Five illustrated stories as PowerPoints. Created and spoken by a native French speaker. Contains full text, with option to translate and repeat the spoken sentences. Grammar notes are given for each sentence making this particularly suitable for teachers that do not have a comprehensive grasp of the language, as what is needed is right there on the screen for. Each story ends with a set of exercises. The stories are: La famille Martin et la famille Dupont 1 & 2. Où est le chat? Faire les courses. La journée de Nathalie.

This unique approach to playing blues guitar will take you bar by bar from the simplest of introductions to a fully-fledged blues solo. Each lesson is composed of 12 bars and usually introduces a new technique that can be used exactly as shown or modified and incorporated into the blues title being learnt. Explanation of the techniques and the music theory behind each phrase are given for each lesson. The various box positions are introduced as encountered in the lessons. Techniques include: bending, pull-offs, sliding, staccato, vibrato and many more in the later solos. Each bar is accompanied by a video showing exactly how the guitar is played and the animated tabulature. At the end of the solo you have the option of playing along with the entire track as the tab scrolls past (see below) or playing over the 12 bar blues backing. There is also introductory material on the guitar, tuning, distortion and damping, amplifiers, intonation, string gauge, the 12-bar blues, and understanding tablature. ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This unique approach to playing blues guitar will take you bar by bar from the simplest of introductions to a fully-fledged blues solo. Each lesson is composed of 12 bars and usually introduces a new technique that can be used exactly as shown or modified and incorporated into the blues title being learnt. Explanation of the techniques and the music theory behind each phrase are given for each lesson. The various box positions are introduced as encountered in the lessons. Techniques include: bending, pull-offs, sliding, staccato, vibrato and many more in the later solos. Each bar is accompanied by a video showing exactly how the guitar is played and the animated tabulature. At the end of the solo you have the option of playing along with the entire track as the tab scrolls past (see below) or playing over the 12 bar blues backing. There is also introductory material on the guitar, tuning, distortion and damping, amplifiers, intonation, string gauge, the 12-bar blues, and understanding tablature. ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This unique approach to playing blues guitar will take you bar by bar from the simplest of introductions to a fully-fledged blues solo. Each lesson is composed of 12 bars and usually introduces a new technique that can be used exactly as shown or modified and incorporated into the blues title being learnt. Explanation of the techniques and the music theory behind each phrase are given for each lesson. The various box positions are introduced as encountered in the lessons. Techniques include: bending, pull-offs, sliding, staccato, vibrato and many more in the later solos. Each bar is accompanied by a video showing exactly how the guitar is played and the animated tabulature. At the end of the solo you have the option of playing along with the entire track as the tab scrolls past (see below) or playing over the 12 bar blues backing. There is also introductory material on the guitar, tuning, distortion and damping, amplifiers, intonation, string gauge, the 12-bar blues, and understanding tablature. ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions. This unique approach to playing blues guitar will take you bar by bar from the simplest of introductions to a fully-fledged blues solo. Each lesson is composed of 12 bars and usually introduces a new technique that can be used exactly as shown or modified and incorporated into the blues title being learnt. Explanation of the techniques and the music theory behind each phrase are given for each lesson. The various box positions are introduced as encountered in the lessons. Techniques include: bending, pull-offs, sliding, staccato, vibrato and many more in the later solos. Each bar is accompanied by a video showing exactly how the guitar is played and the animated tabulature. At the end of the solo you have the option of playing along with the entire track as the tab scrolls past (see below) or playing over the 12 bar blues backing. There is also introductory material on the guitar, tuning, distortion and damping, amplifiers, intonation, string gauge, the 12-bar blues, and understanding tablature. ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

