This Chemistry resource is aimed at KS3 (or lower ability KS4). It last an hour approximately and has 4 group challenges and a whole class challenge at the end. It includes audio instructions from the Periodic Table Master who challenges the students to solve his fiendish clues and try to escape where none have done before. Please use this resource responsibly as it’s a bit scary. If you want a less scary version try: https://www.tes.com/teaching-resource/fun-periodic-table-and-elements-lesson-12194324 It includes: Lesson Plan with ideas for how to increase the atmosphere in the room (it doesn’t need a lab) Clues for students to find elements, their symbols and their position on the Periodic Table in terms of periods and groups. It also uses their knowledge of reactivity of groups 1 and 7 for solving some of the clues. Sound of the voice of the Periodic Table master to increase the realism. An evaluation at the end to judge which parts of the escape room (curriculum) they found easy/hard. Please comment. I hope you find this resource useful. Thank You.

This lesson guides students through how to convert a circuit diagram of a series or parallel circuit into a built one. It starts with circuit symbols, then step by step it shows using photographs how circuits are built from diagrams. This resource contains: 40+ slide powerpoint with quizzes on symbols and plenary quiz on recognising series and parallel circuits along with photographs and instructions on how to build each circuit Worksheets with circuit diagrams and photographs Information sheet for learning the circuit symbols ( I designed this lesson because I and my students wasted a lot of time trying to build more complicated circuits to measure voltage and current-so hopefully time spent here will save time later in other lessons). I will be publishing more resources on electricity, but in the meantime, if you want a free animation on electricity to help click here: https://www.tes.com/teaching-resource/understanding-electricity-voltage-and-current-12450133 If you want a lesson on the main electrical models (with animations), click here: https://www.tes.com/teaching-resource/electrical-models-with-animations-12451806 For more free (and paid) resources, check out my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you for reading this far. Please comment if you have found this resource useful (you do have to buy it first though…)

This resource contains keywords, images and definitions (see below for all 60 keywords covered). It is aimed at KS4, but can be used with upper KS3. The resource can be used as a matching activity, a booklet for revision or display (more uses described below). It can be used in several ways: As a whole class activity: The Power Point version is animated so that it puts the image on first, followed by the keyword, then the definition. In this way, students can be shown the image and asked what the keyword is, then are asked what the definition is. The Interactive Power Point has all the keywords linked to the slide with that definition. It also contains a back to the previous slide button so that you can back to the word you were discussing. The Interactive Keyword Power Point at beginning has all the keywords on the second slide. Click to link to that slide, then click the Home button to go back-Use when referring to certain words that students have difficulty with. As a display around the room. Printed smaller and given to the students as a keyword booklet or Graphic Organiser to revise from. Memory game: Printed smaller and cut out, turned over and the students turn a card over and ask the other students in their group to give the definition when given the word, or vice versa. Cut the titles off and the image, place them all around the room, give the student one piece and ask them to find the other two parts tjhat go with it. The presentation has all the keywords in order of when they are mentioned in the AQA Specification. The Keywords are: Atom, Element, Chemical Symbol, Periodic Table, Compound, Chemical Reaction, Energy Change, Chemically combine, Proportion, Formula, Word Equations, Symbol Equations, Balanced, Ion, Half Equation, Ionic Equation, Separation, Filtration, Crystallisation, Distillation, Fractional Distillation, Chromatography, Purification, Chemical Properties, Model, Electron, Plum Pudding Model, Alpha Particle Scattering Experiment, Nucleus, Nuclear Model, Orbit, Protons, Neutrons, Charge, Relative, Isotopes, Atomic Mass, Nanometres, Percentage Abundance, Energy Levels/Shells, Electronic Structure, Groups, periods, Atomic Weight, Metals, Mendeleev’s Periodic table, Non-metals, Noble gases/Group 0, Trend/Pattern, Alkali Metals/Group 1, Halogens/Group 7, Molecule, Displacement, Aqueous, Salt, Solution, Transition Metals, Density, Hardness and Reactivity. *New Keywords added: Atomic Number, Mixtures, Physical properties, Scattering and Shielding Please comment with any suggestions for improvements or other ideas for resources. I hope you find this resource useful.

