This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first task is for pupils to think > pair > share the factors which may cause a contribution of carbon dioxide into our atmosphere. Pupils can create a mind map in their books and then discuss their ideas as a table and then as a class. The next PowerPoint slide reveals some of the main factors which contribute to an increase in carbon dioxide levels in our atmosphere, pupils can check their work against these answers. For the next task pupils will be required to watch a video about the greenhouse effect and answer questions in their books, this task can be self-assessed using the answers provided once complete. Using this information pupils will then be asked to fill in the blanks on a diagram depicting the greenhouse effect, pupils will be given captions to write into the correct boxes on their worksheet. This can be self-assessed once it has been completed. Next pupils will be given a set of data on the mean world temperature change from 1960 to present day, students will be required to plot the data on a graph, describe the pattern of the graph and explain why the graph may be showing this pattern. The next part of the lesson focuses on global warming, students will firstly be given a set of questions which they will need to answer whilst watching a video. This work can then be self-assessed using the answers provided. For the very last task pupils will be given a card of information each detailing an environmental factor and it’s impact on living organisms. Pupils will need to wander around the room and share information with each other to complete their table of environmental factors. The plenary task is for pupils to identify what the questions might be for a set of answers provided on the PowerPoint presentation. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. The first part of this lesson will focus on a recap of some of the details learnt during the decay lesson, pupils are given a set of four multiple choice questions which they should answer in their books and then self-assess. The first task introduces recycling of materials in the ecosystem, pupils will need to read through a paragraph of information as a class. The slide will then be changed and pupils will need to try to recreate the paragraph as best as they can using the key words provided. Once completed the slide can be changed back to the initial paragraph for pupils to check and correct their work. The next part of the lesson is for pupils to look at the difference between a decomposers and detritivores, students will be given information in pairs and will need to teach each other about the organism card they have in their hands. Students will then try to write a description of each of the organisms in their books. The next part of the lesson focuses on the water cycle, firstly students will need to come up with as many processes as they can think of that contribute to the water cycle. Once this task has been assessed pupils will then be given a set of questions which they will need to answer whilst watching a video, once complete their answers can be assessed using the mark scheme provided. Using their answers from their previous tasks pupils will now need to match up the key words to the definition and the final task is for pupils to complete a diagram of the water cycle using the key words and definitions provided in the last task. The plenary task pupils will be given a set of 5 answers, it is up to the pupils to come up with 5 questions which may correspond to these 5 answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lessons starts with looking at the way in which we use models to represent the structure of different compounds, models include the 3D ball and stick model, 2D ball and stick model, dot and cross diagrams and displayed formula showing bonds. Pupils are reminded of the limitations of some of these models, this is something they should be able to recount. Pupils are now shown a diagram to show how intermolecular forces act between simple covalent molecules, pupils should be able to explain the difference between the strong covalent bonds between atoms but the weak intermolecular forces between molecules and how this relates to the the low melting and boiling points of simple covalent molecules. The next part of the lesson is going to focus on giant covalent structures, firstly pupils will watch a video and answer a set of questions. Their work can be self-assess using the answers provided on the PowerPoint presentation. Students are then introduced to the three main covalent structures - diamond, graphite and silicon dioxide. Students will be given a set of information on these structures which they will need to use to complete their worksheet on giant covalent structures. To assess their knowledge of this topic there is a set of ‘quick check’ questions, pupils of a higher ability may want to complete these questions in the back of their books without discussing with others. The work can be assessed using the mark scheme provided. The last part of the lesson focuses on fullerenes and graphene - two other giant covalent structures with unique properties. Students are firstly introduced to the structure and uses of these compounds before watching a video and answering questions about them. The work from this task can be self or peer assessed using the answers provided. The plenary task is for pupils to pretend they are a scientist researching the use of nanotubes, fullerenes and grapehene, they need to come up two ideas of how these materials can be used in future technologies. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical changes, electrolysis and energy changes’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students will firstly be shown a set of images, students will have to decide which are examples of an alkali/base and which are examples of acids. Next, students will watch a video on acids/alkalis and will need to answer a set of questions, after which they can self-assess their work using the mark scheme provided. The next part of the lesson focuses on pH, students are firstly reminded of the importance of the pH scale and will then need to complete an investigation to identify the pH of different substances. Students can use the practical sheet provided to complete this task, including the results table to record their results. The next part of the lesson looks at the difference between concentrated and dilute solutions, in terms of particles and in terms of risk/hazards when handling concentrated acids. Students will then need to summarise what they have learned with a fill-in-the-blank task, this work can be self-assessed using the mark scheme provided. The final part of the lesson pupils will focus on the difference between strong and weak acids in terms of ionisation. Students will also look at how pH values are related to the concentration of H+ ions, students will need to copy and complete a table to show the concentration of H+ ions per mol dm3 for each pH value, this work can then be self-assessed using the mark scheme provided. The plenary task is a ‘Pick a plenary’ task - pupils will need to either write a twitter message to summarise what they have learnt or write 5 quiz questions on the topics studied in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a video and a set of questions which pupils will need to answer about extinction and try and come up with a definition for this term. Once completed pupils can check their work against the answers provided on the PowerPoint. The next activity is for pupils to think > pair > share ideas about the sorts of changes that might occur within an organisms environment to bring about extinction. Pupils can discuss with their partner and create a mind map of their ideas in their books. Once pupils have completed this you can reveal some of the reasons for environmental change on the PowerPoint slide and pupils can check what they have got against the answers, adding in any they didn’t manage to get. The next activity is for pupils to read some cards of information about the causes of extinction, pupils can work in pairs or groups to read through these causes and summarise each one in their books. To put thees causes into context, the next activity is for pupils to look at examples of organisms which are at the brink of extinction and the reasons why. Pupils will be given a set of cards with information about a range of animal and plant organisms which are at different stages on the IUCN red list. Pupils will need to complete a table of information to describe the habitat and reasons why four of these organisms are endangered. The last part of the lesson will focus on mass extinctions, pupils will watch a video and answer questions about the causes and repercussion of mass extinction events. Once completed pupils can mark their work against the assessment criteria. The plenary activity is for pupils to pretend they are a conservationist campaigning to protect an organism of their choice, they need to write a twitter message to their followers to raise awareness of the factors which may be critically affecting the organism. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first part of this lesson focuses on biodiversity, pupils will watch a video and have to answer questions whilst watching the video. Once complete pupils can self-assess their work using the answers provided in the PowerPoint. The next slide shows a graph depicting the human population growth in the last 8000 years and information describing the effect this is having on our planet. The next part of the lesson focuses on human impacts on biodiversity. Firstly pupils will need to come up with a mind map of all the ways in which humans use the land. As an extension task pupils can also discuss what impact this may be having on our environment. Some key ideas will then be gone through using information provided on the PowerPoint. Pupils will then watch a video on human impacts on biodiversity, using the information in the video they will need to answer a set of questions. Once this task is complete pupils can self-assess their work using the answers provided. The next task focuses on waste produced from human activities, each pupil will be given a card of information on a specific pollutant and the effect it has on the environment. Pupils will need to walk around the room trading information in order to complete a table of information on these pollutants. The very last task is an exam-style question, higher tier pupils can complete this question in the back of their books without looking at their notes from the lesson. Once completed pupils can assess their work using the mark scheme provided. The plenary task is for pupils to write 3 facts, 2 key words and 1 question on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the process of diffusion, spraying perfume particles in the air is used as an example. Students are shown, by way of a particle diagram, how particles spread from an area of higher concentration to a lower concentration. Students are now asked to ‘copy and complete’ a paragraph to define the process of diffusion, this task can be assessed using the answers provided. Next, students will need to sketch diagrams demonstrating the various stages of diffusion, and will need to match the correct statements to the correct diagrams. This work can be then be self or peer assessed using the mark scheme provided. The next part of the lesson looks at factors that affect diffusion, students are firstly asked to ‘Think > Pair > Share’ their ideas on the factors which might affect the rate of diffusion. After students have fed back into class discussion, the answers are revealed for students to note down in their books. They will then look more closely at the effect of temperature on the rate of diffusion by watching a video and then summarising what they have learned by completing a fill-in-the-blank task. Two other factors which affect the rate of diffusion are particle size and state of matter. Students are shown a diagram and given an explanation for how particle size affects the rate of diffusion - the heavier the particle the slower it is to diffuse. Students are then asked to consider whether particles will diffuse more quickly in the gaseous state, compared to liquid or solid state. Their answers can be discussed in pairs before feeding back to the class, the answers can then be revealed using the mark scheme provided. Lastly, students will need to explain, in terms of particles, why a solid is unable to undergo diffusion whereas a gas and a liquid are able to. The plenary activity requires students to write down 3 facts and 3 key words from the lesson and pose one question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Organic Chemistry’ SoW. Students are firstly introduced to the idea of a ‘homologous series’ and look at how this applies to the pattern of formulae for the alkene series. Students are then asked to think about the differences between complete and incomplete combustion from what they have learned in previous lessons, before being shown the differences between complete/incomplete combustion of alkenes and how this explain why alkenes are rarely used as fuels. Next, students will watch a video on the reactions of alkenes with water and with halogens, using the information in the video they will need to answer a set of questions. The answers to this task are provided in the PowerPoint so that students can self-assess their work. Pupils will now be given a set of symbol equations between different alkenes and halogens, pupils will need to complete these calculations in their books, ensuring that they are balanced. Once complete, pupils can self-assess their work. The last part of the lesson focuses on the reaction of alkenes with hydrogen, students will be shown a simple hydrogenation reaction and will also be given some information about hydrogenation and whether it is a good or bad process in the production of margarine spreads from vegetable oils. Students will need to read this information and then answer a set of questions, this work can be self-assessed using the answers provided in the PowerPoint presentation. The plenary task is for pupils to write a Whatsapp message about what they have learned in the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Molecules & Matter’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a ‘Think > Pair > Share’ activity which requires pupils to recall the properties of a solid, liquid and gas. Once students have discussed this amongst themselves and as a class, they will then complete a fill-in-the-blank task to summarise the properties and the arrangement of particles of a solids, liquids and gases. Once this task has been completed students can self-assess their work suing the mark scheme included. Students will now be introduced to the idea of potential energy and internal energy, a video will then be shown and students will have to answer a set of questions. This work can then be self-assessed using the answers included in the PowerPoint. This then follows into a mid-lesson plenary, pupils will answer an exam question and then peer-assess their work. Next, students will study the different levels of forces of attraction between particles found in solids, liquids and gases. Their knowledge of what they have learned so far this lesson can then be checked using a summary worksheet, students complete their own worksheet, the answers to this are included in the PowerPoint for students to mark their work once complete. Lastly, students will carry out a ‘True or False’ task. The plenary task requires pupils to complete a 3-3-1 summary: 3 facts, 3 key words and 1 question to test their peers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by students considering in pairs/groups the names of different methods of contraception they have already heard of, they can create a mind map in their book which can then be checked against the list provided. Pupils will then watch a video which runs through some of the types of contraception out there and their pro’s and con’s, pupils will need to watch the video and note down as many advantages and disadvantages of these methods of contraception as they can. This task can be self-assessed using the answers provided. In the next activity pupils will be given a card sort in pairs or in groups, they will need to read through the information on methods of contraception and complete a table to summarise how these methods work or prevent pregnancy as well as their advantages and disadvantages. The next part of the lesson looks at the history of contraception, pupils will watch a video about Margaret Sanger - a progressive nurse in New York during the early 20th century. They will need to answer questions whilst watching the video, once finished their answers can be checked against the mark scheme provided. The final task is a ‘quick check -silent 5’ task, pupils will need to answer the summary questions about what they have learnt this lesson into their books. The plenary activity is for pupils to summarise what they have learnt this lesson in three sentences, using the list of key words that have been provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a recap from the previous lesson showing gametes fusing during fertilisation and the changes in chromosome numbers. The first task is for pupils to watch a video and answer a set of questions whilst they are watching, once the video is complete they can assess their work using the mark scheme provided. Pupils will then be given a worksheet with a diagram of meiosis occurring and statements where pupils will need to fill in blanks to complete the correct steps in the process. Pupils can assess their work using the answers provided. Pupils will then be shown the different between diploid and haploid cells and how this can be depicted in a diagram, they will be shown the changes that occur going from two haploid gametes to a diploid zygote. The next activity is for pupils to sort statements into two columns - mitosis or meiosis. Once this activity has been completed pupils can mark their work using the answers available. Pupils will now complete a quick check, pupils will answer questions about the topic of meiosis into their books. For higher tier pupils they can be challenged by completing the questions at the back of their books without using their notes. Once completed the work can either be self-assessed or peer-assessed. The final activity is an exam-style question which higher ability pupils can complete at the back of their books, this can then be assessed