![Hero image](https://www.tes.com/cdn/app-resource-store/5d51d34/img/hero.jpg)
520Uploads
200k+Views
107k+Downloads
Physics
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
How Does the Light from a Torch Change with Distance?
Carry out an experiment to measure how the light from a torch changes with the distance from a lamp
In this activity learners will carry out an experiment to measure how the light from a torch changes with the distance from the lamp. They will record their results in a table and plot a graph.
Activity: How Does the Light from a Torch Change with Distance?
This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science, design and technology, and maths (in this case, mainly science). This resource focuses on the investigation of how the light from a torch (flashlight) changes with distance.
This activity is designed to be carried out in small groups. It is recommended that the teacher carry out the activity in advance of the lesson, to determine whether the distances suggested give sufficient (or excessive) spread of the light image, as this will be determined by the design of the torch used. It is recommended that new batteries are used in the torch, as the light intensity may be affected by the amount of charge remaining in the batteries.
This could be used as a one-off activity in science or linked to maths learning about tables and graphs.
This activity will take approximately 40-60 minutes to complete.
Tools/resources required
Graph paper
Masking tape
Tape measures
Torches/flashlights (with new batteries)
Pencils
(for extension) laser pointer
(for extension) cut-out templates of simple shapes (e.g. square, triangle, circle), mounted on craft sticks
The engineering context
Engineers need to understand how light behaves when designing products for many practical applications. For example, when designing buildings, they may consider the provision of windows and artificial lighting; and when designing cars, they may consider the power and position of both internal and external lights and the placement of mirrors.
Suggested learning outcomes
By the end of this activity students will be able to carry out a scientific experiment and they will understand that the distribution of light from a torch changes with distance.
Download the activity sheets for free!
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Make a Robinson Anemometer
Making a device to measure wind speed
In this science project, students will construct a Robinson Anemometer using common household materials. Once built, students can use it to measure wind speed either inside with domestic items or outside with the natural environment.
This activity can serve as a stand-alone project or as a component of a broader unit on weather or measurement. It is intended for upper Key Stage 2 learners (years 5 and 6).
This resource is part of a collection of free STEM resources created to aid in the teaching of the primary national curriculum, especially in the areas of science and design and technology. The purpose of this activity is to aid in teaching key concepts through the construction of a homemade anemometer.
Parts and components required:
Polystyrene balls, 25 - 40 mm diameter, 1 per anemometer
Wood/bamboo skewers, 3 per anemometer
Putty (such as Blutack or Whitetak) OR modelling clay (such as clay, Plasticine or Playdough).
EITHER 6 paper cups OR 4 paper cups and a plastic water bottle with a sports cap
Sticky tape
Tools and equipment required:
Fans, hair-dryers or other sources of moving air
Stop watches
Commercial anemometer (for extension activity)
The Robinson Anemometer
The Robinson Anemometer is a type of cup anemometer, an instrument used for measuring wind speed. It was invented by John Thomas Romney Robinson in 1846 and is named after him. The Robinson Anemometer consists of four hemispherical cups mounted at the end of horizontal arms, which are attached to a vertical shaft. As the cups rotate due to the force of the wind, the speed of the wind can be calculated based on the rate of rotation. The Robinson Anemometer is still widely used today and is considered one of the most accurate and reliable types of anemometers.
The engineering context
Engineers need to be able to measure the forces that will act on the things they need to design. They need to understand how these measurements are made so that they can be confident that their designs will meet the requirements in practical situations.
Suggested learning outcomes
By the end of this activity students will have an understanding of what is meant by wind, they will be able to construct a simple mechanical device and they will be able to understand that the linear movement of air can be measured by the rotation of an anemometer.
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
How to Make a Magnetic Newton’s Cradle
Making a cradle using magnets that repel each other
Newton’s cradle uses swinging spheres to show how the conservation of momentum and the conservation of energy works. The device was named after Sir Isaac Newton and designed by French scientist Edme Mariotte.
This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on producing a magnetic Newton’s cradle that uses magnets which repel each other instead of the usual metal spheres.
This is a great way for students to learn all about magnets and could be used as a one-off activity or as part of a wider unit of work focusing on magnets and magnetism. It can also be used in conjunction with other IET Education resources, developed alongside the School of Engineering at Cardiff University.
