Tracker to be used with the AQA GCSE DT Theory Resources (Available on TES ACAResources). https://www.tes.com/teaching-resources/shop/ACAResources Simple input: 1 = Section Complete h = Section set for homework n = Section not complete or overdue blank = Section not yet set Includes visual percentage completion bars (auto-generated) to give teacher and students clarity and opportunity for individual target setting. Also includes student tickbox sheet. Encourages students to take ownership of their learning of the exam theory, and the visual progress scores provide motivation and clear goals. Students can work on different sections where appropriate, and in many cases students may wish to complete sections individually in their own time and bring them back to be ‘checked off’. Each AQA GCSE DT Theory resource includes exam style questioning which can be used to further check understanding of each section upon completion.

This is a free sample from the ACA Resources GCSE DT theory series https://www.tes.com/teaching-resources/shop/ACAResources *AQA GCSE Design and Technology (DT) - Exam Theory - Section 1.4 - Sustainability and Social Issues This resource contains all of the key knowledge that the students are required to know for Section 1.4 - Sustainability and Social Issues Continuous Improvement Lifecycle Assessment Recycling The 6 Rs Social Factors Working Conditions Health Impacts The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students absolute clarity when progressing through the theory required for the exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with a tracker designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity *(particularly effective when used with a tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enchanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (Available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on your tracker (which I recommend you set up, student names down the side, sub-sections along the top). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE DT - Review Booklet Sections 1-3 This booklet is designed to allow students to engage in short review tasks for retrieval practice of theory lesson content. The review booklet is designed to accompany the theory lessons, which can be found at ACA Resources on TES https://www.tes.com/teaching-resource/complete-gcse-dt-theory-workbooks-12191361

Tracker to be used with the A-Level DT Theory Resources (Available on TES ACAResources). https://www.tes.com/teaching-resources/shop/ACAResources Simple input: 1 = Section Complete h = Section set for homework n = Section not complete or overdue blank = Section not yet set Includes visual percentage completion bars (auto-generated) to give teacher and students clarity and opportunity for individual target setting. Also includes auto-generated progress bars for display in lesson, and printing as evidence of progress over time. Encourages students to take ownership of their learning of the exam theory, and the visual progress scores provide motivation and clear goals. Students can work on different sections where appropriate, and in many cases students may wish to complete sections individually in their own time and bring them back to be ‘checked off’. Each A-Level DT Theory resource includes exam style questioning which can be used to further check understanding of each section upon completion.

AQA GCSE Design and Technology - Knowledge Organiser for Section 5 - Woods, Metals and Polymers Knowledge Organiser containing all of the key words needed in Section 5 - Woods, Metals and Polymers, in preparation for the AQA GCSE Design and Technology exam. The sections in this knowledge organiser are aligned with the sections in the AQA GCSE Design and Technology revision guide by CGP Books. This knowledge organiser is particularly effective when used in combination with our other theory resources to be found in our store. Knowledge organisers are also available for all other sections (Sections 1-5). Suggestions for use: Print out the knowledge organisers as a booklet for your GCSE students. You may also consider creating a version with the descriptions in blank, so that students can use it a a worksheet to test themselves on their knowledge and identify gaps in knowledge.

AQA GCSE Design and Technology - Knowledge Organiser for Designing and Making Knowledge Organiser containing all of the key words needed in Designing and Making, in preparation for the AQA GCSE Design and Technology exam and Non-Exam Assessment. The sections in this knowledge organiser are aligned with the sections in the AQA GCSE Design and Technology revision guide by CGP Books. This knowledge organiser is particularly effective when used in combination with our other theory resources to be found in our store. Knowledge organisers are also available for all theory sections (Sections 1-5).

AQA GCSE Design and Technology - Knowledge Organiser for Section 4 - Paper and Board Knowledge Organiser containing all of the key words needed in Section 4 - Paper and Board, in preparation for the AQA GCSE Design and Technology exam. The sections in this knowledge organiser are aligned with the sections in the AQA GCSE Design and Technology revision guide by CGP Books. This knowledge organiser is particularly effective when used in combination with our other theory resources to be found in our store. Knowledge organisers are also available for all other sections (Sections 1-5). Suggestions for use: Print out the knowledge organisers as a booklet for your GCSE students. You may also consider creating a version with the descriptions in blank, so that students can use it a a worksheet to test themselves on their knowledge and identify gaps in knowledge.

