A structured Year 12 KS5 lesson including starter activity and AfL work tasks on Catalysts. Suitable for OCR Specification (AS Chemistry) By the end of this lesson KS5 students should be able to: **1. To explain the effect of concentration (including pressure of gases only) on the rate of reaction in terms of the frequency of collisions **2. To calculate the rate of reaction using the gradients of a concentration-time graph **3. To describe the techniques and procedures used to investigate reaction rates including the measurement of mass, gas volumes and concentration Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons including using your own lesson PowerPoints is a fundamental skill of a qualified/unqualified teacher that will be reviewed during these scenarios outlined above

A complete including starter activity, AfL work tasks and main work tasks on oxidation and reduction reactions in terms of electrons. Suitable for GCSE Chemistry and higher tier combined science By the end of this lesson KS4 students should be able to: • write full ionic equations for displacement reactions • Write half equations for displacement reactions • identify in a half equation which species are oxidised or reduced The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete All tasks have worked out answers, which will allow students to self assess their work during the lesson Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A complete lesson including starter activity, mini AfL work tasks with answers, main work tasks with answers for a KS4 GCSE lesson on waste water treatment. By the end of the lesson students should be able to: State the stages of waste water treatment Explain the stages of waste water treatment Compare the ease of treating waste, ground and salt water Students will be able to take rich notes on waste water treatment. The teacher will be able to quickly assess students’ understanding of waste water treatment by carrying our mini AfL questions using A,B,C cards or mini white baords The lesson ends with a main work task for students to complete. Students will be able to self or peer assess their answers to this task using the detailed answers provided Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A structured Year 13 KS5 lesson ( lesson 1 of 2) on Concentration-Time Graphs. This lesson includes starter activity, worked examples and main work task. This lesson is part of the Year 13 topic on Rates which is also discussed in Year 12 By the end of this lesson KS5 students should be able to: To know the techniques and procedures used to investigate reaction rates To calculate reaction rates using gradients from concentration-time graphs Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A complete lesson including starter activity and mini AfL questions on calculating moles and the number of atoms/particles/molecules using the mole equation. Suitable for AQA GCSE Chemistry and Higher tier combined Science The lesson begins with a short starter task (DO NOW) on previous KS4 knowledge about relative atomic mass of elements, calculating the relative molecular mass of compounds and balancing equations By the end of this lesson KS4 students should be able to: Describe the measurement of amounts of substance in moles Calculate the number of moles in a given mass Calculate the mass of a given number of moles The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete All tasks have worked out answers which will allow students to self assess their work during the lesson Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A well structured lesson including starter activity and mini AfL questions on percentage yield and atom economy. Only suitable for AQA GCSE Chemistry (not required for combined science) The lesson begins with a short starter task (DO NOW) recapping titrations and calculating the concentration of solutions Then by the end of this lesson KS4 students should be able to: To calculate percentage yield from balanced symbol equations To calculate atom economy from balanced symbol equations To calculate the masses and moles of products or reactants from balanced symbol equations The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete All tasks have worked out answers, which will allow students to self assess their work during the lesson Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A structured Year 13 KS5 lesson ( lesson 2 of 2) on Concentration-Time Graphs. Lesson includes starter activity, worked examples and Afl quiz By the end of this lesson KS5 students should be able to: To deduce zero & first order reactants from concentration-time graphs To calculate the rate constant of a first order reactant using their half-life Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A structured KS5 lesson including starter activity, AfL work tasks and lesson slides on the properties of alkenes. This lesson is an introduction to the chapter on alkenes. This lesson follows the OCR specification. By the end of the lessons students should be able: 1)To know the general formula of alkenes 2)To explain the shape and bond angle around each carbon atom of a C=C bond 3)To describe how π and σ bonds are formed in alkenes** Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A complete lesson including risk assessment and post practical analysis on AS Chemistry PAG 2.1 :Determination of concentration of hydrochloric acid Students will learn how to: Plan an acid-base titration practical Assess the risks of an acid-base titration practical How to use a range of practical equipment safely and accurately How to record observations How to analyse titration results to determine an unknown concentration Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A complete lesson including starter activity, AfL activities and main work task on amount of substance in equations. Suitable for AQA GCSE Chemistry and higher tier combined science The lesson begins with a short starter task (DO NOW) recapping moles Then by the end of this lesson KS4 students should be able to: calculate the masses of substances in a balanced symbol equation calculate the masses of reactants and products from balanced symbol equations calculate the mass of a given reactant or product. The teacher will be able to check students have met these learning objectives through mini AfL tasks and main work tasks for students to complete All tasks have worked out answers, which will allow students to self assess their work during the lesson Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A whole lesson including starter activity, AfL work tasks and main work task all with answers on Internal Energy By the end of this lesson KS4 students should be able to: Describe the particle model of matter Understand what is meant by the internal energy of a system Describe the effect of heating on the energy stored within a system The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete All tasks have worked out answers, which will allow students to self assess their work during the lesson