usng the mark scheme provided. The plenary activity is for pupils to pick a plenary between summarising the work from the lesson in three sentences or writing a definition for a set of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Organisms & their Environment’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! This lesson in the gas exchange in the leaf of a plant and limiting water loss begins with a starter discussion to remind students of the tissues found in leaves and the tracheal system in insects. Students will then be asked to think about the relationship between plant an animal cells and respiration of the two respectively. They should also consider when photosynthesis is taking place, and when it is not. The first task of this lesson is a diagram worksheet to label the structures of a leaf cell. Answers are on the following slide for self-assessment, followed by a light micrograph of leaf structure. The next task is to consider leaf adaptations for photosynthesis and identify the purpose of the adaptation (to absorb light, for gas exchange, reduce water loss, or transport). Answers follow for self-assessment. Students are then introduced to the stomata. They should make notes on the structure when the guard cells are swollen or shrunken. The next task is to answer three summary questions, sample answers are available on the following slide for self-assessment. The problem for all terrestrial organisms is water evaporation from the surface of their bodies. Students are asked to remember the various ways in which insects limit water loss before they are introduced to plant adaptations. Xerophytes are introduced as an example, including cacti and marram grass. Students will then complete a table using information cards about xerophytic adaptation, and four summary questions. Answers for both follow, for self-assessment. The final task is to complete an exam style question to consolidate their learning and self-assess to the sample mark scheme. The plenary is to write three sentences to summarise what they have learnt this lesson! All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Forces in Action’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to moments, using a spanner. Students are then introduced to the calculation - moment = force x distance from the pivot. Students are then shown a worked example using the calculation, before being presented with a problem to solve themselves. Next, students are shown a diagram of a man pushing down on one side of a see saw, at the other side is a bag of money. This diagram is labeled to show the effort force, pivot and load. Students are then given a worksheet on levers, students will need to identify the effort force, pivot and load in each of the diagrams and also match the key words to the correct definition. This work can be self-assessed using the mark scheme provided once it is complete. The last two tasks are assessment tasks, firstly students will copy and complete the paragraph, using the key words provided, to summarise what they have learned this lesson. This can then be self-assessed using the mark scheme provided. Lastly, students are presented with a set of moment problems, using the calculation they learned at the beginning of the lesson students will need to work through these calculations. The mark scheme for this task is also included so students can self-assess or peer-assess their work. Lastly, students will be shown a diagram of apparatus which can be used to investigate the turning effect of a force. Students are asked some questions about this investigation, they will then need to complete a ‘Quick Check’ task which will assess students knowledge of what they have learned this lesson. This task can then be self-assessed using the mark scheme provided. The plenary task requires students to copy and complete a sentence starter to summarise what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated The plenary task requires students to write a Whatsapp message to summarise what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 Module on ‘Particles & Their Behaviour’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to particles, describing the differences between materials which are made up of just one type of particle - a substance - and those that are made up of different particles - a mixture. Students are also introduced to the idea of properties of a substance as a description of the way in which a substance looks like and behaves. Students will then carry out a ‘Copy and Complete’ task where they will fill in the blanks to outline what they have learned about particles so far this lesson. This task can be self-assessed using the mark scheme provided on the PowerPoint presentation. Students are now introduced to the three states of matter - solid, liquid and gas. Students will firstly watch a video, using which they will need answer a set of questions about the arrangement of particles in a solid, liquid and a gas. The answers to this task are included in the PowerPoint for students to self-assess their work once it is complete. Next, students will draw a summary table into their books and will be given a card sort, students will need to sort the statements into the correct part of their table to describe the properties of solids/liquids/gases. The mark scheme for this task is included on the PowerPoint presentation, it can be used for pupils to self-assess their work. Lastly, students are given another set of statements describing the properties of solids/liquids/gases. Students need to draw a Venn diagram into their books and will need to sort the statements into the Venn diagram, this task can be marked and corrected once complete. The plenary task requires students to unscramble a set of anagrams, each anagram is a key word learned from this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a ‘Think > Pair > Share’ activity which requires students to consider the definition for the term ‘evolution’. After students have had some time to talk about this, their ideas can be shared with the class and the answer can be revealed for students to check and correct their work. This leads into an introduction to the fossil record as means of evidence