This is a lesson aimed at the new OCR GCSE Gateway Science B1 - ‘Cell-level systems’ SoW. The lesson begins by identifying examples of prokaryotic and eukaryotic cells, pupils can begin to think about the structural differences between these two types of cells. Next, pupils are given a worksheet plus an additional card of information on either the structure or function of a bacteria cell. Pupils will need to walk around the room and trade the information on their card with others to fully complete a labelled diagram of a bacteria cell and descriptions of the functions for each structure. Once completed pupils can peer or self-assess their work using the information within the PowerPoint slide. The next activity requires pupils to apply their knowledge of the structure of bacteria (prokaryotic) cells and compare this to the structure of eukaryotic cells, pupils need to construct a list/table in their books to identify the similarities and differences between these two cells. Pupils can then self-assess their work against the list provided in the PowerPoint slide. The next activity is an assessment activity, pupils will need to complete the past-paper question in their books and again self/peer-assess their work using red pens. The final activity involves a list of ‘True/False’ statements, to gauge the progress of the class this could be completed by students holding up red/amber/green cards to identify whether they think the statement is true or false. All resources are included in the PowerPoint presentation, please review to provide me with feedback :). Thank you.

This is a lesson designed to meet specification points for the new OCR GCSE (Gateway Science) Biology B1 - ‘Cell-level systems’ SoW. For more resources please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by pupils completing a comprehension task, they will need to read details on the history of the microscope and answer questions into their books. Once finished pupils will need to then self-assess their work using the answers provided in the PowerPoint presentation. The next part of the lesson focuses on the structure of a light microscope, and how to use it to view a specimen, including different ways in which stains can be used in light microscopy. Students will watch a video, and will need to answer questions in their books, before self-assessing their work. Pupils are then introduced to the idea of ‘resolution’ - the definition for which they need to know so pupils could write this down in their books. The next part of the lesson will focus more on maths skills related to microscopy, pupils will firstly need to calculate the overall magnification of a microscope using the objective lens and eyepiece lens magnifications. The next skill pupils will learn is to change units of measurement from cm > mm > um > nm. The next calculation pupils will need to know is how to calculate the actual size of a specimen being observed down a microscope. Pupils will be introduced to the calculation and then given a couple of example questions, pupils can attempt to have a go at these themselves. The following slide goes through step-by-step how you would calculate the answers to these questions. The plenary is a ‘Silent 5’ task where pupils will need to answer questions based upon what they have learnt during the lesson.

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. Students are firstly given the definition of a joint and are then asked to move around a bit, either in their seats or around the room, and whilst moving they should think about their joints - whether they are all the same, if they move in the same way or not. This leads into an introduction to three types of joint that they need to learn about - ball-and-socket joint, hinge joint and fixed joint. The next part of the lesson will focus on the tissues which comprise a joint - namely tendons, ligaments and cartilage. Students will be given information sheets, either on their table or placed around the room. Using this information they will need to complete a summary table of the three tissues - the location of the tissue (what it is connected to), a description of the tissue and it’s role in the joint. Once students have completed this task they can self-assess their work using the mark scheme provided. Next, students will conduct an investigation into muscle strength. Students will work in pairs, following the method provided on the PowerPoint to measure the strength of their triceps, biceps and forearm using a Newton Scale. Their results should be recorded in a suitable table. Lastly, students are given a worksheet to summarise what they have learned on this topic so far. They will need to complete the sentences with the correct key word, this word can then be found within the word search. The mark scheme for this task is also included so students can mark and correct their work. The plenary provides two choices for students, either unscramble the anagrams of key words from the lesson or using the key word selection provided, write a summary of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW OCR GCSE (Gateway) Biology ‘Cell-level systems’ SoW. For more lessons designed to meet specification points for the NEW GCSE specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with an introduction of the process of aerobic respiration including the word equations that pupils will need to learn. Next is a video, pupils will need to answer questions whilst watching the video, once it is finished they can self-assess their work using the mark scheme provided. Pupils are then introduced to the idea that aerobic respiration is exothermic and look specifically at the ultra-structure of the cell and which parts are important for respiration, this activity is a match up activity that pupils can complete and then mark. A mid-plenary is a true or false task and the final activity is a levelled worksheet pupils will complete using information cards on how animal and plant organisms use the energy released by respiration. Once finished they can self-assess using the mark scheme on the PowerPoint slides. Pupils have a choice of two activities to complete for their plenary - either an anagram challenge or a summary sentence using a list of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson designed to meet specification points for the new OCR GCSE (Gateway) Biology 'Cell-level lsystems’ scheme of work. The lesson begins by pupils being introduced to the term ‘photosynthesis’ and then being asked to consider the raw materials that plants need in order for photosynthesis to occur. Pupils are