AQA GCSE Design and Technology (DT) - Designing and Making - Drawing Techniques This resource contains all of the key knowledge that the students are required to know for Designing and Making - Drawing Techniques Freehand Sketching Perspective Drawing Orthographic Drawing Isometric Drawing System Diagram Schematic Diagram Scale Drawing Exploded Diagram The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students clarity and confidence in preparation for both the NEA and the written exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with the tracker (available for free) designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity, *(particularly effective when used with the tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enhanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on the tracker (available for free). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE Design and Technology (DT) - Designing and Making - Manufacturing Specification This resource contains all of the key knowledge that the students are required to know for Designing and Making - Manufacturing Specification Manufacturing Specification Costing Quality Control Flowcharts Flowchart Symbols Gantt Charts The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students clarity and confidence in preparation for both the NEA and the written exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with the tracker (available for free) designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity, *(particularly effective when used with the tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enhanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on the tracker (available for free). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE Design and Technology (DT) - Exam Theory - Section 1.1 (Technology in Manufacturing) This resource contains all of the key knowledge that the students are required to know for Section 1.1 - Technology in Manufacturing System Input, Process, Output Smart Technology Internet of Things Automation Tracking Communication Systems Specialised Buildings Flexible manufacturing Systems Lean Manufacturing Just in Time Manufacturing The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students absolute clarity when progressing through the theory required for the exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with a tracker designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity *(particularly effective when used with a tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enchanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (Available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on your tracker (which I recommend you set up, student names down the side, sub-sections along the top). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE Design and Technology - Knowledge Organiser for Section 1 - Key Ideas in Design and Technology Knowledge Organiser containing all of the key words needed in Section 1 - Key Ideas in Design and Technology, in preparation for the AQA GCSE Design and Technology exam. The sections in this knowledge organiser are aligned with the sections in the AQA GCSE Design and Technology revision guide by CGP Books. This knowledge organiser is particularly effective when used in combination with our other theory resources to be found in our store. Knowledge organisers are also available for all other sections (Sections 1-5). Suggestions for use: Print out the knowledge organisers as a booklet for your GCSE students. You may also consider creating a version with the descriptions in blank, so that students can use it a a worksheet to test themselves on their knowledge and identify gaps in knowledge.

AQA GCSE Design and Technology - Knowledge Organiser for Section 2 - An Introduction to Materials and Systems Knowledge Organiser containing all of the key words needed in Section 2 - An Introduction to Materials and Systems, in preparation for the AQA GCSE Design and Technology exam. The sections in this knowledge organiser are aligned with the sections in the AQA GCSE Design and Technology revision guide by CGP Books. This knowledge organiser is particularly effective when used in combination with our other theory resources to be found in our store. Knowledge organisers are also available for all other sections (Sections 1-5). Suggestions for use: Print out the knowledge organisers as a booklet for your GCSE students. You may also consider creating a version with the descriptions in blank, so that students can use it a a worksheet to test themselves on their knowledge and identify gaps in knowledge.

AQA GCSE Design and Technology - Knowledge Organiser for Section 3 - More about Materials Knowledge Organiser containing all of the key words needed in Section 3 - More about Materials, in preparation for the AQA GCSE Design and Technology exam. The sections in this knowledge organiser are aligned with the sections in the AQA GCSE Design and Technology revision guide by CGP Books. This knowledge organiser is particularly effective when used in combination with our other theory resources to be found in our store. Knowledge organisers are also available for all other sections (Sections 1-5). Suggestions for use: Print out the knowledge organisers as a booklet for your GCSE students. You may also consider creating a version with the descriptions in blank, so that students can use it a a worksheet to test themselves on their knowledge and identify gaps in knowledge.

