A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
A Science teacher by trade, I've also been known to be found teaching Maths and PE! However, strange as it may seem, my real love is designing resources that can be used by other teachers to maximise the experience of the students. I am constantly thinking of new ways to engage a student with a topic and try to implement that in the design of the lessons.
This lesson describes how the surfaces in insects, fish and mammals are adapted for gas exchange. The PowerPoint and accompanying worksheets have been designed to cover the detail of point 4.3 (i) of the Edexcel A-level Biology B specification.
The lesson has been intricately planned to challenge the students on their understanding of the surface area to volume ratio (as covered in topic 4.1) and to make direct links to upcoming lessons on the transport systems in humans. The lesson begins by explaining that single-celled organisms are able to diffuse oxygen and carbon dioxide across their body surface but that as organisms increase in size and their SA/V ratio decreases, they need adaptations at their gas exchange surfaces to be able to obtain the oxygen to meet their metabolic demands. This leads into the next part of the lesson which describes the roles of the following structures in insects and bony fish:
spiracles, tracheae, tracheoles and tracheole fluid
operculum, gill arch, gill filaments and lamellae
The next task challenges the students to use their knowledge of topics 1, 2 and 3 to come up with the letters that form the key term, countercurrent flow. This is a key element of the lesson and tends to be a principle that is poorly understood, so extra time is taken to explain the importance of this mechanism. Students are shown two diagrams, where one contains a countercurrent system and the other has the two fluids flowing in the same direction, and this is designed to support them in recognising that this type of system ensures that the concentration of oxygen is always higher in the oxygenated water than in the blood in the lamellae.
As the alveoli as a structure of gas exchange was introduced at GCSE, this final part of the lesson has been written to challenge the recall of that knowledge and to build on it.
The main focus is the type of epithelium found lining the alveoli and students will discover that a single layer of flattened cells known as simple, squamous epithelium acts to reduce the diffusion distance. Again, students will have met this in a lesson in topic 2 on specialised cells (and tissues) so a number of prior knowledge checks are used alongside current understanding checks.
The following features of the alveolar epithelium are also covered:
Surface area
Moist lining
Production of surfactant
The maintenance of a steep concentration gradient
As a constant ventilation supply is critical for the maintenance of the steep concentration gradient, the final task considers the mechanism of ventilation
This fully-resourced lesson describes the structure and general properties of slow and fast skeletal muscle fibres. The detailed PowerPoint and accompanying resources are the second in a series of 2 lessons that cover the content detailed in point 6.3 of the AQA A-level Biology specification and due to the obvious links, this lesson also challenges the students on their knowledge of respiration, cell structures and biological molecules like glycogen and haemoglobin
The following structure and properties are covered over the course of this lesson:
Reliance on the aerobic or anaerobic pathways to generate ATP
Resistance to fatigue
mitochondrial density
capillary density
myoglobin content (and colour)
fibre diameter
phosphocreatine content
glycogen content
A wide variety of tasks are used to cover this content and include knowledge recall and application of knowledge exam-style questions with fully-displayed mark schemes as well as quick quiz competitions to maintain motivation and engagement.
This lesson has been specifically planned to tie in with the previous lesson in topic 6.3, titled “Contraction of skeletal muscles”, and this lesson has been uploaded for free
This fully-resourced lesson describes how the functional differences of the retinal rod and cone cells is related to their structures. The detailed PowerPoint and accompanying resources are part of the 2nd in a series of 2 lessons that have been designed to cover the details included in point 6.1.2 of the AQA A-level Biology specification. However, as explained at the start of the lesson, it has been specifically planned to be taught after the lessons in topic 6.3, so that students are aware and understand the meaning of terms such as depolarisation and hyperpolarisation.
