appropriate for A-level Biology students is named “Diabetes Mellitus Type I and II” and is available in my resources
An engaging lesson presentation (41 slides) and accompanying worksheet that looks at the different causes of variation and the different types of variation. The lesson begins by challenging the students to pick out a set of siblings from a series of pictures and then getting them to explain scientifically why they made the decision that they did. Moving forwards, students will recognise that one cause of variation is genes. Students are shown a pair of identical twins and asked to explain why they look different despite their identical genes so that they can understand that the environment also affects variation. Students will also meet discontinuous and continuous variation and will understand how this data should be represented. There are progress checks throughout the lesson to allow the students to assess their understanding.
This lesson has been designed for KS3 and GCSE students.
A detailed and engaging lesson presentation (52 slides) and accompanying worksheet that looks at competition between organisms and the different types of relationships that exist as a result of this interaction. The lesson begins by looking at the meaning of the biological term, "competition", and then introduces this when it occurs between the same species and different species. Students are challenged to consider the different resources that animals compete for before an activity based competition is used to get them to recognise how this competition can cause changes to the population size.
Moving forwards, students will meet the three main types of ecological relationship and look at them in greater detail, with predation being a main focus.
There are regular progress checks throughout the lesson (with displayed answers) so that students can assess their understanding.
This lesson has been designed for GCSE students but can be used with more-able KS3 students who are looking at ecosystems and the relationships that exist within them
An engaging and detailed lesson presentation (48 slides) and associated game that goes through the topic of ecosystems, making sure that the numerous key words are recognised and understood and ensures that students know the difference between biotic and abiotic factors. A game of keyword bingo runs throughout the lesson to act as a motivation and to make sure that the students keep track of all of the important terminology. Time is taken after some of the important words to go into depth so that the Biology is fully understood. Students will learn the difference between biotic and abiotic factors and then will carry out a number of tasks to explain how the abiotic factors can affect the community. There are regular progress checks throughout the lesson so that students can assess their understanding.
This lesson was designed for GCSE students but can also be used with KS3 and also as a recap with A level students
A concise lesson presentation (16 slides) and associated worksheet that looks at the motion topic of Momentum and guides students through how to answer these questions. The lesson begins by giving the students the units for momentum and challenging them to use this to work out the other factors involved in the equation. Moving forwards, a number of progress checks are used to see whether the students can apply their new found knowledge. All progress checks have displayed mark schemes.
This lesson has been designed for GCSE students and ties in nicely with my other resources, "Conservation of momentum" and "Changes in momentum"
A fun and highly engaging lesson presentation (37 slides) and associated worksheets that combines exam questions and progress checks along with competition rounds to enable students to assess their understanding of the specification content within units B1 - 3 of the OCR Gateway A 9 - 1 GCSE Science.
All of the exam questions and progress checks have displayed answers as well as sections where content is recapped so that students can understand how an answer was obtained.
The revision rounds in the competition include “Blockbusters”, “Doctor, Doctor” and “Crack the CODE”.
This lesson has been designed for GCSE students.
This is a detailed and engaging lesson presentation (59 slides) that combines exam questions and progress checks along with quiz competition rounds to enable students to assess their understanding of the specification content within topics C1 - 3 of the OCR GCSE Combined Science Gateway A 9 - 1 as can be assessed in Paper 3.
All of the exam questions and progress checks have displayed answers as well as sections where content is recapped so that students can understand how an answer was obtained.
The revision rounds in the competition include “The need to BALANCE”, “Number crazy” and “React to the REACTION”.
This lesson has been designed for GCSE students.
A detailed lesson presentation (37 slides) and associated worksheets that looks at the different pieces of evidence that scientists use to support evolution and discusses how these support the theory. The lesson begins by challenging students to decide which piece of evidence is the key piece in supporting evolution (fossils). Students will then have to arrange a number of statements to describe how a fossil is formed. Students are introduced to the fossil record and questions are used to check that they understand where the oldest fossils would be found. Moving forwards, students are given three pieces of evidence that would be observed in the fossil record and they are challenged to explain how each of these supports the theory of evolution. Quick competitions are then used to get the students to see some extinct organisms in the Dodo and Woolly Mammoth and again they are questioned on how extinct animals support the theory of evolution. Further evidence in rapid changes in species and molecular comparison is discussed. There are regular progress checks throughout the lesson so that students can assess their understanding and there is a set homework included.
