Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
AQA Chemistry New Spec (Paper 2 Topic 2- exams 2018) – Organic Chemistry (4.7) AQA Chemistry New Specification!
All lessons to cover the trilogy part of topic 7 (paper 2, topic 2) – Organic Chemistry, from the new spec (exams 2018).
Lessons cover the combined 'trilogy' science route chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.7.1.1 – Crude oil, hydrocarbons and alkanes (C7.1 lesson)
4.7.1.2 – Fractional distillation and petrochemicals (C7.2 lesson)
4.7.1.3 –Properties of hydrocarbons (C7.2 lesson)
4.7.1.4 – Cracking and alkenes (C7.3 lesson)
AQA C5 (New Spec – Unit 4.5 – Energy Changes)
Lesson: C5.2 - Reaction profiles and bond energy calculations
Specification points covered = 4.5.1.2 – Reaction profiles
4.5.1.3 – The energy change of reactions (HT Only)
A fully resourced lesson about reaction profiles and calculating bond energies to be used when teaching the New specification of AQA C5 (Paper 1, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C5 (New Spec – Unit 4.5 – Energy Changes)
Lesson: C5.3 - Cells and batteries (Triple only)
Specification points covered = 4.5.2.1 – Cells and batteries
A fully resourced lesson about cells and batteries to be used when teaching the New specification of AQA C5 (Paper 1, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C5 (New Spec – Unit 4.5 – Energy Changes)
Lesson: C5.1 - Energy transfer during exothermic and endothermic reactions
Specification points covered = 4.5.1.1 – Energy transfer during exothermic and endothermic reactions
Includes required practical activity 4!
A fully resourced lesson about exothermic and endothermic reactions to be used when teaching the New specification of AQA C5 (Paper 1, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C4 (New GCSE Spec – Unit 4.4 – Chemical changes)
Lesson: C4.7 - Titrations
Specification points covered =
4.4.2.5 - Titrations (Triple only) (C4.7 lesson) (Includes required Practical activity 2)
A fully resourced lesson about titrations to be used when teaching the New specification of AQA C4 (Paper 1, Topic 4).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C4 (New GCSE Spec – Unit 4.4 – Chemical changes)
Lesson: C4.9 - What is electrolysis?
Specification points covered =
4.4.3.1 - The process of electrolysis (C4.9 lesson)
4.4.3.2 - Electrolysis of molten ionic compounds (C4.9 lesson)
4.4.3.4 - Electrolysis of aqueous solutions (C4.9 lesson)
4.4.3.5 - Representation of reactions as half equations (HT only)(C4.9 lesson)
A fully resourced lesson about electrolysis to be used when teaching the New specification of AQA C4 (Paper 1, Topic 4).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C4 (New GCSE Spec – Unit 4.4 – Chemical changes)
Lesson: C4.10 - Using electrolysis to extract metals
Specification points covered =
4.3.3.3 - Using electrolysis to extract metals (C4.10 lesson)
A fully resourced lesson about using electrolysis to extract metals to be used when teaching the New specification of AQA C4 (Paper 1, Topic 4).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.1 – Using the Earth's resources and sustainable development
Specification points covered =
4.10.1.1 - Using the Earth's resources and sustainable development
A fully resourced lesson about using the Earth's resources and sustainable development to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.8 – Useful alloys (TRIPLE ONLY LESSON)
Specification points covered =
4.10.3.2 - Useful alloys
A fully resourced lesson about useful alloys, focussing on copper, aluminium, gold and steel to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides. Lesson has a past 6 mark question within to allow assessment of extended answer questions.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.2 – Potable water and required practical 8
Specification points covered =
4.10.1.2 - Potable water
A fully resourced lesson about potable water, the lesson also includes instructions for required practical 8, analysis and purification of water samples to be used when teaching the New specification of AQA C10 - Using resources (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA P2 (New GCSE Spec – Unit 4.2 – Electricity)
Lesson: P2.2 – Current, resistance and potential difference
Specification points covered =
4.2.1.3 - Current, resistance and potential difference
A fully resourced lesson about Current, resistance and potential difference to be used when teaching the New physics specification GCSE of AQA P2 (Paper 1, Topic 2 - Electricity).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.5 – Life Cycle Assessments
Specification points covered =
4.10.2.1 - Life Cycle Assessment
A fully resourced lesson about life cycle assessments to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5 - Using Resources).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.9 – Glass, ceramics, polymers and composites (TRIPLE ONLY)
Specification points covered =
4.10.3.3 - Ceramics, polymers and composites
A fully resourced lesson about glass, ceramics, polymers and composites to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.7 – Rusting and its prevention (TRIPLE ONLY)
Specification points covered =
4.10.3.1 - Corrosion and its prevention
A simple, easy to follow lesson about rusting and the prevention of rusting to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA P2 (New GCSE Spec – Unit 4.2 – Electricity)
Lesson: P2.1 – Circuit symbols, electric current and charge
Specification points covered =
4.2.1.1 - Standard circuit diagram symbols
4.2.1.2 - Electrical charge and current
A fully resourced lesson about circuit symbols, electric current and charge to be used when teaching the New physics specification GCSE of AQA P2 (Paper 1, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA P2 (New GCSE Spec – Unit 4.2 – Electricity)
Lesson: P2.5 – Parallel Circuits
Specification points covered =
4.2.2 - Parallel Circuits
A fully resourced lesson about current, potential difference and resistance in parallel circuits to be used when teaching the new physics specification GCSE of AQA P2 (Paper 1, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA P2 (New GCSE Spec – Unit 4.2 – Electricity)
Lesson: P2.4 – Resistors and required practical 4 (power point is set up for students to complete practical for a resistor in circuit)
Specification points covered =
4.2.1.4 - Resistors and required practical 4
A fully resourced lesson about resistors and required practical 4 (which resistor you use from the list suggested in the specification will depend on your equipment in department. We only have resistors available, hence the practical has been done for this. The power point may need altering to suit your department's equipment) to be used when teaching the new physics specification GCSE of AQA P2 (Paper 1, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.10 – Making ammonia and the Haber process (TRIPLE ONLY)
Specification points covered =
4.10.4.1 - The Haber process
A fully resourced lesson about Making ammonia and the Haber process to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA P2 (New GCSE Spec – Unit 4.2 – Electricity)
Lesson: P2.9 – The National Grid
Specification points covered =
4.2.4.3 - The National Grid
A fully resourced lesson about the National Grid to be used when teaching the new physics specification GCSE of AQA P2 (Paper 1, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Physics New GCSE Spec (Paper 1 Topic 2 - exams 2018) – Electricity (4.2) TRILOGY ONLY LESSONS
All lessons to cover the trilogy course for topic 2 (paper 1, topic 2) – Electricity, from the new spec (exams 2018). Lessons to cover the whole of the trilogy course for this topic.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
4.2.1.1 - Standard circuit symbols (lesson P2.1)
4.2.1.2 - Electric charge and current (lesson P2.1)
4.2.1.3 - Current, resistance and potential difference (lesson P2.2)
Required Practical 3 (lesson P2.2)
4.2.1.4 - Resistors (lesson P2.3)
Required practical 4 (lesson P2.3)
4.2.2 - Series and parallel circuits (lesson P2.4 and P2.5)
4.2.3.1 - Direct and alternating potential difference (lesson P2.6)
4.2.3.2 - Mains electricity (lesson P2.7)
4.2.4.1 - Power (lesson P2.8)
4.2.4.2 - Energy transfers in everyday appliances (lesson P2.8)
4.2.4.3 - The National Grid (lesson P2.9)