Update: Lowered the price if you have to teach this topic at this time This resource of the different electrical models has moving parts to show the students how the model works if they were to see it in real life. It talks about the sweets/matches model, water models (radiator/waterfall), delivery model (coal to Power station) and the ball bearing (chains/rope/dominoes) model and now the Traffic in a City Model. Each model has an animation and asks the students what each part represents and how they can adapt the model to show series/parallel or higher voltage. I have added a worksheet on each model so that students can evaluate each model on how good it is. A master worksheet for adding your own model and a sheet for students to come up with their own model to help their understanding. If you want an animation that shows what happens in a circuit that I made for free (so you can see how bad (or good) my animation skills in powerpoint are, click here: https://www.tes.com/teaching-resource/understanding-electricity-voltage-and-current-12450133 For more resources free (and paid), check out my shop: https://www.tes.com/teaching-resources/shop/stephenkemp193 Please comment if you have found this resource useful. Thank you.

This KS4 AQA Required Practical covers the planning, carrying out and analysing of results with 9-1 graded exam style questions. It lasts at least 1 hour. The ppt carries the students through all aspects of the practical including recognising hazards, variables, safety, fair testing, method and analysing results. It finishes with exam style questions individually graded to assess students. Resource includes: 25 slide ppt to guide the students through the practical (with answers and examples) Student method/practical sheet that students can fill it in as it matches the ppt Two page guide sheet (Included free here, £1.50 from my shop. To see this sheet click here: https://www.tes.com/teaching-resource/required-practical-graphic-organiser-12181508) Apparatus list for technician Safety guide for teacher and technician Links to student safety sheets Learning Objectives on each slide linked to AQA specification A sheet that explains how the questions were graded If you would like to see a free sample similar to this before you buy, the Osmosis one is free here: https://www.tes.com/teaching-resource/updated-osmosis-required-practical-planning-with-graded-with-9-1-exam-style-questions-and-answers-12181019 If you just want the questions and answers, they are available as a bundle here: https://www.tes.com/teaching-resource/all-chemistry-required-practical-revision-questions-12197299 If you want all the Chemistry required Practicals, they are available as a bundle here: https://www.tes.com/teaching-resource/all-chemistry-required-practical-lessons-aqa-12446174 Please comment if you have found this useful. If you would like more required practical resources (or any other science resources) free and paid, please check out my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you.

This KS4 AQA Required Practical covers the planning, carrying out and analysing of results with 9-1 graded exam style questions. It lasts approx 2 hours. The ppt carries the students through all aspects of the practical including hypothesis, variables, safety, fair testing, method, analysing results and evaluating the validity. It finishes with exam style questions individually graded to assess students. Resource includes: 30+ slide ppt to guide the students through the practical (with answers and examples) Two page student method/practical sheet that follows the slides Two page guide sheet (Required Practical Graphic Organiser worth £1.50 from my shop) based on IV Characteristics Apparatus list for technician Learning Objectives on each slide linked to AQA specification If you would like to see a FREE sample similar to this before you buy, the I-V Characteristics one is free here: https://www.tes.com/teaching-resource/-updated-i-v-characteristics-required-practical-planning-with-9-1-graded-questions-and-answers-12199364 If you want the FREE version of the questions only (my most downloaded resource) they are here: https://www.tes.com/teaching-resource/physics-required-practical-worksheet-revision-11791358 If you want a bundle of ALL the Physics Practicals, click here: https://www.tes.com/teaching-resource/all-physics-planning-practicals-with-graded-questions-and-answers-12227081 If you ONLY want the questions and answers, they are available as a bundle here: https://www.tes.com/teaching-resource/physics-required-practical-worksheets-with-9-1-graded-exam-style-questions-with-answers-12199346 Please comment if you have found this useful If you would like more required practical resources (or other science resources) free and paid, please check out my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you.

