8 Full Lesson Bundle which covers the redox and electrode potential section of the OCR Energy Chapter: Lesson 1 & 2: Redox Reactions Lesson 3& 4: Redox Titrations Lesson 5&6: Standard Electrode & Cell Potentials Lesson 7: Limitations of Cell Potentials Lesson 8: Storage & Fuel Cells Learning Objectives: Lesson 1: LO1: To identify the oxidation numbers of elements in ions and compounds LO2: To construct half-equations from redox equations LO3: To explain and use the terms oxidising agent and reducing agent Lesson 2: LO1: To understand that the overall increase in oxidation number will equal the overall decrease in oxidation number LO2: To construct balanced half equations and overall redox equations from reactions in acidic conditions LO3: To construct balanced half equations and overall redox equations from reactions in alkaline conditions (stretch & challenge) Lesson 3: LO1: To understand what a redox titration is. LO2: To describe the practical techniques and procedures used to carry out redox titrations involving Fe2+ /MnO4- LO3: To calculate structured titration questions based on experimental results of redox titrations involving Fe2+ /MnO4- and its derivatives Lesson 4: LO1: To describe the practical techniques and procedures used to carry out redox titrations for I2/S2O32- LO2: To calculate structured titration questions based on experimental results of redox titrations involving I2/S2O32- and non familiar redox systems LO3: To calculate non-structured titration questions based on experimental results of I2/S2O32- Lesson 5: LO1: To describe techniques and procedures used for the measurement of : i) Cell potentials of metals or non-metals in contact with their ions in aqueous solution ii) Ions of the same element in different oxidation states in contact with a Pt electrode Lesson 6: LO1: To use the term standard electrode potential E⦵ including its measurement using a hydrogen electrode LO2: To calculate a standard cell potential by combining two standard electrode potentials LO3: To predict the feasibility of electrode potentials to modern storage cells Lesson 7: LO1. To understand the limitations of predicting the feasibility of a reaction using cell potentials due to kinetics and non-standard conditions LO2. To explain why electrochemical cells may not work based on the limitations of using cell potentials Lesson 8: LO1: To understand the application of the principles of electrode potentials to modern storage cells LO2: To explain that a fuel cell uses the energy from a reaction of a fuel with oxygen to produce a voltage LO3: To derive the reactions that take place at each electrode in a hydrogen fuel cell The teacher will be able to check students have met these learning objectives through starter activities, discussion questions, mini AfL tasks and practice questions for students to complete Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

4 well structured chemistry lessons covering topics in Alkenes (Year 12) suitable for the OCR specification NOTE: If you are also looking for a lesson on stereoisomerism in alkenes , this can also be found in my shop under the title ‘Isomers’ Lesson 1: The Properties of Alkenes To know the general formula of alkenes To explain the shape and bond angle around each carbon atom of a C=C bond To describe how π and σ bonds are formed in alkenes Lesson 2: Addition Reactions of Alkenes To know what an electrophile is To describe what an electrophilic addition reaction is To outline the mechanism for electrophilic addition Lesson 3: Addition Polymerisation To know the repeat unit of an addition polymer deduced from a polymer To identify the monomer that would produce a given section of an addition polymer To construct repeating units based on provided monomers Lesson 4: Dealing with Polymer Waste To understand the benefits for sustainability of processing waste polymers by: i) Combustion for energy production ii) Use as an organic feedstock for the production of plastics and other organic chemicals iii) Removal of toxic waste products such as HCl To understand the benefits to the environment of development of biodegradable and photodegradable polymers Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons including using your own lesson PowerPoints is a fundamental skill of a qualified/unqualified teacher that will be reviewed during these scenarios outlined above

3 structured lessons covering topics from AS Chemistry Alkanes from the OCR Specification Lesson 1: Properties of Alkanes To know alkanes are saturated alkanes containing sigma (σ)bonds that are free to rotate Explain the shape and bond angle round each carbon atom in alkanes in terms of electron pair repulsion Describe and explain the variations in boiling points of alkanes with different carbon chain lengths and branching in terms of London forces Lesson 2: Combustion of Alkanes To understand why alkanes are good fuels To recall the equations (both word and symbol) for complete combustion of alkanes To recall the equations (both word and symbol) for incomplete complete combustion of alkanes Lesson 3: Free Radical Substitution of Alkanes 1)To know what a free radical is 2) To describe the reaction mechanism for the free-radical substitution of alkanes including initiation, propagation and termination 3) To analyse the limitations of radical substitution in synthesis by formation of a mixture of organic products Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

