A pair of lessons and a worksheet covering sections 5.1.4 a-i of the OCR Physics specification- the gas laws It covers: The gas laws The ideal gas Kinetic theory The effect of newtons Laws Internal energy PAG 8 The two lessons and the PAG take around 5 hours in total. All answers are included I generally try to reduce copying so other than the worksheet all resources are found in the lesson PPT

A pair of lessons covering content from the AQA Physics and Trilogy higher paper 1 It covers: Energy Power Density Radioactivity Atomic structure Variety of activities. All answers included

A complete lesson covering parts of the AQA trilogy and Physics topic 1- Energy. It covers: Energy transfers Energy stores Specific heat capacity required practical Kinetic energy Elastic potential energy GPE Efficiency Energy resources Includes lots of exam questions All answers included Also incldues the 2022 version of this PPT with some tasks on the national grid and power

A complete lesson revising section 6.4.2 of the AQA Trilogy specification- radiation. It covers types and propeties of radiation, decay equations, half lives and contamination. The lesson includes a variety of activities including tables to complete, exam questions and a short multiple choice quiz. The PPT is designed to reduce copying so all activities are in the presentation.

A complete revision lesson covering section 4.2.4 of the AQA trilogy and Physics specification- power, energy transfers and the national grid. It covers: A recap of the energy stores Energy transfers IV characteristic graphs for bulb, diode and fixed resistor IV characteristic RPA Power equations with practise Energy transfer equations with practise Transformers Some slides have instructions as to how to reveal the animations All answers provided Hope you like the basset hounds

A complete revision lesson covering electromagnetic waves from AQA topic P6. It is suitable for both Trilogy and single science. The lesson opens by reminding students about the order of EM waves and their properties and dangers. There are then a couple of question based activities. The lesson then looks at X-rays and radio waves in particular using exam questions to cover ideas that regularly come up on exams (dosage and communication). The lesson then moves on to required practical 21 which is investigating infrared radiation. This is covered in two ways- on concerning absorption and the other emission along with accompanying activities. The lesson closes with a reminder of the wave speed equation in the context of a ripple tank. All answers included This lesson is designed to require no photocopying Edited 09/05- additional question slides and answers added

This is a complete lesson covering sections 6.5.1 a-g of the OCR Physics specification- medical imaging using X-rays. It starts by introducing an X-ray tube and explaining how they work. It then moves onto varying the intensity of X-ray beams and how they can be used to produce images. Attenuation is the next topic along with a series of calculations. The lesson closes with looking at CAT scans and how they differ from X-rays. Each section has questions including exam style questions. The lesson includes a starter, full notes, various student led activities and a differentiated summary at the end. All answers are included. I actively try to reduce photocopying, so all of the lesson resources are within the PowerPoint rather than as extra sheets.

This is a complete lesson covering sections 6.4.1 d, e, f, g and h of the OCR Physics specification- the decay equation and half-life. It starts by introducing the decay equation with worked examples before outlining how dice simulation can be used to model nuclear decay. The lesson then moves to looking at activity as an alternative expression for the decay equation. Half-lives are then covered including how to calculate it and how to work it out form a graph. The lesson closes by looking at how age can be assessed using C-14 dating. The lesson includes a starter, full notes, various student led activities and a differentiated summary at the end. All answers are included. I actively try to reduce photocopying, so all of the lesson resources are within the PowerPoint rather than as extra sheets.

This is a complete lesson covering sections 6.3.3 e and f of the OCR A level Physics specification- uses of electromagnetic induction. It opens by considering a simple alternator as a means of generating electricity. It then goes on to discuss transformers and the transformer equation including how to derive the transformer equation from Faraday’s law and the power equation. It discusses ways of investigating transformers and can act as an introduction to Physics PAG 11.1. The lesson closes by considering transformers in the national grid and at home. The lesson includes a starter, full notes, various student led activities and a differentiated summary at the end. All answers are included. I actively try to reduce photocopying, so all of the lesson resources are within the PowerPoint rather than as extra sheets.