then given three minutes to write down everything they have learnt about photosynthesis so far, with an extension task to write the word equation for the reaction. In the next part of the lesson pupils are introduced to the word equations and are challenged to write a balanced symbol equation for this reaction. Mid-lesson plenary involves a set of exam-questions (total marks = 9 marks) which they can complete in silence and then peer or self-assess using the mark scheme provided. Pupils are then introduced to the concept of endothermic and exothermic reactions, they are given the definition for an endothermic reaction and are then asked to ‘think, pair, share’ with a partner about what an exothermic reaction might be and whether photosynthesis is endothermic or exothermic. After 5 minutes, pupils are given the answers and they can mark their work. The final activity is for pupils to think about the structure of the leaf, and how it is adapted for its function of photosynthesis. Students will watch a video about these various adaptations, and will need to answer a set of questions whilst watching. This task can then be self-assessed using the answers provided in the PowerPoint presentation. Pupils can choose their plenary activity - either writing quiz questions on the topic of the lesson or summarising what they learnt by writing a twitter message along with #keywords. All resources are included in the PowerPoint presentation, thank you for purchasing :)

This lesson is designed for the NEW OCR GCSE (Gateway) Biology, ‘Cell-level systems’ SoW. For more lessons designed to meet specification points for the NEW GCSE specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Firstly pupils are asked to consider why organisms may not be able to continuously carry out aerobic respiration. They can discuss in pairs and then as a class and be introduced to the idea of anaerobic respiration. They will fill then complete a fill-in-the-blank task to sum up this process. Pupils will then watch a video where they will answer questions about anaerobic respiration, their answers can be checked against the mark scheme provided. Now pupils are introduced to the idea of oxygen debt, they are given an information card in pairs (for lower ability classes you may want to tag read this as a class) and then pupils will need to answer questions about this information. They can talk about in partners, once finished they can self or peer assess their work. Finally the different products of anaerobic respiration that are made in different organisms are highlighted, it is touched upon in the video but this is clear slide to show anaerobic respiration in plants, bacteria and yeast. Pupils will complete some exam-style questions to assess their knowledge of this topic, can be answered in the back of their books to fully test them! Pupils can then mark their own work using the mark scheme provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Bioenergetics’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will learn about the products made during photosynthesis and how these are used plants. In particular the uses of protein, cellulose, starch and fats & oils. At a higher level pupils will consider the advantages and disadvantages of energy storage molecules such as fats, oils & starch. Pupils will have an opportunity to use information points around the room to complete a levelled worksheet on this topic which will be peer assessed at the end of the lesson. Extension opportunities are available if finished. Once this first activity has been self or peer assessed pupils will then have the opportunity to conduct an experiment to investigate the presence of starch in normal and variegated leaves. The last activity pupils will complete are two exam-style questions on the topic of the lesson, this can then be self-assessed. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

A PowerPoint and worksheet aimed at the NEW AQA Trilogy GCSE specification, designed for the 'Organisation' SoW. This is a lesson I used in an Ofsted inspection which received an 'Outstanding' grading. For more lessons designed for the NEW AQA TRilogy Biology, Chemistry and Physics specification please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students will recap on the digestive system from previous lessons on tissues and organs and then go on to look at the role of digestive enzymes within the digestive system. Pupils will use posters to answer levelled questions on a worksheet, there is a mini-plenary in the middle of the lesson to regroup and show progress then a final self or peer-assessment of the work completed throughout the lesson. The worksheet resource has three versions, each version contains information on a different digestive enzyme. Students can therefore use each other to compete the table on the first page of the worksheet. The extension sheet and the mini-plenary resources are found at the end of the PowerPoint.

This resource is for the NEW AQA GCSE specification on preventing infections, it meets specification points within the 'Infection & Response' module. This resource includes a PowerPoint presentation and all the resources needed for the lesson. This lesson is part of a 12 lesson bundle for the NEW 'Infection & Response' Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by pupils considering what a communicable disease is, the differences between bacteria and viruses and the mechanisms by which these pathogens spread disease. The next part will be a brief introduction to the work of Ignaz Semmelweis, Joseph Lister and Louis Pasteur and how they have improved our knowledge of pathogens and contributed to the development of methods to stop the spread of infection. Pupils will then focus on the work of Ignaz Semmelweis by writing out some sentence starters, watching a video on his work in hospitals in order to finish the sentences off. Pupils can then assess their work using red pens. The next activity pupils will need to read some information on different disease prevention methods and will need to copy and complete the table shown on the PowerPoint slide. This could be achieved using a circus activity, whereby poster so the information are made and placed around the room for pupils to access. Finally, pupils will then consider some data on the board and use this to explain the difference between a pandemic and an epidemic. All of the resources you need for this lesson are included on the PowerPoint slide, there is also an additional resource of a newspaper article activity on Semmelweis which could be used as a homework activity.