for evolution, students will then need watch a video on the formation of fossils - during which they will answer a set of questions. Students can now mark and assess their work using the mark scheme provided. Students will now be introduced to the idea of ‘Natural Selection’, they will be told the mechanism by which this works by using the example of girraffes with longer and shorter necks. Students will now be asked to complete a cartoon strip to summarise this process, once this task has been completed students will be able to mark and assess their work using the answers provided in the PowerPoint presentation. The last part of the lesson students will be shown a video on examples of natural selection in action. Whilst watching this video, students will need to answer a set of questions, once this has been completed students can self-assess their work using the answers provided. The plenary task requires students to write three quiz questions to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. The lesson begins with an introduction to electromagnets, students are shown a diagram of an electromagnet and told how an electromagnet is made; students can make a note of these details in their books. This follows into a video, students will watch the video and whilst watching will be given a series of questions to answer. Once this task is complete, students can then self-assess their work against the mark scheme that is provided. Students will now be asked to consider what might affect the strength of an electromagnet, students can be given a few minutes to come up with their ideas in pairs before feeding back into a class discussion. Students will now complete an investigation into whether the following two factors - number of coils of wire & voltage - will affect the strength of an electromagnet. Students should follow the instructions provided on the PowerPoint presentation and complete the table of results in their books. Once the investigation has been completed, students will complete a ‘Quick Check’ task in their books to assess their knowledge of what they have learned this lesson. The mark scheme for this is included for students to self-assess their work once it is complete. Lastly, students will complete a ‘Copy and Correct’ task whereby students will need to copy a paragraph of information into their books, correcting any of the information that they seem to be erroneous. This task can also be checked against the answers provided on the PowerPoint presentation. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the Periodic Table, students will be shown a diagram of the Periodic Table and will be asked to identify whether they think certain elements are metals or non-metals, or even semi-metals (metalloids). This task can the be checked and assessed against the answers provided on the PowerPoint. Next, students will be given part of a table of information on the properties of metals compared to non-metals. They will need to walk around the room and trade information with others in order to successfully complete their own table. Once this task has been completed, students can self-assess their work using the mark scheme provided. Students are now shown a diagram of an iron roof and a copper roof and how this can change over time, students are asked to think about what is happening in these picture & try to identify the chemical reaction. After a short class discussion, the answers to the questions will then be revealed. Students will then be told that non-metals react in a similar way with oxygen, they will then be shown 4 incomplete word equations for the reaction of different non-metals with oxygen. Students will need to complete this equation, this task can the self-assessed using the mark scheme provided. The last activity is a true or false activity, students will need to identify whether the statements about metals/non-metals are true or false. This task can the be marked using the mark scheme provided. The plenary task is an exit card, students will need to write down three key words, one fact and a question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Biological Molecules’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! This lesson begins with a starter to encourage discussion about the differences between the induced fit and lock and key models of enzyme action. Students are also asked to explain how temperature and pH balance affect enzyme action. The following slide briefly reviews enzyme-controlled reactions then asks students to use their mini whiteboards to write down four factors that might affect successful collision. Students can self-assess with the answers on the slide. Students are then taught to measure enzyme-catalysed reactions; in the notes I encourage you to ask students for examples and what the measurable changes are. Students can then use the slide to work through the ‘fill in the blank style’ paragraph using a graph as a guide to understand enzyme-catalysed reaction. On the board where everyone can see you should write - substrate - product (H202 -> h2 + 02). The following slide includes answers so students may self-assess or check their answers with a partner. The slides then work through a few more graphs to explain the effects of temperature and pH on enzyme action. The slides are lecture style, but you can see in my mores a few suggestions for discussion questions and further lecture material. Following these slides students are encouraged to graph on their own or perhaps as a large group. Students are then given the opportunity to answer two graph style questions in their books and then self-assess. Next the class will watch a video about measuring the rate of reaction at fixed points of time. After the video, students should answer four questions in their books and discuss the answers as a class. The next few slides build upon these questions and students are asked to practise calculating reaction rates on their own before self-assessing. The plenary requires students to solve seven anagrams in their books, then write an original sentence with each word. Each task or graph from the full lesson can be found on slides 22-27. All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)