This is a detailed lesson which looks at the topic of reaction times and guides students through calculating a reaction time using the results of the well known ruler-drop test. In addition, students will see how reaction times can be applied in athletics but also in the calculation of the thinking distance for drivers. The lesson includes an engaging lesson presentation (32 slides) and a student task worksheet. The lesson begins by introducing the key term, reaction time, and teaching students that the average reaction time is 0.2 seconds. Moving forwards, a step by step guide is used to show the students how to take the value for distance travelled by a ruler in the drop test and use the equations of motion and change in velocity equation to calculate the reaction time. There is a large mathematical element to the lesson which challenges the students ability to rearrange formula, convert between units and leave answers to a specified number of significant figures. The answers and methods in obtaining these are always displayed at the end of each task so that the students can assess their understanding and recognise where errors were made if any were. Students will have to follow the provided method to obtain 5 results in the ruler drop test and ultimately find out their own reaction time. The remainder of the lesson looks at how the thinking distance at different speeds can be calculated. This lesson has been written for GCSE students due to the high maths content but could be used with younger students of high ability.

This is a fully-resourced lesson that looks at how pressure can be calculated using force and area and then explores how hydraulics are used to transmit a force through a fluid and challenges the students to apply the given equation to calculate the force or area. The lesson includes a lesson presentation (18 slides) and a question worksheet which has been differentiated two ways. The lesson begins by challenging the students to use an answer to a calculation question to work out the equation that links pressure, force and area. A range of mathematical skills are tested throughout the lesson, such as converting between units and rearranging formula, and then the answers are fully explained so any student who was unable to move through the question can visualise the method. Moving forwards, students will be introduced to a hydraulics system and the equation which they will be given on the sheet in the exam. Students will use the equation to calculate the force or area at the second point of the system. This task has been differentiated so that students who find it difficult are still able to access the learning. This lesson has been written for GCSE aged students

This detailed and engaging lesson uses a range of tasks, discussion points and quick competitions to explore how the structure of metals is related to their properties. The lesson begins by providing the melting points for four metals and challenging the students to work out why mercury would be considered to be the odd one out. This task enables students to recognise that most metals are solid at room temperature and then the next part of the lesson guides students through explaining how this is related to the structure. The range of quick competitions are used to maintain engagement but also to introduce new terms such as lattice and delocalised so that students can recognise these in descriptions and use them accurately in their own. Students will recall that metals are good conductors of electricity and heat and now will be able to explain this with reference to the free electrons. Progress checks are written into the lesson at regular intervals so understanding can be checked at critical points and misconceptions addressed. The final part of the lesson makes link to related topics such as alloys and naming compounds. This lesson has been written for GCSE aged students.

This is a fully-resourced lesson that looks at how the atomic number and electron configuration of an atom can be used to place an element in the Periodic Table. This lesson has primarily been designed for GCSE-aged students but can be used with younger students who are studying the Table and know about electron configurations. The lesson begins by looking at the atomic number and ensuring that students recall how this number can be used to identify the number of protons (and electrons) in an atom. Time is taken to link to Dmitri Mendeleev and how he used the atomic number in his original formatting. Moving forwards, students will be challenged to write the electron configurations for a number of atoms from group 2 and then to identify the connection between the number of electrons in the outer shell and the group number. Again, time is taken to make links to other related topics such as the alkali metals, halogens and noble gases and how their chemical properties are similar based on this outer shell number. Students will discover how the period number is linked to the number of occupied shells. The remainder of the lesson uses two understanding checks to challenge the students to bring together their knowledge to place an element in the correct place in a blank Periodic Table when given information about the atomic number or electron configuration.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within Topic C4 (Organic chemistry) of the Edexcel iGCSE Chemistry specification which has its’ first assessment in 2019. The topics that are tested within the lesson include: Crude oil Alkanes Alkenes Alcohols Carboxylic acids Polymers Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual assessment.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the sub-topics found within Topic C9 (Separate chemistry 2) of the Edexcel GCSE Chemistry specification. The sub-topics and specification points that are tested within the lesson include: Describe flame tests to identify cations in solids or solutions Describe tests and identify anions in solids or solutions Recall the formulae of the molecules of alkanes and alkenes Explain why the alkanes and alkenes are described as the saturated and unsaturated hydrocarbons respectively Explain how bromine water is used to distinguish between alkanes and alkenes Describe how the complete combustion of alkanes and alkenes leads to the production of carbon dioxide and water Recall that a polymer is made up of repeating units Recall the formulae of the carboxylic acids and alcohols Know the functional groups of these homologous series Compare the sizes of nanoparticles with atoms and molecules Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the sub-topics found within Topic C6 (Groups in the Periodic table) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Describe the reactions of lithium, sodium and potassium with water Describe the pattern of reactivity in the alkali metals and explain this pattern in terms of electronic configurations Describe the reactions of the halogens to form metal halides Explain the reactivity of the halogens in terms of electronic configurations Explain why the noble gases are chemically inert Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the sub-topics found within Topic P10 (Electricity and their circuits) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Draw and use electric circuit diagrams Describe the difference between series and parallel circuits Recall that an ammeter is set up in series and a voltmeter is set up in parallel Explain that the electric current is the rate of flow of charge Recall and use the equation connecting potential difference, current and resistance Calculate the current, potential difference and resistance in series and parallel circuits Describe power as the energy transferred per second and is measured in Watts Describe the differences between alternating and direct current Recall that mains electricity uses alternating current and has a frequency of 50Hz Explain the difference between the function of the neutral and live wires Explain the function of the earth wire and fuses in ensuring safety Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic P3 (Particle model of matter) of the AQA Trilogy GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Density of materials Changes of state Temperature changes in a system and specific heat capacity Changes of heat and specific latent heat Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Module P6 (Radioactivity) of the OCR Gateway A GCSE Physics specification. The sub-topics and specification points that are tested within the lesson include: The atomic nuclei Recognising and representing isotopes Unstable nuclei and the emission of radiation Writing balanced equations to represent radioactive decay Explain the concept of half-life and carry out calculations to determine the half-life or time taken for decay Recall the different penetrating powers of alpha, beta and gamma Be able to describe the processes of nuclear fission and fusion Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topics P4 and P5 (Waves, Light and the Electromagnetic spectrum) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Define and use the terms frequency, wavelength, amplitude, period and wave velocity as applied to waves Describe the difference between longitudinal and transverse waves by referring to sound and EM waves Recall and use the two equations to calculate wave speed Describe how to measure the velocity of sound in air and ripples on water surfaces Explain how waves will be refracted at a boundary in terms of the change in direction and speed Recall that the EM waves are transverse and travel at the same speed in a vacuum Recall the main groupings of the EM spectrum Recall the potential danger associated with EM waves with increasing frequency Describe some uses of the EM waves Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within topic 5 (Waves in matter) of the OCR Gateway A GCSE Physics specification. The sub-topics and specification points that are tested within the lesson include: Recall and apply the equation to calculate wave speed using frequency and wavelength Describe wave motion in terms of amplitude, frequency, wavelength and period Define wavelength and frequency and be able to describe and apply the relationship between these and the wave velocity Describe differences between transverse and longitudinal waves Describe reflection and transmission of waves at material interface Understand how waves are used in ultrasound and SONAR Be able to describe how a ripple tank can be used to measure the speed of a wave The electromagnetic spectrum Use ray diagrams to show refraction This revision lesson has been designed to include the wide variety of mathematical skills that are tested in the Physics exam papers including rearranging formula, converting to S.I. units and calculating using standard form. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams