TOPIC 7 Rates of reaction PAPER 2- NEW for SEPTEMBER 2017 CC15a Exothermic and endothermic reactions CC15b Energy changes in reactions L8 Energy changes L9 MEXican BEN L10 Bond Energy calculations (H) more detail for each lesson - see individual lesson upload All extension questions available on each slide Answers all underneath each slide Support also available where necessary All powerpoints have: - Summary questions - Independent learning Some powerpoints have: - Practical's - Group activities - AfL -Activate learning -Demonstrate learning All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!!

AQA A2 Level Unit 4 Section 21 Acids, Bases and Buffers Using the specification and books No exam questions are included due to copy right TOTAL OF 13 lessons - including required practical 9 Including: Homework booklets Assessment sheets Interactive powerpoints (rarely seen in A-level) RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE REQUIRE CHEMSHEET access for most TASK questions Unit 4 Section 21: 3.1.12 Acid, bases and buffers Prior knowledge: AS Chemistry 3.1.6 – Chemical equilibria, Le Châtelier’s principle and Kc https://www.tes.com/teaching-resource/aqa-as-level-unit-1-section-6-7-equilibria-redox-chemical-equilibria-le-chatelier-s-principle-oxidation-states-oxidation-reduction-ionic-and-kc-12099917 and Kp https://www.tes.com/teaching-resource/aqa-a2-level-unit-4-physical-chemistry-complete-lessons-kp-and-le-chateliers-12357544 LESSON 1: Bronsted Lowry Acids and Bases LESSON 2: pH of strong acids LESSON 3: pH of strong bases LESSON 4 + 5: Weak acids and bases LESSON 6: pH curves LESSON 7: Indicators LESSON 8: SKetching pH curves LESSON 9 + 10: Titration calculations LESSON 11 + 12: Buffers and calculations LESSON 13: Required practical 9 Homework booklet with answers Leave feedback and enjoy !!

27 lessons in total Including a CORE PRACTICAL - Titration (only SS) Edexcel 9-1 TOPIC 5 Sc14 Quantitative analysis: MOLAR VOLUME of gases and Avogadro’s law of gases CONCENTRATION with mol and grams per dm3 and interchanging between PERCENTAGE YIELDS + moles SEPARATE or TRIPLE 4 + 5. TITRATION CORE PRACTICAL and Titration calculations ATOM ECONOMY Edexcel 9-1 TOPIC 5 Sc15 Dynamic Equilibria + the Haber process 7. TOPIC 5 Sc16a TOPIC 5 Chemical cells and Hydrogen-oxygen fuel cells 8. Edexcel 9-1 TOPIC 5 Sc15 Dynamic Equilibria: Industrial processes including large scale of the Haber process - Edexcel 9-1 Sc15b PART 1 9. Edexcel 9-1 Sc15b PART 2 10.Edexcel 9-1 TOPIC 5 Sc15 Dynamic Equilibria: Haber process + Fertilisers Edexcel 9-1 TOPIC 5 Transition metals, alloys and corrosion/rusting 11. Transition metals 12. Alloys 13. Rusting /Corrosion Edexcel 9-1 TOPIC 9 Testing for ions 14. Tests for metal ions CORE P 15. Testing for non-metal ions CORE P 16. Accurate ion analysis Edexcel 9-1 TOPIC 9 Hydrocarbons 17. Alkane and alkene 18. Reactions of alkanes and alkenes Edexcel 9-1 TOPIC 9 Polymers 19. Addition polymerisation 20. Use of polymers 21. Condensation polymerisation Edexcel 9-1 TOPIC 9 Alcohols and acids 22. Alcohols 23. Alcohols CORE P 24. Carboxylic acids 25. Ethanol production Edexcel 9-1 TOPIC 9 Bulk properties and nanoparticles 26. Choosing materials 27. Nanoparticles

Command word lesson Helps support students in answering questions and hitting the mark scheme The lesson starts about a girl Describe something about the girl Explain something about the girl State something about the girl Then move onto chemistry related questions Really went down well with my combined science kids

