This lesson describes the meaning of the terms stroke volume and heart rate and explains how to use them to calculate the cardiac output. The PowerPoint and accompanying resources have been designed to cover the content of specification point 8.12 of the Edexcel GCSE Biology & Combined Science specifications. The lesson begins by challenging the students to use their knowledge of the structure of the heart chambers to identify the one which has the most muscular wall. Their discussions should lead to the left ventricle and following the introduction of the key term stroke volume using a quick quiz competition, they will learn that this factor is the volume of blood pumped out of the left ventricle each heart beat. Another competition introduces the normative values for stroke volume and the resting heart rate and then the students are challenged to use the provided equation to calculate the cardiac output and to write a definition for this factor using their current understanding. The remainder of the lesson considers how these three factors change during exercise and they are challenged to apply their understanding through a series of exam questions. This worksheet is differentiated two ways and the mark scheme is embedded into the PowerPoint to allow the students to assess their progress.

This lesson describes the role of meiotic cell division, including a detailed explanation of how 4 genetically unidentical daughter cells are formed. The PowerPoint and accompanying resources have been designed to cover point 3.3 of the Edexcel GCSE Biology and Combined Science specifications. The students covered the mitotic cell cycle in topic 2 and their knowledge of this type of cell division is utilised throughout the lesson to help with the understanding of this cycle. The lesson begins by challenging the students to recall the meaning of diploid and they will learn that the parent cell at the start of the meiotic cell cycle is a diploid cell. Time is taken to remind them of the events of interphase and then the lessons focuses on the 2 sets of division in meiosis which produces four haploid daughter cells. The identity of these cells as gametes is emphasised. The final part of the lesson uses a series of exam questions to challenge the students on their understanding of the cycle and the mark schemes are embedded into the PowerPoint to allow the students to assess their progress.

This lesson uses step by step guides to describe how to calculate the surface area to volume ratio. The PowerPoint and accompanying resources are part of the first lesson in a series of 2 lessons which have been designed to cover the detail of points 8.2 and 8.3 of the Edexcel GCSE Biology & Combined Science specifications. The calculation of the SA/V ratio can be an area of the course that students find difficult so this lesson breaks the calculation into parts to guide them through each step. The students are shown how to calculate the surface area, then the volume and then how to express the answer of the division calculation as a ratio against 1. After each step, the students are given the opportunity to apply their understanding and all questions have mark schemes with full workings embedded into the PowerPoint to allow the students to self-assess. Students also tend to struggle to see the relevance to Biology so the remainder of the lesson involves the calculation of the ratio for the alveoli in the human body. Students will discover that the surface area to volume ratio is significantly increased in these gas exchange surfaces which leads into the upcoming lesson on the adaptations of the alveoli to overcome the overall low ratio in larger organisms.

This lesson explains how the complete combustion of hydrocarbons produces carbon dioxide and water and explains how write equations to represent these reactions. The PowerPoint and accompanying resources are part of the second lesson in a series of 2 which have been designed to cover the detail in point 7.1.3 of the AQA GCSE Chemistry & Combined Science specifications. As shown in the cover picture, the lesson starts with a challenge where the students have to recognise the key term combustion from its suffix and a brief definition. Moving forwards, students will discover that the combustion of hydrocarbons releases energy and during this reaction, the carbon and hydrogen are oxidised. Time is taken to emphasise that sufficient oxygen needs to be present for complete combustion to occur and that if the supply is plentiful then carbon dioxide and water will be produced. The main part of the lesson uses a step by step guide to show students how to write word equations and balanced symbol equations for these reactions, before they are challenged to apply their understanding to write their own. All of the exam questions have mark schemes embedded into the PowerPoint to allow the students to self-assess. The final part of the lesson uses an internet article about carbon monoxide poisoning to introduce that this toxic gas can be produced when oxygen is insufficient.