There are 6 titles: Bernard Cuisine Louvre Proverbs Trafic Each title consists of an audio track by a French native speaker, and Word document with the French and English translation plus grammar notes on each sentence. For example, the first two sentences from the title ‘Louvre’ title are: Dans les années vingt, la ville de Paris était divisée en différents petits villages. In the twenties, the city of Paris was divided into small different villages. • Auxiliary être in the imperfect tense followed by the past participle of diviser, used here as an adjective. • Divisée (feminine singular) agrees with la ville de Paris.Differents, adjective, agrees with the noun villages. • The adjective petits agrees with the noun villages. Montmartre, par exemple, était déjà renommé pour ses vignes, ses jardins et ses moulins. • Montmartre, for instance, was already famous for its vineyards, its gardens and its windmills. • Imperfect tense of the auxiliary être followed by the adjective renommé. • Ses, possessive adjective, plural form of son, sa. These are for you to use anyway that you want as long as you do not copy to another institution or anyone outside of your school/college. Licence This product is for mulit-user at a single site and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This uses a games approach to familiarise the students with Crime Scene Investigation as taught in BTEC Science Level 2 Extended Certificate Unit 13. In the Crime Scene Training Room is a body lying in a pool of blood. The students must gather the evidence without contaminating the crime scene and take it to the Crime Laboratory. At each stage they are given instructions aurally and written (on in-game plasma TVs) on what they need to know. They start outside the Store Room where they are required to stock up with the tools of the trade. Once stocked up, it’s off to the Locker Room where they are required to don a protection suit. Then to the Scene of Crime Training Room. Access to the Scene of Crime Training Room will be denied unless the student is wearing the full protective uniform with gloves and boots. Now they are ready for the Crime Scene Training Room which contains the mock-up of a crime. This is where the students will use the items that they have picked up from the Store Room. For example, they need to obtain a swab of the blood, but it has to be done correctly. They need to place a marker by the blood, take a photograph, use the swab and then label it. The application will give advice when any attempt to collect the evidence incorrectly is made. Then it’s on to the Crime Lab where they can use the various instruments and computers for processing the gathered evidence. There’s a microscope for examining fibres, The DNA is analysed by the equipment shown here and outputs a DNA ‘fingerprint’. There is also a gas chromatograph and a finger print station. This is a 3d immersive game-like experience that will fully engage the students. The students must gather the evidence without contaminating the crime scene and take it to the Crime Laboratory. At each stage they are given instructions aurally and written (on in-game plasma TVs) on what they need to know. This game-like approach will gain the students attention as they compete to gather and process the evidence while learning much of the vocabulary and methods of the world of forensics. These methods are enforced, if the student cannot label a sample so that it can be processed because he/she has ran out of labels, then he has to go back to the store room to get a label before he/she can continue. This is a fantastic way to get the students motivated to learn. They’ll think they are just playing a game. The application is not reliant on state of the art graphics and will run with standard pc graphics cards. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

The original Thoroughly Obedient Moron is a safe and user friendly environment for learning the fundamental concepts of how a computer works. From logic gates to algorithms. TOM’s original screen allows interactive programming that includes branching, looping, subroutine calls with stack operations, input and output operations, interrupt processing and memory mapped output. Complex concepts, such as recursion, are easily understood when you can see all the memory right in front of you and follow the flow of control. The unwinding of the call stack is so visual that understanding is an immediate eureka moment; making this the ideal groundwork before moving onto high-level language programming. Any TOM program can be seen executing on the main screen or by TOM’s underlying machine. A collection of interactive screens show how the elements of TOM are built from logic gates. Programming TOM enables students to have a deeper understanding of how computers work which helps them in all their future work with computers. TOM’s comprehensive documentation and help give background information on: • Number systems. • ASCII collating sequence • Binary encoded decimal. • Logic gates. • Stacks and subroutines. • Numeric overflow. And has numerous exercises you can use in class. *"This is real education, deep stuff. It’s informative, accurate, interesting and recommended. I don’t want to give it back.” * Parents & Computing We have found it an excellent tool for the delivery of the machine architecture aspects of A level Computing. It facilitates well demonstrations by the teacher but most importantly enables hands-on work by the students“ Paul Morgan, Sir John Deane‘s College. Licence This product is for a single site and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Whilst efforts will be made to maintain third party links to sites such as simmer.io (for simulations) and Youtube (for videos), these cannnot be guaranteed in perpetuity. Purchasing and downloading this product is your consent to these conditions.

