This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Ecology’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity contains a set of differentiated questions worth 20 marks in total, it also includes additional extra challenge tasks for higher ability students to complete. This worksheet could be used as a homework or as an extension or revision activity in class. I have included a comprehensive mark scheme for teacher or self-assessment of the work, there are also details of grade boundaries which I use to RAG pupils work against their target grades, a full explanation of how I do this is included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Infection & Response’ SoW. For more resources designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Infection & Response’ SoW, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology. Included in this resource is a ‘revision placemat’ for Infection and Response. Concepts covered include: risk factors, pathogen spread, and a bacteria vs. a virus. Pupils will discuss bacterial, viral and fungal infections, their symptoms spread and treatment. They will also discuss antibiotic resistance, and mineral ions in plants. There are 12 revision questions in total. Pupils may use their books if necessary but should test their knowledge by attempting to answer all questions from memory first. The solution for this activity is also included so you can check their answers, or they may self-assess. Thanks for looking, if you have any questions, please let me know in the comments section and any feedback would be appreciated :) For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience

This task is designed for the NEW AQA A-Level Biology. Included in this resource is a ‘revision placemat’ for Inheritance, Variation and Evolution. Concepts covered include: inherited and environmental characteristics, reproduction, meiosis, and the structure of DNA. Pupils will also discuss selective breeding, genetic engineering, mutation and genetic tables. The final topics covered are fossilisation, natural selection and extinction. There are 15 revision questions in total. Pupils may use their books if necessary but should test their knowledge by attempting to answer all questions from memory first. The solution for this activity is also included so you can check their answers, or they may self-assess. Thanks for looking, if you have any questions, please let me know in the comments section and any feedback would be appreciated :) For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This task is designed for the NEW AQA A-Level Biology, particularly the ‘Cells’ unit. For more resources designed to meet specification points for the NEW AQA A-Level specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This activity is a revision activity for the ‘Cells’ unit, students can either have a card each and the task can be completed as a card loop activity with the whole class. Alternatively, students could work in pairs and be given a set of the shuffled cards, they will then need to arrange the cards into the correct sequence so that the sentences make sense (like dominoes tiles). When students carry out this version of the activity, I often have a prize for the students who complete the task in the fastest time! The solution for this activity is included so you can check their answers. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Chemistry GCSE, particularly the 'Atomic Structure & Periodic Table' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with student discussing the differences between atoms, compounds & mixtures and writing their ideas down, this is knowledge they should be able to recall from KS3. This is then explored further using an animation with questions that pupils are required to answer. After self-assessment of this task pupils are introduced to the definitions of each: atoms, elements, compounds and mixtures and will need to complete a fill-in-the-blank task to summarise. Pupils will then be given a selection of diagrams on the board, they will need to determine whether these diagrams are representing elements, compounds or mixtures. Once complete they can self-asses their work using the answers provided. The next part of the lesson introduces students to the idea of the periodic table, pupils will need to stick in a copy of it and then will be given a task sheet which can be completed using the names and symbols of the elements. The plenary task is a set of questions about what students have learnt that lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson designed to meet specification points for the new OCR GCSE (Gateway) Biology 'Cell-level lsystems’ scheme of work. The lesson begins with a recap from the last lesson, children are shown images of pieces of equipment which could be used to measure the rate of photosynthesis. Students can discuss, and write down in their books, a simple method using the equipment pictured. They can then self-assess their answers using the answer provided on the PowerPoint. Children will now be given a worksheet which describes an experiment carried out to test the effect of carbon dioxide concentrations on the rate of photosynthesis. Students will need to plot a graph to represent the results, and then answer questions about this data. Lastly, students will be introduced to the idea of the inverse square law - when you double the distance from a light source, the light intensity falls by a factor of four. Students will then need to use this to answer some questions in their books. All resources are included in the PowerPoint presentation, thank you for purchasing :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Structure & Bonding’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a recap on the differences between solids, liquids and gases in terms of the arrangement and movement of particles in each of these states of matter. Pupils complete a card sort activity to assess their knowledge on this topic and they can then self-assess their work using the answers provided. The next part of the lesson focuses on the transitions between states of matter, pupils are firstly reminding of the definitions of melting point, boiling point and freezing point. They will then watch a video on the the transition between states of matter, they will need to answer a set of questions whilst watching the video. This work can be assessed using the answers provided in the PowerPoint presentation. Using the knowledge from this task pupils can then consider why different substances have different melting/boiling points and why adding impurities to a substance may affect the melting/boiling point of a substance. The next part of the lesson focuses on energy transfers transfers between states of matter, pupils will firstly label a graph with statements to demonstrate what is happening to a substance as it is heated up over time. Pupils then consider, in depth, what is happening to the particles over this period of time, they can think > pair > share their ideas before the answers are revealed within the PowerPoint presentation using diagrams to illustrate the point. Pupils will then complete a set of questions on energy transfers between states of matter to assess their knowledge on the subject. This work can then be either self or peer assessed using the answers provided. The last part of the lesson is a task where pupils need to consider the limitations of the particle model of matter, again pupils can discuss in their groups what ideas they have on limitations of the model before some examples are revealed at the end of the presentation. The plenary task is for pupils to write a twitter message about what they have learnt today, including as many keywords as possible. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Chemistry GCSE, particularly the ‘Atomic Structure & Periodic Table’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with an introduction to the group that alkali metals are found in, this then is followed by a video about the metals where pupils will be required to answer questions, these can then be self-assessed. Next, the PowerPoint slides explain why, in terms of electronic configuration, the alkali metals increase in reactivity as you go down the group. Pupils can summarise this information using a fill-in-the-blank task, which can then be self-assessed. The reaction with alkali metals can then be modelled (practically you can show a demo of this) and pupils will need to be able to complete the word equation for this reaction, using a worked example of lithium and water pupils will need to fill int he word equations for other alkali metals. This work can be self-assessed. Pupils will then be given a set of information about the properties of alkali metals and about their reaction with oxygen and chlorine. Using this information pupils will need to complete questions, as well as compete work equations showing the reaction of various alkali metals with either oxygen or chlorine. Again, all answers to this work is provided so pupils can self or peer assess their work… The plenary task is a true or false task, which pupils could complete on their own at the back of their books. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson which meets specification points within the OCR Gateway Science - B1 -Cell-Level Systems SoW. The lesson begins by pupils using posters around the room to complete a levelled worksheet on the structure and function of animal and plant cells. Pupils will then peer-assess their work, providing feedback of the grade each pupil achieved and ways to improve their work. Pupils will then complete a ‘revision’ task in the back of their books, they will need to stick in a sheet and match the structure to the function. Pupils can self-assess their work. The final task, an assessment task, involves pupils answering a past-paper questions. They should try and do this with their book closed to test their knowledge of what they have learnt this lesson. Pupil can then either peer-assess or self-assess their work. All resources are included, please review with any feedback :)

