Hero image

Engineers Teaching Shop

Average Rating4.50
(based on 15 reviews)

I am a teacher of engineering with nearly 10 years experience. I endeavour to produce a range of resources that will help students to really engage with engineering as a subject and later, a profession. My resources are always produced to make it as easy as possible for you to change, edit add and remove content, or you can simply use the resources as they are. My main focus is to give you all of the information you will need to teach a subject, with as little fuss as possible.

76Uploads

33k+Views

5k+Downloads

I am a teacher of engineering with nearly 10 years experience. I endeavour to produce a range of resources that will help students to really engage with engineering as a subject and later, a profession. My resources are always produced to make it as easy as possible for you to change, edit add and remove content, or you can simply use the resources as they are. My main focus is to give you all of the information you will need to teach a subject, with as little fuss as possible.
Properties of Materials worksheet
stevegowansstevegowans

Properties of Materials worksheet

(0)
Aimed at year 12 City and Guilds Engineering Students/BTEC students studying Engineering. Research activity that focuses on properties of materials. I taught with a discussion and then a computer research session (using the hand-out) followed by a Q/A session for assessment.
4 Engineering Based Starter Activities
stevegowansstevegowans

4 Engineering Based Starter Activities

(0)
4 individual Starter activities for Engineering/DT courses. Suitable for year 10 up, these starters are a good way of engaging students and assessing prior knowledge. I have used them on both BTEC and City and Guilds engineering courses. Ready to use - just print them and away you go. Areas covered - Machining, (Resistant) Materials, Material properties and manual handling (health and safety)
Measurement Tolerances
stevegowansstevegowans

Measurement Tolerances

(0)
A powerpoint presentation that shows how measurements are tolerance in engineering, technology and design. A few questions are included in the slides but more can be easily made by using the examples as a template. Used at the start of engineering measuring activities or before you introduce students to a practical activities in an engineering or design environment. Feel free to cut, chop and paste any of the slides as you see fit for your own purposes.
Thread Cutting - Tapping holes and cutting external threads.
stevegowansstevegowans

Thread Cutting - Tapping holes and cutting external threads.

(0)
Handout that would be useful for a cover teacher to teach students how to produce threaded holes and bar in a workshop setting. If workshop facilities are not available, students can use the questions at the end of the document to revise for theory based exams. Feel free to chop and change anything you want in order to meet your teaching needs.
Casting and Forging Interactive Quiz
stevegowansstevegowans

Casting and Forging Interactive Quiz

(0)
A Powerpoint quiz on the subject of Casting and Forging. Used with engineering, DT and some science (Chemistry) subjects. Can be easily modified to change the questions. Fairly foundation level questions. Please feel free to change and modify anything you wish in order to meet your needs.
CAD (Solidedge) Introduction
stevegowansstevegowans

CAD (Solidedge) Introduction

(1)
Activities that are designed to ease students into 3D modelling on Solidedge. Starts very basic but increases in difficulty throughout. Requires a teacher with a fair level of Solidedge experience. Feel free to cut, paste and chop anything you want in order to suit your own style.
CAM research session
stevegowansstevegowans

CAM research session

(0)
Questions designed for students to research around the appropriate topics that feature in the City & Guilds Engineering CAM (Level 2) unit. Basic way of getting students to revise - My students quite enjoyed it and because of the way I worded questions, I had very good success rates. Feel free to cut any questions out that you want in order to suit your own teaching style.
Health and Safety introduction.
stevegowansstevegowans

Health and Safety introduction.

(0)
Engineering based health and safety intro for fairly low level students - Level 1/2 Explains the meanings behind COSHH, HASAWA and asks students to find risks in three photographs. Handy for a cover teacher to use to introduce health and safety theory. Feel free to change, cut and paste to suit yourself.
Technical drawing activities
stevegowansstevegowans

Technical drawing activities

(1)
Tech drawing powerpoint that starts by showing the different types of line involved in engineering drafting and moves on to an animation that explains the methods behind drawing circles in isometric projection. Following this are several activities that use the technique, advancing in complexity. You could easily produce a handout from the frames in the slides, allowing for differentiation in ability. Feel free to cut, paste and change anything to suit your own style.
Projection Systems
stevegowansstevegowans

Projection Systems

(0)
Resource that gives a thorough description of basic engineering drawing projections. Lots of information included so use these slides to enhance your own lessons. Ideal for a point of reference for students just starting out with technical drawing. Please feel free to chop and change anything in this resource.
Oil Pumps and Lubrication Systems
stevegowansstevegowans

Oil Pumps and Lubrication Systems

(0)
A revision resource that explains how a wide range of oil pumps and lubrication systems work in engineering. Feel free to chop and change anything that you might need to suit your courses.
Rotary Seals
stevegowansstevegowans

Rotary Seals

(0)
A resource designed to aid revision when studying rotary seals in an engineering course. Please feel free to chop and change anything you might need to suit your style and course.
Turning Handout
stevegowansstevegowans

Turning Handout

(0)
An old turning assessment activity designed to be used with the old NVQ courses. I still use this when introducing students to the lathe as it helps them to think about the functions and risks. Please cut and paste any of the information and drawings in the handout and use them as you feel best reflects your course.
Mechanical Engineering Apprentice Fitter Revision pack
stevegowansstevegowans

Mechanical Engineering Apprentice Fitter Revision pack

(0)
8 Resources designed for the teaching of BTEC and City & Guilds Engineering qualifications. Each document covers some of the specifications for a range of engineering information, this information can then be cut down into activities or used as part of your wider engineering teaching. Please feel free to cut, chop and paste anything in these resources to suit your teaching needs.
Battery Technology
stevegowansstevegowans

Battery Technology

(0)
Presentation teaching information about battery technology, the materials involved and the reactions that take place in order to produce a charge. Suitable as an introduction to the subject, or as a cover teacher presentation - it's very easy to produce some questions or a short test on the subject to go with the slides. Feel free to repurpose anything in the slides to suit your own needs.
Ceramics - Information presentation.
stevegowansstevegowans

Ceramics - Information presentation.

(0)
Presentation with lots of ceramics manufacturing information. Designed to be used with mid level materials students (BTEC Level 3, more or less) Lots of information so I would cut out the slides that you want and make your lessons around that. Feel free to chop and change anything you like.