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction of food chains, pupils are asked to watch a video and answer a set of questions. Once complete pupils can self-assess their work. The next part of the lesson teaches students about trophic levels, firstly there is a diagram demonstrating the meaning of terms such as ‘producer’ and ‘primary consumer’ and how these correspond to trophic levels. Pupils can then have a go at matching the correct trophic level to the correct title, definition and example. Once complete pupils will self-assess their work using the mark scheme provided. Students can now have a go at constructing their own food chain or food web using a set of animals cards, once arranged they should write the order in their books and correctly level the trophic levels and whether the organism is a producer, a primary, secondary or tertiary consumer. The next part of the lesson focuses on biomass, firstly a definition is given to students and then they will need to watch a video on biomass and answer a set of questions. Once this task is complete they will be able to mark their work against the answers provided. The last task is for pupils to complete a worksheet on biomass, the answers can be written into their books and either peer r self-assessed once complete. The plenary task is for pupils to turn to the back of their books and write a detailed description of the flow of energy & changing biomass through a food chain using a selection of key words as prompts. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to adolescence and puberty, students will be given a card of information which will read as a class before students answer a set of questions. Once this task is complete, students can self-assess their work using the answers provided. Next, students should discuss with their partner the physical changes that could occur to a boy and girl during puberty, their ideas should be noted down as a mind map in their books. Their work can then be checked and corrected using the mark scheme provided. Students will now be given a set of cards describing physical changes which occur in either boys or girls or both, students will need to cut the cards out and stick them into a table in their books. The mark scheme for this task is included for students to self-assess their work. Lastly, students are introduced to the idea of sex hormones which are what cause the changes that occur in boys and girls during puberty. After this, students will be given a set of levelled questions which they should either complete at the back of their books (higher ability) or use their notes from the lesson (lower/middle ability). The plenary task requires students to summarise what they have learned this lesson in three sentences, using as many key words as possible. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with some facts and figures about the rates of smoking around the world, how many cigarettes are smoked daily and the different chemicals found in cigarette smoke and which of these are linked with disease. Students will now watch a video on the chemicals found in cigarette smoke and the damage these chemicals can do to the body, whilst watching the video students will need to answer a couple of questions. The answers to these questions are then revealed using the PowerPoint, students can self-assess their work. Students will now watch another video on smoking and the effect on your health, students will be given a set of questions that they will need to answer using the video. Once this task is complete, students will self-assess their work using the mark scheme provided. The latter part of the lesson involves an activity whereby students will be given a worksheet of questions, there will be information posters placed around the room which students will need to use to answer questions on their worksheet. The mark scheme for this task is included in the PowerPoint presentation for students to peer-assess their work with their partners. The last task is for partners to complete a ‘feedback quadrant’ of their partners work, this includes a positive comment, something they missed out which should have included and a question to test their understanding of the lesson content. The plenary activity requires students to complete a 3-3-1 reduction - 3 facts, 3 key words and then reduce this to 1 key word from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a recap on the stages involved in fertilisation, students will be asked to rearrange a set of sentences into the correct order to correctly describe the process of fertilisation. Seed dispersal is now introduced, firstly students are asked to consider two questions - why the parent plant wants to disperse seeds away from itself and what are the main methods of seed dispersal that we already know of. Students can discuss the answers to these questions in pairs before feeding back into a class discussion, the answers to these questions can then be revealed. Next, students will be given a worksheet of questions and will then watch a video on various methods of seed dispersal. Students will need to answer the questions whilst watching the video, the mark scheme for this task is included in the PowerPoint for students to self-assess their work once it is complete. The last task is a progress check, whereby students will need to copy and complete a paragraph which describes the importance of seed dispersal. Students can either peer-assess or self-assess their work using the answers provided once this is complete. The plenary requires students to create three quiz questions to test their peers knowledge of what they have learned so far this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson which meets specification points within the AQA Biology Trilogy - Cells SoW. The lesson begins by pupils using posters around the room to complete a levelled worksheet on the structure and function of animal and plant cells. Pupils will then peer-assess their work, providing feedback of the grade each pupil achieved and ways to improve their work. Pupils will then complete a 'revision' task in the back of their books, they will need to stick in a sheet and match the structure to the function. Pupils can self-assess their work. The final task, an assessment task, involves pupils answering a past-paper questions. They should try and do this with their book closed to test their knowledge of what they have learnt this lesson. Pupil can then either peer-assess or self-assess their work. All resources are included, please review with any feedback :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by students discussing what they think the waste products of the body are, they can write down their ideas into their books as a mind map. As an extension pupils can consider which processes within the body actually release these waste products. The lesson then moves on to identify carbon dioxide and urea as the two major waste products of the body, pupils will