This activity will take approximately 65-90 minutes.
Tools/resources required
Circular magnets with holes in the middle (with N and S poles)
150 mm lengths of dowel
75 mm lengths dowel
100 – 120 mm long pieces of string (6 per unit being built)
Masking tape
Example of a ‘regular’ Newton’s cradle.
Scissors
Hot glue guns, if appropriate
Magnetic forces
Magnets are made from materials such as iron and nickel and they have a north pole and a south pole.
When the north pole of a magnet is placed near the south pole of another magnet, they will attract each other. When two poles that are the same are placed near each other, they will repel each other. For example, north to north and south to south.
The engineering context
Engineers need to know the properties of magnets, which materials are magnetic and which materials are non-magnetic. This knowledge could be used when identifying and creating potential solutions to future engineering problems. For example, when developing green transport solutions.
Suggested learning outcomes
By the end of this activity students will be able to describe magnets as having two poles – north and south, they will understand that magnets either attract or repel each other and they will be able to make and test a ‘magnetic’ Newton’s cradle.
Download the free How to make a magnetic Newton’s cradle activity sheet!
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Magnetic forces STEM activity
Creating designs for novel products using magnets
In this fun STEM activity students will learn about how magnets can be used to attract or repel each other. They will use their knowledge of how they work to identify and sketch design ideas for two novel products that make use of magnets and magnetism.
This resource is a great way for KS2 students to learn all about magnets and could be used as a one-off activity or as part of a wider unit of work focusing on magnets and magnetism. It can also be used in conjunction with other IET Education resources, developed alongside the School of Engineering at Cardiff University.
This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on identifying and sketching design ideas for innovative products that make use of magnets.
This activity could be completed as individuals or in small groups.
This activity will take approximately 40-60 minutes to complete.
Tools/resources required
Bar magnets with N and S poles marked
Modelling materials (for extension activity)
Pencils, pens and sketching equipment
CAD software (for extension activity)
Modelling tools and equipment (for extension activity)
Magnetic forces
Magnets are made from materials such as iron and nickel and they have a north pole and a south pole.
When the north pole of a magnet is placed near the south pole of another magnet, they will attract each other. When two poles that are the same are placed near each other, they will repel each other. For example, north to north and south to south.
The engineering context
Engineers need to know the properties of magnets, which materials are magnetic and which materials are non-magnetic. This knowledge could be used when identifying and creating potential solutions to future engineering problems. For example, when developing green transport solutions.
Suggested learning outcomes
By the end of this activity students will be able to describe magnets as having two poles, they will understand how magnets attract or repel each other and they will be able to identify and design ideas for products that make use of magnets.
Download the free Magnetic forces STEM activity sheet!
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
How do magnets work?
Investigating everyday products to see if they are magnetic
In this activity learners will predict whether they think different products are magnetic based on the material that each product is made from. They will then test their theory by using magnets, to see whether or not each product is attracted to a magnet.
This resource is a great way for KS2 students to learn all about magnets and could be used as a one-off activity or as part of a wider unit of work focusing on magnets and magnetism. It can also be used in conjunction with the IET Education ‘Magnet Madness’ resource, developed alongside the School of Engineering at Cardiff University.
This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on identifying whether everyday products are made from magnetic materials.
This activity could be completed as individuals, in pairs or in small groups. Learners could be given all the products at once to test, or the teacher may wish to lead through one product at a time, recapping the key tasks and questions for them to consider as they go through.
Discussion topics and key questions for learners can be found on the presentation below and detailed instructions on how to complete the activity can be found on the activity sheet.
This activity will take approximately 40-60 minutes to complete.
Tools/resources required
Magnets
Plastic drinks cups
2 pence coins
Steel door keys
Aluminium drinks cans
Steel paper clips
Wooden toy cars
The engineering context
Engineers need to know the properties of magnets, which materials are magnetic and which materials are non-magnetic. This knowledge could be used when identifying and creating potential solutions to future engineering problems.
Suggested learning outcomes
By the end of this exercise students will know which materials are magnetic and which are not, they will be able to give examples of magnetic and non-magnetic materials and they will be able to test products to see whether they are made from magnetic materials.