This unique approach to playing blues guitar will take you bar by bar from the simplest of introductions to a fully-fledged blues solo. Each lesson is composed of 12 bars and usually introduces a new technique that can be used exactly as shown or modified and incorporated into the blues title being learnt. Explanation of the techniques and the music theory behind each phrase are given for each lesson. The various box positions are introduced as encountered in the lessons. Techniques include: bending, pull-offs, sliding, staccato, vibrato and many more in the later solos. Each bar is accompanied by a video showing exactly how the guitar is played and the animated tabulature. At the end of the solo you have the option of playing along with the entire track as the tab scrolls past (see below) or playing over the 12 bar blues backing. There is also introductory material on the guitar, tuning, distortion and damping, amplifiers, intonation, string gauge, the 12-bar blues, and understanding tablature. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a teacher or student controlled 3d experiment that allows you to plot the IV characteristics of a lightbulb. That is, you can plot how the current changes when you change the voltage (The ‘I’ is for current, and the V is for voltage). This depends on the resistance of the bulb which changes depending on the voltage. Effectively the bulb gets hotter and hotter as the voltage increases until it is eventually white hot. As the temperature of the metal filament gets hotter its resistance changes. The user can control the power supply and the variable resistor. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try a practical from our website. The package is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads include: a PowerPoint giving full instructions including a video, background on the Physics and the practical application in a zip file. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for. Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop. Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student controlled 3d experiment to confirm the inverse square law for radiation. All forms of radiation follow the inverse square law. That is the intensity of radiation declines as to the square of the distance from the source. In this experiment we measure the background radiation and the count rates of gamma particles hitting a detector at a range of distances. Plotting the results will verify the inverse square law. The user can move a lead block in front of the gamma source to measure the background radiation count, and then move the detector to a range of distances from the detector and take readings of the count for a fixed period of time. The user can position him/herself anywhere within the laboratory in order to take readings from the instrumentation. Try a practical from our Instructions on performing the experiment are included. The package is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Download contains a PowerPoint giving full instructions including a video, background on the Physics and instructions on running the experiment, as well as a link to an on-line version (no need to install unless you want to). The Virtual Physics Laboratory of which this practical is a part, has the Association for Science Education’s Green Tick of approval. Andrew McPhee Wellington School: I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop. Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom. Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled experiment that shows that the structure of an atom is consistent with having a small, postitively charged nucleus. The user controls the rotation of the particle detector whilst monitoring the number of particles it is detecting. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads include: a PowerPoint giving full instructions including a video, background on the Physics and the simulation application in a zip file. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for. Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop. ​Physics Scholar Coordinator. ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled 3d simulation of an experiment to measure the resistivity of constantan. Every material that obeys Ohms law (not all materials do) has a characteristic resistivity. The resistivity is a constant for a particular substance that allows you to calculate what the resistance is in Ohms for a wire of a particular length with a particular cross-sectional area. This experiment allows you to plot the resistance against the length of wire that the current is flowing through. Given that you can find the cross-sectional area by measuring the diameter with a micrometer you can then calculate the resistivity. The user has control over the position of the crocodile clip on the constantan wire, the voltage from the power supply unit, and the micrometer screw gauge barrel. The user can position him/herself anywhere within the laboratory. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. As revision for an experiment that has previously been performed in the laboratory. For home-learning where there is no access to a laboratory. To make up for an experiment missed due to sickness. As a personal experience of an experiment normally only performed by the teacher in front of the class. . Download contains full instructions on using the package, a PowerPoint giving full instructions including a video , background on the Physics and instructions on running the experiment, as well as a link to an on-line version (no need to install unless you want to). The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School *I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." * Physics Scholar Coordinator.

