This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C1.1 ’Particles & their Behaviour’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson begins with a video on the process of ‘boiling’, students will need to answer a set of questions whilst watching the video. Once complete students can self-assess their work using the mark scheme provided. Students are then shown a method they could use to measure the boiling point of a liquid, they are given tips for what to look out for - e.g. bubbles of gas forming in the liquid and also an increase in temperature which then plateaus at a certain point without increasing further. Next activity is a ‘progress check’, students are asked to copy and complete a set of sentences to outline the process of boiling. This task can then be marked using the mark scheme provided on the PowerPoint. The next part of the lesson focuses on an investigation, students are asked to firstly think about why salt might be added to a pan of boiling water when cooking pasta. After a short class discussion, students will need to come up with a prediction of how adding salt to water will affect the boiling point of water - will it make it higher or lower? After making the prediction, students will now conduct the experiment to investigate the effect of salt on the boiling point of water. Results should be written into a results table, followed by plotting a graph of their results and writing a conclusion. The last section of the lesson focuses on the usefulness of boiling points and melting points of substances for predicting the state they are in. Students are provided with the melting point and boiling point of magnesium and are asked to predict the state of the metal at certain temperatures. This work can be marked and corrected using the mark scheme provided. Lastly, students are given a set of questions based upon what they have learned so far this lesson, they should indicate the correct answers with either thumbs up, thumbs down or thumb in the middle. The plenary task requires students to write a list of key words from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Rates of Reaction’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Organic Chemistry’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This homework activity is designed for the KS3 Science Course, specifically Year 7 C1.4 Module on ‘Acids & Alkalis’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This activity contains a set of differentiated questions, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension/revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know @swift_science_education or swift.education.uk@gmail.com, any feedback would be appreciated :)

This task is designed for the NEW AQA GSCE Chemistry. Included in this resource is a ‘revision placemat’ for Atomic Structure and the Periodic Table, including defining an element, drawing electronic structures, organising the periodic table and the structure of the atom. Pupils will also revise the mass and atomic number as well as properties of alkali metals, noble gasses, and word/balanced equations including a word equation for displacement in halogens. There are 12 revision questions in total. Pupils may use their books if necessary but should test their knowledge by attempting to answer all questions from memory first. The solution for this activity is also included so you can check their answers, or they may self-assess. Thanks for looking, if you have any questions, please let me know in the comments section and any feedback would be appreciated :) For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will firstly come up with a mind map of ideas about why water is such an important resource, they can discuss with their partner and write their ideas in their books. Some of the reasons can then be revealed via the PowerPoint presentation and pupils can assess their work - making corrections where necessary. Pupils are then shown a quick recap of the stages involved in the water cycle, before beginning to look at the treatment of fresh water and purification of salt water. Students will be given a worksheet of questions, around the room will be information sheet on how fresh water is turned into potable, drinking water and how sea water is purified. Pupils will need to read the information posters to answer their questions, this work can then be self-assessed using the mark scheme provided. The next part of the lesson will focus on waste water treatment, pupils will watch a video on the steps involved with sewage treatment. Pupils will answer a set of questions whilst watching the video, this work can then be self-assessed using the answers provided. The final task is for pupils to complete an exam-style question on this topic, they can answer in their books and either self or peer assess using the mark scheme provided. Finally, pupils will be given a set of answers, they will need to come up with questions which match these answers. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Chemistry GCSE, particularly the ‘Atomic Structure & Periodic Table’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with an introduction to the group that alkali metals are found in, this then is followed by a video about the metals where pupils will be required to answer questions, these can then be self-assessed. Next, the PowerPoint slides explain why, in terms of electronic configuration, the alkali metals increase in reactivity as you go down the group. Pupils can summarise this information using a fill-in-the-blank task, which can then be self-assessed. The reaction with alkali metals can then be modelled (practically you can show a demo of this) and pupils will need to be able to complete the word equation for this reaction, using a worked example of lithium and water pupils will need to fill int he word equations for other alkali metals. This work can be self-assessed. Pupils will then be given a set of information about the properties of alkali metals and about their reaction with oxygen and chlorine. Using this information pupils will need to complete questions, as well as compete work equations showing the reaction of various alkali metals with either oxygen or chlorine. Again, all answers to this work is provided so pupils can self or peer assess their work… The plenary task is a true or false task, which pupils could complete on their own at the back of their books. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a video on covalent bonding, pupils will need to watch the video and answer a set of questions. When pupils are finished their work can be marked using the answers provided. The next activity is a crossword on covalent bonding, this too can be self-assessed using the answers provided on the PowerPoint. The next part of the lesson focuses on simple covalent molecules, firstly pupils are introduced to the idea that covalent structures are either simple molecules or giant structures. Pupils will be shown dot and cross diagram of a hydrogen molecule and asked to have a go at drawing a dot and cross diagram of a chlorine molecule. Once this work has been checked, pupils are then shown how to draw a dot and cross diagram of a double bond and triple bond (oxygen molecule and nitrogen molecule), it may be beneficial for pupils to draw these diagrams in their books for future reference. The lesson now focuses on some of the properties of simple covalent molecules, then pupils will be asked to draw a dot and cross diagram to show the structure of water, methane and ammonia. Once this task is complete, students can assess their work using the answers provided on the PowerPoint presentation. The final task is a true or false task, pupils are given a set of statements about covalent bonding. They will need to identify if true or false, this can be done as a whole class using white-boards or in their books. The plenary task is for pupils to unscramble anagrams of words relating to the bonding topic. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Chemistry GCSE, particularly the 'Atomic Structure & Periodic Table' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience First task is a true or false task about the structure of an atom just to remind pupils about what they already know about these sub-atomic particles. Then pupils are played a video about the rules regarding electronic configuration, with which they should fill in a worksheet, either completing sentences or answering questions. Once this is finished pupils will self-assess their work. Next, the rules of how many electrons each shell can hold is demonstrate using diagrams, pupils are given examples to further consolidate this information. Next, pupils are given a table with different elements listed, they will need to identify the mass number, atomic number, draw and write out the electronic configuration for each element. This can be assessed once it has been completed. The next task is an extension of what has just been completed, pupils are given a worksheet where they need to fill in the electron shells for the first 20 elements as well as write out the electronic configuration. Again, pupils will be provided with the answers to mark this work. The final two activities focuses on the importance of how many electrons are in the outer shell of an atom of an element and what this means for the reactivity of this element. Pupils will watch a further video and also complete fill-in-the-blank sentences to summarise what they have learnt. The plenary task is a set of graded questions about atomic structure. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to composite materials, students will be told the definition of a composite material and will be given two examples - MDF & reinforced concrete - including details on the physical properties of these materials. Students will now carry out an investigation into the properties of reinforced concrete vs. concrete. Students should follow the instructions on the sheet to complete the investigation, once complete students can test the concrete by performing some tests on the blocks. Students will now be introduced to other composite materials, firstly carbon-fibre, students will listen to an audio piece of a cyclist explaining the usefulness of carbon-fibre for bikes and bike accessories. This task can be self-assessed using the mark scheme provided, once complete. Next, students will complete an ‘Each one, teach one’ task. For this, students will be in pairs and will need to learn a piece of information about a composite materials - either nylon or glass-fibre-reinforced aluminium. Once learned, students will then teach their partners about the substances used to make the material, the properties of the materials and some examples of uses. Students will use the information to complete a summary table, this work can then be marked and corrected using the mark scheme provided. The plenary task requires students to come up with a question for five answers which are provided, this will assess students knowledge of what they have learned through this module. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a ‘Think > Pair > Share’ task, students are asked to describe what happens when salt is mixed with water, using the particle model to help them with their explanation. After a short discussion, a diagram is revealed to show students what happens when more and more salt is added to water, eventually reaching a saturated solution. Students will now be provided with a definition for ‘solubility’, following this students will complete a task whereby they will match the key word to the correct definition. Students can self-assess their work once this is complete. Next, students will complete an investigation to work out how much sugar can be dissolved in 100g of water - an equipment list and method is provided for students to follow. Students will now be given some data on the solubility of two salt compounds - potassium chloride and sodium chloride - as temperature increases from 0-100 degrees celsius. They will be required to draw a graph to display this data and describe the relationship between temperature and solubility. This work can be self-assessed once it is complete, using the mark scheme provided. Lastly, students will complete a ‘copy and correct’ task where they will need to copy a paragraph into their books and make amendments so that it correctly summarises what students have learned this lesson. The plenary task is a 3-3-1 reduction, students will need to write down three facts, three key words and 1 question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to the process of filtration, students are shown a diagram and are provided with an description of a method for filtering a mixture. After this, students are provided with a jumble of statements, they will need to order these statements to correctly describe the method of filtration, this task can then be self-assessed using the answers provided. Students will now watch a video on evaporation, students will need to answer a set of questions whilst watching this video. Once students have completed this task, they can mark their work using the answers provided on the PowerPoint presentation. Following this, students will complete a practical to make copper sulphate crystals. The next part of the lesson is on distillation, students will be shown the apparatus used to carry out distillation and will need to copy and complete a paragraph of information to summarise this process. This task can then be marked using the mark scheme provided. Following this, students will be provided with another set of jumbled statements which they will need to order to correctly describe the method of distillation. The answers to this task are included so students can self-assess their work using the mark scheme provided. The plenary task requires students to summarise what they have learned this lesson in three sentences. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Students will firstly be given a recap on the definition of a polymer and an explanation of the factors which can affect the properties of a polymer. Pupils are then given some information about high-density polyethene and low-density polyethene, they will need to use this information to complete a worksheet of questions. This work can then be self-assessed using the mark scheme provided. Pupils will now complete an investigation into the modification of polymers by finding how the quantity of borax solution can affect the properties of slime, they can record their observations in a table in their books. Next, students are introduced to the processes of thermosetting and thermosoftening polymers with a video - using the information in the video they will need to answer a set of questions. This work can be self-assessed using the mark scheme provided. The last task is a ‘Quick Check’ task - pupils will need to answer a set of questions about what they have learned this lesson. Their work can then be self-assessed using the mark scheme provided in the PowerPoint. The plenary is a ‘Pick a plenary’ activity which requires pupils to either unscramble a set of anagrams or write a summary sentence for the lesson using a list of key words. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Resources’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a ‘Think > Pair > Share’ task, pupils will need to consider the definitions of the terms ‘Finite’ and ‘Renewable’. After a discussion in pairs and as a class, the definitions for these words can be revealed which pupils can write in their books. Next, pupils will watch a video on the availability and sustainable use of Earth’s resources, pupils will need to answer a set of questions whilst watching these videos and can self-assess their work once finished. Pupils are now introduced to a variety of natural resources which are getting used up by the chemical industry, students are given a list of these raw materials and are then asked to consider what factors might determine how quickly they may run out and the uncertainties surrounding estimates of how long they will last. After a discussion pupils can mind map their ideas, before the answers revealed and students can self-assess their work. Next, pupils are shown how to calculate orders of magnitude - the skill is demonstrated and then pupils need to have a go at tackling a problem. The next part of the lesson focuses on renewable resources, some examples of renewable energy sources are introduced and then students need to complete a task whereby they read information about different renewable fuel sources and have to sum up the advantages and disadvantages for each. Students can complete a table of their ideas in their books, this task can be self-assessed using the mark scheme. Finally, pupils complete an exam-style question on this topic and self-assess their work. The plenary task requires pupils to summarise what they have learned in the lesson using one of the sentence starters. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please email me at swift.education.uk@gmail.com and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.4 unit on ‘The Earth’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the three categories of rocks - sedimentary, igneous and metamorphic rock. This then follows into an introduction into weathering, students will learn about the the three types of weathering - physical, chemical and biological, students need to be able to name examples for each type of weathering. This can then be assessed in the next task, students are given a group of key words and will need to use these words to write their own description of physical, chemical and biological weathering. This work can then be self-assessed using the mark scheme provided in the PowePoint. The next part of the lesson now focuses on sedimentary rocks, students are firstly introduced to some of the common properties of sedimentary rocks. Students will then watch a video on the formation of sedimentary rocks, whilst watching this video students will answer a set of questions. This work can then be self-assessed using the mark scheme once complete. Lastly, students are provided with a set of statements, on the board or printed out as a card sort, they will need to arrange these cards in order so that they correctly describe the stages involved in the formation of sedimentary rocks. This work can be self-assessed or peer-assessed using the mark scheme provided. The plenary task requires students to write a set of quiz questions to test their peers on what they have learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.1 unit on ‘The Periodic Table’ For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson starts off with an introduction to the Periodic Table and Dmitri Mendeleev, this then follows into a video which students will watch and will also answer questions on a worksheet. Once this task has been completed, students can self-assess their answers using the mark scheme provided. Next, students are introduced to the idea of groups and periods of the Periodic Table. Students can take notes on the definition of these two terms, before leading into a task whereby students will be given some data on the melting points and boiling points of Group 1 metals. Using this data students will be asked to answer a set of questions, this work can then be marked and assessed using the mark scheme provided. The next task focuses on periods of the Periodic Table, students will need to use the data provided in the PowerPoint presentation to answer a set of questions on the pattern of melting points across Period 2 and Period 3. This task can then be self-assessed using the mark scheme provided. The last task is a copy and correct task, students will need to copy the paragraph out into their books, correcting any mistakes. This work can the be marked and assessed using the mark scheme provided in the PowerPoint. The plenary task requires students to write down three quiz questions to test their peers knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a homeschool pack designed for the KS3 Year 8 Science course, specifically the ‘C2.3 Reactions with Metals’ unit of work. For more lessons & homeschool packs designed for KS3 and KS4, please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This comprehensive pack contains four pages of information, to meet learning objectives within the Year 8 'Reactions with Metals’ unit of work. This is followed by three pages of questions, differentiated to suit a range of abilities, as well as a detailed mark scheme for students/parents to mark and correct answers. The pack covers the following topics: Acids & Metals Metals & Oxygen Metals & Water Metal Displacement Reactions Extracting Metals Ceramics Polymers Composites Thanks for looking :), if you have any questions please email me at swift.education.uk@gmail.com.