This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within Topic C4 (Organic chemistry) of the Edexcel iGCSE Chemistry specification which has its’ first assessment in 2019. The topics that are tested within the lesson include: Crude oil Alkanes Alkenes Alcohols Carboxylic acids Polymers Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual assessment.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick differentiated tasks and quiz competitions to help the students to assess their understanding of the topics found within Topic C2 (Inorganic chemistry) of the Edexcel iGCSE Chemistry specification which has its’ first assessment in 2019. The topics that are tested within the lesson include: Group 1 (alkali metals) Group 7 (halogens) Gases in the atmosphere Reactivity series Extraction and uses of metals Acids, alkalis and titrations Chemical tests Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual assessment. The detail of this lesson means that it could be used over a number of lessons at school so that each topic is covered in sufficient depth.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the sub-topics found within Topic C9 (Separate chemistry 2) of the Edexcel GCSE Chemistry specification. The sub-topics and specification points that are tested within the lesson include: Describe flame tests to identify cations in solids or solutions Describe tests and identify anions in solids or solutions Recall the formulae of the molecules of alkanes and alkenes Explain why the alkanes and alkenes are described as the saturated and unsaturated hydrocarbons respectively Explain how bromine water is used to distinguish between alkanes and alkenes Describe how the complete combustion of alkanes and alkenes leads to the production of carbon dioxide and water Recall that a polymer is made up of repeating units Recall the formulae of the carboxylic acids and alcohols Know the functional groups of these homologous series Compare the sizes of nanoparticles with atoms and molecules Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the sub-topics found within Topic C5 (Separate chemistry 1) of the Edexcel GCSE Chemistry specification. The sub-topics and specification points that are tested within the lesson include: Recall the typical properties of the transition metals Explain why converting pure metals into alloys often increases the strength of the product Calculate the concentration of solutions in mol per decimetre cubed Know the apparatus involved in an acid-alkali titration Carry out simple titration calculations Recall and calculate the atom economy Describe the molar volume, at RTP, and use to calculate the volumes of gases Recall how a hydrogen-oxygen fuel cell is used to produce a voltage and water is the only product Evaluate the strengths and weaknesses of fuel cells Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that could be used over a series of lessons to help students to revise and assess their knowledge of the content that is found in topics P1 (Energy), P2 (Electricity), P3 (Particle model of matter) and P4 (Atomic structure) of the AQA GCSE Combined Science specification and will be assessed on PAPER 5. This revision lesson uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to cover the following sub-topics and specification points: Energy stores and systems Changes in energy Energy changes in systems Standard circuit diagram symbols Electrical charge and current Current, resistance and potential difference Series and parallel circuits Power Specific heat capacity The structure of an atom Mass number, atomic number and isotopes The development of the model of the atom Radioactive decay and nuclear radiation Nuclear equations Half-lives This lesson contains a big emphasis on the mathematical calculations that will be involved in these exams, and as a result students are challenged to recall the equations and to apply them. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams. A lot of the tasks have been differentiated so that students of all abilities can access the work and be challenged appropriately.

This is a fully-resourced revision lesson that could be used over a series of lessons to help students to revise and assess their knowledge of the content in topics P1 (Matter), P2 (Forces) and P3 (Electricity and magnetism) of the OCR Gateway A GCSE Combined Science specifiction which can be assessed in paper 5. This revision lesson uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to cover the following sub-topics and specification points: Describe how and why the atomic model has changed over time Describe the structure of the atom and the charges of the particles Define the term specific latent heat Conversions from non S.I. units to S.I. units Explain the vector-scalar distinction Recall examples in which objects interact Represent forces as vectors by drawing free-body diagrams Know the definition of Newton’s three laws of motion Define momentum and describe examples of momentum in collisions Recall and apply Newton’s third law Describe the relationship between force and the extension of a spring Calculate the spring constant in linear cases Define mass and weight Recall that current depends upon both potential difference and resistance Recall and apply the relationship between I, R and V Show that Fleming’s left hand rule represents the relative orientations of current, magnetic field and force This lesson contains a big emphasis on the mathematical calculations that will be involved in these exams, and as a result students are challenged to recall the equations and to apply them. Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams. A lot of the tasks have been differentiated so that students of all abilities can access the work and be challenged appropriately.