It is likely that students will be aware that the human retina contains rod and cone cells, so this lesson builds on that knowledge and adds the detail needed at this level. Over the course of the lesson, students will learn that these cells contain different optical pigments and that this feature along with their differing connectivity to the bipolar neurones means that they have different sensitivities to light, colour perception and visual acuity. Exam-style questions are interspersed throughout to check on current understanding and also make links to previously covered topics. For example, students are challenged to recognise a description of the mitochondria so they can discover that this cell structure is found in the inner segment where it is responsible for generating the ATP needed to pump sodium ions out of the cells.
As detailed above, this lesson ties in closely with topic 6.3 and students will be expected to make links to synapses and to the changes in membrane potential that occur when sodium ions move in or out of a cell
This lesson describes how the recent use of similarities in biological molecules and other genetic evidence has led to new classification systems. The PowerPoint and accompanying resources have been designed to cover point 4.2.2 [c] (i) of the OCR A-level Biology A specification and focuses on the introduction of the three-domain system following Carl Woese’s detailed study of the ribosomal RNA gene.
The lesson begins with an introduction of Woese and goes on to describe how he is most famous for his definition of the Archaea as a new domain of life. Students were introduced to domains and the other classification taxa in a previous lesson, so their recall of this knowledge is continually tested and built upon as details are added. Students will discover the key differences between Archaea and Bacteria that led to the splitting of the prokaryotae kingdom and the addition of this higher classification rank. Moving forwards, the rest of the lesson considers other molecules that can be compared between species for classification purposes and the primary structure of cytochrome is described and discussed. At this point in the lesson, the students are also tested on their knowledge of the nature of the genetic code and have to explain how mutations to DNA can also be used for comparative purposes.
This lesson describes why a disease would be deemed to be an autoimmune disease and describes the mechanisms involved in a few examples. The PowerPoint and accompanying worksheets have been primarily designed to cover point 4.1.1 (k) of the OCR A-level Biology A specification, but this lesson can also be used to revise the content of modules 2 and 3 and the previous lessons in 4.1.1 through the range of activities included
The lesson begins with a challenge, where the students have to recognise diseases from descriptions and use the first letters of their names to form the term, autoimmune. In doing so, the students will immediately learn that rheumatoid arthritis, ulcerative colitis, type I diabetes mellitus, multiple sclerosis and myasthenia gravis are all examples of autoimmune diseases. The next part of the lesson focuses on the mechanism of these diseases where the immune system cells do not recognise the antigens (self-antigens) on the outside of the healthy cells, and therefore treats them as foreign antigens, resulting in the production of autoantibodies against proteins on these healthy cells and tissues. Key details of the autoimmune diseases stated above and lupus are described and links to previously covered topics as well as to future topics such as the nervous system are made. The students will be challenged by numerous exam-style questions, all of which have mark schemes embedded into the PowerPoint to allow for immediate assessment of progress.
This fully-resourced lesson describes the differences between continuous and discontinuous variation and intraspecific and interspecific variation. The engaging PowerPoint and accompanying resources have been designed to cover the first part of point 4.2.2 (f) of the OCR A-level Biology A specification but also acts as a revision tool as a number of activities challenge the students on their knowledge of the genetic code and meiosis from modules 2.1.3 and 2.1.6.
The students begin the lesson by having to identify phenotype and species from their respective definitions so that a discussion can be encouraged where they will recognise that phenotypic variation between members of the same species is due to both genetic and environmental factors and that this is known as intraspecific variation. The next part of the the lesson focuses on these genetic factors, and describes how mutation and the events of meiosis contribute to this variation. A range of activities, which include exam-style questions and quick quiz rounds, are used to challenge the students on their knowledge and understanding of substitution mutations and deletions, the degenerate and non-overlapping genetic code, crossing over and independent assortment. Another quick quiz round is used to introduce polygenic inheritance and the link is made between this inheritance of genes at a number of loci as an example of continuous variation. In the following task, the students have to determine whether a statement or example represents discontinuous or continuous variation. The final part of the lesson describes a few examples where environmental factors affect phenotype, such as chlorosis in plants.