This fully-resourced lesson describes the principles and limitations of optical, transmission electron and scanning electron microscopes. The engaging PowerPoint and accompanying resources have been designed to cover the specification details at the start of topic 2.1.3 of the AQA A-level Biology course and also explains the difference between magnification and resolution. When designing all four of the lessons to cover the detail of 2.1.3, I was conscious that microscopes and the methods of studying cells is a topic that doesn’t always attract the full attention of the students. In line with this, I aimed to plan lessons that encouraged engagement so that the likelihood of knowledge retention and understanding was increased. An ongoing quiz competition runs across the 4 lessons and in this particular lesson, rounds such as YOU DO THE MATH and IT’S TIME FOR ACTION will introduce key terms and values in a fun and memorable way. Time is taken to look at the key details of each of the types of microscope and students will be able to describe how light or the transmission of electrons through or across a specimen will form an image. Students will come to recognise the difference between magnification and resolution and examples are provided and exam-style questions used to check on understanding. As well as current understanding checks, prior knowledge checks challenge the students to make links to other biological topics which include specialised cells and tissues, cell structures and biological molecules. As detailed above, this lesson has been written to be the first in a series of 4 lessons and the others, which are uploaded are: Measuring the size of an object viewed under an optical microscope Use of the magnification formula Cell fractionation and ultracentrifugation

This lesson describes the size and mass of atoms and describes the relative mass and electrical charge of the subatomic particles. The PowerPoint and accompanying resources are part of the first lesson in a series of 3 that has been designed to cover specification points 1.1.4 - 1.1.6 of the AQA GCSE Chemistry & Combined Science specifications. The lesson begins by introducing giga as a prefix of size and this leads into a task where the students have to order the other prefixes from largest to smallest. This introduces the nanometre and students will learn the size of the radius of an atom is 0.1nm. Time is taken to compare this size against that of a football and a human egg cell to try to put this atom radius into context. Moving forwards, the term “subatomic particles” is introduced and the students are challenged to recall the names of the three types along with their location within the atom from their lessons on the development of the atomic model earlier in topic 1. They are told that most of atom’s mass is in the nucleus and therefore can work out the protons and neutrons have much higher relative masses than electrons. They will also learn the relative electrical charges of the particles and are challenged to use this to state the overall charge of an atom and the nucleus. There is a considerable amount of Maths written into this lesson including the use of standard form and conversion between units and step by step guides are used to support the students with this work

This lesson explains the meaning of 11 key terms associated with the genetic inheritance topic and challenges the students to use them in context. The PowerPoint and accompanying resources have been designed to cover point 6.1.6 of the AQA GCSE Biology specification and include explanations of genome, chromosome, gene, allele, genotype, homozygous, heterozygous, phenotype, dominant, recessive and gamete. The key term, genome, was met earlier in topic 6 so the lesson begins with a knowledge retrieval with the definition for this term. As the genome is the entire DNA of an organism, the next task challenges the students to identify three errors in a passage about DNA. This leads into discussions about chromosomes and genes and time is taken to explain that homologous chromosomes have the same genes at the exact same gene loci. The students will learn that alternative forms of the gene (alleles) can be found at these loci and that these structures explain the differences in inherited characteristics. Moving forwards, the main section of the lesson describes the link between the dominant and recessive alleles, homozygous and heterozygous genotypes, and the physical expression as the phenotype. The final key term is gamete, and the students are challenged to recognise a definition for this term using their knowledge of meiosis. Two progress and understanding checks complete the lesson and check on the students’ ability to recognise and write definitions for these 11 terms and to use them accurately in a written description

This lesson describes the biuret test for proteins and then uses a range of activities to challenge the students on their knowledge of topic 1.4.1. The engaging PowerPoint and accompanying resources are part of the last lesson in a series of 3 lessons which have been designed to cover the content detailed in topic 1.4.1 (General properties of proteins) of the AQA A-level Biology specification. The first section of the lesson describes the steps in the biuret test and challenges the students on their recall of the reducing sugars and starch tests from topic 1.2 to recognise that this is a qualitative test that begins with the sample being in solution. The students will learn that the addition of sodium hydroxide and then copper sulphate will result in a colour change from light blue to lilac if a protein is present. The remainder of the lesson uses exam-style questions with displayed mark schemes, understanding checks and quick quiz competitions to engage and motivate the students whilst they assess their understanding of this topic. The following concepts are tested during this lesson: The general structure of an amino acid The formation of dipeptides and polypeptides through condensation reactions The primary, secondary, tertiary and quaternary structure of a protein Biological examples of proteins and their specific actions (e.g. antibodies, enzymes, peptide hormones)

