This includes a PowerPoint and detailed lesson plan that includes: Comparison of Alternating and Direct Current Use of oscilloscopes to investigate the AC / DC traces Conversion of frequency to time period for an AC supply National Grid (UK system) Homework ideas and differentiation / extension ideas are included in the step-by-step lesson. This is the seventh lesson in the Electricity unit of work (P2) and would cover about an hour to 90 minutes of teaching including writing up and analysing the oscilloscopes and drawing out the National Grid system.

This lesson covers the Evidence of the Big Bang through inlcluding the calculation of recessional speeds due to the Doppler Effect and an explanation of the Cosmic Microwave Background (CMB). There is a worksheet of questions and answers included in this lesson. This is the sixth and final lesson in this section entitled “Astrophysics” which is available as a bundle in our shop.

This is a 9 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of Momentum This is the third PowerPoint in this section which goes over the basic calculations for two body problems including collisions that stick together, bounce apart, and explosions. This lesson is supported with a set of questions and fully worked answers. This PowerPoint is designed as an animated set of examples of each of the three main types of momentum problems.

iGCSE Physics PowerPoint that covers the topic of Energy including: Energy stores, energy forms, energy transfers, two practical lessons with methods and analysis, conservation of energy, and energy efficiency calculations. This is the first of 6 topics in this units of work and is expected to cover approximately 3 hours of teaching. v1.1 - Added Sankey diagram slide and a second summary slide

This is a 12 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of Fluid Systems. This is an introduction to this topic where the properties of mass, pressure, volume, density and weight are explained. A worksheet of questions and an answer sheet are included. This is the first PowerPoint in this section and includes definitions and worked examples.

iGCSE Physics PowerPoint that covers the topic of Work Done. This 14 page powerpoint explains how frictional forces, including air resistance, needs to be overcome to keep an object moving. This is investigated with two practicals (one looking at surfaces and the second similar / extension practical looking at the effect of changing the weight of the object on friction). Graphing skills with extrapolation are also highlighted. This is the fourth of 6 topics in this units of work and is aimed at covering approximately 2-3 hours of teaching, including the experiments.

This is a 8 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of Immersed Bodies. This covers the calculations of buoyancy for fully and partially submerged objects. This builds on Archimedes’ principle with a mathematical understanding of buoyancy. This is the third PowerPoint in this section (Fluid dynamics) v1.2 - Worksheet added with answers (2nd Sept 2021)

This is a 14 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of Hydrostatic Pressure. This covers hydrostatic thrust calculations, centre of mass and links to everyday engineering (dams), including a worked example. This is the second PowerPoint in this section (Fluid dynamics) v 1.1 - Worksheet added, with answers (2nd Sept 2021)

This is a 13 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topics of Specific Heat Capacity and Specific Latent Heat. This lesson covers the calculations for both heating and changing state of materials. The use of the gradients and scales of graphs are also covered as a method to finding the SHC and SLH of materials that are tested. This is the third PowerPoint in this section (Thermodynamics) and includes a slide which outlines the standard experiment to find the SHC of a substance using an immersion heater. v1.1 - Worksheet and answers add; minor grammar changed on graph explanation

This is an 15 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) plus a worksheet and the answers to the worksheet This covers the mathematical and physics of vectors, resolving vectors and creating free body diagrams, space diagrams and vector diagrams This PowerPoint forms Lesson 1 in this series v.2 - Jan 2022 PowerPoint improved with additional slides showing 4 step-by-step examples

This lesson covers the basic calculation of velocity, defines velocity and speed, covers the main units of measure and then uses graphs to show calculations using gradients. The PowerPoint is animated and is designed to show worked examples of how to find a gradient step-by-step for both a straight line and a curve. The worksheet is a two page questions sheet (with answer sheet supplied) that goes over the main points covered in the lesson

This is an 8 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of circular measurements including: converting degrees to radians, derivation of radians as a unit, calculating area or circles and sectors, calculating circumference and arc lengths. There is a worksheet and answers to the worksheet are included. This is the eighth PowerPoint in this section (Mathematical methods).

This is an 8 slide PowerPoint that coversthe topic of circular measurements including: converting degrees to radians, derivation of radians as a unit, calculating area or circles and sectors, calculating circumference and arc lengths. There is a worksheet and answers to the worksheet are included.

This is a detailed lesson and PowerPoint introducing students to circuit diagrams and circuit symbols. This is the first lesson in the Electricity unit of work (P2). There are ideas for homework, advise on differentiated teaching of the subject and PDF A3 circuit diagrams to print out and laminate to assist weaker students with this, often difficult activity. There is also a PDF card sort to print out of all of the circuit symbols required by the National Curriculum and examination board. v1.01 - Corrected first slide, oval sent to back of page

This is a detailed lesson plan and PowerPoint explaining how to calculate density, conversion of units for mass and volume and the effect of density on floating. This is the second lesson in the Particle Model unit of work (P3). The lesson plan is step by step including extension ideas and the learning objectives linked directly to the syllabus plus a detailed practical idea and demonstrations. See my shop for a huge number of lessons and bundles

This is a lesson and PowerPoint that covers Newtonian and Cassegrain optical telescopes including ray diagrams. Spherical aberrations and the advantages of mirrors over lenses are also covered. As well as supporting A-Level Physics for many exam boards this lesson is also part of a chapter that covers the optional astrophysics unit 9 for AQA Please see my shop to view all of my lessons and entire schemes of work

This is a lesson and PowerPoint revising and summarizing the Particle Model of Matter. This is the eighth lesson in the Particle Model unit of work (P3). The lesson quickly recaps lessons 1 - 7 from this unit (which are available on this site and as a bundle) and covers the theories of solids, liquids and gases; the particle diagrams, density, specific heat capacity, specific latent heat and a qualitative assessment of the gas law.

This is lesson 11.1 Density from the latest syllabus and linked to the latest Oxford book (2015) Included here is a PowerPoint of this lesson and lesson plan complete with point by point teaching, homework recommendations and curriculum link; everything that you need to teach this lesson. All of Chapter one is free to sample. I am bundling every chapter of the Year 1 and Year 2 course to make them cheaper. The entire 80 PowerPoint course and full scheme of work is also available as a much cheaper single download in my shop

This is lesson 11.3 Deformation of Solids from the latest syllabus Included here is a PowerPoint of this lesson and lesson plan complete with point by point teaching, homework recommendations and curriculum link; everything that you need to teach this lesson. All of Chapter one is free to sample. I am bundling every chapter of the Year 1 and Year 2 course to make them cheaper. The entire 80 PowerPoint course and full scheme of work is also available as a much cheaper single in my shop

This is lesson 22.4 Coulombs Law from the latest syllabus Included here is a PowerPoint of this lesson and lesson plan complete with point by point teaching, homework recommendations and curriculum link; everything that you need to teach this lesson. All of Chapter one is free to sample. I am bundling every chapter of the Year 1 and Year 2 course to make them cheaper, please see my shop