Download the free How do magnets work? activity sheet!
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Magnetic maze STEM challenge
Making a maze game from a bottle and a magnet
Learners will draw a maze layout on a plastic bottle and use a magnet to guide objects, such as a 1p coin, around the maze. This is a fun STEM challenge that will teach students about how magnets attract certain materials and will show them how to apply this knowledge in an engaging and practical way.
This resource could be used as a one-off activity or as part of a wider unit of work focussing on magnets and magnetism. It can also be used in conjunction with other IET Education resources, developed alongside the School of Engineering at Cardiff University.
Activity: Magnetic maze STEM challenge
This is one of a set of resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on developing understanding of magnetic materials by producing a maze game.
This activity could be completed as individuals or in small groups depending on the equipment that is available.
As an optional extension students could replace the coin with a ball bearing, a paper clip, a plastic coin and a small piece of wood. Which ones work well and which do not?
Students could also draw different maze layouts and use different sized bottles to create a range of puzzle products! Alternatively, students could compete with their friends to see who can complete the maze the fastest by timing themselves with stopwatches.
Tools/resources required
Pre-made exemplar
Magnets
1 pence coins (post 1992)
Plastic drinks bottles
Paper clips (for extension activity)
Ball bearings (for extension activity)
Plastic coins (for extension activity)
Small pieces of wood (for extension activity)
Different coloured marker pens
Stopwatches (for extension activity)
The engineering context
Engineers need to know the properties of magnets, which materials are magnetic and which materials are non-magnetic. This knowledge could be used when identifying and creating potential solutions to future engineering problems.
Suggested learning outcomes
By the end of this exercise students will have an understanding of what makes a material magnetic, they will be able to give examples of magnetic and non-magnetic materials and they will be able to make a maze game using a bottle and a magnet.
Download the activity sheets for free!
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Investigating lamp brightness
Investigate how different battery voltages affect their brightness is key to understanding how series electrical circuits work.
In this fun exercise for KS2, students will construct three separate lamp circuits: one powered by a single AA battery, one powered by two AA batteries and one powered by three AA batteries. Students will learn about current, voltage and how simple series circuits work.
Activity: Investigating lamp brightness
This resource is part of a collection of free STEM resources developed to support the teaching of the primary national curriculum. They are designed to support the delivery of key topics within science and design and technology. This resource focuses on the investigation of how different supply voltages affect the brightness of a lamp.
This activity could be used as a one-off activity or as part of a wider unit of work focusing on electricity and electrical circuits. It can be completed as individuals or in small groups, dependent on the components available.
How long will this activity take?
This activity will take approximately 45-75 minutes to complete.
Parts and components required:
Red and black crocodile clips
1.5 V AA batteries and holders with wires
4.5 V lamps and holders
The engineering context
Engineers need to be able to understand how basic electrical circuits work. This includes current flow and how supply voltage affects the brightness of lamps in simple series circuits. This knowledge could be used when investigating, designing, or making electrical and electronic circuits in the future.
Suggested learning outcomes
By the end of this activity students will have an understanding of what is meant by the terms current and voltage, they will have an understanding of why the brightness of a lamp changes with the number and voltage of the batteries that it is connected to, and they will be able to construct simple series circuits using batteries, lamps and crocodile clips.
Download the free Investigating lamp brightness activity sheet!
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Four experiments with magnets
Super simple fun science experiments
These four fun science experiments using magnets are quick and easy to set up, suitable for learning at home or school. Your students will measure the effects of magnetism as magnets pass through tubes made of different materials; create a visual demonstration of Chaos theory with magnets affecting the swing of a pendulum; feel “attract” and “repel” forces of magnetism by placing magnets on either side of their hand, and use the magnetic field to make an object move as if it is alive.
These four practical experiments demonstrate various different scientific principles related to magnets and magnetism, including:
electromagnetic induction
magnetic fields
chaos theory.
Tools/resources required
Projector/Whiteboard
Magnet kit
2 neodymium magnets
plastic radiator pipe sleeves
copper plumbing pipe
Sticky tape
Blu-tack
Steel nut
Cotton thread
Chairs
This activity could be used as a starter or main activity to introduce the effects of magnetism and magnetic fields, or as one of several activities within a wider scheme of learning focusing on different types of forces. These experiments could also be used as an introduction to power generation or the potential uses of magnets in Design and Technology and Engineering projects.