This KS4 AQA Required Practical covers the planning, carrying out and analysing of results with 9-1 graded exam style questions. It lasts at least 1 hour. The ppt carries the students through all aspects of the practical including recognising hazards, safety, method and analysing results. It finishes with exam style questions individually graded to assess students. Resource includes: 15 slide ppt to guide the students through the practical (with answers and examples) Student method/practical sheet that students can fill it in as it matches the ppt Two page guide sheet (Included free here, £1.50 from my shop. To see this sheet click here: https://www.tes.com/teaching-resource/required-practical-graphic-organiser-12181508) Apparatus list for technician Safety guide for teacher and technician Links to student safety sheets Learning Objectives on each slide linked to AQA specification A sheet that explains how the questions were graded If you would like to see a free sample similar to this before you buy, the Osmosis one is free here: https://www.tes.com/teaching-resource/updated-osmosis-required-practical-planning-with-graded-with-9-1-exam-style-questions-and-answers-12181019 If you just want the questions and answers, they are available as a bundle here: https://www.tes.com/teaching-resource/all-chemistry-required-practical-revision-questions-12197299 If you want all the Chemistry required Practicals, they are available as a bundle here: https://www.tes.com/teaching-resource/all-chemistry-required-practical-lessons-aqa-12446174 Please comment if you have found this useful. If you would like more required practical resources (or any other science resources) free and paid, please check out my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you.

This resource contains a 40+ page PowerPoint with animations on each stage of a Time of Flight (TOF) Mass Spectrometer, including vapourisation, ionisation, ion drift, electric field and ion detection. It explains how to interpret a Mass Spectrum of isotopes and moleules. Including: How to predict the mass spectrum of diatomic molecules with 1:1, 1:2 and 1:3 ratios, with explanations examples and questions. There are questions to check understanding and a sheet of calculations for students to try with explanations of how the answers are calculated. It contains 4 exam style questions based on AQA A Level questions with answers on the PowerPoint. Slides have a Learning Objectives linked to the AQA Syllabus so that everything is covered. For a free sheet of how a TOF Mass Spectrometer works, click here: https://www.tes.com/teaching-resource/mass-spectrometer-time-of-flight-12386261 Please check out my other A level Chemistry resource on how to write electronic configurations here: https://www.tes.com/teaching-resource/electronic-configuration-in-orbitals-s-p-d-12405614 For other resources (mainly GCSE) free and paid, click here: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you.

This resource explains how to write the electronic configuration of the first 36 elements in terms of their shells, sub shell and orbitals. It covers the AQA syllabus, but can be used with others. It contains a 30+ page Power Point which explains how electrons fill up the lowest energy levels first, how electrons prefer to stay unpaired and the rather tricky transition metal 4s/3d energy levels. It explains how to write the configuration for neutral atoms as well as ions and contains a page of questions, based around exam questions from AQA. Questions have comments from the examiners report to say how difficult students in the exam found this type of question. It also contains: Periodic Table with all configurations Student sheet with diagrams on for students to add notes to (or cut out and stick in diagrams) Help sheet to practice configuration Question sheet with answers provided on the Power Point Homework/Extra Questions sheet to challenge the most able An animated slide that shows all 36 configurations on an energy level diagram and position on the Periodic table. Other AS lessons are available: Ionisation energy:https://www.tes.com/teaching-resource/ionisation-energy-as-level-12412339 TOF Spectrometer and Isotope Calcuations: https://www.tes.com/teaching-resource/mass-spectrometer-tof-and-isotope-calculations-12386980 Oxidation States: https://www.tes.com/teaching-resource/oxidation-states-lesson-as-level-12421177 Rules for Electron Configuration Sheet can be found here for free: https://www.tes.com/teaching-resource/electronic-configuration-rules-for-s-p-d-a-level-12406254 Please feel free to visit my shop where there are free and paid resources on science at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Please comment if you have found this resource useful. Thank you

I have now added a sheet explaining how this can be done at home by students themselves. This KS4 AQA Required Practical covers the planning, carrying out and analysing of results with 9-1 graded exam style questions. It lasts approx 2 hours. The ppt carries the students through all aspects of the practical including hypothesis, variables, safety, fair testing, method, analysing results and evaluating the validity. It finishes with exam style questions and answers individually graded to assess students. Resource includes: 30+ slide ppt to guide the students through the practical (with answers and examples) Two page student method/practical sheet that follows the slides Two page guide sheet (Required Practical Graphic Organiser worth £1.50 from my shop) based on IV Characteristics Apparatus list for technician Learning Objectives on each slide linked to AQA specification It is available in a bundle with 8 other “home use” required practicals here: https://www.tes.com/teaching-resource/nine-required-practicals-for-home-use-12461001 If you would like to see a FREE sample similar to this before you buy, the I-V Characteristics one is free here: https://www.tes.com/teaching-resource/-updated-i-v-characteristics-required-practical-planning-with-9-1-graded-questions-and-answers-12199364 If you want the FREE version of the questions only (my most downloaded resource) they are here: https://www.tes.com/teaching-resource/physics-required-practical-worksheet-revision-11791358 If you want a bundle of ALL the Physics Practicals, click here: https://www.tes.com/teaching-resource/all-physics-planning-practicals-with-graded-questions-and-answers-12227081 If you ONLY want the questions and answers, they are available as a bundle here: https://www.tes.com/teaching-resource/physics-required-practical-worksheets-with-9-1-graded-exam-style-questions-with-answers-12199346 Please comment if you have found this useful If you would like more required practical resources (or other science resources) free and paid, please check out my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you.