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Module P6 (Radioactivity) of the OCR Gateway A GCSE Physics specification. The sub-topics and specification points that are tested within the lesson include: The atomic nuclei Recognising and representing isotopes Unstable nuclei and the emission of radiation Writing balanced equations to represent radioactive decay Explain the concept of half-life and carry out calculations to determine the half-life or time taken for decay Recall the different penetrating powers of alpha, beta and gamma Be able to describe the processes of nuclear fission and fusion Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic P3 (Particle model of matter) of the AQA Trilogy GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Density of materials Changes of state Temperature changes in a system and specific heat capacity Changes of heat and specific latent heat Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic P14 (Particle model) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Explain the different states of matter in terms of movement and arrangement of particles Recall and use the equation to calculate density Explain the differences in density between the different states of matter Describe how mass is conserved during changes of state and understand how these physical changes differ from chemical changes Define the terms specific heat capacity and specific latent hear and explain the differences between them Use the equations to calculate change in thermal energy and thermal energy for a change in state Knows way to reduce unwanted energy transfer Describe the term absolute zero, in terms of the lack of movement of particles Convert between the kelvin and Celsius scales Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topics P4 and P5 (Waves, Light and the Electromagnetic spectrum) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Define and use the terms frequency, wavelength, amplitude, period and wave velocity as applied to waves Describe the difference between longitudinal and transverse waves by referring to sound and EM waves Recall and use the two equations to calculate wave speed Describe how to measure the velocity of sound in air and ripples on water surfaces Explain how waves will be refracted at a boundary in terms of the change in direction and speed Recall that the EM waves are transverse and travel at the same speed in a vacuum Recall the main groupings of the EM spectrum Recall the potential danger associated with EM waves with increasing frequency Describe some uses of the EM waves Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Topic P3 (Conservation of energy) of the Edexcel GCSE Combined Science specification. The sub-topics and specification points that are tested within the lesson include: Recall and use the equation to calculate the change in gravitational potential energy Recall and use the equation to calculate the change in kinetic energy of a moving object Explain what is meant by the conservation of energy Analyse the way energy is stored when a system changes Explain how mechanical processes become wasteful Explain ways of reducing unwanted energy transfer Recall and use the equation to calculate efficiency Describe the main energy sources available for use on Earth Explain patterns and trends in the use of energy resources Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual GCSE terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Module 2.1.1 (Cell structure) of the OCR A-level Biology A specification. The sub-topics and specification points that are tested within the lesson include: The use of microscopy to observe and investigate different types of cells The use and manipulation of the magnification formula The difference between magnification and resolution The ultrastructure of eukaryotic cells and the function of the different cellular components Interpretation of electron microscope images The interrelationship between the organelles involved in the production and secretion of proteins The similarities and differences in the structure and ultrastructure of prokaryotic and eukaryotic cells Students will be engaged through the numerous quiz rounds such as “It doesn’t HURT to CONVERT” and “Word association game” whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual A-level terminal exams

This is a fully-resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content found within Module 5.1.3 (Neuronal communication) of the OCR A-level Biology A specification. The sub-topics and specification points that are tested within the lesson include: The structure and function of sensory, motor and relay neurones The generation and transmission of nerve impulses in mammals The structure and roles of synapses in neurotransmission Students will be engaged through the numerous quiz rounds such as “Communicate the word” and “Only CONNECT” whilst crucially being able to recognise those areas which require their further attention during general revision or during the lead up to the actual A-level terminal exams

This is an engaging revision lesson which uses a range of exam questions, understanding checks, quick differentiated tasks and quiz competitions to allow students to assess their knowledge of the topic of cells and related topics as covered in the GCSE Biology and GCSE Combined Science courses. As cells are the building blocks of living organisms, a strong understanding of this topic is critical for the success of a student on these two courses. The following topics are covered in this revision lesson: The key differences between eukaryotic and prokaryotic cells The structure of a bacterial cell Specialised cells The individual functions of the organelles Calculating size Students will be engaged through the range of activities which includes quiz competitions such as “CELL, CELL, CELL” where students have to compete to identify specialised cells from descriptions. This lesson can be used at any time during the year as a revision material, in the lead up to mocks or as a final revision lesson before the GCSE terminal exams.