This activity sheet was developed with the support and participation of the School of Engineering at Cardiff University.
Download the activity sheets for free!
All activity sheets and supporting resources are free to download, and all the documents are fully editable so that you can tailor them to your students and your schools’ needs.
The activity sheet includes teacher notes, guidance, helpful web links, and links (where appropriate) to the national curriculum in the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Human robotic arm design
Exploring the movement of a human arm for robotics design
This is an engaging starter activity in which students examine how human arms move. Learners will also discover how this movement can be replicated with a mechanical arm using a smart material. Students can then subsequently use this information to support the design of a robot arm.
This lesson can be followed by 3D modelling, which looks at designing and modelling a 3D robot arm and build a robot arm, which looks at how to make a robot arm with carboard.
It’s one of a set of resources developed to aid the teaching of the secondary national curriculum, particularly KS3, supporting the teaching in science (specifically biology), engineering and design & technology (D&T).
Activity: Exploring the movement of a human arm for robotics design
By examining the movement of their own arms, students will learn how robot arms might be designed and how smart materials can play a role.
Students will first bend their arms and be asked to monitor and describe the mechanics involved (muscles, joints, etc.). They will then consider how this natural bending motion can inspire the design of robot arms. Learns will be introduced to shape memory alloy (SMA) springs, which can be deformed or stretched and then revert back to their original shape when heated (this can be achieved using an electrical current).
Finally, students will be tasked with explaining how SMAs could be used to create movement in a robot arm.
Download our activity overview for a detailed lesson plan on the movement of a human arm.
The engineering context
Robot arms are an example of a programmable system. They are used in a wide variety of industrial applications, ranging from assembling cars to spray-painting products. They’re also used in more dangerous applications for humans such as bomb disposal and repairing space craft as they orbit the earth.
Suggested learning outcomes
Students will learn that a human arm moves due to the contraction of muscles, and they’ll understand that a robot arm can also use contraction or rotation to achieve movement. Finally, they’ll learn that shape memory alloys can revert to a previous shape when heated.
Download our activity sheet and related teaching resources for free!
The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales.
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
Please do share your highlights with us @IETeducation.
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Reading maps and scale drawings
Work out how to reach destinations using a scale map
In our daily life we take 21st-century technology for granted. Some could argue that we aren’t developing basic skills, as technology often does the work for us. When the technology fails, however, the absence of some necessary skills could create difficult situations.
Can your students use our worksheet and presentation to work out how to reach a destination from a scale map?
This activity is an engaging investigation into the uses of communications technology in the modern world.
There is an opportunity to audit the students’ skills such as visualisation or map-reading to form a scale drawing. These are skills that may not have been developed due to the use of various electronic devices.
As a visualisation activity, distribute the Lost Now presentation as a handout or display it using a data projector. This is an activity where the process of thinking about what the map might show is more important than the actual outcome of the sketch they would produce. The handout has text handouts that can be printed and given to the students. There is also a map using Ordnance Survey symbols that might be better displayed on a screen using a data projector.
Students should complete the three activities outlined in the presentation either in groups or as individuals.
Tools/resources required
Ruler (a transparent ruler showing millimetres is best)
Calculators
Students will need Ordnance Survey symbols from the website below (either print sheets of the symbols or display them on a screen to save on copying).
The engineering context
Living in a highly technological world, where access to information and entertainment is at our fingertips, the Inform and Entertain Me topic is a gateway to engage and introduce students to the principles and technology that form the basis for communication devices that are used in our everyday lives.
Suggested learning outcomes
By the end of this activity students will be able to make informed decisions about technology for social, economic and environmental reasons, they will be able to use scale drawing and they will have an understanding of how waves are used to carry a communications signal.
Download the free Reading maps and scale drawings activity sheet!
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
How does a Sat Nav system work?
Learn about the technology behind satellite navigation systems and discuss the pros and cons of using them
Can your students consider how a GPS system functions and discuss the advantages and disadvantages of using them?