A detailed lesson presentation which guides students through calculating the current, potential difference and resistance in series and parallel circuits. The lesson begins by challenging the students to recognise whether three displayed facts relate to series or parallel circuits. Students are then given a chance to remind themselves of the differences between the circuits in terms of these three physical factors. The rest of the lesson uses a step-by-step guide format to show the students how to work through a circuit calculation by combining their knowledge of the circuit with application of the V = IR equation. Progress checks have been written throughout the lesson so that students can constantly assess their understanding.
This lesson has been designed for GCSE students
A resourced lesson which looks at gas exchange at the alveoli and focuses on how these structures are adapted to carry out efficient gas exchange. The lesson includes an engaging lesson presentation (21 slides) and an associated worksheet.
The lesson begins by revisiting the idea of the surface area to volume ratio of small organisms against larger organisms. This will remind students that due to the low surface area to volume ratio of a human, they need to have adaptations at the exchange surfaces to increase the surface area. Moving forwards, a range of competitions are used to introduce students to the numbers and key terms associated with the alveoli. Students will learn how the large number (700 million) of alveoli leads to a large surface area and how a permeable membrane is also essential. Time is written into the lesson to allow students to think about key features, such as the one cell thick lining, and relate this to the rate of diffusion. The lesson concludes with students completing a passage about how the respiratory and circulatory systems work together to maintain a steep concentration gradient between the alveoli and the capillaries.
There are regular progress checks throughout the lesson to allow the students to check on their understanding. As always, the lesson finishes with a slide containing advanced terminology so that students who have aspirations to take A-level Biology can extend and deepen their knowledge
A fully-resourced lesson which includes a concise lesson presentation (16 slides) and accompanying worksheet that guides students through the use of the gravitational potential energy equation to calculate energy, mass and height. The lesson begins by challenging students to work out the factors involved in calculating gravitational potential energy having been given a scenario with some balls on shelves. The students will discover that mass and height affect the energy size and that a third factor, gravity constant, is involved. The rest of the lesson focuses on using the equation to calculate energy, mass and height. In terms of the latter, students have to carry out an engaging task to work out the height that three flags have to be hoisted to during a medal ceremony.
This lesson has been written for GCSE students.
This is a fully-resourced revision lesson that could be used over a series of lessons to help students to revise and assess their knowledge of the content that is found in topics P1 (Energy), P2 (Electricity), P3 (Particle model of matter) and P4 (Atomic structure) of the AQA GCSE Combined Science specification and will be assessed on PAPER 5. This revision lesson uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to cover the following sub-topics and specification points:
Energy stores and systems
Changes in energy
Energy changes in systems
Standard circuit diagram symbols
Electrical charge and current
Current, resistance and potential difference
Series and parallel circuits
Power
Specific heat capacity
The structure of an atom
Mass number, atomic number and isotopes
The development of the model of the atom
Radioactive decay and nuclear radiation
Nuclear equations
Half-lives
This lesson contains a big emphasis on the mathematical calculations that will be involved in these exams, and as a result students are challenged to recall the equations and to apply them.
Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams. A lot of the tasks have been differentiated so that students of all abilities can access the work and be challenged appropriately.
This is a fully-resourced REVISION lesson which challenges the students on their knowledge of the content in TOPIC B5 (Genetics) of the Edexcel GCSE Combined Science specification. The lesson uses an engaging PowerPoint (63 slides) and accompanying worksheets to motivate students whilst they assess their understanding of this topic.
A range of exam questions, quick tasks and quiz competitions are used to test the following sub-topics:
Recognising and using genetic terminology in context
Constructing genetic diagrams to calculate offspring percentages for diseases caused by dominant and recessive alleles
The sex chromosomes and sex determination
Meiosis and the formation of haploid daughter cells
The structure of DNA
Extracting DNA from a fruit
Genetic and environmental variation
Mutations and their effect on the phenotype
The mathematical element of the course is also tested throughout the lesson and students are given helpful hints on exam techniques and how to structure answers.
This resource is suitable for use at the end of topic B3 or in the lead up to mocks or the actual GCSE exams.