This lesson is designed for the NEW OCR GCSE (Gateway Science) Biology B1 ‘Cell-level systems’ SoW. This lesson begins with a review of magnification and resolving power, as well as defining the two main advantages of the electron microscope. The following slides offer detailed notes on the parts of the electron microscope and their functions. Students will then fill in a table in their books using information notes which have been posted around the room. A self-assessment slide follows! To consolidate the lesson, students will complete an exam-style question and self-assess to the following slide. The plenary task is a series of answers for students to write the questions for. All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a lesson designed to meet specification points for the new OCR GCSE (Gateway Science) Biology B1 - ‘Cell-level systems’ SoW. For more resources please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by pupils completing a comprehension task, they will need to read details on the history of the microscope and answer questions into their books. Once finished pupils will need to then self-assess their work using the answers provided in the PowerPoint presentation. The next part of the lesson focuses on the structure of a light microscope, and how to use it to view a specimen, including different ways in which stains can be used in light microscopy. Students will watch a video, and will need to answer questions in their books, before self-assessing their work. Pupils are then introduced to the idea of ‘resolution’ - the definition for which they need to know so pupils could write this down in their books. The next part of the lesson will focus more on maths skills related to microscopy, pupils will firstly need to calculate the overall magnification of a microscope using the objective lens and eyepiece lens magnifications. The next skill pupils will learn is to change units of measurement from cm > mm > um > nm. The next calculation pupils will need to know is how to calculate the actual size of a specimen being observed down a microscope. Pupils will be introduced to the calculation and then given a couple of example questions, pupils can attempt to have a go at these themselves. The following slide goes through step-by-step how you would calculate the answers to these questions. The plenary is a ‘Silent 5’ task where pupils will need to answer questions based upon what they have learnt during the lesson.

