AQA Physics New GCSE Spec (Paper 1 Topic 2 - exams 2018) – Electricity (4.2) TRILOGY ONLY LESSONS All lessons to cover the trilogy course for topic 2 (paper 1, topic 2) – Electricity, from the new spec (exams 2018). Lessons to cover the whole of the trilogy course for this topic. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: 4.2.1.1 - Standard circuit symbols (lesson P2.1) 4.2.1.2 - Electric charge and current (lesson P2.1) 4.2.1.3 - Current, resistance and potential difference (lesson P2.2) Required Practical 3 (lesson P2.2) 4.2.1.4 - Resistors (lesson P2.3) Required practical 4 (lesson P2.3) 4.2.2 - Series and parallel circuits (lesson P2.4 and P2.5) 4.2.3.1 - Direct and alternating potential difference (lesson P2.6) 4.2.3.2 - Mains electricity (lesson P2.7) 4.2.4.1 - Power (lesson P2.8) 4.2.4.2 - Energy transfers in everyday appliances (lesson P2.8) 4.2.4.3 - The National Grid (lesson P2.9)

AQA P4 (New GCSE Spec – Unit 4.4 – Atomic Structure) Lesson: P4.4 – Nuclear Equations Specification points covered = 4.4.2.2 - Nuclear Equations A fully resourced lesson about Nuclear Equations to be used when teaching the new physics specification GCSE of AQA P4 (Paper 1, Topic 4). Fully resourced with differentiated tasks and activities shown on power point slides.

New AQA P6.2 (New Physics GCSE spec 4.6 - exams 2018) - Properties of waves (required practical) AQA P6 (New GCSE Spec – Unit 4.6 – Waves) Lesson: P6.2 – Properties of waves (required practical) Specification points covered = 4.6.1.2 - Properties of waves - required practical - make observations to identify the suitability of apparatus to measure the frequency, wavelength and speed of waves in a ripple tank and waves in a solid and take appropriate measurements. A fully resourced lesson about required practical - make observations to identify the suitability of apparatus to measure the frequency, wavelength and speed of waves in a ripple tank and waves in a solid and take appropriate measurements to be used when teaching the new physics specification GCSE of AQA P6 (Paper 2, Topic 2). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA P5 (New GCSE Spec – Unit 4.5 – Forces and their interactions) Lesson: P5.2 – Resultant forces Specification points covered = 4.5.1.4 - Resultant forces A fully resourced lesson covering resultant forces. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P5 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA P5 (New GCSE Spec – Unit 4.5 – Forces and their interactions) Lesson: P5.3 – Work done and energy transfer Specification points covered = 4.5.2 - Work done and energy transfer A fully resourced lesson covering work done and energy transfers. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P5 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA P5 (New GCSE Spec – Unit 4.5 – Forces and their interactions) Lesson: P5.13 – Newton’s laws of motion (including required practical 7); to be spread over 2 one hour lessons. Specification points covered = 4.5.6.2.1 - Newton’s First Law 4.5.6.2.2 - Newton’s Second Law 4.5.6.2.3 - Newton’s Third Law Required practical 7 - Investigate the effect of varying the force on the acceleration of an object of constant mass, and the effect of varying the mass of an object on the acceleration produced by a constant force. A fully resourced lesson covering Newton’s laws, including the required practical work. This was covered over two lessons to allow time to cover the require practical aspect, however could potentially take up to 3. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P5 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA P5 (New GCSE Spec – Unit 4.5 – Forces and their interactions) Lesson: P5.5 – Gravity Specification points covered = 4.5.1.3 - Gravity A fully resourced lesson covering gravity and weight. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P5 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA P1 (New GCSE Spec – Unit 4.1 – Energy) Lesson: P1.3 – Changes in energy (GPE, KE and elastic energy) Specification points covered = 4.1.1.2 - Changes in energy A fully resourced lesson for changes in energy, including tasks to cover GPE, KE and elastic energy. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P1 (Paper 1, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA P1 (New GCSE Spec – Unit 4.1 – Energy) Lesson: P1.5 – Energy changes in a system, Specific heat capacity + required practical 1 (combined and triple) Specification points covered = 4.1.1.3 - Energy transfers in systems Required practical 1: Investigation to determine the specific heat capacity of one or more materials. The investigation links the decrease of one energy store or work done to the increase in temperature and subsequent increase in thermal energy stored. A fully resourced lesson covering energy changes in a system, particularly energy transfers linking specific heat capacity of a material and required practical 1. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P1 (Paper 1, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA P5 (New GCSE Spec – Unit 4.5 – Forces and their interactions) Lesson: P5.7 – Pressure in fluids + upthrust (Physics only) Specification points covered = 4.5.5.1.1 - Pressure in a fluid 1 4.5.5.1.2 - Pressure in a fluid 2 (HT Only) A fully resourced lesson covering Pressure in fluids + upthrust. This is a physics only lesson that covers any higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P5 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

