This is two A level Product design questions, featuring questions around the subject of Bio-polymers, the topical subject has appeared more frequently recently. This consists of thee A3 sheets one is a question sheet with two longer format questions and the other two sheets contain full marking guidance and tips from the examiner. This then enables students to complete the questions and then ideally peer mark the response. These sheets would be ideal for a stand alone A level question or as revision work.

A level Product Design Modeling and Prototyping Exam Type questions These sheets is about modeling and prototyping. This resource consists of three A3 sheets , with two exam type questions and two sheets of very comprehensive mark schemes which relate to the two questions. These are exam type questions that relate to designers and how they communicate their ideas to stakeholders such as clients. Although the two questions on this sheet paper similar at first glance they both require completely different answers. students can answer questions and use the mark schemes to mark and amend their answers.

Composite Materails GCSE D&T Question and Walkthrough A GCSE Design and Technology questions on Composite materials, complete with Youtube walkthrough . A4 GCSE type questions and an A5 learning check to use in a subsequent lesson. This is supported by a short walkthrough clip on my Youtube Channel. This would also be of some use for A level product design students.

This resource covers types of production Mass/Batch /One off , for GCSE D&T or perhaps KS3. This comprises an A3 worksheet a A5 Learning check sheet. and an A4 revision question sheet. this sheet was created to Introduce types of production for GCSE D&T. there is a YouTube clip " Methods of production" and also a walkthough clip for the A5 Learning check clip.

This resource covers GCSE type questions around the subject of metal processes. It includes methods of joining metals, finish metals and a link to offshore manufacture with a mixed question which is typical of all exam boards. These Metal processes questions are featured in GCSE Design and Technology, Product design and GCSE Engineering papers, so these worksheets would be suitable for students sitting any one of these. As usual my worksheets are supported by YouTube clips. I have included a question walkthrough for some of the main questions, these walkthroughs allow students to follow a structured approach to dealing with these type of questions. I have also linked a subject knowledge clip on poprivieting which is featured on the worksheet. What’s included; A3 sheet Metal processes. A4 Learning Review sheet (2X A5) Metal processes

KD fittings and Knock down Furniture for GCSE Design and Technology . An A3 worksheet covering this subject and an A5 learning review sheet. This is linked to two 5 minute YouTube clip on my Channel Mr Ridley’s Design and Technology, one clip covers the worksheet and the other covers the learning review. This is for KS4 GCSE D&T. It could also be used as an introduction to the subject for KS5 product Design students.

GCSE D&T Exam Design Question Barbeque Tools An A3 sheet containing GCSE style questions relating to the design of products. These questions relate to processes of manufacturing materials and ergonomic design. This sheet is supported by a YouTube walkthrough and also a clip relating to ergonomics of barbeque tools. This can be used a a part of a GCSE D&T lesson

An A3 worksheet on the topic of computer game design. This sheet would support a lesson in Design and Technology or Art subject areas. This would make an ideal lesson as part of a computer game design project, or as a standalone or cover lesson. The object of the lesson is to design a monster character for a space themed computer game. The student’s are prompted on the sheet to consider the features of the monster that will make the game more interesting and enjoyable to play. There is also a link on the sheet to possible career paths for game design included in the sheet which could promote classroom discussion or be utilised prior to the end of KS3 options.

A set of seven A4 sheets that cover industrial production, lean manufacturing, and just in time manufacturing. These comprise a mix of exam type questions and scaffolding for note taking. I created these to work with the clips on my Youtube channel. This resource can be used in a Product design lesson in the classroom. Alternatively they could be set as home learning to consolidate the knowledge by providing the students with sheets and embedding the clips from Youtube into a Google classroom.

The manufacture of Iron and steel Home learning resource for GCSE A complete resource for students to complete a home learning task to understand the process of converting iron ore into steel. With a limited time to cover all areas of the specification for GCSE Design and Technology, Product Design or Engineering, it is useful to set some of the required areas for home learning tasks. This resource contains an A3 working sheet and an additional A4 support sheet which highlights the 5 main stages of the production of steel from iron ore. The home learning task is also supported by a Youtube clip which I created to provide additional support for students. You get; A3 working sheet A4 support sheet

A home learning resource for GCSE D&T involving a brands investigation. This is a major home learning task that covers brands , typically this could be set over a half term as a longer home learning task. This then covers this area which is a GCSE requirement in all GCSE D&T specifications. Included is an A3 worksheet and a copy of an exemplar completed task. This clip is also available on my YouTube channel

Worksheets and a learning checklist for GCSE Design and Technology. I created these sheets to cover primarily Ergonomics and Anthropometrics, but they also cover the materials and construction and sustainability of the products featured. There are three accompanying YouTube Clips that cover ergonomics, materials and construction of toothbrushes and bbq tools. An A5 learning checklist is also included for revisiting the subject. Suitable for all GCSE Design and Technology specifications.

Ergonomics For GCSE D&T A pack of resources covering Ergonomics and Anthropometrics for GCSE Design & Technology. This consists of two A3 worksheets and an A5 learning check which can be completed later to check and consolidate learning. The worksheets are supported by two clips on my Youtube channel which show the important Ergonomic features of two example Products toothbrushes and Barbeque tools. These sheets could be used as a two lesson mini project to introduce Ergonomics and Anthropometrics for GCSE. Some tasks on the sheet could be set as Home learning if supported by one of the YouTube Clips. Other Youtube clips are available on my channel.

This resource consists of three A3 sheets for GCSE Design and Technology or Product Design. One sheet has two GCSE exam type questions that relate to environmental impact and consumer choice. the two other sheets are full mark schemes for the two questions This type of questions may feature in papers because these issues are currently very topical . Q2 also relates to the properties of two materials (Bamboo and polypropylene ), It is possible that these type of questions may feature in future exams. The questions also relate to more sustainable products offered by high street retailers. the clip offers a walk though with a clear point that students can stop the clip and answer the question which can be useful for Independent revision.