A quick, 10 minute starter activity which allows students to work out anthropometric averages. Encourages the use of correct terminolgy and functional numeracy. PowerPoint can used as a stand-alone resource if required.

Introduces students to the importance of measurements for use. It also facilitates discussion into ergonomically designed products. Can be used alongside the Ergonomics & Anthropometrics worksheet.

A cheat sheet for analysing artwork within art and design and graphic design. Includes definitions key words for use within anaylsis and annotations of artists/designers work and within their own annotations. A4 size, suitable for printing or scaling up and displaying in a classroom.

GCSE Product Design: Design Consideration for Product Launch. This PowerPoint contains a full lesson which explains Market Pull and Technology Push, as well as how products are developed and launched as a result of marketing and advertising. There is a re-design task where students can work in groups to re-design a child’s toy, paying close attention to the “design considerations” from the specification: The influence of fashion, trends, taste and/or style. The impact on society. The impact on usability. The impact on the environment.

A skills based PowerPoint introducing students to two unique approaches to avoiding design fixation. This PowerPoint can be delivered as a lesson, used in parts as starters or plenaries or integrated into more detail project work. The design approaches provided work well with design & technology focused lessons, but could also be used for engineering lessons, or part of KS3 technology rotations where skills building is the main focus of the lessons.

This resource pack consists of 24 weeks (2 terms) worth of mock exam questions, structured around the specification content of EDUQAS A Level Product Design, as well as model answers in the PowerPoints, written using the mark schemes and examiners reports. The questions can be given as standalone homework or used as extension tasks. The questions are mixed, (high and low mark questions), and gathered from past papers. I would recommend you give the students one question a week to complete for homework and then review it as group using these PowerPoints. Can also be used to cover the specification content from other A Level exam boards, as the content required is very similar.

Key revision information including research tasks, relevant to each of the following areas: 1. Materials 2. Design Considerations 3. Consumer Rights and Legislation 4. Social, Moral , Environmental and Legal 5. Health and Safety 6. Manufacturing Processes Good for exam prep lessons, cover work or home learning.

This booklet breaks down each page of the NEA requirements in detail via a Product Design route, as well as offering a resource list of recommended literature, and sketchbook checklist to ensure students complete all work required for assessment. This booklet has been constructed around the EDUQAS A Level Design Technology specification, although it can be easily adjusted to suit any exam board. This resource is extremely helpful in allowing students to see exactly what content is required in each page of their NEA.

Graphic Design Children’s Book Illustration Home Learning Mini Project: 5 hours worth of teaching content. Self assessment criteria for each task. Tasks range from investigation into illustrators, through to design development, final design and self evaluation. This project will allow students to take inspiration from existing children’s book illustrators, to redesign the front cover of a children’s book of their choice. The project can be created by hand, or using digital design tools like Microsoft Office, or Adobe Design Software. Suitable for KS3 and KS4 art and design and D&T.

Logo Design Home Learning Project, 5 hours worth of lesson content. Fully differentiated tasks with self assessment criteria for each. Students are encouraged to investigate a brand of interest and re-design their logo. Project can be completed on digital design software or by hand. The project encourages iterative design and constant analysis and reflection of work to enhance outcomes, and create a logo suitable for their selected brand. Suitable for KS3 and KS4 students studying Art and Design and D&T.

A 5 hour home learning graphics project focused on the importance of recreating public transport signage, to visually remind people to stay as safe as possible during the COVID-19 pandemic. Suitable for KS3 and KS4 students, studying art and design or technology. Complete with self assessment criteria for all tasks. Work can be produced by students digitally or by hand. Please check out my other graphic design and D&T resources on my TES shop for more projects and guidance resources and remote learning tasks and projects.

A 9 hour KS3 technology project focusing on Upcycling and board game creation. The students are required to investigate existing board games, design and make their own and create a small wooden dice, clay counters/game pieces, and a fabric sleeve to hold their game. The resource is clearly broken down into tasks and visual examples of previous work to help scaffold and support student learning. Material requirements: A4 modelling card air dry clay (or playdough/modelling clay) 30x30mm square of wood (pine ideally) recycled fabric for the sleeve (old curtains etc)

A promotional campaign focused graphic design project which encourages students to think about composition, typography, colour and imagery to create a poster for an event of their choice. The posters should ideally be created digitally, but could be designed by hand if required. The resource is broken up into tasks which have examples and clear instructions. A good project for introducing KS3 or KS4 students to the basics of graphic design.

This home learning project will give students the opportunity to think creatively about a place they have visited, and allow them to create a visual travel guide to help visitors find out more about their chosen location/event. PowerPoint is designed to be delivered as a 5 hour mini project. Designs can be created by hand or digitally. Tasks are fully differentiated with examples and self assessment criteria. Suitable for KS3 and KS4 students, studying Art and Design and D&T.

A 5 hour, home learning graphic design project, focusing on the re-design of branding for 3 popular social movements: Climate Change Social Justice Mental Health The resource can be used to produce digital outcomes, or hand drawn designs. The resource features detailed self assessment criteria and example work to inspire students. Suitable for KS3 or KS4 students studying Art and Design or D&T. Please check out my other graphic design resources within my shop.

A mini design and make project which introduces students to the required content for assessment for both GCSE and A Level Design Technology. The students are required to manufacture a holder for a boiled egg, using a small amount of given dissimilar materials. They are to produce a mini portfolio of design work alongside the 3D outcome. Pack consists of the unit of work, from design brief to evaluation, evaluation help sheet, as well as a summative assessment sheet for the teacher, which allows you to assess your students on the quality of the portfolio, design work and 3D outcome, as well as offering them the chance to feedback to you what they enjoyed/disliked about the project – an OFSTED favourite.

An OFSTED graded Outstanding lesson for introducing students to the design, make and evaluate requirements of design technology. Ideal for Key Stage 3,4 and 5 including students with no previous hard technology experience. The main focus of the lesson is to work as part of a small team to creatively problem solve, by creating a cardboard chair with limited equipment and resources. The chair must be freestanding, and support the weight of a team member. All Personal Learning Thinking Skills and Functional Skills are developed throughout this lesson and are detailed in the lesson plan. Resource is fully differentiated including a help sheet and extension task. Assessment for Learning is fully detailed, as is a risk assessment and resource requirement list.

A design and modelling design & technology project which introduces students the following skills and terminology: Design Iteration 3D Modelling Forces and Movement Aerodynamics Resources required: Craft knives/scissors A4 corrugated cardboard A class set of 4/5mm wooden dowell cut at 55mm. (2 per student) Plastic cotton reels (2 per student)

This project will introduce students to the world of metals, and give them the opportunity to manipulate a non ferrous metal through cutting and shaping. The project is based around a given design brief - creating a small metal gift for a zoo gift shop. There is visual examples to help guide the students, as well as assessment criteria and design based extension tasks, including designing a logo for the zoo, packaging for the gift and a shop front for the gift to be sold in. There is also a further extension design task which focuses on modelling and designing a 3D schematic map for their zoo.

A graphic design project focusing on producing a promotional poster for an upcoming school event. The resource has working examples of the project and includes task by task guidance on how to complete the project. Can be set as independent work or as part of a lesson by lesson scheme of work. The resources starts with examples of the graphic design fundamentals and builds on these through the use of all skills during the project. Work can be produced on Photoshop, photopea.com (free), Canva or Google Slides. Can be used for KS3 or as part of a skills based mini project for KS4 graphic design, through an art and design GCSE. 18-20 hours expected completion time. Can be extended and reduced according to need.