This activity is suitable for KS3 and KS4 and encourages students to undertake research and produce a visual display.
This activity is an engaging investigation into the uses of communication technology in the modern world.
This activity is an individual activity and could be run in an ICT suite to allow students to use the internet for research.
Distribute the Sat Nav handout to students. This handout gives some outline information about satellites and an un-annotated diagram. Students can cut out or copy the un-annotated diagram and add information to this to produce a visual display of how a Sat Nav system works.
There are a series of questions on the Sat Nav handout. Questions 1-4 are designed to get students to undertake research on the topic of satellites and their functionalities and capabilities.
This is a simple activity that will take approximately 30 minutes to complete.
How does a Sat Nav system work?
What we often refer to as ‘Sat Nav’ is properly called the Global Positioning System (GPS). This uses satellites that continually transmit a signal. They are like an accurate orbiting clock. The signal from at least three and up to seven satellites is received and compared by the Sat Nav device. Using some complicated maths, the Sat Nav device can work out not only where it is on the Earth’s surface, but at what altitude it is as well. The position information is compared with a map downloaded and stored by the Sat Nav device. The satellites tell you where you are, and the mapping hardware fills in the pictures of the road around you.
The satellites need to have a clear path through the air to the Sat Nav device – this is normally called a clear line of ‘sight’.
The engineering context
Living in a highly technological world, where access to information and entertainment is at our fingertips, the Inform and Entertain Me topic is a gateway to engage and introduce students to the principles and technology that form the basis for communication devices that are used in our everyday lives.
Download the free How does a Sat Nav system work? activity sheet!
All activity sheets, worksheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Renewable energy debate
Structured class debate on the location of a new wind farm
There is much debate about the issues created by carbon emissions and how renewable energy sources can help resolve these challenges. Most people agree that renewable energy is a good thing, but many oppose to having wind turbines built near their neighbourhood.
In this role-play activity, participants take on different roles to debate a proposed wind farm. In pairs, students discuss whether their character would be in favour of the proposed wind farm and prepare a two-minute talk to share their case with the group.
Afterwards, divide the larger groups into ‘for’ and ‘against’ and bring together all the individual statements to form a strong, coherent case. Four people are chosen to give two reasons to support their argument.
Activity info, teachers’ notes and curriculum links
This activity has been written with a strong science bias. However, it can easily be taught in design and technology with either a systems and control approach or from a ‘sustainability’ angle, looking at the topic of wind farms and the future of energy production. The ‘sustainability’ perspective will provide an activity that could involve design and technology, geography and citizenship.
Download the activity sheets for free!
All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs.
Please do share your classroom learning highlights with us @IETeducation
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales.
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Materials for a robotic arm
Investigate the properties of smart springs and see how they might be used as muscles in a robotic arm
This fun engineering activity encourages students to investigate prosthetic materials and the properties of smart springs and see how they could be used as muscles in a robotic arm.
This is a free resource aimed at secondary school students. This activity encourages students to investigate the properties of smart materials and carry out some data manipulation. Students will also explore the possible moral and ethical issues associated with people potentially choosing to replace healthy body parts with artificial prostheses because they offer higher performance.
This exercise should take around an hour to complete.
Resources required for class:
Several desk fans should be available but kept out of sight of the students until needed.
Resources required per team:
Wooden ‘arm’ as shown in the diagram on the handout below. These will need to be constructed in advance of the lesson. This could be done either by the science technician or by the students themselves as part of a joint project with design and technology.
1 to 1.5 mm diameter copper or other fairly flexible metal wire. Must be stripped of insulation
A smart spring made from a shape memory alloy such as nitinol
Power supply, leads, crocodile clips
Retort stand
Ammeter
Voltmeter
Sets of slot masses of various sizes
The engineering context
The development of new materials with incredible properties is changing the way we live. From LCD TVs to super light airliners, these materials have quickly found their way into the modern technology around us. One area where modern materials have made a huge impact is in the development of prosthetic devices. Some of these devices are beginning to outperform ‘natural’ body parts.
Suggested learning outcomes
By the end of this activity learners will be able to explain why a material is chosen for a use based on its properties, they will be able to describe how smart materials are used in a real life context and they will be able to use and manipulate material-related data.