This clear and detailed lesson describes the process of oxidative phosphorylation, including the roles of the electron carriers, oxygen and the mitochondrial cristae and explains the role of chemiosmosis. The PowerPoint has been designed to cover points 5.2.2 (g) and (h) of the OCR A-level Biology A specification and includes details of the electron transport chain, proton gradients and ATP synthase.
The lesson begins with a discussion about the starting point of the reaction. In the previous stages, the starting molecule was the final product of the last stage but in this stage, it is the reduced coenzymes which release their hydrogen atoms. Moving forwards, the process of oxidative phosphorylation is covered in 7 detailed steps and at each point, key facts are discussed and explored in further detail to enable a deep understanding to be developed. Students will see how the proton gradient across the inner membrane is created and that the flow of protons down the channel associated with ATP synthase results in a conformational change and the addition of phosphate groups to ADP by oxidative phosphorylation. Understanding checks are included throughout the lesson to enable the students to assess their progress and prior knowledge checks allow them to recognise the clear links to other topics and modules.
This lesson has been written to tie in with the other uploaded lessons on glycolysis, the Link reaction and Krebs cycle and anaerobic respiration
A fully-resourced lesson which looks at the structures of arteries, veins and capillaries and ensures that students can relate these features to their respective functions. The lesson includes an engaging lesson presentation (41 slides) and a differentiated worksheet
The lesson begins by getting the students to come up with a really simple rule to remind themselves that arteries carry blood away from the heart. They are then challenged to extend this definition by considering the pressure of the blood found in arteries. Students will learn that most arteries carry oxygenated blood but will consider and recall the artery which is the exception to the rule. Students are shown a diagram of the basic structure of the artery and the reasons for the narrow lumen and thick muscular wall are explained. Moving forwards, students are challenged to use the work on arteries to sketch a diagram of a vein and to explain why they have given this vessel certain features. A quick competition is then used to check their understand of the work so far whilst introducing valves and again they are given a chance to work out which blood vessel would need these structures in their lumen. The remainder of the lesson focuses on the capillary and time is taken to relate the features to an actual example involving the alveoli of the lungs.
There are regular progress checks throughout the lesson to allow the students to check on their understanding. As always, the lesson finishes with a slide containing advanced terminology so that students who have aspirations to take A-level Biology can extend and deepen their knowledge
This engaging lesson guides students through the homeostatic control mechanism which is involved in controlling blood glucose concentrations and focuses on the critical interconversion between glucose and glycogen which is often poorly understood. The lesson begins by introducing glucose and ensuring that students recognise that this is a simple sugar which is critical for respiration. Links are made here and throughout the lesson to relateable topics such as the endocrine system so that students can recognise how exam questions will often encompass more than one topic. Students are challenged to recall knowledge about the pancreas and its release of insulin into the blood to travel to the liver. A quick competition is then used to maintain engagement and to introduce glycogen. Due to the large number of words beginning with g that are involved in this topic, time is taken to describe the role of glycogen so that it is not mistaken for glucose or glucagon. Students will learn how the conversion from glucose to glycogen and also the other way round is critical to how the concentration is controlled. The main student tasks involve them completing a partially finished passage about responding to an increase in blood glucose concentration and then using this as a guide to write their own full versions for when concentrations are low. These are just two of a number of progress checks that are written into the lesson at regular intervals so that students can constantly assess their understanding.
This lesson has been written for GCSE students (14 - 16 year olds in the UK) but could be used for A-level lessons that are recapping on this topic before extra knowledge is added at this higher level
This is a fully-resourced lesson that looks at how the atomic number and electron configuration of an atom can be used to place an element in the Periodic Table. This lesson has primarily been designed for GCSE-aged students but can be used with younger students who are studying the Table and know about electron configurations.