This Chemistry resource is used with KS4 students, it is designed to ask 9-1 exam style questions on differences between Transition Metals and Group 1. It lasts approximately 1 hour. It encourages students to use keywords and link concepts together. It includes answers for peer or self assessment. If you would like to try a free sample of a similar lesson to this before you buy, check out: https://www.tes.com/teaching-resource/atoms-elements-mixtures-compounds-revision-lesson-12190880 This resource is available as a BUNDLE with 5 other lessons that cover the other parts of the Atomic Structure and Periodic Table at: https://www.tes.com/teaching-resource/atomic-structure-and-periodic-table-revison-pack-12193157 It is a complete lesson with: Starter: Matching keyword to definition Poster/Graphic Organiser of all the Keywords and definitions for this part of the course to help with: Main activity 1: Comparing and Contrasting using Venn Diagram Main activity 2: Completing a concept map to help make links between words Main activity 3: 7 sheets of questions of adapted AQA past paper questions with answer sheet Plenary: Tick list for evaluation linked to the specification and the questions in activity 3. It is a lesson to: Improve literacy Increase use of keywords Aid Understanding by correct definitions Revision of all parts of this part of the specification (so AQA don’t catch us out…) Link key words and concepts in the student’s minds Provide visual stimuli I hope you find this resource useful, for more Periodic table resources, please check out my shop with FREE and paid resources at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Please comment if you have found this resource useful Thank you

This KS4 resource contains worksheet questions (and answers) for all the Physics Required Practicals with each individual exam style 9-1 graded questions. It employs a lot of Maths, AQA working scientifically and AQA style exam questions with model answers. It is normally used at the end of the practical as a test/check of the students understanding, but can also be used as a revision/homework activity. It can also be used as a cover lesson (with answers). Students can also peer/self assess with the answer sheets and also indicate which part they found most difficult on the top right of the paper so that the teacher can flick through and see what needs covering again. It contains: Specific Heat Capacity, Thermal insulation, Resistance, I-V characteristics, Density. Light, Force and Extension, Acceleration, Waves in a solid and Waves in a liquid and Radiation and Absorption. For a free sample (I-V Characteristics) to see the quality, before you consider purchasing click here: https://www.tes.com/teaching-resource/i-v-characteristics-required-practical-worksheet-12199364 For a Bundle with the Biology and Chemistry verisons, click here: https://www.tes.com/teaching-resource/all-physics-chemistry-and-biology-required-practical-revision-9-1-graded-questions-and-answer-12227276 This is an updated version of my most downloaded free resource (see below for free version). The free version (just the questions on pdf) can be found at my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Please comment if you have this useful. Thank you.

This KS4 Chemistry GCSE lesson asks 9-1 exam style questions and model answers on Development of the Atomic Model. It lasts approx 1 hour. It contains helpsheets for students of lower ability. It encourages students to use keywords and link concepts together. The updated resource now has extra help sheets for one of the activities. If you would like a free sample of a similar lesson to try before you buy, check out: https://www.tes.com/teaching-resource/atoms-elements-mixtures-compounds-revision-lesson-12190880 This resource is available as a BUNDLE with 5 other lessons that cover the other parts of the Atomic Structure and Periodic Table at: https://www.tes.com/teaching-resource/atomic-structure-and-periodic-table-revison-pack-12193157 This resource is aimed at those students who have been taught the AQA Atomic Structure and Periodic Table course, ages 14+. It is a complete revision lesson with: Starter: Matching keyword to definition Poster/Graphic Organiser of all the Keywords and definitions for this part of the course to help with: Main activity 1: Completing a concept map to help make links between words Main activity 2: Find and Correct Mistakes in Article Main activity 3: 4 sheets of questions of adapted AQA past paper questions with answer sheet Plenary: Ticklist for evaluation linked to the specification and the questions in activity 3. It is a lesson to: Improve literacy Increase use of keywords Aid Understanding by correct definitions Revision of all parts of this part of the specification (so AQA don’t catch us out…) Link key words and concepts in the students minds Provide visual stimuli I hope you find this resource useful, I will be uploading the rest of the revision for the course Atoms and Periodic Table. Checkout a FREE Atoms, Elements, Compounds and Mixtures complete lesson at: https://www.tes.com/teaching-resource/free-atoms-elements-mixtures-compounds-aqa-2019-revision-activities-12190880 This resource is available as a BUNDLE with 5 other lessons that cover the other parts of the Atomic Structure and Periodic Table at: https://www.tes.com/teaching-resource/atomic-structure-and-periodic-table-revison-pack-12193157 Please comment with any improvements or suggestions for further resources. Thank you