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Materials for a prosthetic foot
Analyse data to find the best material for a prosthetic foot
The development of new materials is having a huge impact on all of our lives. This engineering activity for kids encourages students to look at a variety of materials and find out which would be the best for ankle and foot prosthetics. Different materials will perform in a variety of different ways, and it is through the analysis of the materials that students will be able to work out which would be the best for a prosthetic foot.
This fun STEM activity is designed as a main lesson exercise for secondary school students. Learners will carry out some data manipulation to find the best material from which to make a prosthetic foot. The activity offers strong opportunities for cross-curricular work with Mathematics.
The class will be split into teams. Students will work as teams of engineering materials consultants and have to find the best material from which to make a prosthetic foot.
Using the related handouts, which can be found below, students will plot graphs of stress against strain for seven different materials and calculate the gradient in order to find the stiffness for each material.
Based on this information, students should select which of the seven materials is the most suitable for the construction of the foot.
Students will present their recommendations to the rest of the class and the other teams will comment on their recommendations.
What you will need:
Graph paper
Pen/pencil
The engineering context
The development of new materials with incredible properties is changing the way we live. From LCD TVs to super light airliners, these materials have quickly found their way into pretty much all of the modern technology around us.
One area where modern materials have made a huge impact is in the development of prosthetic devices. Some of these devices are beginning to outperform ‘natural’ body parts.
The resources within this, and the related activities, encourage students to investigate the properties of smart materials and carry out some data manipulation. Students will also explore the possible moral and ethical issues associated with people potentially choosing to replace healthy body parts with artificial prostheses because they offer higher performance.
By the end of this activity students will be able to make the link between material properties and material usage. They will be able to understand how smart materials are used in a real life context and they will be able to use and manipulate material-related data.
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Which medical imaging technique? - Practical
Investigate aspects of biomedical signal processing
The use of different types of signals is hugely important in all areas of healthcare. Signal processing engineers are involved in everything from extracting information from the body’s own electrical and chemical signals to using wireless signals to allow search-and-rescue robot swarms to communicate with each other.
Activity info, teachers’ notes and curriculum links
In this practical session students investigate aspects of signal processing. Working in teams, students convert an analogue brain signal into a digital format and transmit it across the classroom to another team using flashes from the LED on the Digital Communicator that they will need to build. The other team will record the digital format and rebuild the original waveform from that information.
This activity can be used as a hands-on extension to the ‘Which Imaging Technique?’ activity (see Related activities section below).
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Download the activity sheets for free!
All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
And please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Which medical imaging technique?
Select a method of medical imaging most appropriate for a particular medical condition
The use of different types of signals is hugely important in all areas of healthcare. Signal processing engineers are involved in everything from extracting information from the body’s own electrical and chemical signals to using wireless signals to allow search-and-rescue robot swarms to communicate with each other.
Together with related activities, this resource allows students to investigate the wide range of sophisticated imaging technology available in modern hospitals, and to explore the latest ideas in search-and-rescue robotics.
Activity info, teachers’ notes and curriculum links
This activity gets students to work in small teams to select a method of medical imaging which is appropriate to a particular medical condition. Students are provided with the medical records of eight patients. The different imaging techniques covered in this activity include: CAT, Gamma cameras, MRI, PET, Thermology, Ultrasound and X-rays.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Download the activity sheets for free!
All activity sheets and supporting resources (including film clips!) are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
And please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Balancing forces to design a boat
Balancing forces to design a boat
Using knowledge of forces in an engineering design context
The balancing forces to build a boat activity tasks participants to apply scientific and mathematical understanding of forces (resistance, buoyancy and thrust) and Newton’s 3 laws of motion, in an engineering and design context.
Relate speed to the streamlining in boat design and the shape of a boat’s hull. Consider the balanced and unbalanced forces the boat needs to withstand for maximum efficiency. This activity will demonstrate the principles of hydrodynamics, a similar set of principles to aerodynamics but involving water.
This activity is designed to be taught through science and design and technology simultaneously, as a cross-curricular project. However, it can also be tackled independently from each subject.
All activity sheets and supporting resources are free to download and are fully editable, so you can tailor them to your students’ and your schools’ needs.
