A fully resourced lesson which guides students through writing decay equations to represent alpha and beta decay. This lesson includes a lesson presentation (41 slides) and differentiated worksheets. Time is taken at the beginning of the lesson to ensure that students know the sub-atomic particles that are found in an alpha particle and a beta particle so that they can understand why the atomic and mass numbers are affected during the decay. Moving forwards, a step-by-step guide is used to show students how to write both types of equations. There are regular progress checks throughout the lesson so that students can check their understanding. This lesson has been written for GCSE students (14 - 16 year olds in the UK)

An engaging lesson presentation (45 slides) that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit P6 (Waves) of the AQA GCSE Combined Science specification (specification point P6.6). The topics that are tested within the lesson include: Longitudinal and transverse waves Properties of waves Types of EM waves Properties and applications of EM waves Students will be engaged through the numerous activities including quiz rounds like “Tell EM the word” and “Take the HOTSEAT” whilst crucially being able to recognise those areas which need further attention

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 2 (Electricity) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Standard circuit diagram symbols Current, resistance and potential difference Resistors Series and parallel circuits Direct and alternating potential difference Mains electricity Power Static charge The students will thoroughly enjoy the range of activities, which include quiz competitions such as “GRAFT over these GRAPHS” where they have to compete to be the 1st to recognise one of the graphs associated with the resistors whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

An informative lesson presentation (37 slides) and associated question worksheet which looks at the key properties of alpha, beta and gamma radiation. Students are given key pieces of information during the lesson and are then challenged to use their knowledge of related topics such as atomic structure and waves to complete the information table about the types of radiation. By the end of the lesson, students will be able to compare the types of radiation on form, charge, relative mass, penetrating power and equation symbols. Progress checks have been written into the lesson at regular intervals so that students can constantly assess their understanding. This lesson has been written for GCSE students (14 - 16 year olds in the UK).

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 6 (Waves) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Transverse and longitudinal waves Properties of waves Reflection of waves Sound waves Waves for detection and exploration Types of electromagnetic waves Properties of electromagnetic waves Visible light The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Should you WAVE goodbye” where they have to determine whether a passage about waves is 100% correct or not whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This fully-resourced REVISION lesson has been written to challenge the students on their knowledge of the content of topic 5 Solids, liquids and gases) of the Pearson Edexcel International GCSE Physics specification. The engaging PowerPoint and accompanying resources will motivate the students whilst they assess their understanding of the content and identify any areas which may require further attention. The wide range of activities have been written to cover as much of the topic as possible but the following specification points have been given particular focus: Using the correct units Converting between the Kelvin and degrees Celsius scales Explain the qualitative relationship between pressure and Kelvin temperature Use the relationship between pressure and Kelvin temperature Know and use the equations for density and pressure Design an experiment to investigate density Know the meaning of the specific heat capacity Use the equation for change in thermal energy Quiz rounds such as “SAY WHAT YOU SEE” and “YOU DO THE MATH” are used to test the students on their knowledge of key terms as well as numerical facts

This fully-resourced revision lesson challenges the students on their knowledge of the content which is detailed in topic 14 (Particle model) of the Pearson Edexcel GCSE Physics specification. The wide range of activities, which include exam-style questions with clear explanations, will allow them to assess their understanding of the content and to recognise those areas which require further attention. The lesson has been designed to cover as much of the module as possible but the following specification points have been given particular attention: Recall and use the equation to calculate density Explain the differences in density between the different states of matter Describe that mass is conserved during physical changes Explain how heating a system will change the temperature or change a state Define the terms specific heat capacity and specific latent heat and describe the differences between them Use the equations involving specific heat capacity and specific latent heat Explain the qualitative relationship between Kelvin temperature and pressure of a gas Convert between the Kelvin and degrees Celsius scales Explain the effect of changing the volume on the pressure of a fixed mass of gas at a constant temperature Explain why doing work on a gas can increase the temperature Most of the resources are differentiated to allow students of differing abilities to access the work and be challenged and the PowerPoint guides the students through the range of mathematical skills which are tested in this topic

This revision lesson is fully-resourced and has been written to allow students to assess their understanding of the content detailed in topic 15 (Forces and matter) of the Pearson Edexcel GCSE Physics specification. The engaging and detailed PowerPoint uses a wide range of activities, which includes exam-style questions with clear explanations of the answers, to enable the students to identify those areas which require further attention before the mock or terminal examinations. The lesson was designed to cover as much of the topic as possible but the following points have received particular attention: The difference between elastic and inelastic distortion Recall and use the equation for linear elastic distortion Use the equation to calculate the work done in stretching Describe the relationship between force and extension Recall and use the equation for pressure Describe how pressure in fluids increases with depth and density Use the equation to calculate the magnitude of pressure in liquids Explain that an object in a fluid is subjected to upthrust Calculate the depth at which an object floats Due to the heavy mathematical content of this specification and particularly this topic, a lot of the activities challenge the students on their ability to recall and apply the equations. Step-by-step guides and differentiated resources are used to allow students of differing abilities to access the work.

This is an engaging and informative lesson that looks at the wires inside a UK plug and considers their role in terms of the supply of mains electricity. The safety features of the plug, such as the fuse, are also discussed so that students can understand how a particular fuse is chosen. As the cover image shows, the lesson begins by challenging the students to use their knowledge of all three of the Sciences to come up with the three names of the wires. Some students will know that these are the wires in a UK plug but some wont. Key terminology such as three-core cable is used throughout, as well as a running theme with the colours, so that students become accustomed to identifying a particular wire by its plastic insulation. Through a range of tasks which encourage student discovery and educated predictions, the students will learn the functions of each of the wires as well as their potential difference. The fuse is introduced to the students and links are made to the electrical circuits topic by considering the resistance of the wire inside the fuse and challenging them to use the electrical power equation to calculate a current and choose an appropriate fuse for that plug. The aim of the lesson is to get students to absorb information as the lesson progresses in order to eventually label a black and white diagram of the plug. The last part of the lesson looks at two-core cables and then relates this back to the importance of the earth wire in a UK plug. This lesson has been written for GCSE aged students but is suitable for use with younger students who are learning about this topic.

This is a fully-resourced lesson that looks at the different parts of the National Grid, specifically focusing on the roles of the step-up and step-down transformers. The lesson includes an informative lesson presentation (25 slides) and a calculations worksheet which challenges the students to apply their mathematical skills to work out why the potential difference is increased and decreased by the transformers. Time has been taken to make links to related topics such as electrical circuits as well as the conservation of energy. Students will recognise that a high current would have led to a lot energy being dissipated to a thermal energy store if step-up transformers weren’t involved and also that decreasing the potential difference before it enters the homes as mains electricity is important to reduce the risk of electrocution. A number of quick competitions are used to introduce key terms or to check on understanding such as ORDER, ORDER which is shown on the cover image where students have to recognise when the parts of the National Grid are finally shown in the correct order. This lesson has been designed for GCSE aged students.

This revision lesson has been filled with activities that will challenge the students on their knowledge and understanding of the content detailed in topic 9 of the Pearson Edexcel GCSE Physics specification. The wide range of activities in the engaging PowerPoint and accompanying resources will check on the knowledge of the forces and their effects topic and allow the students to recognise those areas which need further attention before the mock or terminal GCSE exams. This resource has been designed to cover as much of topic 9 as possible but the following points have received particular attention: What happens when objects can interact at a distance without contact What happens when objects can interact by contact Explain the difference between vector and scalar quantities using examples Draw free body diagrams Recall and use the equation to calculate the moment of a force Recall and use the principle of moments in situations where rotational forces are in equilibrium Explain ways of reducing unwanted energy transfer through lubrication The main task of the lesson which challenges students to use the principle of moments has been differentiated so that differing abilities can access the work

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Physics Topic 1 (Key concepts in Physics) of the Edexcel GCSE Combined Science specification. Topic 1 is common to both Paper 5 and 6 and therefore will be tested in both of these exams. The sub-topics and specification points that are tested within the lesson include: Recall and use the SI units for the physical quantities Recall and use multiples and sub-multiples of units, including giga, mega, kilo, centi, milli, micro and nano Be able to convert between different units, including hours to seconds Use significant figures and standard form where appropriate Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

A fully-resourced lesson that explores how resistance, current and potential difference differ between series and parallel circuits. This knowledge needs to be sound in order for students to be able to carry out circuit calculations. The lesson includes a practical and task-based lesson presentation (24 slides) and an accompanying worksheet. The lesson begins by challenging the students to recognise the key difference between the two circuits, in that in a parallel circuits, the electrons can follow more than one route. Moving forwards, each physical factor is investigated in each type of circuits and students carry out tasks or calculations to back up any theory given. Helpful analogies and hints are provided to guide the students through this topic which is sometimes poorly understood. Students will be challenged to use the V = IR equation on a number of occasions so that they are comfortable to find out any of these three factors. Progress checks have been written into the lesson at regular intervals so that students are constantly assessing their understanding and any misconceptions can be addressed. This has been written for GCSE students, but could be potentially used with higher ability KS3 students.