then be given a levelled worksheet which they can complete by using information posters either placed around the room or placed on their desks. After pupils have completed this worksheet, they can self or peer assess their work using the mark scheme provided. The next task is an exam-style question on the work the pupils have just completed, higher ability pupils can challenge themselves by completing these questions in the back of their books and not looking at their notes. Once finished pupils can mark their work using the mark scheme provided in the PowerPoint slide. The plenary task is an anagram challenge, pupils will need to unscramble 6 words to reveal 6 key words used within the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the levels of organisation found within multicellular organisms. Students are then asked to sort the following into the correct order, according to size: cell, organ system, tissue and organ. Students are then shown the definitions for each of the following: cells, tissues and organs before being asked to complete a mind map of organ systems they alread know of. After spending a few minutes on this task, some of the example answers can be revealed for pupils to mark their work. Students are now given a list of organs and are asked to pick the organs which belong to the digestive system, respiratory system and water transport system of plants. Once this task has been completed, students can self-assess their work using the mark scheme provided. The next activity requires students to match the correct organ system name to the correct role of that organ system and then pupils need to complete a fill-in-the-blank task, the answers to both these tasks are included in the PowerPoint for students to self-assess their work. Lastly, students are given a card sort containing organs/cells/tissues - students will need to match the correct cell to the correct tissue and then organ, this can be stuck into a table in their books. This work can then be self-assessed using the mark scheme provided. Students will finally complete a ‘Team Poster Challenge’ to end the lesson. The plenary requires to spend one minute talking to the person next to them about what they have learned this lesson! All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.2 Module on ‘Structure & Function of Body Systems’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a recap of the key terms learned over the last few lessons on the topics of the skeleton and joints, students need to match the structure to the correct function. This work can then be self-assessed using the answers provided. Next, students will need to discuss the body muscle groups they already know of with their partner and then create a mind map of their ideas in their books. Students can then check their work against the answers revealed on the PowerPoint. The next activity requires students to correctly label the diagram of the human body with the muscle groups and then identify the function of each muscle group from a list provided. The mark scheme for this task is included for students to mark and correct their work. The next part of the lesson focuses on the antagonistic pairs of muscle. Students are shown a diagram of how biceps and triceps work together to either move the forearm upwards to downwards. After viewing the diagram and the explanation, students are asked to complete a fill-in-the-blank task to summarise this process. Their answers can be self-assessed using the PowerPoint presentation. Lastly, students will complete a progress check in their books - this is a set of questions based upon what they have learned this lesson. This task can be self or peer assessed using the mark scheme provided. The plenary task requires students to write three quiz questions to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the menstrual cycle and the definition of a period. This leads into a video on the menstrual cycle, students will be given a worksheet of questions which they will need to answer whilst watching the video. This work can be self-assessed using the answers provided on the PowerPoint. Next, students need to understand what is happening on different days of the menstrual cycle. They will watch another video, using this they need to outline the events which occur on Day 1, Day 14, Days 7-28 of the menstrual cycle. Once complete, students can mark and correct their work using the mark scheme provided. The next part of the lesson focuses on contraception, firstly students will be given a card of information about contraception - condoms and the contraceptive pill. Students will need to read the information and answer a set of questions, this work can be assessed using the mark scheme provided once complete. The last task is an assessment task, to check students understanding of key terms learned over the last few lessons on reproduction. Students will need to match the correct term to the correct definition, this work can assessed using the answers provided. The plenary task requires students to write a Whatsapp message to their friend, explaining what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.2 Ecosystem Processes. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with two images, both of ecosystems, students are then asked to discuss their ideas of what the definition of an ecosystem could be. The answer is then revealed so students can check their answers and correct if necessary. Students are now given a list of key words, whilst watching a video on ecology students should try to write a definition for each of these key words. This task can be self-assessed using the mark scheme provided once complete. Next, students are shown images of three different species of woodpecker - Green Woodpecker, Greater Spotted Woodpecker and the Lesser Spotted Woodpecker. Students can each be given a woodpecker name, they then need to come up with a survival strategy - how will they survive in the same habitat as each other? The ideas from the classroom can be noted down on the board for everyone to see. The PowerPoint can then reveal that each of the woodpeckers feeds in a different part of the woodland ecosystem. This leads into the definition of an ecological niche - as a particular place or role that an organism has within the ecosystem. The next activity requires students to watch a video on ecological niches of organisms living in a watering hole ecosystem, students will need to note down the niches they observe whilst watching the video. This task can then be marked and corrected using the answers provided on the PowerPoint once it is complete. The final activity requires students to complete a paragraph by filling in the blanks, in order to summarise what was learned this lesson. The mark scheme for this task is included so students can self-assess their work. The plenary activity requires students to complete one of the sentence starters included to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)