AQA A2 Level Electochemical cells (3.1.11) - Electrochemical series complete lesson package Using the specification and books No exam questions are included due to copy right Including: Homework booklets Assessment sheets Interactive powerpoints (rarely seen in A-level) You will need a membership to Chemsheets - doesn’t have to be used with chemsheets RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE Very detailed- will not suit everyone (hidden slides are extras depending on ability of class) 3.1.11 Electrochemical cells 3.1.11.1 Electrode potentials and cells 3.1.11.2 Commercial applications of electrochemical cells LESSON 1: Recap L1- Oxidation and Reduction from AS-Level AS LINK https://www.tes.com/teaching-resource/resource-12099917 Exam Q Objectives: To familiarize yourselves with the key concepts of oxidation states from AS Chemistry To recap redox reactions To recall the terms oxidising agent and reducing agent L1b Exam question consolidation * L2a Electrochemical cells PART 1 The potential of an electrode To know the importance of the conditions when measuring the electrode potential, E (Nernst equation not needed) To understand how cells are used to measure electrode potentials by reference to standard hydrogen electrode L2b Electrochemical cells PART 2 The secondary standard The Daniell cell and representing electrochemical cells To add a sign to the cell voltage on cell diagrams To understand what happens to the emf when changing conditions L3 PRACTICAL Method, questions, results (no tech sheet) L4 PRACTICAL - varying concentration Method, questions and results (no tech sheet) L5 The electrochemical series To know that standard electrode potentials are listed in an electrochemical series To work out overall equations by using the electrochemical series To use the electrochemical series to predict the direction of simple redox reactions To choose a suitable RAD or OAT L5c Exam question consolidation * LINK BELOW L5d Redox Titrations and electrochemical cells To understand why HCl cannot be used in certain redox titrations To understand why some spontaneous reactions do not occur To understand how to determine the species present in solution at the end of the reaction L6 + 7 Applying electrochemistry (working alongside L7b Exam question consolidation) * To understand that electrochemical cells can be used as a commercial source of electrical energy, and that cells can be non-rechargable (irreversible), rechargable or fuel cells To be able to use given electrode data to deduce the reactions occurring in non-rechargeable and rechargeable cells and to deduce the e.m.f. of a cell To explain how some cells can be recharged To explain how a hydrogen fuel cell works Understand the electrode reactions of a hydrogen-oxygen fuel cell and appreciate that a fuel cell does not need to be electrically recharged Evaluate the benefits and risks associated with uses these cells. L8 REQUIRED PRACTICAL 8 *can’t publish ex

4.4.1 Reactivity of metals 4.4.1.1 Metal oxides 4.4.1.2 The reactivity series 4.4.1.3 Extraction of metals and reduction 4.4.1.4 Oxidation and reduction in terms of electrons (HT only) Content split over 11 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1-3 Reactivity series PLUS PRACTICALS L1: To recall the properties of metals To explain the reactivity series of metals and deduce the relative reactivity of some metals by their reactions with water To consolidate learning L2: To carry out a practical to investigate the reaction of metals with dilute acids To create a summary table To consolidate learning L3: To write word equations for the reactions with acid, water and steam To write symbol equations for the reactions with acid, water and steam To consolidate learning with questions Lesson 4+5 Displacement L4:To understand what a displacement reaction is To be able to predict whether a displacement reaction will take place To be able to write the word and symbol equations for displacement reactions L5: To complete a practical to observe some common displacement reactions To write equations for the successful reactions To consolidate learning with questions Lesson 6+7 RedOx PLUS PRACTICALS To understand the terms oxidation and reduction in terms of oxygen To be able to recall the extraction of metals and what this means in terms of oxidation and reduction To explain the position of a metal in the reactivity series relative to its resistance to corrosion Lesson 8 Ores To recall where metals are extracted from To be able to explain the method of extraction relating to its position in the reactivity series To consolidate learning with questions Lesson 9 Ores 2 To discuss the impacts of extracting metals To identify if there is a link between date of discovery and reactivity To consolidate learning with questions Lesson 10 Ores practicals and questions To reduce metals by carbon To consolidate the practical To consolidate learning with questions Lesson 11: Ionic and 1/2 equations (REDOX identified) To recall the key terms required to understand redox reactions To be able to separate aqueous compounds into ions in order to write ionic equations To be able to write balanced ionic equations To identify the species that has been reduced /oxidised

4.6.2 Reversible reactions and dynamic equilibrium 4.6.2.1 Reversible reactions 4.6.2.2 Energy changes and reversible reactions 4.6.2.3 Equilibrium 4.6.2.4 The effect of changing conditions on equilibrium (HT only) 4.6.2.5 The effect of changing concentration (HT only) 4.6.2.6 The effect of temperature changes on equilibrium (HT only) 4.6.2.7 The effect of pressure changes on equilibrium (HT only) Content split over 11 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1 and 2: Dynamic equilbrium To complete a practical exercise To explain what is meant by the term dynamic equilibrium To consolidate learning with questions Lesson 3, 4 and 5 Le Chatelier To recall how the position of a dynamic equilibrium is changed To understand Le Chatelier’s Principle (H) To predict how the position of the equilibrium is affected by changes in temperature, pressure and concentration (H) To understand how the time taken to reach equilibrium is affected by changes in the conditions (H)

4.5.2 Chemical cells and fuel cells (chemistry only) 4.5.2.1 Cells and batteries 4.5.2.2 Fuel cells Content split over 2 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1: Cells and batteries To compare voltages in simple cells To know that a chemical cell produces a voltage until one of the reactants is used up To consolidate learning with questions Lesson2: To be able to recall how a hydrogen-oxygen fuel cell functions To evaluate the strengths and weaknesses of fuel cells for given uses To consolidate learning with questions

4.7 Organic chemistry 4.7.3 Synthetic and naturally occurring polymers (chemistry only) 4.7.3.1 Addition polymerisation 4.7.3.2 Condensation polymerisation (HT only) 4.7.3.3 Amino acids (HT only) 4.7.3.4 DNA (deoxyribonucleic acid) and other naturally occurring polymers Content split over 7 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1: Polymers To know the terms polymer, monomer and polymerisation To understand that simple polymers consist of large molecules containing chains of carbon atoms To consolidate learning Lesson 2: PRAC To synthesise a polymer To complete the BH booklets To consolidate learning with questions Lesson 3: LDPE and HDPE TRIPLE To understand how LDPE and HDPE polymers are produced To describe the uses for LDPE and HDPE To compare the properties of thermosetting and thermosoftening polymers Lesson 4: PRACTICAL To change the conditions of reactions to produce different polymers To understand the problems with polymers (EXTRA) To consolidate learning Lesson 5: POLYMER TRIPLE To recall the terms polymer, monomer and polymerisation To explain additional polymerisation reactions To identify naturally occurring polymers Lesson 6:Condensation polymers To explain what is meant by condensation polymerisation To explain which two functional groups react together to form a polyester To be able to draw the structure of a polyester Lesson 7: Amino acids To be able to label the structure of an amino acid To draw polypeptides To make polysaccharides from sugars

4.7 Organic chemistry 4.7.1 Carbon compounds as fuels and feedstock 4.7.1.1 Crude oil, hydrocarbons and alkanes 4.7.1.2 Fractional distillation and petrochemicals 4.7.1.3 Properties of hydrocarbons 4.7.1.4 Cracking and alkenes 4.7.2 Reactions of alkenes and alcohols (chemistry only) 4.7.2.1 Structure and formulae of alkenes 4.7.2.2 Reactions of alkenes 4.7.2.3 Alcohols 4.7.2.4 Carboxylic acids PART 1: Lesson 1: Crude oil To understand the term ‘hydrocarbon’ To explain why crude oil is useful To explain why crude oil is a finite resource and non-renewable Lesson 2 and 3 L2 Fractional distillation To understand how crude oil is separated into useful fractions To be able to explain the differences between each fraction To consolidate with questions Lesson 4: PRACTICALS Lesson 5: Alkanes To know the term alkane To understand how the formula differs in the alkane series To describe the trends found in an homologous series of compounds Lesson 6: Alkanes and PRACTICAL PART 2: Lesson 1: Alkenes To know the term alkene To recall the formulae of molecules of alkenes and draw the structures of these molecules TRIPLE To consolidate learning with questions Lesson 2 + 3: Cracking and PRACTICAL To explain why cracking is needed To explain what is happening during the cracking of oil fractions To consolidate learning with questions To describe the positive test for alkenes To complete a practical to demonstrate cracking To consolidate learning with questions Lesson 4: Reactions of alkenes To recall the reactions of alkenes with oxygen To be able to write and draw addition reactions of alkenes To consolidate learning with questions PART 3: LEsson 1: Alcohols To recall the functional group specific to alcohols To be able to draw and predict the the structures of several alcohols To consolidate with questions LEsson 2 + 3: Alcohols reactions To understand how ethanol is produced by fermentation To explore other reactions of alcohols To consolidate with questions To study some reactions of ethanol To explore other reactions of alcohols To consolidate with questions Lesson 4: Carboxylic acids To be able to draw and predict the structures of several carboxylic acids To explain the properties of carboxylic acids (HT) To be able to make esters Lesson 5: Reactions of CA To make an ester To consolidate learning To answer exam style questions

4.8 Chemical analysis 4.8.1 Purity, formulations and chromatography 4.8.1.1 Pure substances 4.8.1.2 Formulations 4.8.1.3 Chromatography 4.8.2 Identification of common gases (not really a lesson - part of lesson 2) 4.8.2.1 Test for hydrogen 4.8.2.2 Test for oxygen 4.8.2.3 Test for carbon dioxide 4.8.2.4 Test for chlorine Content split over 4 lessons -but more including practical lessons (lessons in our school are 40 minutes so can condense material for longer lessons if required) All exam questions have been removed for copyright purposes All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Lesson 1: Purity Objectives: To be able to explain the differences between a pure substance and a mixture To be able to explain how impurities affect melting and boiling points To understand how to interpret melting point data Lesson 2: Formulation Objectives: To create a formulation To explain the term formulation Tests for common gases Lesson 3: Chromatography Objectives: To be able to describe how paper chromatography can be used to separate mixtures To be able identify a mixture and a pure substance on a chromatogram To answer questions consolidating learning Lesson 4: Chromatography analysis Objectives: To be able evaluate the chromatography experiment To be able use our math skills and interpret our chromatogram To apply all knowledge to exam questions

COmplete questions, answers, worksheets, homeworks and practical L1 Heat vs Temp, L2 practical , L3 Insulators and conductors, L3b Practical L4 Convection, L5 radiation, L6 Changing state Free booklet found in my shop - it cannot be added here due to licence (AQA KS3 booklets) Good overview for a Year 8 group

AQA A2 Level 3.2.5 Transition metals and 3.2.6 Reactions of ions in aqueous solution COMPLETE LESSON PACKAGE plus practicals and required practicals Using the specification and books No exam questions are included due to copy right Including: Homework booklets Assessment sheets Interactive powerpoints (rarely seen in A-level) You will need a membership to Chemsheets - doesn’t have to be used with chemsheets RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE Very detailed- will not suit everyone (hidden slides are extras depending on ability of class) 3.2.5 Transition metals 3.2.6 Reactions of ions in aqueous solution 3.2.5.1 General properties of the transition metals – LESSON 1 and LESSON 2 crossover (see each ppt for allocation) 3.2.5.3 Shapes of complex ions (done before subsitution reactions – starts in lesson 2) 3.2.5.2 Substitution reactions (covered all in lesson 3a) 3.2.5.4 Formation of coloured ions 3.2.5.5 Variable oxidation states 3.2.5.6 Catalysts 3.2.6 Reactions of ions in aqueous solution Lesson 1: General properties of TM To write the electron structure of first row transition metals and their ions and describe what a transition metal is in terms of electron structure That these characteristics include complex formation of coloured ions, variable oxidation state and catalytic activity Lesson 2: TM complexes and ligands To define the terms ligand, complex, co-ordinate bond and co-ordination number Explain the difference between and give examples of monodentatate, bidentate and multidentate ligands. To identify the oxidation state of the metal and understand the term co-ordination number To know about oxygen transfer by haemoglobin Lesson 3: Shapes of TM complexes To give examples of and sketch the shapes of octahedral, tetrahedral, square planar and linear complexes To understand how to name complexes To know how some complexes can show cis-trans (E–Z)­ or optical isomerism To know the complexes in cisplatin and Tollen’s reagent. Lesson 3c: Ligands subsitution To understand ligand exchange and explain why there may be a change in co-ordination number To describe and explain the chelate effect in terms of entropy and enthalpy To complete a series of exam questions to consolidate To complete a series of practical sessions to consolidate (see prac. requirements ->) Lesson 3d Practical - Ligand displacement series Lesson 4 + 5: Coloured ions To describe factors that affect the colour of TM ions To explain why TM complexes are coloured To describe how colorimetry can be used to find the concentration of coloured ions in solution Lessons 5b: Practical - Determining the formula of a complex ion Lesson 6: Variable os Lesson 6b: Practicals Lesson 7: Redox titrations Lesson 7b Practical Lesson 8: Practical Lesson 9: Catalysts Lesson 9b: Practical Lesson 9bi: Practical Lesson 10, 11, 12: Reactions of ions in aqueous solution Lesson 13: REQUIRED PRACTICAL 11 Homework booklets