Give your students unfettered access to a multitude of Physics practicals with no laboratory required. No breakages, no setup time, always ready to go. This is a student or teacher controlled 3d practical of a monochromatic laser and a diffraction grating to produce a diffraction pattern which enables the wavelength of the laser light to be determined. Then the number of lines of a different grating can be deduced with some careful measurements. The user has control over the screen angle, which grating to use, the position of the grating and switching the laser on and off. The user can position him/herself anywhere within the laboratory. You can try one of the practicals from our website. Instructions are included. The package is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. As revision for an experiment that has previously been performed in the laboratory. For home-learning where there is no access to a laboratory. To make up for an experiment missed due to sickness. As a personal experience of an experiment normally only performed by the teacher in front of the class. Download contains full instructions on using the package, a PowerPoint giving full instructions including a video , background on the Physics and instructions on running the experiment, as well as a link to an on-line version (no need to install unless you want to). The Virtual Physics Laboratory of which this is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled 3d experiment that allows you to find the charge on an electron by examining the motion of charged polymer balls in an electric field. The user controls the electric field: polarity and strength, the introduction of the polymer balls to the examination chamber, and can measure the separation of the electrostatic plates using a micrometer screw gauge. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The package is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for. Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop. Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled, realistic 3d simulation of an experiment that allows the measurement of Planck’s constant using coloured LEDs. The user controls the voltage reaching the LED and can choose from a selection of different coloured LEDs. Two multimeters monitor the current and the voltage. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads include: a PowerPoint giving full instructyons including a video, background on the Physics and the simulation application in a zip file. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student controlled realistic 3d investigation of flux linkage using a signal generator, search coil and oscilloscope. This experiment establishes the relationship between the induced voltage in a coil when at various angles to another coil. It uses audio signals from a signal generator to vary the input voltage. By measuring the voltage induced in the search coilusing an oscilloscope, and varying the angle of the search coil, the relationship between the induced voltage and the angle of the search coil can be established The user has control over the angle of the search coil, the amplitude and frequency of the signal from the signal generator, the various controls of the oscilloscope which include the amplitude sensitivity, the time frame, and the various cursor controls. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the practicals from our website. Instructions are included. The package is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. As revision for an experiment that has previously been performed in the laboratory. For home-learning where there is no access to a laboratory. To make up for an experiment missed due to sickness. As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a teacher or student controlled 3d experiment that confirms Boyle’s Law: pressure times volume is a constant for a gas at constant temperature. The apparatus consists of a syringe with its plunger that allows for the pressure to be changed under control of the user and for the volume to be measured. The user has control over the weight on the syringe plunger which changes the pressure. The user also controls a micrometer screw gauge that is used to measure the diameter of the syringe’s plunger. The user can position themself anywhere within the laboratory in order to take readings from the instrumentation. You can try one of the practocals from our website. Instructions are included. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Download contains a PowerPoint giving full instructions including a video, background on the Physics and instructions on running the experiment, as well as a link to an on-line version (no need to install unless you want to). The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

Give your students unfettered access to a multitude of Physics practicals with no laboratory required. No breakages, no setup time, always ready to go. This is a student or teacher controlled 3d experiment that enables the investigation of acceleration due to gravity using an Airtrack. The airtrack is made to slope downwards and a glider is timed as it travels along the track, The user can control of the slope of the track, the air pump that reduces friction on the track, and the position and type of photo timers used. he user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the practcals from our website. Instructions are included. The package is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Download contains full instructions on using the package, a PowerPoint giving full instructions including a video , background on the Physics and instructions on running the experiment, as well as a link to an on-line version (no need to install unless you want to). The Virtual Physics Laboratory of which this is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

Give your students unfettered access to a multitude of Physics practicals with no laboratory required. No breakages, no setup time, always ready to go. This is a student or teacher controlled 3d experiment that confirms Charles’s Law that states that at constant pressure the volume of a fixed amount of a gas is proportional to the temperature. The user controls the flow of water into the beaker that cools the water whilst monitoring the position of the oil drop and the temperature. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of our experiments from our website. Instructions are included. The practival is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Download contains a PowerPoint giving full instructions including a video, background on the Physics and instructions on running the experiment, as well as a link to an on-line version (no need to install unless you want to). The Virtual Physics Laboratory of which this is a part, has the Association for Science Education’s Green Tick of Approval. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for. Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop. Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

Give your students unfettered access to a multitude of Physics practicals with no laboratory required. No breakages, no setup time, always ready to go. This is a teacher or student controlled 3d experiment to determine the field strength of a magnetic field by observing the force it exerts on a current carrying wire. Electronic kitchen scales are used to indicate the force on the wire whilst a power supply can be controlled to vary the current in the wire. The user has control over the power supply’s voltage and the operation of the digital scales. The user can position themself anywhere within the laboratory in order to take readings from the instrumentation. You can try one of the practicals from our website. The package is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads are{ a PowerPoint giving full instructyons including a video , background on the Physics and the simulation application in a zip file. TThe Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School *I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." * Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.