AQA GCSE Design and Technology (DT) - Designing and Making - Design Strategies This resource contains all of the key knowledge that the students are required to know for Designing and Making - Design Strategies Systems Approach User-Centred Design Iterative Design Collaboration Client Involvement User Involvement Expert Opinion Modelling The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students clarity and confidence in preparation for both the NEA and the written exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with the tracker (available for free) designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity, *(particularly effective when used with the tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enhanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on the tracker (available for free). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE Design and Technology (DT) - Exam Theory - Section 1.3 - Sustainability Free tracker available to be used alongside theory resources https://www.tes.com/teaching-resource/aqa-gcse-dt-theory-tracker-12190083 This resource contains all of the key knowledge that the students are required to know for Section 1.3 - Sustainability Sustainability Finite Materials Non-Finite Materials Carbon Footprint Product Lifecycle Greenhouse Gases Global Warming Obsolete Planned Obsolescence Modular Electronics Durability The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students absolute clarity when progressing through the theory required for the exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with a tracker designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity *(particularly effective when used with a tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enchanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (Available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on the tracker. The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE Design and Technology (DT) - Designing and Making - Design Briefs and Specifications This resource contains all of the key knowledge that the students are required to know for Designing and Making - Design Briefs and Specifications Design Brief Research Types Market Research Product Analysis Research Analysis Design Specification The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students clarity and confidence in preparation for both the NEA and the written exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with the tracker (available for free) designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity, *(particularly effective when used with the tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enhanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on the tracker (available for free). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE Design and Technology (DT) - Designing and Making - Product Analysis This resource contains all of the key knowledge that the students are required to know for Designing and Making - Product Analysis Product Analysis Analysis Categories Material Impact Analysis Analysis of Processes Social Impact Fair Trade The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students clarity and confidence in preparation for both the NEA and the written exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with the tracker (available for free) designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity, *(particularly effective when used with the tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enhanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on the tracker (available for free). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE Design and Technology (DT) - Exam Theory - Section 2.4 - Textiles This resource contains all of the key knowledge that the students are required to know for Section 2.4 - Textiles Natural Fibres Renewable Resources Biodegradable Cotton Wool Silk Synthetic Fibres Elastane Polyester Polyamide Renewable Resources Biodegradable Yarn Thread Fabric Woven Knitted The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students absolute clarity when progressing through the theory required for the exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with a tracker designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity *(particularly effective when used with a tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enchanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (Available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on your tracker (which I recommend you set up, student names down the side, sub-sections along the top). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE Design and Technology (DT) - Exam Theory - Section 5.2 - Stock Forms and Standard Components This resource contains all of the key knowledge that the students are required to know for Section 5.2 - Stock Forms and Standard Components Timber Stock Forms Planed Square Edge Rough Sawn Mouldings Boards Metal Stock Forms Rod Sheet Tube Strip I-Section Polymer Stock Forms Ready to Use (rods, sheets, tubes) Foam Films Granules Powder Standard Components Temporary Fixings The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students absolute clarity when progressing through the theory required for the exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with a tracker designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity *(particularly effective when used with a tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enchanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (Available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on your tracker (which I recommend you set up, student names down the side, sub-sections along the top). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course

AQA GCSE Design and Technology (DT) - Designing and Making - Market Research This resource contains all of the key knowledge that the students are required to know for Designing and Making - Market Research Market Research Target Market Questionnaires Open/Closed Questions Interviews Focus Groups The sections in these resources align with the sections in the AQA DT revision guide by CGP Books, which gives students clarity and confidence in preparation for both the NEA and the written exam. These resources have been developed with the following goals in mind: Allows learners to work through the theory independently, promoting challenge for all learners and ability levels Disruptive students have less effect on the progress of the learners, as the resources encourage independent learning. Promotes a love of learning, as learners self-motivate. This is particularly effective when the series of resources is used in combination with the tracker (available for free) designed to show learners their progress through the resources. Allows independent home learning to be set that follows on and links clearly with the classwork. Ensures that students have covered all theory required for the exam, with absolute clarity, *(particularly effective when used with the tracker) Suggested strategy: This resource is one sub-section. When used as a complete section the following strategy can be adopted: Begin the lesson by discussion of key words and ideas required in this sub-section. This can be enhanced with related videos from sites such as YouTube. Encourage students to independently research each concept they come across in the activity by using the internet, CGP revision guide, knowledge organiser (available seperately), peer discussion, teacher discussion etc. At the end of each resource there are exam-style questions to prepare students for how the knowledge may need to be applied in the exam. When the sub-section is complete, students get this checked by the teacher and marked off on the tracker (available for free). The student can then move on to the next sub-section at their own pace, or if you wish to keep the class at the same point, they can act as consultants for the other students in the class, further cementing their knowledge. These resources have been tested, developed and implemented across our academy and have had a drastic impact on student preparedness for the exam, exam results, and student engagement with the course. The resources can also be used at KS3 in preparation for the GCSE course