6 Well Structured Lessons + BONUS Required Practical Lesson on Making Salts from the AQA Specification on Chemical Changes. This bundle is suitable for students studying GCSE Chemistry or Higher Tier Combined Science The Following Lessons are included Lesson 1: Reactivity Series and Metal Extraction Deduce an order of reactivity of metals based on experimental results Explain reduction and oxidation by loss or gain of oxygen Explain how the reactivity is related to the tendency of the metal to form its positive ion Lesson 2: Oxidation and Reduction (in terms of electrons) write full ionic equations for displacement reactions Write half equations for displacement reactions identify in a half equation which species are oxidised or reduced Lesson 3: Reactions of Metals and Acid Describe how to make salts from metals and acids Construct word equations from metal and acid reactions Write full balanced symbol equations for making salts Lesson 4: Metal Oxides Identity that metals react with oxygen to form metal oxides Explain reduction and oxidation by loss or gain of oxygen Identify metal oxides as bases or alkalis Lesson 5: pH and Neutralisation State the ionic equation involved in neutralisation reactions Describe the use of a universal indicator to measure pH changes Compare acid strength and concentration Lesson 6: Electrolysis of Ionic Compound Know what electrolysis is and to state its uses Explain how electrolysis works Predict the reactions that occur at each electrode Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

4 structured lessons covering topics from AS Chemistry Alkanes from the AQA Specification Lesson 1: Fractional Distillation of Crude Oil Describe what crude oil contains and to understand its uses Explain how crude oil is separated into useful fractions on an industrial scale Explain how crude oil is separated into useful fractions on an industrial scale Lesson 2: Cracking of Alkanes To describe what cracking is and its economic benefits To explain what thermal and catalytic cracking To compare and evaluate the conditions for and the products of thermal and catalytic cracking Lesson 3: Combustion of Alkanes To understand why alkanes are good fuels To recall the complete and incomplete combustions equations (both word and symbol) of alkanes To explain the environmental problems associated with pollutant products when alkanes are used as fuels To explain the use of catalytic convertors and processes such as flue gas desulfurisation to remove gaseous pollutants produced during alkane combustion Lesson 4: Free Radical Substitution of Alkanes 1)To know what a free radical is 2) To describe the reaction mechanism for the free-radical substitution of alkanes including initiation, propagation and termination 3) To analyse the limitations of radical substitution in synthesis by formation of a mixture of organic products Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

AS Chemistry Bundle on Foundations in Chemistry. Suitable for AQA, OCR and Edexcel The lessons include: Lesson 1: Relative Masses Define the terms relative atomic mass, relative formula mass and relative molecular mass Calculate the relative formula mass and relative molecular mass of compounds and molecules Lesson 2: Ions and the Periodic Table To predict the ionic charge of ions based on the position of the element in the periodic table To recall the names of common atomic and molecular ions To be able write the formula of ionic compounds Lesson 3: The Mole and The Avogadro Constant Know that the Avogadro constant is the number of particles in a mole Calculate the number of moles present in a given mass of an element or compound using the mole equation Rearrange the mole equation to calculate either the number of moles, Mr or mass of an element or compound Lesson 4: Moles and Equations Know how to balance symbol equations Calculate the moles of reactants or products based on chemical equations and mole ratios Calculate the masses of reactants used or products formed based on chemical equations and mole ratios Lesson 5: Ideal Gas Equation Recall the ideal gas equation 2)Understand the properties of an ideal gas Rearrange the ideal gas equation to determine either pressure, temperature, moles or volume Lesson 6: Empirical and Molecular Formulae Understand what is meant by ‘empirical formula’ and ‘molecular formula’ Calculate empirical formula from data giving composition by mass or percentage by mass Calculate molecular formula from the empirical formula and relative molecular mass. Lesson 7: Percentage Yield and Atom Economy Know how to balance symbol equations Calculate atom economy and percentage yield from balanced symbol equations Calculate the masses and moles of products or reactants from balanced symbol equations Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