New AQA P7.4 (New Physics GCSE spec 4.7 - exams 2018) - Induced potential, uses of generators (Triple only) AQA P7 (New GCSE Spec – Unit 4.7 – Magnetism and electromagnetism) Lesson: P7.4 – Induced potential, uses of generators (Triple only) Specification points covered = 4.7.3.1 - Induced potential (Higher tier) 4.7.3.2 - Uses of the generator effect (HT only) 4.7.3.3 - Microphones (HT Only) 4.7.2.4 - Loudspeakers A fully resourced lesson about Induced potential, uses of generators, to be used when teaching the new physics specification GCSE of AQA P7 (Paper 2, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing. Retrieval practice from this unit as well as other physics questions are built in as a starter to the lesson.

AQA P5 (New GCSE Spec – Unit 4.5 – Forces and their interactions) Lesson: P5.14 – Changes in momentum (Physics only) Specification points covered = 4.5.7.3 - Changes in momentum (Physics only) A fully resourced lesson covering changes in momentum and the equation used to calculate this, along with the safety features that use changes in momentum to reduce force . This is a physics only lesson that covers any higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P5 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

This is a revision power point to be used when revising the content of AQA Physics paper 1 - it covers the key areas of both the trilogy and physics only routes - these are clearly separated out and so makes it easy to find suitable content activities for your groups. The power point includes: Specification points to discuss All required practical activities - specification points along with example methods and questions for each. Triple only content Recall questions for each topic of physics paper 1 (with answers) for retrieval practice. Content slides covering the key areas of each topic to discuss with your groups. Various differentiated revision activities for each topic (with answers) for students to complete as you progress through. The power point is designed to be used in revision lessons and designed in a way that key areas of weakness for individual groups can be found and addressed easily.

QA Physics New GCSE Spec (Paper 2 Topic 2 - exams 2018) – Waves (4.6) All lessons to cover the both the TRILOGY and TRIPLE lessons of topic 6 (paper 2, topic 2) – Waves (4.6), from the new spec (exams 2018). . The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.6.1.1 - Transverse and longitudinal waves (P6.1 lesson) 4.6.1.2 - Properties of waves (wave calculations) (P6.1 lesson) 4.6.1.2 - Properties of waves - required practical - make observations to identify the suitability of apparatus to measure the frequency, wavelength and speed of waves in a ripple tank and waves in a solid and take appropriate measurements. (P6.2 lesson) 4.6.1.3 - Reflection of waves (physics only) (P6.3 lesson) Required practical 9: Investigate the reflection of light by different types of surface and the refraction of light by different substances. (physics only) (P6.3 lesson) 4.6.1.4 - Sound waves (physics only) (P6.4 lesson) 4.6.1.5 - Waves for detection and exploration (P6.4 lesson) 4.6.2.1 - Types of electromagnetic waves (P6.6 lesson) 4.6.2.2 - Properties of electromagnetic waves 1 (P6.7a lesson) 4.6.2.3 - Properties of electromagnetic waves 2(P6.7a lesson) Required practical (P6.7b lesson) - investigate how the amount of infrared radiation absorbed or radiated by a surface depends on the nature of that surface. 4.6.2.4 - Uses and applications of electromagnetic waves (P6.8 lesson) 4.6.2.5 - Lenses (P6.9 lesson) 4.6.2.6 - Visible Light (physics only) (P6.10 lesson) 4.6.3.1 - Emission and absorption of infrared radiation (P6.11 lesson) 4.6.3.2 - Perfect black bodies and radiation (P6.11 lesson) To buy all of these lessons separately from my shop would cost £30.

A full set of power points that guides learners through every lesson in the Edexcel P3 unit. Plus, learner friendly specifications, broken down into the different topics so that learners can assess their own progress through the unit. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic. Power points are fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners. Many of the power points were used during ofsted observations which were given outstanding judgements.

Lesson power point to cover Edexcel P3.5 - Different lenses. Specification - examined from 2014 Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.

Lesson power point to cover Edexcel P3.3 - Sight Problems Specification - examined from 2014 Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.

Lesson power point to cover Edexcel P3.24 - Kinetic Theory Specification - examined from 2014 Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.

Lesson power point to cover Edexcel P3.27 - Calculating volumes and pressure of gases Specification - examined from 2014 Power point is fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners.

AQA P2 (New GCSE Spec – Unit 4.3 – Particle model of matter) Lesson: P3.1 - Changes of state Specification points covered = 4.3.1.2 - Changes of state A fully resourced lesson about states of matter and changes of state to be used when teaching the new physics specification GCSE of AQA P3 (Paper 1, Topic 3 - particle model of matter). Fully resourced with differentiated tasks and activities shown on power point slides.