We understand the importance of education. We offer tailored private tuition designed to maximise success at GCSE, A Level and beyond. Our tutors are experienced professionals, teachers and top-tier graduates with extensive knowledge in their subjects.
On Tes we offer high quality board-specific resources. Please check back regularly as we are continually updating our stock.
We understand the importance of education. We offer tailored private tuition designed to maximise success at GCSE, A Level and beyond. Our tutors are experienced professionals, teachers and top-tier graduates with extensive knowledge in their subjects.
On Tes we offer high quality board-specific resources. Please check back regularly as we are continually updating our stock.
The complete Edexcel IGCSE Physics course from start to finish. Huge bundle of resources with every topic covered.
Be sure to check out our presentations!
Complete set of companion PDF worksheets for Edexcel IGCSE Physics (4PH1) Chapters 1 - 8. This pack contains 33 worksheets, including:
1 - Distance and Speed
2 - Acceleration
3 - Forces
4 - Balanced and Unbalanced Forces
5 - Gravity, Weight and Drag
6 - Hooke’s Law
7 - Momentum
8 - Forces and Moments
9 - Mains Electricity
10 - Power, Current and Voltage
11 - Circuits Part 1
12 - Circuits Part 2
13 - Static Electricity
14 - Waves
15 - Electromagnetic Waves
16 - Reflection and Refraction
17 - Sound Waves
18 - Energy
19 - Thermal Energy
20 - Work and Power
21 - Sources of Energy
22 - Density and Pressure
23 - Changes of State
24 - Ideal Gases
25 - Magnetism
26 - Electromagnets Part 1
27 - Electromagnets Part 2
28 - Radioactivity Part 1
29 - Radioactivity Part 2
30 - Fission and Fusion
31 - The Universe
32 - The Evolution of Stars
33 - Cosmology
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 5.3 - Know and use the relationship between density, mass and volume.
Specification Point 5.4 - Practical: investigate density using direct measurements of mass and volume.
Specification Point 5.5 - Know and use the relationship between pressure, force and area.
Specification Point 5.6 - Understand how the pressure at a point in a gas or liquid at rest acts equally in all directions.
Specification Point 5.7 - Know and use the relationship for pressure difference.
Complete set of Chapter 5 Lessons are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 6.8 - Know that an electric current in a conductor produces a magnetic field around it.
Specification Point 6.12 - Understand why a force is exerted on a current-carrying wire in a magnetic field, and how this effect is applied in simple D.C. electric motors and loudspeakers.
Specification Point 6.13 - Use the left-hand rule to predict the direction of the resulting force when a wire carries a current perpendicular to a magnetic field.
Specification Point 6.14 - Describe how the force on a current-carrying conductor in a magnetic field changes with the magnitude and direction of the field and current.
Specification Point 6.15 - Know that a voltage is induced in a conductor or a coil when it moves through a magnetic field or when a magnetic field changes through it and describe the factors that affect the size of the induced voltage.
Specification Point 6.16 - Describe the generation of electricity by the rotation of a magnet within a coil of wire and of a coil of wire within a magnetic field, and describe the factors that affect the size of the induced voltage.
Complete set of Chapter 6 Lessons are available.
Complete set of concise, modern presentations and associated PDF worksheets for Edexcel IGCSE Physics (4PH1) Chapter 6 - Magnetism and Electromagnetism. Contains colour coded specification points with handmade vector graphics. Three presentations and companion worksheets included:
25 - Magnetism
26 - Electromagnets Part 1
27 - Electromagnets Part 2
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 8.11P - Understand how the brightness of a star at a standard distance can be represented using absolute magnitude.
Specification Point 8.12P - Draw the main components of the Hertzsprung–Russell diagram.
Specification Point 8.13P - Describe the past evolution of the universe and the main arguments in favour of the Big Bang theory.
Specification Point 8.14P - Describe evidence that supports the Big Bang theory.
Specification Point 8.15P - Describe that if a wave source is moving relative to an observer, there will be a change in the observed frequency and wavelength.
Specification Point 8.16P - Use the equation relating to change in wavelength, reference wavelength, velocity of a galaxy and the speed of light.
Specification Point 8.17P - Describe the red-shift in light received from galaxies at different distances away from the Earth.
Specification Point 8.18P - Explain why the red-shift of galaxies provides evidence for the expansion of the universe.
Complete set of Chapter 8 Lessons are available.
Complete set of companion PDF worksheets for Edexcel IGCSE Physics (4PH1) Chapter 7 - Radioactivity. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Three worksheets included:
28 - Radioactivity Part 1
29 - Radioactivity Part 2
30 - Fission and Fusion
Complete set of concise, modern presentations for Edexcel IGCSE Physics (4PH1) Chapter 7 - Radioactivity. Contains colour coded specification points. Three presentations included:
28 - Radioactivity Part 1
29 - Radioactivity Part 2
30 - Fission and Fusion
A useful resource for students to practice their knowledge and examination technique for future external assessments - the complete series!
