This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical changes, electrolysis and energy changes’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first task is a recap on the differences between endothermic and exothermic reactions, students will need to complete a fill-in-the blank task which can then be self-assessed using the answers provided. Next, students are introduced to reaction profiles with a diagram to demonstrate what is happening during an exothermic chemical reaction. Students will then be asked to use mini-whiteboards to draw a reaction profile for an endothermic reaction, they can check their ideas using the answer provided in the PowerPoint. The next slide shows the reaction profiles for both an endothermic and exothermic reaction, as well as an explanation of the energy changes which take place during these types of reaction. Pupils can take notes from this slide, including sketching a diagram of the two reaction profiles. The next task is for pupils to complete is a progress check to assess their understanding of what they have learned so far, once complete pupils can self-assess or peer-assess their work using the answers provided. Next, pupils will watch a video on activation energy, they will need to answer a set of questions using the information provided in the video. Pupils can self-assess their work using the mark scheme provided in the PowerPoint. The next part of the lesson focuses on bond breaking/making and bond energies. Firstly, students are shown (using a diagram to demonstrate) what happens, in terms of energy changes, when bonds are broken or when bonds form during a chemical reaction. Students can then summarise what they have learnt so far by completing a fill-in-the-blank task, this task can be self-assessed using the mark scheme provided. Lastly, students are introduced to bond energies and are shown how to calculate the energy change for a chemical reaction using a worked example. Students will then need to complete a worksheet on bond energy calculations. The mark scheme for the worksheet is included in the PowerPoint for pupils to self-assess or peer-assess their work. The plenary task requires pupils to identify a WWW and EBI from the lesson, listing what went well/what they have fully understood and what they could do better next time. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Organic Chemistry’ SoW. Firstly, pupils will need to complete a ‘True or False’ activity on carbohydrates, they will then be shown how polysaccharides are made from monosaccharides via a condensation reaction, as an example of a natural polymer. Pupils will also be provided with information on the structure of starch and glycogen ad how this relates to the function of these two polymers. Another example of a natural polymer are polypeptides/proteins which are made up of the monomers - amino acids. Again, pupils will be shown how a condensation reaction occurs to link together many amino acids molecules in a long polypeptide chain. Pupils will now complete a ‘Quick Check’ task to test their knowledge of what they learned so far this lesson, the answers to the questions will be provided in the PowerPoint for students to assess their own work. The next part of the lesson will focus on DNA as a natural polymer. Firstly, pupils will need to order the structures given in order of size - DNA, gene, chromosome, nucleus, cell. Next, pupils will watch a video on the structure and function of DNA and will need to answer a set of questions. This work can then be self-assessed using the answers provided in the PowerPoint. A diagram is then shown highlighting some of the key structural features of a double-helix DNA molecule, which pupils need to know and remember. The final task is a ‘Quick Check’ activity on the structure & function of DNA, students will need to answer the questions in their books and then peer or self-assess their work using the mark scheme provided. The plenary task is for pupils to write three quiz questions for pupils to test their peers knowledge of the topic learned in the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

PowerPoint and task cards aimed at a KS3 class (initially planned for Year 9) to complete a poster, written assignment and a model for a specific area of Science to present in a Science Fair. For each of the task cards a detailed list of requirements for each part of the project is included, with ideas for extension work to earn more points and homework ideas as well. I used this resource straight after my students had completed their end of year test as a fun and engaging activity, when complete pupils presented their projects to the class and I awarded certificates for best written assignment, best poster, best model and best overall project.

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical Analysis’ SoW. The lesson begins with a ‘Think > Pair > Share’ task where students are required to discuss sectors which must reply upon efficient and effective instrumental methods of chemical analysis. After a short class discussion, the teacher can discuss the importance of instrumental analysis for environmental and health care sectors. Students will now be shown the difference between qualitative and quantitative methods of chemical analysis. They will then be given a set of statements, students will need to sort these statements into either advantages of disadvantages of instrumental methods of chemical analysis vs. traditional methods. Pupils will need to self-assess their work using the answers provided in the PowerPoint. Next, students will watch a video on flame emission spectroscopy and will need to use information provided in the PowerPoint to answer a set of questions. This work can be self-assessed using the answers provided. Following this, students will be provided with a set of information about this process, they will need to use this information to answer a set of questions. Their answers to these questions can be self-assessed using the mark scheme provided. Lastly, pupils will be shown a diagram showing the results of flame emission spectroscopy tests for different metals. The plenary task requires pupils to write a Whatsapp message about what they have learned during the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical changes, electrolysis and energy changes’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students will firstly be shown a set of images, students will have to decide which are examples of an alkali/base and which are examples of acids. Next, students will watch a video on acids/alkalis and will need to answer a set of questions, after which they can self-assess their work using the mark scheme provided. The next part of the lesson focuses on pH, students are firstly reminded of the importance of the pH scale and will then need to complete an investigation to identify the pH of different substances. Students can use the practical sheet provided to complete this task, including the results table to record their results. The next part of the lesson looks at the difference between concentrated and dilute solutions, in terms of particles and in terms of risk/hazards when handling concentrated acids. Students will then need to summarise what they have learned with a fill-in-the-blank task, this work can be self-assessed using the mark scheme provided. The final part of the lesson pupils will focus on the difference between strong and weak acids in terms of ionisation. Students will also look at how pH values are related to the concentration of H+ ions, students will need to copy and complete a table to show the concentration of H+ ions per mol dm3 for each pH value, this work can then be self-assessed using the mark scheme provided. The plenary task is a ‘Pick a plenary’ task - pupils will need to either write a twitter message to summarise what they have learnt or write 5 quiz questions on the topics studied in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA GCSE Trilogy Chemistry GCSE, particularly the ‘Using our Resources’ scheme of work.