This lesson describes how to investigate the distribution and abundance of organisms and how to estimate the numbers of a species in a habitat. The PowerPoint and accompanying resources are part of the first lesson in a series of two lessons which have been designed to cover the details of point B6.1a of the OCR GCSE Biology specification. This first lesson focuses on the use of a quadrat to estimate population size as well as belt transects to consider distribution. Step by step guides are used throughout the lesson to model the workings required in the calculations. This includes the use of a 1 metre squared quadrat as well as other areas. Once a method has been modelled, the students are challenged with a series of exam questions and mark schemes are embedded into the PowerPoint to allow the students to self-assess.

This fully-resourced lesson describes the processes of active transport, endocytosis and exocytosis and explains the need for ATP. The PowerPoint and accompanying worksheets have been designed to cover the second part of point 4.2 (a) of the CIE International A-level Biology specification. The first part of 4.2 (a), concerning simple and facilitated diffusion, was covered in the previous lesson. The start of the lesson challenges the students to use their prior knowledge of biological molecules to come up with the abbreviation ATP and they will learn that this is a phosphorylated nucleotide that contains adenine, ribose and three phosphate groups. Students may not have known this as the energy currency from GCSE so time is taken to explain that this molecule must be broken down to release energy and students are challenged to recall which type of reaction will be involved and to predict the products of such a reaction. This hydrolysis of ATP can be coupled to energy-requiring reactions within the cell and the rest of the lesson focuses on the use of this energy for active transport, endocytosis and exocytosis. Students are challenged to answer a series of questions which compare active transport against the forms of passive transport and to use data from a bar chart to support this form of transport. In answering these questions they will discover that carrier proteins are specific to certain molecules and time is taken to look at the exact mechanism of these transmembrane proteins. A quick quiz round introduces endocytosis and the students will see how vesicles are involved along with the energy source of ATP to move large substances in or out of the cell. The lesson concludes with a link to a future topic as the students are shown how exocytosis is involved in a synapse.

This fully-resourced lesson explores how pyruvate can be converted to lactate or ethanol using reduced NAD and that the reoxidation of the coenzyme allows glycolysis to continue. The engaging and detailed PowerPoint and accompanying differentiated resources have been designed to cover the third part of point 5.2 of the AQA A-level Biology specification which states that students should know the fate of pyruvate if respiration is only anaerobic. The lesson begins with a focus on the coenzyme, NAD, and students are challenged to recall details of its role in the oxidation of triose phosphate. Students will learn that oxidative phosphorylation in aerobic respiration allows these coenzymes to be reoxidised but that another metabolic pathway has to operate when there is no oxygen. Time is taken to go through the lactate and ethanol fermentation pathways and students are encouraged to discuss the conversions before applying their knowledge to complete diagrams and passages about the pathways. Understanding checks in a range of forms are used to enable the students to assess their progress whilst prior knowledge checks allow them to recognise the links to earlier topics. This lesson has been written to tie in with the other uploaded lesson on glycolysis

This lesson has been designed to cover the detail of specification point 4.5.3.2 of the AQA GCSE Combined Science FOUNDATION TIER which states that students should be able to describe how the body detects and responds to an increase in blood glucose concentration. A considerable amount of time has been taken in the planning to ensure that the wide range of activities engages and motivates the students but that the key details are covered and understanding is checked and checked again. The start of the lesson uses a range of prior knowledge checks and quiz competitions to answer the questions of what actually is glucose and why is it so important that the levels in the blood are controlled. Students are then introduced to glycogen and the fact that this carbohydrate can be stored is reiterated so that they can recognise how glucose must be converted into this substance to lower the blood concentration. Again, a quiz round is used to get them to recall that the pancreas will be the receptor and the liver will act as the effector. The main task of the lesson involves the formation of a bullet point answer where students are challenged to use the information from earlier in the lesson to complete this description.