This is for the following papers: 4BI1 – 1B, 2B; 4CH1 – 1C, 2C; 4PH1 – 1P, 2P.
These questions are completely original and have been designed from scratch. There has been no reuse of previous exam questions.
For 1B:
Our mock paper follows the format of the true Edexcel IGCSE Biology 1B paper closely, with the CORMS and graph question included. It is also the exact duration and mark-count, with questions of increasing difficulty. A mark scheme is also attached.
The paper covers the following specification points:
• Topic 2d - Movement of substances into and out of cells (including practical 2.17 (2.15 – 2.17)
• Topic 2g - Gas exchange (including practical 2.50) (2.46 – 2.50)
• Topic 2h - Transport (2.51 – 2.54, 2.59 – 2.62, 2.65 – 2.69)
• Topic 2j - Co-ordination and response (2.80 – 2.94)
• Topic 3a - Reproduction (3.1 – 3.9, 3.11 – 3.13)
• Topic 3b - Inheritance (3.14 – 3.15, 3.19 – 3.20, 3.22 – 3.34, 3.38 – 3.39)
• Topic 5b - Selective breeding (5.10 – 5.11)
For 2B:
Our mock paper follows the format of the true Edexcel IGCSE Biology 2B paper closely. The obligatory comprehension question is also included. A mark scheme is also attached.
The paper covers the following specification points:
• Topic 2c Biological molecules (including practical 2.9 and practical 2.14B) (2.7 – 2.14B)
• Topic 2g Gas exchange (including practical 2.45B) (2.40B – 2.50)
• Topic 2i Excretion (2.70 – 2.79B)
• Topic 3b Inheritance (3.14 – 3.39)
• Topic 4c Cycles within ecosystems (4.10 – 4.11B)
• Topic 4d Human influences on the environment (4.12 – 4.18B)
For 1C:
Our mock paper follows the format of the true Edexcel IGCSE Chemistry 1C paper closely. It is also the exact duration and mark-count, with questions of increasing difficulty. A mark scheme is also attached.
The paper covers the following specification points:
• Topic 1a - States of matter (1.1 – 1.4)
• Topic 1c - Atomic structure (1.14 – 1.17)
• Topic 1e - Chemical formulae, equations and calculations (including practical 1.36) (1.25 – 1.33, 1.36)
• Topic 1g - Covalent bonding (1.44 – 1.51)
• Topic 2c - Gases in the atmosphere (2.9 – 2.14)
• Topic 2h - Chemical tests (2.44 – 2.50)
• Topic 3b - Rates of reaction (3.9 – 3.13)
• Topic 4b - Crude oil (4.7 – 4.18)
• Topic 4c - Alkanes (4.19 – 4.22)
For 2C:
Our mock paper follows the format of the true Edexcel IGCSE Chemistry 2C paper closely. It is also the exact duration and mark-count, with questions of increasing difficulty. A mark scheme is also attached.
The paper covers the following specification points:
• Topic 1e - Chemical formulae, equations and calculations (1.25 – 1.36)
• Topic 1i - Electrolysis (1.55C – 1.60C)
• Topic 2b - Group 7 (2.5 – 2.8C)
• Topic 2c - Gases in the atmosphere (2.9 – 2.14)
• Topic 2e - Extraction and uses of metals (2.22C – 2.27C)
• Topic 2f - Acids, alkalis and titrations (2.28 – 2.33C)
• Topic 2h - Chemical tests (2.44 – 2.50)
• Topic 3a - Energetics (including practical 3.8) (3.1 – 3.8)
• Topic 4f - Carboxylic acids (4.34C – 4.37C)
• Topic 4h - Synthetic polymers (4.44 – 4.50C)
For 1P:
Our mock paper follows the format of the true Edexcel IGCSE Physics 1P paper closely. It is also the exact duration and mark-count, with questions of increasing difficulty. A mark scheme is also attached.
The paper covers the following specification points:
• Topic 1b - Movement and position (including practical 1.5) (1.3 – 1.10)
• Topic 2c - Energy and voltage in circuits (2.7 – 2.21)
• Topic 3b - Properties of waves (3.2 – 3.9)
• Topic 4b - Energy transfers (4.2 – 4.10)
• Topic 5b - Density and pressure (5.3 – 5.7)
• Topic 7b - Radioactivity (7.2 – 7.15)
• Topic 8b - Motion in the universe (8.2 – 8.6)
For 2P:
Our mock paper follows the format of the true Edexcel IGCSE Physics 2P paper closely. It is also the exact duration and mark-count, with questions of increasing difficulty. A mark scheme is also attached.