The lesson begins by looking at the atomic number and ensuring that students recall how this number can be used to identify the number of protons (and electrons) in an atom. Time is taken to link to Dmitri Mendeleev and how he used the atomic number in his original formatting. Moving forwards, students will be challenged to write the electron configurations for a number of atoms from group 2 and then to identify the connection between the number of electrons in the outer shell and the group number. Again, time is taken to make links to other related topics such as the alkali metals, halogens and noble gases and how their chemical properties are similar based on this outer shell number. Students will discover how the period number is linked to the number of occupied shells. The remainder of the lesson uses two understanding checks to challenge the students to bring together their knowledge to place an element in the correct place in a blank Periodic Table when given information about the atomic number or electron configuration.
This is an engaging and fully resourced REVISION lesson which uses a range of exam questions, understanding checks, quick differentiated tasks and quiz competitions to enable students to assess their understanding of the content within topic 4 (Atomic structure) of the AQA GCSE Physics (8463) specification.
The specification points that are covered in this revision lesson include:
Students should know that atoms are very small, having a radius of about 1 × 10-10 metres.
Students should know that the basic structure of an atom is a positively charged nucleus composed of both protons and neutrons surrounded by negatively charged electrons
Students should be able to use the atomic number and mass number and understand how these differ in isotopes
Students should know the key stages in the development of the model of the atom and the main pieces of evidence that were found
Students should know that some atomic nuclei are unstable and that the nucleus gives out radiation as it changes to become more stable.
Students should know the penetrating and ionising power and range in air of the alpha particles, beta particles and gamma rays
Students should be able to represent decay with equations and be able to describe the effect on the atomic and mass number
Students should be able to determine the half-life of a radioactive isotope from given information.
Students should be able to describe nuclear fission and fusion
The students will thoroughly enjoy the range of activities, which include quiz competitions such as “It’s as easy as ABG” where they have to compete to be the 1st to work out the word formed from the letters of the different types of radiation whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams
This is a fully-resourced REVISION lesson which challenges the students on their knowledge of the content in TOPIC B2 (Cells and control) of the Edexcel GCSE Combined Science specification. The lesson uses an engaging PowerPoint (70 slides) and accompanying worksheets to motivate students whilst they assess their understanding of this topic.
A range of exam questions, quick tasks and quiz competitions are used to test the following sub-topics:
The structure of the CNS
Reflex reactions and the neurones involved
Synapses
Mitosis and the cell cycle
The use of percentile charts to monitor growth
Cell differentiation and specialisation
Stem cells and their potential for use in medicine
There is a big emphasis on the mathematical elements of the course such as percentage change and standard form and students are given helpful hints on exam techniques and how to structure answers.
This resource is suitable for use at the end of topic B2 or in the lead up to mocks or the actual GCSE exams.
This fully-resourced lesson looks at the external and internal structure of the mammalian heart and explains how the differences in the thickness of the chamber walls is related to function. The engaging and detailed PowerPoint and accompanying resources have been designed to cover points 8.2 (a) and (b) of the CIE International A-level Biology specification
As this topic was covered at GCSE, the lesson has been planned to build on this prior knowledge whilst adding the key details which will enable students to provide A-level standard answers. The primary focus is the identification of the different structures of the heart but it also challenges their ability to recognise the important relationship to function. As detailed in specification point (b), time is taken to ensure that students can explain why the atrial walls are thinner than the ventricle walls and why the right ventricle has a thinner wall than the left ventricle. Opportunities are taken throughout the lesson to link this topic to the others found in topics 8.1 and 8.2 including those which have already been covered like circulatory systems as well as those which are upcoming such as the cardiac cycle. There is also an application question where students have to explain why a hole in the ventricular septum would need to be repaired if it doesn’t naturally close over time.
A fully resourced lesson, which includes an informative lesson presentation (22 slides) and differentiated worksheets that guide students through the topic of balancing symbol equations. The lesson takes the students through the steps involved and begins by getting them to be able to recognise when an equation is balanced or not. The difficulty of the equations to be balanced increases as the lesson progresses and students are given helpful hints to aid their progress.
This lesson is suitable for both KS3 and GCSE students