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Firstly, students are shown how to ammonia produced in the Haber process is reacted with different acids to form different ammonium compounds before being used in fertilisers. Firstly, students will investigate how to produce ammonium sulphate in the lab - they will be provided with a practical worksheet which they will need to work their way through in pairs. This involves a titration, which they should have carried out before, their results can be recorded in the table provided on the worksheet. Next, pupils will watch a video on the production and use of fertilisers - using the information provided int he video a set of questions needs to be answered. This work can then be self-assessed using the mark scheme provided. Lastly, pupils will be given a set of information about how fertilisers are made in the lab compared to being made by chemical industry. Using this information students will need to complete a comparison table which focuses on starting materials, equipment, safety, yield and running costs. This work can be self-assessed using the mark scheme provided. The plenary task requires pupils to write three quiz questions to test their peers knowledge on what they have learned during the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical Analysis’ SoW. Students are introduced to the idea that scientists are able to conduct quick and simple tests to identify a number of gases - oxygen, carbon dioxide, hydrogen, chlorine. Pupils will now complete a circus of activities, moving around the room to conduct tests for the presence of oxygen, hydrogen and carbon dioxide, recording their results in a table in their books. Pupils will need to watch a teacher demonstration for the test for chlorine, they can also record their observations of this demo in their table of results. Pupils will then be shown a video outlining each of the gas tests, they can watch this to self-assess their answers from the investigations they carried out. Students will now be given a card sort, for each gas - oxygen, carbon dioxide, hydrogen and chlorine - they will need to identify the correct method and correct positive results. They should do this with their books closed so they don’t rely upon the results collected from the last task! Their work can then be self-assessed using the mark scheme provided. The next task is a ‘Quick Check’ activity whereby pupils need to answer a set of questions based upon what they have learned this lesson, the answers to this task is provided in the PowerPoint so students can either self-assess or peer-assess their work. The plenary task is ‘Take a minute’ where students need to spend a minute talking to the person next to them about what they have learned in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical calculations’ SoW and specifically designed for the higher tier GCSE chemistry students. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with students learning how to calculate the number of moles of a gas when you know the molar gas volume. Students will then work their way through a set of questions using this calculation, for latter questions students will need to rearrange the equation. This work can then be assessed using the answers provided in the PowerPoint presentation. The next part of the lesson focuses on calculating the masses of gaseous reactants and products, firstly students are shown a worked example. The next task is for pupils to watch a video, using which they should answer a set of questions. Once this task has been completed students shoudl mark their work using the answers provided. Using the formula they have learnt whilst watching the video, they should now complete a set of questions on a specific chemical reaction - this required students to calculate the volume of gases produced or the mass of a reactant needed to produce a certain amount of a gas product. This work can be self-assessed using the answers provided in the PowerPoint presentation. The next task is a further set of problems requiring students to calculate the volume of gaseous reactants or products given a balanced symbol equation for a chemical reaction. The last task requires pupils to come up with 4 exam questions on the topic of gas volumes, they should also include a mark scheme for each of the questions. Once they have competed their questions they should swap with the person next to them and complete their partners questions, these can be self or peer-assessed using the mark schemes they have written. The plenary task is for pupils to write a WhatsApp message to their friends to tell them what they have learnt about this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Organic Chemistry’ SoW. Students are firstly introduced to the idea of a ‘homologous series’ and look at how this applies to the pattern of formulae for the alkene series. Students are then asked to think about the differences between complete and incomplete combustion from what they have learned in previous lessons, before being shown the differences between complete/incomplete combustion of alkenes and how this explain why alkenes are rarely used as fuels. Next, students will watch a video on the reactions of alkenes with water and with halogens, using the information in the video they will need to answer a set of questions. The answers to this task are provided in the PowerPoint so that students can self-assess their work. Pupils will now be given a set of symbol equations between different alkenes and halogens, pupils will need to complete these calculations in their books, ensuring that they are balanced. Once complete, pupils can self-assess their work. The last part of the lesson focuses on the reaction of alkenes with hydrogen, students will be shown a simple hydrogenation reaction and will also be given some information about hydrogenation and whether it is a good or bad process in the production of margarine spreads from vegetable oils. Students will need to read this information and then answer a set of questions, this work can be self-assessed using the answers provided in the PowerPoint presentation. The plenary task is for pupils to write a Whatsapp message about what they have learned in the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Chemical changes and electrolysis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a diagram to show how chemical cells/batteries work by relying upon the differing reactivity of metals. Students will then watch a video and will need to answer a set of questions using the information provided in the video, students can then self-assess their work using the mark scheme provided in the PowerPoint. Students will now need to complete an investigation into the potential difference produced by different chemical cells by following the instructions on the practical sheet provided. Pupils will need to record the results of their investigation and write a