5 Well Structured GCSE Higher Tier Combined Science Lessons from the AQA Quantitative Chemistry Chapter Lesson 1: Relative Formula Mass To identify the relative atomic mass of an element from the periodic table To be able to define the term relative atomic mass To calculate relative formula masses from atomic masses Lesson 2: Mass Changes in Reactions To relate mass, volume and concentration To calculate the mass of solute in solution To relate concentration in mol/dm3 to mass and volume Lesson 3: Moles Describe the measurement of amounts of substance in moles Calculate the number of moles in a given mass Calculate the mass of a given number of moles Lesson 4: Moles and Equations calculate the masses of substances in a balanced symbol equation calculate the masses of reactants and products from balanced symbol equations calculate the mass of a given reactant or product. Lesson 5: Concentration of Solutions To relate mass, volume and concentration To calculate the mass of solute in solution To relate concentration in mol/dm3 to mass and volume Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

5 Full Lessons on Energetics in AS Level Chemistry. See below for the lesson objectives Lesson 1: Enthalpy and Reactions LO1: To explain that some chemical reactions are accompanied by enthalpy changes that are exothermic or endothermic LO2: To construct enthalpy profile diagrams to show the difference in the enthalpy of reactants compared with products LO3: To qualitatively explain the term activation energy, including use of enthalpy profile diagrams **Lesson 2: Enthalpy Changes ** LO1: To know what standard conditions are LO2:To understand the terms enthalpy change of combustion, neutralisation and formation LO3:To construct balanced symbol equations based on the terms enthalpy change of combustion, neutralisation and formation. Lesson 3: Bond Enthalpies LO1: To explain the term average bond enthalpy LO2:To explain exothermic and endothermic reactions in terms of enthalpy changes associated with the breaking and making of chemical bonds LO3:To apply average bond enthalpies to calculate enthalpy changes and related quantities **Lesson 4: Calorimetry ** LO1:To determine enthalpy changes directly from appropriate experimental results, including use of the relationship q=mcΔT LO2:To know the techniques and procedures used to determine enthalpy changes directly using a coffee cup calorimeter LO3:To know the techniques and procedures used to determine enthalpy changes indirectly using a copper calorimeter **Lesson 5: Hess’ Law & Enthalpy Cycles ** LO1: To state Hess’ Law LO2: To calculate the enthalpy change of a reaction from enthalpy changes of combustion using Hess’ Law LO3:To calculate the enthalpy change of a reaction from enthalpy changes of formation using Hess’ Law Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

Two lesson bundle covering the three types of intermolecular forces for the OCR Specification (but also applicable to AQA and Edexcel specification) Lesson 1: Intermolecular Forces (Part 1) covers London forces and Permanent Dipole-Dipole Interactions. In lesson 1 students will: Understand intermolecular forces based on induced-dipole interactions and permanent dipole-dipole interactions Explain how intermolecular forces are linked to physical properties such as boiling and melting points Compare the solubility of polar and non-polar molecules in polar and non-polar solvents Lesson 2: Intermolecular Forces (part 2) covers Hydrogen Bonding. In lesson 2 students will: Understand hydrogen bonding as intermolecular forces between molecules containing N, O or F and the H atom of –NH, -OH or HF Construct diagrams which illustrate hydrogen bonding Explain the anomalous properties of H2O resulting from hydrogen bonding The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

2 Lesson bundle covering the OCR Periodic Table Chapter on group 2 elements and compounds Lesson 1: Group 2 Elements By the end of this lesson. Students should be able: To know group 2 elements lose their outer shell s2 electrons to form +2 ions To state and explain the trend in first and second ionisation energies of group 2 elements and how this links to their relative reactivities with oxygen, water and dilute acids To construct half equations of redox reactions of group 2 elements with oxygen, water and dilute acids and to identify what species have been oxidised and reduced using oxidation numbers Lesson 2: Group 2 Compounds. By the end of this lesson students should be able: To know the reaction between group 2 metal oxides and water To state the trend in solubility and alkalinity of group 2 metal hydroxides To describe the uses of some group 2 compounds including their equations The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