A structured KS5 lesson including starter activity and AfL work tasks on the electronic configuration of d-block elements By the end of this lesson KS5 students should be able: To recall the order of electron shells to be filled To construct electronic configurations of d-block atoms and ions To know the elemental anomalies in electron filling of d block atoms Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons including using your own lesson PowerPoints is a fundamental skill of a qualified/unqualified teacher that will be reviewed during these scenarios outlined above

A complete lesson including starter activity and main work tasks with answers for a KS4 GCSE lesson on electrolysis of ionic compounds. Suitable for AQA GCSE Chemistry and higher tier combined science By the end of the lesson students should be able to: Know what electrolysis is and to state its uses Explain how electrolysis works Predict the reactions that occur at each electrode Students will be able to take rich notes on Electrolysis The lesson presentation enables teachers to guide students through the process of electroylsis and how to predict the products formed from a particular ionic compound The lesson ends with a main work task for students to complete. Students will be able to self or peer assess their answers to this task using the detailed answers provided Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A well structured lesson including starter activity, AfL activities and main work task with answers on reactions of metals with acids. Suitable for AQA GCSE Chemistry and higher tier combined science The lesson begins with a short starter task (DO NOW) recapping the definitions of oxidation, reduction and displacement reactions Then by the end of this lesson KS4 students should be able to: Describe how to make salts from metals and acids Construct word equations from metal and acid reactions Write full balanced symbol equations for making salts The teacher will be able to check students have met these learning objectives through mini AfL tasks and main work tasks for students to complete Please download the free resource from my shop called: ‘names and formulae of compounds and ions’ to support students when writing symbol equations for this lesson Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A whole lesson including starter activity, AfL work tasks and main work task all with answers on Specific Heat Capacity. Suitable for AQA GCSE Physics and Combined Science (both higher and foundation) By the end of this lesson KS4 students should be able to: Describe the effect of increasing the temperature of a system in terms of particles State the factors that are affected by an increase in temperature of a substance Calculate specific heat capacity The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete All tasks have worked out answers, which will allow students to self assess their work during the lesson Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

OCR Required Practical on PAG 12.1: Investigating Iron Tablets. This resource includes reasearch and planning guidance, experiment guidance and worked examples of the practical calculations. This resource also includes an amended student practical sheet to help students complete their observations and analysis of results. Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons including using your own lesson PowerPoints is a fundamental skill of a qualified/unqualified teacher that will be reviewed during these scenarios outlined above

A whole lesson including starter activity, AfL work tasks and main work task all with answers on Changes of State By the end of this lesson KS4 students should be able to: Describe how, when substances change state, mass is conserved Describe energy transfer in changes of state Explain changes of state in terms of particles. The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete All tasks have worked out answers, which will allow students to self assess their work during the lesson Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A structured lesson including starter activity, AfL work tasks and main work task with answers on density. Suitable for AQA GCSE Physics and Combined Science (both higher and foundation) By the end of this lesson KS4 students should be able to: To use the particle model to explain the different states of matter and differences in density To calculate density, mass or volume using the density equation The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A complete lesson including starter activity, mini AfL work tasks with answers, main work tasks with answers for a KS4 GCSE lesson on forces, mass and weight. By the end of the lesson students should be able to: Describe what a force is Explain the difference between contact and non-contact forces Explain the difference between mass and weight Students will be able to take rich notes on forces, mass and weight on their prior KS3 knowledge on this topic The teacher will be able to quickly assess students’ understanding of forces, mass and weight by carrying our mini AfL questions The lesson ends with a main work task for students to complete. Students will be able to self or peer assess their answers to this task using the detailed answers provided, followed by a plenary quiz Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above

A complete lesson including starter activity, AfL work tasks and main work tasks on atomic structure. Suitable for AQA GCSE Chemistry and Combined Science (Higher and foundation) By the end of this lesson KS4 students should be able to: Describe the atomic structure of an atom Construct a diagram of the atomic structure of an atom Calculate the number of sub-atomic particles in different elements The teacher will be able to check students have met these learning objectives through mini AfL tasks for students to complete All tasks have worked out answers, which will allow students to self assess their work during the lesson Declaimer: Please refrain from purchasing this popular resource for an interview lesson or a formal observation. This is because planning your own lessons, including using your own lesson PowerPoints, is a fundamental skill of a qualified/unqualified teacher that will be assessed during the scenarios outlined above