KS3 Unit 7L Physics - Sounds and Waves Aimed for High-Middle ability Year 7 but can be adapted for low/middle ability if required (Higher and lower slides) Further to this the lessons can also be split into two for each section - but due to time constraints and a very high ability class I was able to get through it all in 6 lessons rather than 8 lessons Lesson 7Lb: Moving sounds and Lesson 7Le: Comparing waves (it was better suited this taught together) Lesson 1-Particles, Medium and Sounds Lesson 2 - Waves Lesson 3 - Types of Waves Lesson 7Lc: Detecting sounds Lesson 4 - Hearing (the ear) Lesson 5 - Sound and protecting hearing Lesson 7Ld: Using sounds Lesson 6 - Using sounds (echo, sonar, echolocations) 6 lessons including practicals (can be split to 8 if required) Targeted towards specification Videos can be found on you tube but I have attached them just in case they are required All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Uses Plus, minus and Interesting, SOLO learning, Collective memory, AfL techniques, Mini quizzes, homework slides, practice 6 mark questions, videos Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)

Good revision quiz for the following: CC1 States of Matter CC2 Separating methods CC3 Atoms CC4 The Periodic Table CC5 Ionic bonding CC6 Covalent bonding CC7 Types of substance Separated in to 4 Question rounds - Round 1- Atomic Structure + PT (p78-81)* Round 2 and 3 - Bonding + types of substance (p82-88)* Round 4 - Separating methods and mixtures (pg97-104)* * Pages from Edexcel revision guide 9-1 These can be used as a complete class revision lesson or as 10 mark questions for the beginning of lessons. Answers provided also - mainly 1 and 2 mark questions for speed All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS

Brainstorm - A Party (lesson) game Great for revision and end of terms Keep the party going after the big game with Brainstorm.You've played the "one note" party games; now play the one that keeps the party going with loads of categories for loads of fun! All the zany challenges get everyone into the action. Charge up game lessons with the one powepoint that rolls many of your favourite party games all into one game! Played in two teams of any size, it’s designed to keep players with all types of skills and interests having a blast.There is opportunity to add your own slides and keep extending the game (adapting to each class) The game has several sections - depending on the students you have: Act-it (charades) - One person acts out the clue for the rest of the team. Guess-it (word clues) – Get your team to guess as many words as they can. List-it (things in a category) – Teams try to guess the 9 answers in the category. Draw-it (draw the clue) – Get your team to guess your drawing as quickly as they can. Match-it (memory) - Find the pairs as quickly as you can, watch out for the moving tiles. Perform-it (reverse charades) – The team acts out the clue for just one guesser. Order-it (sorting challenge) - Put the listings in order … shortest to longest, oldest to newest. Built-it and and fill-it (tangram torture!) - Uncover the shapes by answering questions to build a picture of the clue; and fill in the gaps on the slides Know-it (trivia challenge) – Guess as many trivia questions as you can before the buzzer. Contains over 580 slides of key words, match ups, questions, games, drawings, fill in and uncover for the following topics: Edexcel 9-1 CC3 Atomic structure Edexcel 9-1 CC4 Periodic table Edexcel 9-1 CC5 Ionic bonding Edexcel 9-1 CC6 Covalent bonding Edexcel 9-1 CC7 Types of substance (Allotropes, metals and polymers) Edexcel 9-1 CC9 Calculating masses Edexcel 9-1 CC1 States of matter Edexcel 9-1 CC2 Separating methods Edexcel 9-1 CC8 Acid and alkali Edexcel 9-1 CC10 Electrolysis Edexcel 9-1 CC11 Metals Edexcel 9-1 CC12 Dynamic equilibrium All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!! Please leave a comment and rate

I made this powerpoint to help students see what Chemistry at A-level is like and why they should study it at A-level Includes: Job prospects Famous celebrities with Science related degrees Practical - Iodine clock (first group to 30 seconds) or Polymer bouncy balls 10 reasons why to study Chemistry Future developments

Edexcel CC9 PART 1-3 Calculations involving masses for the new 9-1 GCSE 8 lessons NO moles TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017 Learning objectives: For all learning objectives see individual lesson uploads (they would not fit on her) All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Main topics include: Please see individual uploads for each lesson All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!! PLEASE LEAVE FEEDBACK and REVIEWS

Edexcel CC7 Types of substance for the new 9-1 GCSE TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017 Learning objectives: To know the terms polymer, monomer and polymerisation To understand that simple polymers consist of large molecules containing chains of carbon atoms To consolidate learning with whiteboards All extension questions available on each slide Answers all underneath each slide Support also available where necessary AfL sections and mini quizzes Reducing the need for photocopying Main topics include: - Review of the bonding models - ionic, metallic, simple covalent, giant covalent - problems with the bonding models All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used) Enjoy !!!!

CC3a Atomic structure CC3b Atomic Number and mass number + part 1 of 2 CC4c Electronic configuration CC3c Isotopes (H) 3 lessons TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017