This is 40+ page PowerPoint with mini-plenary questions after each section and exam style questions at the end of the lesson. It includes animations to show why ionisation energies change. It explains the effect of shielding, nuclear charge and distance from nucleus. It also explains the effect of the p orbitals and electron replusion as you go across a period. It includes: Student sheet with key diagrams on for students to add notes on Key slides to print out (or give to students for study at home) Exam style questions and answers (with examiner’s comments on how well other students answered it) Lots of examples throughout to test students understanding. Other AS lessons are available: Electronic Structure:https://www.tes.com/teaching-resource/electronic-structure-orbital-configuration-in-s-p-d-as-level-12405614 TOF Spectrometer and Isotope Calculations: https://www.tes.com/teaching-resource/mass-spectrometer-tof-and-isotope-calculations-12386980 Oxidation States: https://www.tes.com/teaching-resource/oxidation-states-lesson-as-level-12421177 A free sheet of some questions from this resource is also available here: https://www.tes.com/teaching-resource/ionisation-questions-and-answers-as-level-12412527 For more resources (free and paid) please check out my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you.

This KS4 AQA Required Practical covers the planning, carrying out and analysing of results with 9-1 graded exam style questions. It lasts approx 2 hours. The ppt carries the students through all aspects of the practical including hypothesis, variables, safety, fair testing, method, analysing results and evaluating the validity. It finishes with exam style questions individually graded to assess students. Resource includes: 30+ slide ppt to guide the students through the practical (with answers and examples) Two page student method/practical sheet that follows the slides Two page guide sheet (worth £1.50 from my shop) Apparatus list for technician Learning Objectives on each slide linked to AQA specification If you would like to see a free sample similar to this before you buy, the Osmosis one is free here: https://www.tes.com/teaching-resource/updated-osmosis-required-practical-planning-with-graded-with-9-1-exam-style-questions-and-answers-12181019 All the biology practicals are available as a bundle here: https://www.tes.com/teaching-resource/all-biology-planning-practicals-with-graded-questions-and-answer-12220999 If you just want the questions and answers, they are available as a bundle here: https://www.tes.com/teaching-resource/biology-required-practical-worksheets-with-graded-9-1-exam-style-questions-and-answers-12181051 Please comment if you have found this useful If you would like more required practical resources (or any other resources) free and paid, please check out my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you.

This resources consists of photographs and exam style questions with a completed graphic organiser helpsheet. This is aimed at AQA students to encourage them to practice exam style questions on required practicals anytime during the lesson. The questions are specifically generic so they can be asked about almost any of the practicals and consequently they do not need to go next to any particular one, producing over 400 combinations of questions with images. The questions are colour coded for different levels with Red-Hard, Orange-Medium and Green-Easier (one could say differentiated, but one would be stretching the truth). Also included is the required practical placemat (worth a whole £1!) to help your students answer the questions on the display. Suggestions for Activities: I generally sit my students round the display and then ask them to chose a question and I (or another student) choose a practical or vice versa. Then we discuss the answer as a class or nominate another student or practical or question, (or stick them round my board and let the display soak into their minds through osmosis / diffusion or ask a question as a plenary) The set of images and questions can be printed smaller and students and given to groups of students who turn them face down and turn two over, an image and a question, which they then answer. This game works well and makes the question and required practical more random (like the exam). Font size is set at 80 pt so that it can be seen at about 10 feet away (Approx 72 pt per 10 ft of distance is the rule) I hope you find this resource useful Thank you for reading this far. Please comment. My shop with free and paid resources is at: https://www.tes.com/teaching-resources/shop/stephenkemp193

