Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
Lesson power point to cover Edexcel P3.9 - Critical Angle
Specification - examined from 2014
Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.
Lesson power point to cover Edexcel P3.12 - Using X-rays
Specification - examined from 2014
Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.
Lesson power point to cover Edexcel P3.13 - ECG's and pulse oximetry
Specification - examined from 2014
Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.
Lesson power point to cover Edexcel P3.19 - Radiation in hospitals.
Specification - examined from 2014
Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.
AQA C7 (New Spec – Unit 4.7 – Organic chemistry)
Lesson: C7.3 - Cracking and alkanes
Specification points covered = 4.7.1.4 – Cracking and alkenes
A fully resourced lesson about cracking and alkanes to be used when teaching the New specification of AQA C7 (Paper 2, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C7 (New Spec – Unit 4.7 – Organic chemistry)
Lesson: C7.4 - Structure, formulae and reactions of alkenes (Triple only)
Specification points covered = 4.7.2.1 – Structure and formulae of alkenes; 4.7.2.2 – Reactions of alkenes
A fully resourced lesson about the structure, formulae and reactions of alkenes to be used when teaching the New specification of AQA C7 (Paper 2, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C7 (New Spec – Unit 4.7 – Organic chemistry)
Lesson: C7.8 - Addition polymerisation (Triple only)
Specification points covered = 4.7.3.1 – Addition polymerisation
A fully resourced lesson about addition polymerisation to be used when teaching the New specification of AQA C7 (Paper 2, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C7 (New Spec – Unit 4.7 – Organic chemistry)
Lesson: C7.9 - Condensation polymerisation (HT) (Triple only)
Specification points covered = 4.7.3.2 – Condensation polymerisation (HT)
A fully resourced lesson about condensation polymerisation to be used when teaching the New specification of AQA C7 (Paper 2, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C5 (New Spec – Unit 4.5 – Energy Changes)
Lesson: C5.4 - Fuel Cells (Triple only)
Specification points covered = 4.5.2.2 – Fuel Cells (Triple only)
A fully resourced lesson about fuel cells to be used when teaching the New specification of AQA C5 (Paper 1, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New GCSE Spec
Entire resources to cover all content in paper 1 of the new GCSE specifications.
All lessons for all 5 topics, including any worksheets, practical order information to support in teaching these topics.
Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
Specification points covered are:
Topic 1 - Atomic structure and the periodic table:
4.1.1.1 - atoms, elements and compounds
4.1.1.2 - Mixtures
4.1.1.3 - Scientific models of the atom
4.1.1.4 - relative electrical charges of subatomic particles
4.1.1.5 - size and mass of atoms
4.1.1.6 - electronic structure
4.1.2.1 - The periodic table
4.1.2.2 - development of the periodic table
4.1.2.3 - metals and non-metals
4.1.2.4 - Group 0
4.1.2.5 - Group 1
4.1.2.6 - Group 7
Chemistry Triple science lessons:
4.1.3.1 + 2 - Transition metals and their properties
Topic 2 - Bonding structure and the properties of matter:
4.2.1.1 – Chemical bonds
4.2.1.2 – Ionic bonding
4.2.1.3 – Ionic compounds
4.2.1.4 – Covalent bonding
4.2.1.5 – Metallic bonding
4.2.2.1 – Three states of matter
4.2.2.2 – State symbols
4.2.2.3 – Properties of ionic compounds
4.2.2.4 – Simple covalent substances
4.2.2.5 – Polymers
4.2.2.6 – Giant covalent substances
4.2.2.7 – Properties of metals and alloys
4.2.2.8 – Metals as conductors
4.2.3.1 – Diamond
4.2.3.2 – Graphite
4.2.3.3 – Graphene and fullerenes
Chemistry Triple science lessons:
4.2.4.1 – Sizes of particles and their properties
4.2.4.2 – Uses of nanoparticles
Topic 3 - Quantitative Chemistry:
4.3.1.1 – Conservation of mass and balanced chemical equations (C3.1 lesson)
4.3.1.2 – Relative formula mass (C3.2 lesson)
4.3.1.3 – Mass changes when a reactant or product is a gas (C3.1 lesson)
4.3.2.1 – Moles (Higher tier) (C3.3 lesson)
4.3.2.2 – Amount of substances in equations (Higher tier) (C3.4 lesson)
4.3.2.3 – Using moles to balance equations (Higher tier) (C3.5 lesson)
4.3.2.4 – Limiting reactants (HT) (C3.5 lesson)
4.3.2.5 – Concentration of solutions (C3.6 lesson)
Chemistry Triple science specification points and lessons:
4.3.4 – Using concentrations of solutions in mol/dm3 (HT) (C3.7 lesson)
4.3.3.1 – Percentage yield (C3.8 lesson)
4.3.3.2 – Atom economy (C3.9 lesson)
4.3.5 – Molar volume of gases (HT) (C3.10 lesson)
Topic 4 - Chemical changes
4.4.1.1 - Metal Oxides (C4.1 lesson)
4.4.1.2 - The reactivity series (C4.1 lesson)
4.4.1.3 - Extraction of metals and reduction (C4.2 lesson)
4.4.1.4 - Oxidation and reduction in terms of electrons (HT only) (C4.3 lesson)
4.4.2.1 - Reactions of acids with metals (C4.4 lesson)
4.4.2.2 - Neutralisation of acids and salt production (C4.5 lesson)
4.4.2.3 - Soluble salts (C4.5 lesson)
4.4.2.4 - The pH scale and neutralisation (C4.6)
4.4.2.5 - Titrations (Triple only) (C4.7 lesson) (Includes required Practical activity 2)
4.4.2.6 - Strong and weak acids (HT only) (C4.8 lesson)
4.4.3.1 - The process of electrolysis (C4.9 lesson)
4.4.3.2 - Electrolysis of molten ionic compounds (C4.9 lesson)
4.3.3.3 - Using electrolysis to extract metals (C4.10 lesson)
4.4.3.4 - Electrolysis of aqueous solutions (C4.9 lesson)
4.4.3.5 - Representation of reactions as half equations (HT only)(C4.9 lesson)
4.4.3.4 - Required practical 3 (C4.11 lesson)
Topic 5 - Energy Changes:
4.5.1.1 – Energy transfer during exothermic and endothermic reactions(C5.1 lesson. Includes required practical 4)
4.5.1.1 - Uses of exothermic and endothermic reactions (C5.1 research task)
4.5.1.2 – Reaction profiles (C5.2 lesson)
4.5.1.3 - The energy changes of a reaction (HT only) (C5.2 lesson)
Chemistry Triple science specification points and lessons:
4.5.2.1 – cells and batteries (C5.3 lesson)
4.5.2.2 - Fuel Cells (C5.4 lesson)
AQA C4 (New GCSE Spec – Unit 4.4 – Chemical changes)
Lesson: C4.5 - Making salts + required practical 1
Specification points covered =
4.4.2.2 - Neutralisation of acids and salt production (C4.5 lesson)
4.4.2.3 - Soluble salts (C4.5 lesson)
Required practical 1
A fully resourced lesson about methods of making salts to be used when teaching the New specification of AQA C4 (Paper 1, Topic 4).
Fully resourced with differentiated tasks and activities shown on power point slides. Power point also includes a practical to allow students to complete required practical 1.
AQA P2 (New GCSE Spec – Unit 4.2 – Electricity)
Lesson: P2.7 – Mains Electricity
Specification points covered =
4.2.3.2 - Mains Electricity
A fully resourced lesson about mains electricity to be used when teaching the new physics specification GCSE of AQA P2 (Paper 1, Topic 2).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA P4 (New GCSE Spec – Unit 4.4 – Atomic Structure )
Lesson: P4.3 – Radioactive decay and nuclear radiation
Specification points covered =
4.4.2.1 - Radioactive decay and nuclear radiation
A fully resourced lesson about radioactive decay to be used when teaching the new physics specification GCSE of AQA P4 (Paper 1, Topic 4).