The paper covers the following specification points:
• Topic 1c - Forces, movement, shape and momentum (1.11 – 1.33P)
• Topic 3d - Light and sound (including core practical 3.27P) (3.14 – 3.29P)
• Topic 5c - Changes of state (including practicals 5.11P and 5.14P) (5.8P – 5.14P)
• Topic 6d - Electromagnetic induction (6.15 – 6.20P)
• Topic 7c - Fission and fusion (7.17 – 7.26)
• Topic 8d - Cosmology (8.13P – 8.18P)
Disclaimer: This document was created by department heads with many years of experience teaching the Pearson Edexcel IGCSE Science course. We cannot however guarantee that it is an accurate representation of upcoming examinations and students should not treat it as such. Please use this as an aid, alongside other methods of revision.
A useful resource for students to practice their knowledge and examination technique for future external assessments.
This is for the following paper: 4PH1 - 1P
This mock is based on our 2022 Predicted Papers.
These questions are completely original and have been designed from scratch. There has been no reuse of previous exam questions.
Our mock paper follows the format of the true Edexcel IGCSE Physics 1P paper closely. It is also the exact duration and mark-count, with questions of increasing difficulty. A mark scheme is also attached.
The paper covers the following specification points:
• Topic 1b - Movement and position (including practical 1.5) (1.3 – 1.10)
• Topic 2c - Energy and voltage in circuits (2.7 – 2.21)
• Topic 3b - Properties of waves (3.2 – 3.9)
• Topic 4b - Energy transfers (4.2 – 4.10)
• Topic 5b - Density and pressure (5.3 – 5.7)
• Topic 7b - Radioactivity (7.2 – 7.15)
• Topic 8b - Motion in the universe (8.2 – 8.6)
Disclaimer: This document was created by department heads with many years of experience teaching the Pearson Edexcel IGCSE Physics course. We cannot however guarantee that it is an accurate representation of upcoming examinations and students should not treat it as such. Please use this as an aid, alongside other methods of revision.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 3.1 - Use the following units: degree (°), hertz (Hz), metre (m), metre/second (m/s) and second (s).
Specification Point 3.2 - Explain the difference between longitudinal and transverse waves.
Specification Point 3.3 - Know the definitions of amplitude, wavefront, frequency, wavelength and period of a waves.
Specification Point 3.4 - Know that waves transfer energy and information without transferring matter.
Specification Point 3.5 - Know and use the relationship between the speed, frequency and wavelength of a wave.
Specification Point 3.6 - Use the relationship between frequency and time period.
Complete set of Chapter 3 Lectures are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 18 - Energy. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 4.1 - Use a variety of energy units.
Specification Point 4.2 - Describe energy transfers involving energy stores.
Specification Point 4.3 - Use the principle of conservation of energy.
Specification Point 4.4 - Know and use the relationship between efficiency, useful energy output and total energy output.
Specification Point 4.5 - Describe a variety of everyday and scientific devices and situations, explaining the transfer of the input energy in terms of the above relationship, including their representation by Sankey diagrams.
Complete set of Chapter 4 Worksheets are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 31 - The Universe. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 8.2 - Know that the universe is a large collection of billions of galaxies, that a galaxy is a large collection of billions of stars and that our solar system is in the Milky Way galaxy.
Specification Point 8.3 - Understand why gravitational field strength, g, varies and know that it is different on other planets and the Moon from that on the Earth.
Specification Point 8.4 - Explain that gravitational force causes moons to orbit planets, causes the planets to orbit the Sun, causes artificial satellites to orbit the Earth and causes comets to orbit the Sun.
Specification Point 8.5 - Describe the differences in the orbits of comets, moons and planets.
Specification Point 8.6 - Use the relationship between orbital speed, orbital radius and time period.
Complete set of Chapter 8 Worksheets are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 8.2 - Know that the universe is a large collection of billions of galaxies, that a galaxy is a large collection of billions of stars and that our solar system is in the Milky Way galaxy.
Specification Point 8.3 - Understand why gravitational field strength, g, varies and know that it is different on other planets and the Moon from that on the Earth.
Specification Point 8.4 - Explain that gravitational force causes moons to orbit planets, causes the planets to orbit the Sun, causes artificial satellites to orbit the Earth and causes comets to orbit the Sun.
Specification Point 8.5 - Describe the differences in the orbits of comets, moons and planets.
Specification Point 8.6 - Use the relationship between orbital speed, orbital radius and time period.
Complete set of Chapter 8 Lessons are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 4.1 - Use a variety of energy units.
Specification Point 4.2 - Describe energy transfers involving energy stores.
Specification Point 4.3 - Use the principle of conservation of energy.
Specification Point 4.4 - Know and use the relationship between efficiency, useful energy output and total energy output.
Specification Point 4.5 - Describe a variety of everyday and scientific devices and situations, explaining the transfer of the input energy in terms of the above relationship, including their representation by Sankey diagrams.
Complete set of Chapter 4 Lessons are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 25 - Magnetism. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 6.1 - Use the following units: ampere (A), volt (V) and watt (W).
Specification Point 6.2 - Know that magnets repel and attract other magnets and attract magnetic substances.
Specification Point 6.3 - Describe the properties of magnetically hard and soft materials.
Specification Point 6.4 - Understand the term magnetic field line.
Specification Point 6.5 - Know that magnetism is induced in some materials when they are placed in a magnetic field.
Specification Point 6.6 - Practical: investigate the magnetic field pattern for a permanent bar magnet and between two bar magnets.
Specification Point 6.7 - Describe how to use two permanent magnets to produce a uniform magnetic field pattern.
Complete set of Chapter 6 Worksheets are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 6.1 - Use the following units: ampere (A), volt (V) and watt (W).
Specification Point 6.2 - Know that magnets repel and attract other magnets and attract magnetic substances.
Specification Point 6.3 - Describe the properties of magnetically hard and soft materials.
Specification Point 6.4 - Understand the term magnetic field line.
Specification Point 6.5 - Know that magnetism is induced in some materials when they are placed in a magnetic field.
Specification Point 6.6 - Practical: investigate the magnetic field pattern for a permanent bar magnet and between two bar magnets.
Specification Point 6.7 - Describe how to use two permanent magnets to produce a uniform magnetic field pattern.
Complete set of Chapter 6 Lessons are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 6.1 - Use the following units: ampere (A), volt (V) and watt (W).
Specification Point 6.2 - Know that magnets repel and attract other magnets and attract magnetic substances.
Specification Point 6.3 - Describe the properties of magnetically hard and soft materials.
Specification Point 6.4 - Understand the term magnetic field line.
Specification Point 6.5 - Know that magnetism is induced in some materials when they are placed in a magnetic field.
Specification Point 6.6 - Practical: investigate the magnetic field pattern for a permanent bar magnet and between two bar magnets.
Specification Point 6.7 - Describe how to use two permanent magnets to produce a uniform magnetic field pattern.
Complete set of Chapter 6 Lectures are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 30 - Fission and Fusion. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 7.17 - Know that nuclear reactions, including fission, fusion and radioactive decay, can be a source of energy.
Specification Point 7.18 - Understand how a nucleus of U-235 can be split by collision with a neutron, and that this process releases energy as kinetic energy of the fission products.
Specification Point 7.19 -Know that the fission of U-235 produces two radioactive daughter nuclei and a small number of neutrons.
Specification Point 7.20 - Describe how a chain reaction can be set up if the neutrons produced by one fission strike other U-235 nuclei.
Specification Point 7.21 - Describe the role played by the control rods and moderator in the fission process.
Specification Point 7.22 - Understand the role of shielding around a nuclear reactor.
Specification Point 7.23 - Explain the difference between nuclear fusion and nuclear fission.
Specification Point 7.24 - Describe nuclear fusion as the creation of larger nuclei resulting in a loss of mass from smaller nuclei, accompanied by a release of energy.
Specification Point 7.25 - Know that fusion is the energy source for stars.
Specification Point 7.26 - Explain why nuclear fusion does not happen at low temperatures and pressures, due to electrostatic repulsion of protons.
Complete set of Chapter 7 Worksheets are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 7.17 - Know that nuclear reactions, including fission, fusion and radioactive decay, can be a source of energy.
Specification Point 7.18 - Understand how a nucleus of U-235 can be split by collision with a neutron, and that this process releases energy as kinetic energy of the fission products.
Specification Point 7.19 -Know that the fission of U-235 produces two radioactive daughter nuclei and a small number of neutrons.
Specification Point 7.20 - Describe how a chain reaction can be set up if the neutrons produced by one fission strike other U-235 nuclei.
Specification Point 7.21 - Describe the role played by the control rods and moderator in the fission process.
Specification Point 7.22 - Understand the role of shielding around a nuclear reactor.
Specification Point 7.23 - Explain the difference between nuclear fusion and nuclear fission.
Specification Point 7.24 - Describe nuclear fusion as the creation of larger nuclei resulting in a loss of mass from smaller nuclei, accompanied by a release of energy.
Specification Point 7.25 - Know that fusion is the energy source for stars.
Specification Point 7.26 - Explain why nuclear fusion does not happen at low temperatures and pressures, due to electrostatic repulsion of protons.
Complete set of Chapter 7 Lessons are available.