A range of power points to teach Edexcel C3 Topic 4, covering molar volumes and the Haber process. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic.

A range of power points to teach Edexcel C3 Topic 3, covering electrolysis, electrolytic process and the uses of electrolysis. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic.

A full set of power points that guides learners through every lesson in the Edexcel C3 unit. Plus, learner friendly specifications, broken down into the different topics so that learners can assess their own progress through the unit. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic. Power points are fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners. Many of the power points were used during ofsted observations which were given outstanding judgements. All passwords should have been deleted from resources to be edited, however if not, password is: science4

AQA C1.3 (new spec) - Models of the atom (with developments). A fully resourced lesson about atoms, elements and compounds to be used when teaching the New specification of AQA C1. Fully resourced with differentiated tasks and activities shown on power point slides.

OCR 21st century science C4lessons. All lessons to cover OCR C4unit of work. Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.

AQA Chemistry New Specification! All lessons to cover topic 1 (paper 1) from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. Specification points covered: 4.1.1.1 - atoms, elements and compounds 4.1.1.2 - Mixtures 4.1.1.3 - Scientific models of the atom 4.1.1.4 - relative electrical charges of subatomic particles 4.1.1.5 - size and mass of atoms 4.1.1.6 - electronic structure 4.1.2.1 - The periodic table 4.1.2.2 - development of the periodic table 4.1.2.3 - metals and non-metals 4.1.2.4 - Group 0 4.1.2.5 - Group 1 4.1.2.6 - Group 7 Chemistry Triple science lessons: 4.1.3.1 + 2 - Transition metals and their properties Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.

Full resourced lesson power points to cover every specification point of the OCR 21st century science C7 - further chemistry unit. Lesson power points have differentiated tasks to challenge most able and support less able learners. Regular progress checks to assess understanding through lessons also included on power points.

AQA C8.5 (new spec - 4.8.3) - Testing for cations A fully resourced lesson about using sodium hydroxide to test for cations to be used when teaching the New specification of AQA C8 (Chemical analysis). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson

A series of 1 mark revision questions to cover the C5 unit of 21st century science. A series of different mark questions (2/3/4) for revision for the upcoming exams. To be given to learners to revise the basic knowledge and understanding needed for this unit for their exam. Could be done in class or for homework.

AQA C2.6 (new spec - 4.2.6 - paper 1, topic 2 new spec) - Properties of giant covalent substances A fully resourced lesson about the properties of giant covalent substances to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.

AQA C2.8 (new spec - 4.2.8 - paper 1, topic 2 new spec) - Polymers and properties A fully resourced lesson about polymers and their properties to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.

AQA C2.11 (new spec - 4.2.11 - paper 1, topic 2 new spec) - Metallic bonding and properties A fully resourced lesson about metallic bonding and its properties to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.

AQA C2.13 (new spec - 4.2.13 - paper 1, topic 2 new spec) - Nanoparticles (for triple science) A fully resourced lesson about nanoparticles and their properties (for triple science) to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.

AQA C3 (New Spec – Unit 4.3 – Quantitative chemistry) Lesson: C3.1 - Mass conservation and balancing equations Specification points covered = 4.3.1.1 conservation of mass and balanced chemical equations 4.3.1.3 mass changes when a reactant or product is a gas A fully resourced lesson about Mass conservation and balancing equations to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides.

AQA C1.9 (new spec) - Trends in the periodic table. A fully resourced lesson about trends in the periodic table to be used when teaching the New specification of AQA C1. Fully resourced with differentiated tasks and activities shown on power point slides.

AQA C8.3 (new spec - 4.8.3) - Flame testing and instrumental analysis A fully resourced lesson about flame testing and instrumental analysis to be used when teaching the New specification of AQA C8 (Chemical analysis). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.

AQA Chemistry New Specification! All lessons to cover topic 3 (paper 1) – Quantitative Chemistry, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy and triple specification points and lessons: 4.3.1.1 – Conservation of mass and balanced chemical equations (C3.1 lesson) 4.3.1.2 – Relative formula mass (C3.2 lesson) 4.3.1.3 – Mass changes when a reactant or product is a gas (C3.1 lesson) 4.3.2.1 – Moles (Higher tier) (C3.3 lesson) 4.3.2.2 – Amount of substances in equations (Higher tier) (C3.4 lesson) 4.3.2.3 – Using moles to balance equations (Higher tier) (C3.5 lesson) 4.3.2.4 – Limiting reactants (HT) (C3.5 lesson) 4.3.2.5 – Concentration of solutions (C3.6 lesson) Chemistry Triple science specification points and lessons: 4.3.4 – Using concentrations of solutions in mol/dm3 (HT) (C3.7 lesson) 4.3.3.1 – Percentage yield (C3.8 lesson) 4.3.3.2 – Atom economy (C3.9 lesson) 4.3.5 – Molar volume of gases (HT) (C3.10 lesson)

AQA C2.7 (new spec - 4.2.7 - paper 1, topic 2 new spec) - Graphene and fullerenes A fully resourced lesson about graphene and fullerenes to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.

AQA Chemistry New Spec (Paper 2 Topic 2- exams 2018) – Organic Chemistry (4.7)AQA Chemistry New Specification! All lessons to cover topic 7 (paper 2, topic 2) – Organic Chemistry, from the new spec (exams 2018). Lessons cover all specification points of this topic (see below). The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.7.1.1 – Crude oil, hydrocarbons and alkanes (C7.1 lesson) 4.7.1.2 – Fractional distillation and petrochemicals (C7.2 lesson) 4.7.1.3 –Properties of hydrocarbons (C7.2 lesson) 4.7.1.4 – Cracking and alkenes (C7.3 lesson) Chemistry Triple science specification points and lessons: 4.7.2.1 – Structure and formulae of alkenes (C7.4 lesson) 4.7.2.2 – Reactions of alkenes (C7.4 lesson) 4.7.2.3 – Alcohols (C7.5 lesson) 4.7.2.4 – Carboxylic acids (C7.6 lesson) 4.7.2.4 – Reaction of carboxylic acid and alcohols (esters) (C7.7 lesson) 4.7.3.1 – Addition polymerisation (C7.8 lesson) 4.7.3.2 – Condensation polymerisation (HT) (C7.9 lesson) 4.7.3.3 – Amino acids (HT) (C7.10 lesson)  4.7.3.4 - DNA and other naturally occurring polymers (HT) (C7.11 lesson)

AQA A level chemistry - Physical chemistry Topic 1 - Atomic structure, lesson 3 - Electron configuration and ionisation energies Specification points covered = 3.1.1.3 - Electron configuration Fully resourced lesson covering the following with information and tasks: Electron configurations of atoms and ions up to Z = 36 in terms of shells and sub-shells (orbitals) s, p and d. Ionisation energies. Students should be able to: • define first ionisation energy • write equations for first and successive ionisation energies • explain how first and successive ionisation energies in Period 3 (Na–Ar) and in Group 2 (Be–Ba) give evidence for electron configuration in sub-shells and in shells. Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.