Tools/resources required
Projector/whiteboard
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland, and Wales.
Please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
What is Remote Surgery?
Learn about the robots used to perform remote surgery and the important role of electromagnetism
Telemedicine is a new and fast-developing field in healthcare. Even 20 years ago the idea of a surgeon being able to operate a robot from hundreds of miles away in order to perform an operation seemed like science fiction.
Today, this is not only possible but engineers, working with scientists and doctors, are now designing robotic systems which will be able to operate on patients with no human intervention at all.
This activity is a quick, engaging introduction to a lesson using telemedicine and robotics as a context to explore electromagnetism and the link between technology and real-life science.
Download the activity sheets for free!
And please do share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
How do animals use sound
How sounds travel as waves of different frequencies and wavelengths
From founding communications, such as the fire beacon, to being able to communicate with space, there is no denying that developments in communication have advanced at a rapid speed. This topic presents students with communications of the past, present and future, helping them to understand the principles that form the basis for these developments.
This engaging STEM activity is aimed at KS3 students and deals with how animals use sounds and how sounds change in natural phenomena. This is so a student can understand how sound waves travel.
The teacher will first distribute a copy of the ‘Animal Sounds’ handout, which can be downloaded below, to each student.
Make sure students understand sound is a longitudinal wave of compressions and rarefactions of the material. Soundwaves follow the laws of wave behaviour, so they are a useful introduction to wave properties.
This activity can be simplified (particularly for less able students) by creating a discussion on why different animals have different hearing ranges and their experience of phenomena such as the Doppler effect.
Use the handout to discuss different sounds and what they might have learned in other lessons (e.g. music) about pitch, frequency, amplitude etc.
As an extension students could produce a display from low to high frequency, showing where the sound ranges used by different animals lie. Students could consider how sounds outside the normal spectrum could be used to develop new products. For example, to make ‘silent’ devices to broadcast sound or data between two points.
This is a quick and simple activity that will take approximately 15 minutes.
The engineering context
Sounds are vibrations travelling through materials. Many animals make sounds, either for communication or for location. Sound travels at different speeds in different materials. Generally, the denser the material, the faster the sound will travel.
Sound is a longitudinal wave of compressions and rarefactions of the material (a rarefaction involves particles in the material being more spread out than usual). Sound waves follow the laws of wave behaviour, so they are a useful introduction to wave properties.
Suggested learning outcomes
By the end of this free resource students will know that sound is produced by objects vibrating and they will understand that sound is a longitudinal wave. They will also know about the range of frequencies that can be heard by humans and other animals and they will understand that sound travels at different speeds in different mediums.
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
Please share your classroom learning highlights with us @IETeducation
![IETEducation](https://d2w4qhtqw2dbsq.cloudfront.net/profile_live/3108890/small.jpg)
Maths behind a heating system
This is a practical exercise in which students will utilise their mathematical knowledge to solve problems and apply formulas. Specifically, they will compute the length of pipes necessary for an underfloor heating system. They will also write a brief explanation of how a sustainable underfloor heating system operates.
This can be effectively taught within mathematics or within design and technology, as part of resistant materials or product design.
How long will this activity take?
This activity will take approximately 60-90 minutes to complete
Tools/resources required
Green School film
Projector/Whiteboard
Measuring equipment e.g. tape measures or trundle wheels
Squared paper
The engineering context
Sustainability is a key consideration in modern engineering practices. As the world faces pressing environmental challenges such as climate change and resource depletion, engineers must design solutions that not only meet the needs of society, but also minimise their impact on the planet.
Sustainable engineering involves developing systems, products and processes that are socially, economically, and environmentally responsible. This can include reducing carbon emissions, optimising energy use, minimising waste, conserving natural resources, and designing products that can be recycled or repurposed at the end of their lifecycle.
Suggested learning outcomes
By the end of this activity students will be able to describe the operation of a sustainable underfloor heating system and they will be able to create and apply mathematical formulae in a practical context.
Download the free Maths Behind a Heating System activity sheet!
All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs.
The activity sheet includes teacher notes, guidance, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved UK nations; England, Northern Ireland, Scotland and Wales.
Please share your classroom learning highlights with us @IETeducation