Mini-project that aims to consolidate knowledge from P.1.1.1 to P1.1.4 (convection, conduction, heat transfer, heating and insulation). Students to design and make their own model of an insulated house. Can get students to bring their own materials or provide them (e.g. cardboard boxes, tinfoil etc.) Takes 2 to 3 lessons. Winner decided by setting up a thermometer in the house and using a heat source, a light bulb that gives off a lot of heat works best, and then seeing which house reaches the highest internal temperature.

Round 1: Name that scientist Round 2: Dingbats Round 3: Science general knowledge Round 4: Name that film Round 5: Science related music Round 6: World flags Round 7: Logos

High ability Unit 3 Physics (AQA) eye lesson. Including dissection activity to retrieve the lens with differentiated worksheets provided for this. 6 mark QWC question, with helpsheets,

Full 9 lesson Forces SOW. Aimed at a mixed ability Y7 set. Worksheets marked STR or SUP are differentiated (stretch and support). All lessons planned in 6-part lesson format. Lesson 1 - Introduction to forces Lesson 2 - Squashing and stretching Lesson 3 + 4 - Hooke's Law investigation Lesson 5 - Drag and friction Lesson 6 - Forces at a distance Lesson 7 - Balanced and unbalanced Lesson 8 - F = ma Lesson 9 - Forces review Most resources my own though some resources may be adapted from other sources, including Activate and TES. Feedback appreciated.

This booklet fits the new AQA Combined and Separate Science Physics courses. This booklet is intended to be used as a flipped learning activity before the start of each topic, but can also be used as a independent revision booklet. See instructions on the front: Before the topic • Use your revision guide to answer the 10 comprehension questions covering the basics relating to that topic. • The aim is that you cover these beforehand so that we can spend lesson time on application of knowledge. • All information can be found on the revision guide pages that are referenced for each topic. After the topic • Look back over your original answers and add to them using purple pen. Extension Each topic will have an extension question that requires you to apply your knowledge of the basics. You can attempt this before or after the topic. The revision guide page references are for the Collins AQA guides.

An illustrated display consisting of 6 books and 6 TV series' that would give students a wider understanding (and hopefully some enthusiasm!) about science.

Suitable for low ability.

Full 6 lesson Sound SOW. Aimed at a low ability Y8 set. Worksheets marked STR or SUP are differentiated (stretch and support). All lessons planned in 6-part lesson format. Lesson 1 - Wave properties Lesson 2 - Sound Lesson 3 - Loudness and pitch (was split over two lessons for low ability class) Lesson 4 - Detecting sound Lesson 5 - Echoes and ultrasound Lesson 6 - Sound review and assessment Most resources my own though some resources may be adapted from other sources, including Activate and TES. Feedback appreciated.

Six lesson topic covering voltage and resistance (part of the Electromagnets SOW from the new AQA Mastery style curriculum). Mainly aimed at Y7. Lesson 1 - Voltage Lesson 2 - Resistance Lesson 3 - Voltage in series circuits Lesson 4 - Voltage in parallel circuits Lesson 5 - Resistance in series circuits Lesson 6 - Resistance in parallel circuits Includes RAG document to use throughout and mini-assessment in the final lesson. Parts of resources taken from other lessons, some of which were found on TES.

Full SOW for Topic 20 (combined) or 3 (Physics only): Particle Model of Matter. AQA GCSE Combined Science or Physics only (exam from 2018). Lesson 1 - Particle model to explain density Lesson 2 - Density of regular objects RP Lesson 3 - Density of irregular objects RP Lesson 4 - Chemical and Physical changes Lesson 5 - Changes in state Lesson 6 - Internal energy of a system Lesson 7&8 - Specific heat capacity (investigation and theory) Lesson 9 - Specific latent heat Lesson 10 - Motion of particles in a gas Physics only: Lesson 11 - Gas pressure and temperature Lesson 12 - Gas pressure and volume Lesson 13 - Work done on a gas Topic assessment also included. All lessons planned in 6-part lesson format. Most resources my own though some resources may be adapted from other sources, including AQA and TES. Feedback appreciated.

Stretching questions linked to the AQA GCSE Combined Science (exams from 2018). Included are A3 revision sheets on: Particle Model of Matter Forces Electricity Will be completing these for others topics and will upload in due course if these are found the be useful. If you find this useful please check out the ones I have done for other AQA Chemistry GCSE topics in my shop.

This project was designed as part of a Y9 SOW. The idea is that the project should take 4 - 6 lessons and will ensure that students recall and understand the basics needed to access GCSE. This is part of a series of 10 projects (all of which can be found in my shop) to cover all KS3 content before beginning GCSE.

This project was designed as part of a Y9 SOW. The idea is that the project should take 4 - 6 lessons and will ensure that students recall and understand the basics needed to access GCSE. This is part of a series of 10 projects (all of which can be found in my shop) to cover all KS3 content before beginning GCSE.

This project was designed as part of a Y9 SOW. The idea is that the project should take 4 - 6 lessons and will ensure that students recall and understand the basics needed to access GCSE. This is part of a series of 10 projects (all of which can be found in my shop) to cover all KS3 content before beginning GCSE.

This project was designed as part of a Y9 SOW. The idea is that the project should take 4 - 6 lessons and will ensure that students recall and understand the basics needed to access GCSE. This is part of a series of 10 projects (all of which can be found in my shop) to cover all KS3 content before beginning GCSE.