A fun and engaging lesson presentation (90 slides) and associated worksheets that uses exam questions, quick tasks and quiz competitions to allow students to assess their understanding of the topic of transport in plants, which is module 3.1.3 on the OCR A-Level Biology A specification. Competition rounds include “Keyword BINGO”, “Crack the Code” and “Make the Link” and students will enjoy being able to identify areas that require further attention. All exam questions have mark schemes.
This lesson is designed for A-level students
A concise lesson presentation (19 slides) and associated worksheet (newspaper articles) that introduces students to the process of homeostasis in the human body and the three main factors (water potential, blood glucose, temperature) that are controlled by this system. The lesson begins by getting the students to work out a code to give them an exemplary definition for homeostasis. A newspaper article is used to get the students to recognise the three factors that are controlled. A quick competition is used to show the students the main parts of any homeostatic control system.
This lesson is designed for GCSE students but could be used with both KS3 and A-level as a quick recap
This clear and concise lesson explains how the inheritance of two or more genes that have loci on the same autosome demonstrates autosomal linkage. The engaging PowerPoint and associated resource have been designed to cover the part of point 6.1.2 (b[ii]) of the OCR A-level Biology A specification which states that students should be able to demonstrate and apply their knowledge and understanding of the use of phenotypic ratios to identify autosomal linkage.
This is a topic which can cause confusion for students so time was taken in the design to split the concept into small chunks. There is a clear focus on how the number of original phenotypes and recombinants can be used to determine linkage and suggest how the loci of the two genes compare. Important links to other topics such as crossing over in meiosis are made to enable students to understand how the random formation of the chiasma determines whether new phenotypes will be seen in the offspring or not. Linkage is an important cause of variation and the difference between observed and expected results and this is emphasised on a number of occasions. The main task of the lesson acts as an understanding check where students are challenged to analyse a set of results involving the inheritance of the ABO blood group gene and the nail-patella syndrome gene to determine whether they have loci on the same chromosome and if so, how close their loci would appear to be.
This lesson has been written to tie in with the other lessons from module 6.1.2 (Patterns of Inheritance)
A fun, engaging and detailed lesson presentation (29 slides) on the properties of metals and non-metals. This lesson focuses on the key properties and their key terms such as malleable and ductile. A number of quick competitions are used to introduce these terms to the students and once provided with the definitions, the students are expected to put these properties correctly with the metals (or non-metals). Progress checks occur throughout the lesson so that the understanding of the students can be checked.
This lesson is designed for both KS3 and GCSE students.
A highly detailed set of 2 lessons (35 slides) on the topic of rearranging the formula. Over the course of the two lessons, they build up gradually with a culmination of some of the more difficult questions on this topic met at GCSE. Students are reminded of the meaning of the "subject of the formula" and then introduced to inverse operations. Students are guided through the simple questions involving one move to rearrange before looking at two moves and then questions which involve indices and square roots. The second lesson looks at the hardest questions, involving additional Mathematical skills such as factorising.
Progress checks are constant throughout the two lessons so that any misconceptions can be quickly addressed.
These lessons were designed for students studying GCSE but can be used with KS3 students appropriately too
A detailed lesson presentation (25 slides) that introduces students to the difficult topic of specific heat capacity. Students are guided through the equation for energy transferred and shown how to rearrange the equation, so they are able to tackle the question, no matter the subject of the question. There are regular opportunities for students to apply their new found knowledge to questions and to assess themselves against the answers. Quick games and competitions are also used to maintain engagement.
If you choose to download this lesson, it would be much appreciated if you would take just a few seconds to write a review so I can improve my practice and other teachers can see if this resource is right for them. Thank you in advance.