This fully-resourced lesson describes the differences between continuous and discontinuous variation. The engaging PowerPoint and accompanying resources have been designed to cover point 17.1 (a) of the CIE A-level Biology specification but also acts as a revision of topic 16 as it challenges students on their knowledge of gene mutations and meiosis. The students begin the lesson by having to identify phenotype and species from their respective definitions so that a discussion can be encouraged where they will recognise that phenotypic variation within a species is due to both genetic and environmental factors. The main part of the the lesson focuses on these genetic factors, and describes how mutation and the events of meiosis contribute to this variation. A range of activities, which include exam-style questions and quick quiz rounds, are used to challenge the students on their knowledge and understanding of substitution mutations, deletions, insertions, the genetic code, crossing over and independent assortment. Moving forwards, the concept of multiple alleles is introduced and students will learn how the presence of more than 2 alleles at a locus increases the number of phenotypic variants. Another quick quiz round is used to introduce polygenic inheritance and the link is made between this inheritance of genes at a number of loci as an example of continuous variation. In line with the title of the lesson, the next task challenges them to recognise descriptions and examples which apply to the different types of variations. The final part of the lesson introduces a few examples where environmental factors affect phenotype, such as chlorosis in plants, so that students are prepared for the following lesson.

A fully resourced revision lesson which uses a range of exam questions (with explained answers), quick tasks and quiz competitions to enable the students to assess their understanding of the topics found within module 6.1 (Cellular control) of the OCR A-level Biology specification. The topics tested within this lesson include: Gene mutations Regulation of gene expression The Lac Operon Student will enjoy the range of tasks and quiz rounds whilst crucially being able to recognise any areas which require further attention

This is a detailed and engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 1 (Forces and motion) of the Pearson Edexcel IGCSE Physics 9-1 specification (4PH1) for first assessment in June 2019. The specification points that are covered in this revision lesson include: Know and use the relationship between average speed, distance moved and time taken Know and use the relationship between acceleration, change in velocity and time taken Plot and explain velocity-time graphs Determine the distance travelled from the area between a velocity−time graph and the time axis Use the relationship between final speed, initial speed, acceleration and distance moved Understand how vector quantities differ from scalar quantities Understand that force is a vector quantity Know that friction is a force that opposes motion Know and use the relationship between unbalanced force, mass and acceleration Know and use the relationship between weight, mass and gravitational field strength Know that the stopping distance of a vehicle is made up of the sum of the thinking distance and the braking distance Describe the factors affecting vehicle stopping distance, including speed, mass, road condition and reaction time Know and use the relationship between momentum, mass and velocity Use the idea of momentum to explain safety features Use the conservation of momentum to calculate the mass, velocity or momentum of objects Use the relationship between force, change in momentum and time taken Demonstrate an understanding of Newton’s third law Know and use the relationship between the moment of a force and its perpendicular distance from the pivot The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Fill the VOID” where they have to compete to be the 1st to complete one of the know and use equations whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual International GCSE exams

This fully-resourced lesson explores how genetic and environmental factors cause phenotypic variation. The engaging PowerPoint and accompanying worksheets have been designed to cover the first part of point 7.3 of the AQA A-level Biology specification which states that students should be able to describe how mutations and meiosis both contribute to genetic variation Students are challenged at the start of the lesson to recognise the terms phenotype and species from their definitions in order to begin a discussion on the causes of the phenotypic variation within a species. Moving forwards, students will recall that mutations are the primary source of genetic variation and time is taken to look at the effect of gene and chromosome mutations. Just like the majority of parts of this specification point, gene mutations were covered earlier in topic 4 so these tasks act as a prior knowledge check as students have to recognise the different types of gene mutations and explain their effects on the primary structure with reference to the genetic code. These prior knowledge checks are found throughout the lesson and challenge the knowledge of other topics that include photosynthesis, meiosis and inorganic ions. The karyotype of an individual who has Down syndrome is used to introduce chromosome mutations and students will be introduced to the different types, with a focus on non-disjunction. The key events of meiosis that produce variation (crossing over and independent assortment) are explored and students will be given a mathematical formula to use to calculate the number of chromosome combinations in gametes and in the resulting zygote. The final part of the lesson looks at chlorosis and how an environmental factor can prevent the express of a gene.

