EDUQAS Constructing the Build Environment - Unit 1 Unit 1 TASK BOOKLET Powerpoint for all main specifications points Homeworks and Assessments

This is an extension task for the joinery task. All the skills have been photographed and can be printed and laminated to give learners that differentiation to promote independence and help learners who are struggling with any of the steps.

Unit 3 written exam that covers job roles. The exam is designed as a mock as my current classes have only covered unit 3 - LO 1.1 to 2.1

4 KS3 remote learning projects for learners to complete at home. Robotic hand Egg catch challenge Marble run Bird feeder - Recycled materials

Eduqas/Wjec Engineering - Unit 3 Revision tasks - 3rd Angle/Orthographic and area/volume questions 1 x 3rd Angle/Orthographic and area/volume questions answers 1 x 3rd Angle and Orthographic drawing booklet 2 x Guided reading tasks

Teaching from September 2022 SOL for year 10 Eduqas/Wjec Engineering Lvl 1/2 This is how I’m running it from September but no way is it set in stone. This is my first draft but the foundations are there. We have 1 double lesson and 1 single lesson each week for year 10’s and 11’s. The double lesson I intend to run with the practical elements for unit 1 this is based on skills that will/should be used when the exam board release the skills needed in June/July. I am running with exam theory in the single lesson. All resources will be linked to the specification and titled in that way. See my downloads for these resources.

I have adapted the previous skills to match the skills to be covered in the new specification. Working with the SOL I have produced a Powerpoint that shows all the skills as well as Engineering drawings with sizes of a mini stud wall.

EDUQAS - Unit 2 - Constructing the Build Environment Unit 2 booklets for JOINERY, TILING AND ELECTRICAL The booklets will be used as a place where students document the skills they have covered/tools needed/risk assessment and evaluation. Individual Powerpoints for each skill. Powerpoint explain indepth knowledge needed to deliver each skill which includes links to tutorials.

I have added a road map for year 10 and 11 road map for Design and Technology. It shows specific points where and when each aspect of the course should be completed.

I have added a road map for year 10 and 11 road map for Construction. It shows specific points for each unit where and when each aspect of the course should be completed.

Unit 3 is now fully planned that covers all LO and AC. Each Ac has task or task assigned to them that work along side power points that have completed answers within the power point. I have spent some seriou time developing these resources hence the final price. Learner work booklet Power points for each LO and AC Completed GAANT chart Blank GANNT chart (for learners to complete) Tracking sheet for all of the units Client revision pages within each power point COSHH pdf that learners need to complete a risk assessment. Client revision sheets R/A/G progress sheet Weekly breakdown on extensions

Eduqas - Constructing the build environment - Unit 3 Teaching. LO2 - AC2.1 - Phase 1 to 3 Adapted resources for teaching of the three phases. Differentiated task where learners work in small groups discussing the roles of each job title and how the link with the build.

Eduqas/Wjec SOL - Year 10 SOL for units 1 - Engineering design & Unit 3 Solving Engineering problems. Indepth break down of week by week and how each AC and LO will be covered. Edexcel speaad sheet

Design and Technology SOL years 7, 8 and 9 All 3 SOL are completed on an excl sheet. Each year group is linked with my KS3 resources that are already uploaded onto the site and can be accessed through my shop.

Engineering - Eduqas/Wjec Lvl 1/2 - Unit 3 - Solving Engineering problems Teaching from September 2022 This unit will be ran in the single lesson allocated to this subject in year 10 and 11. I plan to run the exam at the end of Year 11 for my classes. This is linked with how I intend to run this course when using the SOL I have added to the site. See SOL for further details. All tasks are linked to the specification. This is work in progress and some tasks may be incomplete but like I said this is work in progress for a new specification and will provide the basis of a good foundation to work from. SEE PART 2 OF THESE RESOURCES TO COMPLETE THIS UNIT I have also added Unit 2 - Designing engineering products resources Weeks 1 to 4 - 3.3.1 Describing engineering processes Weeks 5 to 8 - 3.3.2 Describing applications of engineering processes Weeks 9 to 12 - 3.3.3 Safe working practices Weeks 13 to 16 - 3.1.1 Describing engineering developments Weeks - 17 to 20 - 3.1.2 Explaining the effects of engineering achievements Weeks 21 to 24 - 3.1.3 Explaining how environmental issues affect engineering applications Weeks 25 to 28 - 3.2.1 Understanding materials, their properties, and their selection for specific purposes Please check back for updates to this uplaod as i will develop more resources and adapt and improve the ones already done. Such as 3.2.1 Understanding materials, their properties (updated)

I have developed a booklet for learners to develop skills when calculating materials. The questions are job related and designed the same way as they will come up in the exam. I have started the booklet with simple easy questions and then worked into exam style questions.

Resources to help deliver and guidance for teachers which includes templates. The resources also include power points that will help learners learn how to draw and convert third angle projection. I have added numerous tasks for learners to follow. I have added slides that show and demonstrate the tasks and how shapes are draw in both orthographic and 3rd angle drawings. I will add google sketch up drawings to show how to make a product in google sketch and then move the design to be able to screen shot it to show third angle drawing. Following tasks and power point for learners to complete: Orthographic and 3rd angle projection task Life cycle assessment task Renewable energy I will be adding other resources for this unit so keep checking back

Resources to help deliver and guidance for teachers which includes templates and examples of work that has been graded. A teaching PP and Learner PP is supplied for units 1 I have added the template for the 2D Design. Each part of the low-cost phone rig has been drawn on a seperate 2D Design file. These can be adapted for learners. Message for and I can email them.

Introduction to isometric drawing lesson. Lesson is fully planned with teaching powerpoint and a student on isometric paper. I used this for an interview lesson and feedback was that was a excellent way of teaching properties of materials and a unique twist that students can relate too.

Year 8 mood light projects - Weeks 1 to 11 - Each week has a question that will be discussed in the practical lesson. Each question relates to a big question that is - What impact does the manufacturing have on your carbon footprint? - Each week a homework has been added. A tracking sheet that will be used to assess the learners at the end of the carousel. PLC has been added to the resources where each learner will use them to check their own progress and skills learnt. Each skill that is taught has been photographed and is in the powerpoint. Engineering drawings are added to the slides to teach learners the basics of reading engineering drawings. A workbooklet has been added that I used during lockdown.