conclusion on the practical worksheet. The next task is a ‘Quick Check’ to assess students understanding of what they have learnt so far this lesson, pupils will need to complete a set of questions and they can then self-assess their work using the answers provided in the PowerPoint. The last part of the lesson will focus on fuel cells, students will watch a video and using the information provided they will need to ask a set of questions. The answers to these questions are included in the PowerPoint, so students can check their work once this task is complete. Finally, students will be given a set of information on hydrogen fuel cells which they can read in pairs. Using this information pupils will need to produce a table to sum the advantages and disadvantages of using hydrogen fuel cells as an energy source. Students can then check their work against answers provided in the PowerPoint. The plenary task is for pupils to summarise what they have learnt this lesson in three sentences, using key words from the list provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the three main acids and their chemical formulae - nitric acid, hydrochloric acid and sulphuric acid - students are asked to identify what the three compounds have in common. Students should hopefully identify that they are contain hydrogen atoms. This then leads onto the next slide where students are introduced to the idea of a salt - the compound which forms when an acid and a metal react together. Students are given some information about this reaction and about salts, using this information students will need to answer some questions. Once this task has been completed, students can self-assess their work using the mark scheme provided. Students will then watch a video of a metal reacting with an acid, whilst students watch this video they are asked to write down any observations they make about the reaction, as well as think about what is happening that we can’t see/hear/feel. Students are now shown the word equation for magnesium metal reacting with hydrochloric acid and zinc metal reacting with hydrochloric acid, students are asked to think about the pattern with the products formed from these reactions. Hopefully, students can identify that a salt + hydrogen is formed in each one. Students are now asked to copy and complete a set of word equations for several more metal + acid reactions. This work can be self-assessed once complete. Next, students will conduct an investigation into how different metals react differently with acids. Students will test five metals - copper, iron, zinc, lead and magnesium - with hydrochloric acid. Hopefully, by completing this investigation they will be able to successfully place the metals in order of reactivity, this can be checked using the answers provided on the PowerPoint. Lastly, students need to be able to describe the test for hydrogen gas. Students will firstly be asked to ‘Think > Pair >Share’ their ideas about how this may be carried out, before watching a video to check whether their ideas were correct. Students can then make a note of this test in their books. The plenary task requires students to write a list of key words which were learned in the lesson today. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a description of the new field of nanoscience and the types of industries where this may be important. Pupils are then given a set of questions which they must complete using a video, once the students have answered the questions they can assess their work using the mark scheme provided. Pupils will now focus on the importance of surface are to volume ratio when considering nanoparticles, students will calculate the surface area to volume ratio of a cube that is 100cm x 100cm, 10cm x 10cm and 1cm x 1cm. By doing this they can see that the smaller the particle the higher the surface area to volume ratio, this is an important property in nanoparticles - particularly for their use as catalysts. Students are then asked to prove that the same applies for a cube that is 10m x 10m and 0.1cm x 0.1cm. All work from these tasks can be self or peer assessed using the answers provided in the PowerPoint presentation. The next part of the lesson is a task for pupils to consider the application of nanotechnology, pupils will each be given a card of information describing one application of nanoparticles. They will need to walk around the room and discuss the applications with each other to complete a table in their books. The last task is for pupils to consider the potential risks involved with the uses of nanoparticles in everyday products, students should think > pair > share their ideas about how the industries using nanoparticles might be posing risks to people and the environment. Once the class has discussed these potential risks you can outline some examples using the PowerPoint presentation. The plenary is for pupils to pick a task, either write a twitter message or summarise what they learnt in the lesson in three sentences. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with an introduction to the Periodic Table, students will be shown a diagram of the Periodic Table and will be asked to identify whether they think certain elements are metals or non-metals, or even semi-metals (metalloids). This task can the be checked and assessed against the answers provided on the PowerPoint. Next, students will be given part of a table of information on the properties of metals compared to non-metals. They will need to walk around the room and trade information with others in order to successfully complete their own table. Once this task has been completed, students can self-assess their work using the mark scheme provided. Students are now shown a diagram of an iron roof and a copper roof and how this can change over time, students are asked to think about what is happening in these picture & try to identify the chemical reaction. After a short class discussion, the answers to the questions will then be revealed. Students will then be told that non-metals react in a similar way with oxygen, they will then be shown 4 incomplete word equations for the reaction of different non-metals with oxygen. Students will need to complete this equation, this task can the self-assessed using the mark scheme provided. The last activity is a true or false activity, students will need to identify whether the statements about metals/non-metals are true or false. This task can the be marked using the mark scheme provided. The plenary task is an exit card, students will need to write down three key words, one fact and a question to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 C1.2 Module on ‘Elements, Atoms & Compounds’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 C1.4 Module on ‘Acids & Alkalis’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 8 B2.1 Module on ‘Separation Techniques’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)