I have now added a sheet explaining how this can be done at home by students themselves. This KS4 AQA Required Practical covers the planning, carrying out and analysing of results with 9-1 graded exam style questions. It lasts approx 2 hours. The ppt carries the students through all aspects of the practical including hypothesis, variables, safety, fair testing, method, analysing results and evaluating the validity. It finishes with exam style questions individually graded to assess students. Resource includes: 30+ slide ppt to guide the students through the practical (with answers and examples) Two page student method/practical sheet that follows the slides Two page guide sheet (Required Practical Graphic Organiser worth £1.50 from my shop) based on IV Characteristics A sheet on how to measure the Spring Constant using your graph Apparatus list for technician Learning Objectives on each slide linked to AQA specification It is available in a bundle with 8 other “home use” required practicals here: https://www.tes.com/teaching-resource/nine-required-practicals-for-home-use-12461001 If you would like to see a FREE sample similar to this before you buy, the I-V Characteristics one is free here: https://www.tes.com/teaching-resource/-updated-i-v-characteristics-required-practical-planning-with-9-1-graded-questions-and-answers-12199364 If you want the FREE version of the questions only (my most downloaded resource) they are here: https://www.tes.com/teaching-resource/physics-required-practical-worksheet-revision-11791358 If you want a bundle of ALL the Physics Practicals, click here: https://www.tes.com/teaching-resource/all-physics-planning-practicals-with-graded-questions-and-answers-12227081 If you ONLY want the questions and answers, they are available as a bundle here: https://www.tes.com/teaching-resource/physics-required-practical-worksheets-with-9-1-graded-exam-style-questions-with-answers-12199346 Please comment if you have found this useful. If you would like more required practical resources (or other science resources) free and paid, please check out my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you.

This booklet covers the Ecology topic at KS4, but maybe suitable for some KS3. It contains 15 pages where on each page is a keyword and definition, an image, example and some simple questions and a simple extension question. It also contains a Power Point which circles key points to show the students where to look in their booklets and help them understand the ideas and processes. Also included are two interactive activities, one on population changes in an ecosystem and one on land use and effects on food production. These activities are simple, but challenge the student to give reasons for their choices. This booklet also has project activities on each page for students to work on home at. All the information is there in the booklet so that at the end they have a complete booklet to take home and hopefully revise from. To see if this resource is for you, i have produced a free booklet on infection and response (with a focus on the Corona Virus) here: https://www.tes.com/teaching-resource/infection-and-response-to-the-corona-virus-covid-19-booklet-12270746 Other booklets are available in my shop (see link below) Please check out my shop for more free and paid resources: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you. Please Comment if you found this resource useful.

This KS4 AQA Required Practical covers the Resistance in a Wire and Series and Parallal. It also includes planning, carrying out and analysing of results with 9-1 graded exam style questions. It lasts approx 2 hours. The ppt carries the students through all aspects of the practical including hypothesis, variables, safety, fair testing, method, analysing results and evaluating the validity. It finishes with exam style questions individually graded to assess students. Resource includes: 30+ slide ppt to guide the students through the practical (with answers and examples) Two page student method/practical sheet that follows the slides Two page guide sheet (Required Practical Graphic Organiser worth £1.50 from my shop) based on IV Characteristics Apparatus list for technician Learning Objectives on each slide linked to AQA specification If you would like to see a FREE sample similar to this before you buy, the I-V Characteristics one is free here: https://www.tes.com/teaching-resource/-updated-i-v-characteristics-required-practical-planning-with-9-1-graded-questions-and-answers-12199364 If you want the FREE version of the questions only (my most downloaded resource) they are here: https://www.tes.com/teaching-resource/physics-required-practical-worksheet-revision-11791358 If you want a bundle of ALL the Physics Practicals, click here: https://www.tes.com/teaching-resource/all-physics-planning-practicals-with-graded-questions-and-answers-12227081 If you ONLY want the questions and answers, they are available as a bundle here: https://www.tes.com/teaching-resource/physics-required-practical-worksheets-with-9-1-graded-exam-style-questions-with-answers-12199346 Please comment if you have found this useful If you would like more required practical resources (or other science resources) free and paid, please check out my shop at: https://www.tes.com/teaching-resources/shop/stephenkemp193 Thank you.