This is a complete lesson covering sections 6.3.3 c and d of the OCR A level Physics specification- electromagnetism. It opens by considering Faraday’s law both mathematically and verbally including examples. It also discussed how e.m.f. and flux linkage can be calculated graphically. It discusses how magnetic flux can be investigated experimentally. The lesson then moves on to Lenz’s law and how using that, and Flemings left hand rule, you can work out the direction of the e.m.f. The lesson includes a starter, full notes, various student led activities and a differentiated summary at the end. All answers are included. I actively try to reduce photocopying, so all of the lesson resources are within the PowerPoint rather than as extra sheets.

This is a complete lesson covering sections 6.3.3 a and b of the OCR A level Physics specification- electromagnetism. It covers how to calculate magnetic flux from the flux density and area and how then to apply this to generation of an e.m.f… The lesson then goes on to calculate magnetic flux linkage both when the flux is perpendicular to the area of the loop and when they are at another angle. The lesson includes a starter, full notes, various student led activities and a differentiated summary at the end. All answers are included. I actively try to reduce photocopying, so all of the lesson resources are within the PowerPoint rather than as extra sheets.

This is a complete lesson covering sections 6.3.2 a, b and c of the OCR Physics specification- the effect of magnetic fields on moving charged particles. It goes through how to calculate the force on a moving particle as well as an explanation of why the path is likely to be curved. It also covers how to calculate the curvature of the pathway as well as some application questions asking students to predict the effect of changes on the curvature. The lesson finished with introducing velocity selectors and how they work including the necessary calculations. This links magnetic and electric fields The lesson includes a starter, full notes, various student led activities and a differentiated summary at the end All answers are included I actively try to reduce photocopying, so all of the lesson resources are within the PowerPoint rather than as extra sheets

This is a complete lesson covering sections 6.3.1 e and f of the OCR Physics specification- magnetic fields. It goes through how to calculate magnetic flux density both with current perpendicular to the magnetic field as well as at an angle (sin θ). It also shows how to measure magnetic flux density as well as taking students through a worked example of the practical results. The lesson includes a starter, full notes, various student led activities and a differentiated summary at the end All answers are included I actively try to reduce photocopying, so all of the lesson resources are within the PowerPoint rather than as extra sheets

This is a complete lesson covering sections 6.3.1 a -d of the OCR Physics specification- magnetic fields. It goes through how to show the magnetic field round long straight conductors, flat coils, a solenoid and bar magnets. It shows how to use Flemming’s left hand rule to predict the direction of a force created when a current runs perpendicular to a magnetic field. The lesson includes a starter, full notes, various student led activities and a differentiated summary at the end All answers are included I actively try to reduce photocopying, so all of the lesson resources are within the PowerPoint rather than as extra sheets

A set of three lessons covering the complete set of specification points in OCR Physics section 6.2- electric fields IT covers: Point and spherical charges Coulombs law including calculating the force between point charges and the electric field strength of a point charge Uniform electric field strength including calculating uniform field strength and the charge of a parallel plate capacitor Electric potential and energy Each lesson includes a starter, full detailed notes, various student activities including exam questions and a differentiated summary at the end I am in favour of reducing photocopying so all activities are embedded into the main PPT

A full lessons covering section 6.1 of the OCR Physics specification- capacitors. This particular lesson covers sections c, d, e and a, b and c- energy in circuits. This includes the circuits for calculating work done using charge and voltage, charge and current and voltage and capacitance. also covers how to calculate total capacitance in series and parallel. The lesson includes a starter, full notes, lots of student activities including exam questions and a differentiated summary at the end All answers provided

A complete lesson covering section 6.1 of the OCR Physics specification- capacitors. This lesson specifically covers points b, c, d and which is the equations covering charging and discharging of capacitors. It introduces the equations for calculating charge, current and voltage at different times during charge and discharge. It also covers the time constant- what it means and how to calculate it. The lesson includes a starter, full notes, a variety of student activities, lots of exam questions and a differentiated summary at the end. All answers included

A double lesson covering sections 6.1.1c, d and e and 6.1.3a of the OCR Physics specification- investigating capacitors. It covers PAG 9.1 and PAG 9.2 which are investigating capacitors in series and parallel as well as discharging and charging capacitors. The lesson includes full notes and methods, student activities, analysis activities and a differentiated summary at the end. All answers included.