2 Lesson bundle covering the AS Chemistry topic on Ionisation Energy. Suitable for OCR, AQA and Edexcel Lesson 1: Ionisation Energy (Part 1) Define the term ‘first ionisation energy’ and successive ionisation energies Describe the factors affecting ionisation energy 3)Explain the trend in successive ionisation energies of an element Lesson 2: Ionisation Energy (Part 2) Explain the trend in first ionisation energies down a group Explain the trend in first ionisation energies across period 2 Explain the trend in first ionisation energies across period 3 Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

6 Well Structured GCSE Chemistry Lessons on from the AQA Quantitative Chemistry Chapter Lesson 1: Relative Formula Mass To identify the relative atomic mass of an element from the periodic table To be able to define the term relative atomic mass To calculate relative formula masses from atomic masses Lesson 2: Mass Changes in Reactions To relate mass, volume and concentration To calculate the mass of solute in solution To relate concentration in mol/dm3 to mass and volume Lesson 3: Moles Describe the measurement of amounts of substance in moles Calculate the number of moles in a given mass Calculate the mass of a given number of moles Lesson 4: Moles and Equations calculate the masses of substances in a balanced symbol equation calculate the masses of reactants and products from balanced symbol equations calculate the mass of a given reactant or product. Lesson 5: Percentage Yield & Atom Economy To calculate percentage yield from balanced symbol equations To calculate atom economy from balanced symbol equations To calculate the masses and moles of products or reactants from balanced symbol equations Lesson 6: Concentration of Solutions To relate mass, volume and concentration To calculate the mass of solute in solution To relate concentration in mol/dm3 to mass and volume Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

3 fully planned lessons (including starter questions and main work tasks) covering the AS Chemistry chapter on Redox Reactions; Lesson 1: Oxidation States Lesson 2: Half Equations Lesson 3: Forming Redox Equations By the end of lesson 1 students will: Recall the rules for oxidation states of uncombined elements and elements in compounds Determine the oxidation states of elements in a redox reaction Identify what substance has been reduced or oxidised in a redox reaction By the end of lesson 2 students will: Understand what a half equation is Explain what a redox equation is Construct half equations from redox equations By the end of lesson 3 students will: Identify what substance has been reduced or oxidised in a redox reaction Construct balanced half equations by adding H+ and H2O Construct full ionic redox equations from half equations Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

This discounted bundle includes: A full double lesson on synthetic routes in organic synthesis (all answers included) A follow up homework task (all answers included) A full revision summary of the year 12 & 13 organic reactions (perfect for making flashcards!) The full double lesson will cover the following learning objectives i) To identify individual functional groups for an organic molecule containing several functional groups ii) To predict the properties and reactions of organic molecules containing several functional groups iii) To create multi-stage synthetic routes for preparing organic compounds Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons including using your own lesson PowerPoints is a fundamental skill of a qualified/unqualified teacher that will be reviewed during these scenarios outlined above

2 well structured chemistry lessons, plus a revision summary covering the Year 13 OCR topic of: Organic Synthesis. See below for the lesson objectives and resource description: Lesson 1: Practical Skills in Organic Synthesis (Yr13) To describe the techniques and procedures used for the purification of organic solids including: filtration under reduced pressure recrystallisation measurement of melting points Lesson 2: Synthetic Routes in Organic Synthesis (Y13) To identify individual functional groups for an organic molecule containing several functional groups To predict the properties and reactions of organic molecules containing several functional groups To create multi-stage synthetic routes for preparing organic compounds Synthetic Routes Revision Summary A 14 page summary of all the organic synthesis reactions from the AS and A level OCR Chemistry specification. Students will be able to use this resource directly as part of their revision on organic synthesis/synthetic routes or can make flashcards from them. Reagents and reaction conditions are also included where applicable Reaction summaries include: nucelophilic substitution reactions* elimination reactions* free radical substitution reactions* electrophilic addition reactions* oxidation reactions* reduction reactions* electrophilic substitution reactions* reactions of phenols* carbon-carbon formation reactions* reactions of carboxylic acids* reactions of acyl chlorides* polymerisation reactions* hydrolysis reactions* amine synthesis reactions* Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons including using your own lesson PowerPoints is a fundamental skill of a qualified/unqualified teacher that will be reviewed during these scenarios outlined above