A fully resourced lesson which includes an informative lesson presentation (25 slides) and an associated worksheet that show students how to give answers to a certain number of significant figures. The answers to questions in Science are often required to be given in significant figures and this lesson guides students through this process, including the rules of rounding that must be applied for success to be likely. This lesson has been designed for GCSE students but is suitable for KS3

An engaging, practical-based lesson presentation (34 slides), accompanied by a practical worksheet and differentiated questions worksheet, which together guide students through the different calculation questions which involve the half-life. The lesson begins by introducing the students to the definition of a half-life and then showing them an example with I-131 so they can visualise how the half-life doesn’t change (and that radioactivity is measured in Bq). Moving forwards, the students will follow the given instructions to create the results to plot a decay curve and will be shown how to use this curve to determine the half-life of an isotope. The remainder of the lesson focuses on the different calculation questions that can be found on exam papers and uses a step by step guide to help them to handle the increasing difficulty. Students will be challenged to apply their new found knowledge to a set of 5 questions and this worksheet has been differentiated two ways so that those who need extra assistance, can still access the learning. Progress checks have been written into the lesson at regular intervals so that students can constantly assess their understanding. This lesson has been designed for GCSE students (14 - 16 years old in the UK)

This is a fully-resourced revision lesson that could be used over a series of lessons to help students to revise and assess their knowledge of the content that is found in topics P1 (Energy), P2 (Electricity), P3 (Particle model of matter) and P4 (Atomic structure) of the AQA GCSE Combined Science specification and will be assessed on PAPER 5. This revision lesson uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to cover the following sub-topics and specification points: Energy stores and systems Changes in energy Energy changes in systems Standard circuit diagram symbols Electrical charge and current Current, resistance and potential difference Series and parallel circuits Power Specific heat capacity The structure of an atom Mass number, atomic number and isotopes The development of the model of the atom Radioactive decay and nuclear radiation Nuclear equations Half-lives This lesson contains a big emphasis on the mathematical calculations that will be involved in these exams, and as a result students are challenged to recall the equations and to apply them. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams. A lot of the tasks have been differentiated so that students of all abilities can access the work and be challenged appropriately.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topics P4 and P5 (Waves, Light and the Electromagnetic spectrum) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Define and use the terms frequency, wavelength, amplitude, period and wave velocity as applied to waves Describe the difference between longitudinal and transverse waves by referring to sound and EM waves Recall and use the two equations to calculate wave speed Describe how to measure the velocity of sound in air and ripples on water surfaces Explain how waves will be refracted at a boundary in terms of the change in direction and speed Recall that the EM waves are transverse and travel at the same speed in a vacuum Recall the main groupings of the EM spectrum Recall the potential danger associated with EM waves with increasing frequency Describe some uses of the EM waves Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

An engaging lesson presentation (43 slides) and associated worksheets that uses a combination of exam questions, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within unit P5 (Energy) of the OCR Gateway A GCSE Combined Science specification The topics that are tested within the lesson include: Conservation of energy Efficiency Energy transfer by heating Mechanical energy transfers Students will be engaged through the numerous activities including quiz rounds like “The TRANSFER market” whilst crucially being able to recognise those areas which need further attention

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the sub-topics found within Topic P10 (Electricity and their circuits) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Draw and use electric circuit diagrams Describe the difference between series and parallel circuits Recall that an ammeter is set up in series and a voltmeter is set up in parallel Explain that the electric current is the rate of flow of charge Recall and use the equation connecting potential difference, current and resistance Calculate the current, potential difference and resistance in series and parallel circuits Describe power as the energy transferred per second and is measured in Watts Describe the differences between alternating and direct current Recall that mains electricity uses alternating current and has a frequency of 50Hz Explain the difference between the function of the neutral and live wires Explain the function of the earth wire and fuses in ensuring safety Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced lesson that is written for GCSE students and focuses on the calculations associated with the numerous equations that electrical power is found in. The lesson includes a fast-paced lesson presentation and a series of questions on a worksheet which has been differentiated two ways. Over the course of the lesson, the students will meet the different equations which include the factor of electrical power. Their whole range of mathematical skills will be tested, including rearranging the formula, conversion between units and simplifying two equations into one. The understanding of each of these skills and equations is checked through a range of tasks, each of which has a displayed mark scheme and explanation at the end so that students can self-assess their understanding. Students are encouraged to discuss and come up with insightful questions and answers.