This fully-resourced revision lesson has been designed to engage and motivate the students whilst they assess their understanding of the content in topic 7 (Astronomy) of the Pearson Edexcel GCSE Physics specification. The lesson has been written to include as many of the specification points as possible but the following have been given particular attention: Explain how the value of g differs between the Earth’s surface and the surface of other bodies in space Recall the bodies that are found in our Solar system Recall the names and order of the eight planets Describe evidence supporting the Big Bang theory Describe that there will be a change in the frequency and wavelength of a wave if the source of the wave is moving in relation to the observer Describe why the red-shift of galaxies provides evidence for the expansion of the Universe Describe the evolution of stars of similar mass to our Sun Describe the evolution of stars with a larger mass than our Sun This topic contains a number of principles or theories which can be poorly understood by students so extra time has been taken to guide them in the formation of descriptions and explanations.

This fully-resourced lesson has been designed to cover the content of specification point 5.3.3 (Maintaining water and nitrogen balance in the body) as found in topic 5 of the AQA GCSE Biology specification. This resource contains an engaging and detailed PowerPoint (59 slides) and accompanying worksheets, which have been differentiated so that students of different abilities can access the work. The detail of the content and this resource means that it is likely to take more than 1 lesson to go through the tasks. The resource is filled with a wide range of activities, each of which has been designed to engage and motivate the students whilst ensuring that the key Biological content is covered in good detail. Understanding checks are included throughout so that the students can assess their grasp of the content. In addition, prior knowledge checks make links to content from earlier topics such as homeostasis, osmosis and active transport. The following content is covered in this lesson: The importance of controlled water levels for cellular function The ways that water is lost and removed from the body The formation of urea by deamination Filtration of the blood by the kidney Selective reabsorption of useful molecules from the kidney to the blood The effect of ADH on the permeability of the tubules of the kidney Dialysis and transplant as possible treatment options for kidney failure As stated at the top, this lesson has been designed for GCSE-aged students who are studying the AQA GCSE Biology course, but it can be used with A-level students who need to go back over the key points before looking at the function of the nephron in more detail

This detailed and engaging lesson has been written to challenge the students on their recall and application of the 23 equations which they have to know for the AQA GCSE Physics exams. The lesson is designed to not only check that they know these equations but also on their ability to rearrange formulae when required and to convert between units. The main task of the lesson consists of 13 exam-style questions which challenge 12 of these recall equations and then an engaging quiz competition and class discussions are used to identify the other 11. Students are guided throughout the lesson in the use of the mathematical skills and are shown examples to aid their progress. This lesson has been designed to tie in with the other 8 uploaded revision lessons which cover the content of the 8 topics on the AQA GCSE Physics specification

This REVISION resource has been designed to motivate and engage students whilst they are challenged on their knowledge of the content in topics C6-C10 of the AQA GCSE Chemistry specification which can be assessed on PAPER 2. This is fully-resourced and contains a detailed PowerPoint (146 slides) and accompanying worksheets, some of which have been differentiated. The resource was written with the aim of covering as many of the sub-topics in C6-C10 as possible, but the following ones have been given a particular focus: The general formulae of the alkanes, alkenes, alcohols and carboxylic acids Reversible reactions and equilibrium Changing conditions and the position of equilibrium The factors affecting the rate of reaction Complete combustion of the alkanes and climate change The changes in carbon dioxide levels over time Addition and condensation polymers Fractional distillation and the properties of the fractions Analysis and interpreting chromatograms Detecting cations This lesson can be used in combination with the PAPER 1 REVISION resource that I have uploaded.