Fully resourced with differentiated tasks and activities shown on power point slides.
New AQA P3.3 (New Physics GCSE spec 4.3 - exams 2018) - Internal Energy, temperature change and Specific heat capacity.
AQA P3 (New GCSE Spec – Unit 4.3 – Particle model of matter)
Lesson: P3.3 – Internal Energy, temperature change and Specific heat capacity.
Specification points covered =
4.3.2.1 - Internal energy
4.3.2.2 - Temperature changes in a system and specific heat capacity
A fully resourced lesson about Internal Energy, temperature change and Specific heat capacity, to be used when teaching the new physics specification GCSE of AQA P3 (Paper 1, Topic 3).
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
AQA P2 (New GCSE Spec – Unit 4.2 – Electricity)
Lesson: P2.10 – Static Charge (Triple ONLY)
Specification points covered =
4.2.5.1 - Static Charge
A fully resourced lesson about static to be used when teaching the new physics specification GCSE of AQA P2 (Paper 1, Topic 2). This lesson is a PHYSICS ONLY lesson.
Fully resourced with differentiated tasks and activities shown on power point slides. Most questions/tasks set for students have peer or self-assessment slides available with answers showing.
AQA Physics New GCSE Spec (Paper 1 Topic 3 - exams 2018) – Particle model of matter (4.3) TRILOGY ONLY LESSONS
All lessons to cover the trilogy course for topic 3 (paper 1, topic 3) – Particle model of matter , from the new spec (exams 2018). Lessons to cover the whole of the trilogy course for this topic.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. Lessons also have peer and self assessment slides with answers to tasks so students can mark their own or others' work.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
4.3.1.2 - Changes of state (lesson P3.1)
4.3.1.1 - Density of materials and required practical (lesson P3.2)
4.3.2.1 - Internal Energy (lesson P3.3)
4.3.2.2 - Temperature changes in a system and specific heat capacity (lesson P4.3)
4.3.2.3 - Changes of heat and specific latent heat (lesson P3.4)
4.3.3.1 - Particle motion in gases (lesson P3.5)
AQA B3 (New GCSE Spec – Unit 4.3 – Infection and response)
Lesson: B3.3 – Vaccination, antibiotics and painkillers
Specification points covered =
4.3.1.7 Vaccination
4.3.1.8 Antibiotics and painkillers
A fully resourced lesson about vaccinations, antibiotics and painkillers to be used when teaching the new biology specification GCSE of AQA B3 (Paper 1, Topic3 - infection and response).
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
AQA B3 (New GCSE Spec – Unit 4.3 – Infection and response)
Lesson: B3.4 – Discovery and development of drugs
Specification points covered =
4.3.1.9 Discovery and development of drugs
A fully resourced lesson about the discovery and development of drugs to be used when teaching the new biology specification GCSE of AQA B3 (Paper 1, Topic3 - infection and response).
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
Take a look in my shop to see the positive reviews that my lessons have received.
New AQA B5.1 (New Biology GCSE spec 4.5 - exams 2018) – Homeostasis and controlling blood glucose
AQA B5 (New GCSE Spec – Unit 4.5 – Homeostasis and response)
Lesson: B5.1 – Homeostasis and controlling blood glucose
Specification points covered =
4.5.1 - Homeostasis
4.5.3.2 - Control of blood glucose concentration
A fully resourced lesson about homeostasis and controlling blood glucose to be used when teaching the new biology specification GCSE of AQA B5 (Paper 2, Topic 1 - Homeostasis and response).
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
New AQA B4.3 (New Biology GCSE spec 4.4 - exams 2018) – Uses of glucose from photosynthesis
AQA B4 (New GCSE Spec – Unit 4.4 – Bioenergetics)
Lesson: B4.3 – Uses of glucose
Specification points covered =
4.4.1.1 - uses of glucose from photosynthesis
A fully resourced lesson about uses of glucose to be used when teaching the new biology specification GCSE of AQA B4 (Paper 1, Topic 4 - Bioenergetics).
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