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.2 unit on ‘Motion & Pressure’. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated.

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a demonstration, students will be shown a demo whereby alkali metals are dropped in water one at a time, students need to note down their observations in a table. Once this is complete, students will be asked to predict what happens when francium and caesium are dropped in water, students will then watch a video to check whether their answer is correct. Students will now be shown the general word equation for a metal + water, students will now be asked to copy and complete a set of further metal + water word equations. This task can then be assessed using the mark scheme provided. Next, students will be given a set of statements and a number of grouped metals, knowing what they do about the reactivity of these metals with oxygen and with acid (from previous lessons) students will be asked to match the groups of metals to the correct statements - describing their relative reactivity. Once this task has been completed, students can self-assess their work using the mark scheme provided. Following this, students will need to use the statements provided to describe the way in which these metals react with dilute acid, once this task is complete students can self-assess their work. Students will now be shown the word equation for the reaction of metal with steam, including the balanced symbol equation, with state symbols. Students will be asked to then write out the balanced symbol equation for zinc + steam, the answer to this will be provided so students can mark their work. Lastly, students are given a set of sentence starters (metals) and they will need to match these to the correct sentence enders (description of the metal). This work can be marked and corrected using the mark scheme provided. The plenary task requires students to write down three facts, three key words and one question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.2 unit on ‘Metals & Other Materials’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a task whereby students will walk around the room looking at different objects, as a circus activity. Students need to use the key words included on the board to describe these objects, there work can be marked and assessed once it is complete. Now, students are introduced to ‘ceramics’ as a material, they are given examples of objects which are made out of ceramic material and are asked to ‘Think > Pair > Share’ their ideas over what physical properties they may have. Once this task is complete, the physical properties and chemical properties of ceramics will be given to students to make a note of. Students now each be given a piece of information on a ceramic material and its uses, they will need to walk around the room and share information with each other to complete a summary table of information. This can then be marked and assessed using the mark scheme provided. Students will now be shown a diagram which demonstrates the structural qualities of ceramic materials, this explains why they have such high melting points. Students can sketch the diagram into their books and make a note of the details provided. Lastly, students will be need to complete a ‘copy and correct’ task. This requires students to copy out a piece of text, making any amendments they deem necessary so that the paragraph makes sense. This work can the be self-assessed using the mark scheme provided. The plenary task is for students to spend a minute talking to each other about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This a revision lesson aimed at AQA B1 Core Science topics on nervous and hormonal control. Pupils begin the lesson looking at the differences between nervous and hormonal control and assessing their current knowledge on the topics by looking at a set of learning objectives and marking them green, amber or red. Students then go on to complete a revision worksheet on the topic areas and will then re-assess their ability to meet the learning objectives, hopefully showing progress! The page numbers to help the students complete the work are on the sheet, these page numbers are specific to the green Science A text books for the AQA course. Pupils will finish the lesson by completing a past-paper question and peer-assessing their work.

This is a bundle of whole lessons and resources which meets all specification points for the NEW AQA GCSE Chemistry Combined Science Trilogy course for the ‘Atomic Structure & Periodic Table’, ‘Structure & Bonding’, ‘Quantitative Chemistry’, ‘Chemical Changes, Electrolysis and Energy Changes’ and ‘Rates of Reaction’ SoW. This bundle includes 41 lessons, which is around 12 weeks worth of work, with all additional resources included. The lessons contain a mix of differentiated activities, progress checks, extra challenge tasks, exam-style questions and more than one opportunity, per lesson, for self/peer red-pen assessment of tasks as answers/mark schemes have been provided within the PowerPoint slides. I have published a similar ‘Big Bundle’ of lessons for the AQA GCSE Biology Combined Science Trilogy course. I have had many purchases of this big bundle along with 6 detailed 4-5* reviews, see link for further details:https://www.tes.com/teaching-resource/new-aqa-gcse-biology-big-bundle-cells-organisation-infection-and-response-bioenergetics-lessons-11701963. This set of lessons is of the same standard! Thank you for looking, please ask any questions via the comments section if you need to :)