This is an engaging and fully-resourced revision lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 8 (Exchange and transport in animals) of the Edexcel GCSE Biology 9-1 specification. The specification points that are covered in this revision lesson include: Explain the need for exchange surfaces and a transport system in multicellular organisms including the calculation of surface area : volume ratio Explain how alveoli are adapted for gas exchange by diffusion between air in the lungs and blood in capillaries Describe the factors affecting the rate of diffusion, including surface area, concentration gradient and diffusion distance Explain how the structure of the blood is related to its function Explain how the structure of the blood vessels is related to their function Explain how the structure of the heart and circulatory system is related to its function, including the role of the major blood vessels, the valves Describe cellular respiration as an exothermic reaction which occurs continuously in living cells to release energy for metabolic processes, including aerobic and anaerobic respiration Compare the process of aerobic respiration with the process of anaerobic respiration Calculate heart rate, stroke volume and cardiac output, using the equation cardiac output = stroke volume × heart rate The students will thoroughly enjoy the range of activities, which include quiz competitions such as Where’s LENNY?” where they compete to recognise the blood vessel being described from the clues whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams.

This is an engaging revision lesson which uses a range of exam questions, understanding checks, differentiated tasks and quiz competitions to enable students to assess their understanding of the content within topic 1 (Key concepts in Chemistry) of the Edexcel GCSE Chemistry specification. Topic 1 is assessed in both papers 1 and 2, and therefore this lesson has been written in the detail that means it is likely to be used over the course of a number of lessons. The specification points that are covered in this revision lesson include: ATOMIC STRUCTURE Explain why atoms contain equal numbers of protons and electrons Recall the meaning of the term mass number of an atom Describe atoms of a given element as having the same number of protons in the nucleus and that this number is unique to that element Describe isotopes as different atoms of the same element containing the same number of protons but different numbers of neutrons in their nuclei Calculate the numbers of protons, neutrons and electrons in atoms given the atomic number and mass number Calculate the relative atomic mass of an element from the relative masses and abundances of its isotopes IONIC BONDING Explain how ionic bonds are formed by the transfer of electrons between atoms Recall that an ion is an atom or group of atoms with a positive or negative charge Calculate the numbers of protons, neutrons and electrons in simple ions given the atomic number and mass number Explain the formation of ions in ionic compounds from their atoms, limited to compounds of elements in groups 1, 2, 6 and 7 Deduce the formulae of ionic compounds (including oxides, hydroxides, halides, nitrates, carbonates and sulfates) given the formulae of the constituent ions COVALENT BONDING Explain how a covalent bond is formed when a pair of electrons is shared between two atoms Explain the formation of simple molecular, covalent substances, using dot and cross diagrams TYPES OF SUBSTANCE Explain the properties of typical covalent, simple molecular compounds Recall that graphite and diamond are different forms of carbon and that they are examples of giant covalent substances Describe the structures of graphite and diamond Explain the properties of metals, including malleability and the ability to conduct electricity CALCULATIONS INVOLVING MASSES Calculate relative formula mass given relative atomic masses Calculate masses of reactants and products from balanced equations, given the mass of one substance The students will thoroughly enjoy the range of activities, which includes a quiz competition called “POLLUTE THE AIR…WITH THE ANSWER” where they have to compete to be the 1st to recognise a pollutant gas from a series of clues whilst crucially being able to recognise the areas of this topic which need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams

This is an engaging REVISION lesson which uses a range of exam questions, understanding checks, quick tasks and quiz competitions to enable students to assess their understanding of the content within topic 6 (Waves) of the AQA GCSE Physics (8463) specification. The specification points that are covered in this revision lesson include: Transverse and longitudinal waves Properties of waves Reflection of waves Sound waves Waves for detection and exploration Types of electromagnetic waves Properties of electromagnetic waves Visible light The students will thoroughly enjoy the range of activities, which include quiz competitions such as “Should you WAVE goodbye” where they have to determine whether a passage about waves is 100% correct or not whilst all the time evaluating and assessing which areas of this topic will need their further attention. This lesson can be used as revision resource at the end of the topic or in the lead up to mocks or the actual GCSE exams