We understand the importance of education. We offer tailored private tuition designed to maximise success at GCSE, A Level and beyond. Our tutors are experienced professionals, teachers and top-tier graduates with extensive knowledge in their subjects.
On Tes we offer high quality board-specific resources. Please check back regularly as we are continually updating our stock.
We understand the importance of education. We offer tailored private tuition designed to maximise success at GCSE, A Level and beyond. Our tutors are experienced professionals, teachers and top-tier graduates with extensive knowledge in their subjects.
On Tes we offer high quality board-specific resources. Please check back regularly as we are continually updating our stock.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 3.3 - Understand ways to prepare for earthquakes (warning and evacuation, building design, remote sensing and GIS).
Specification Point 3.3 - Understand short-term responses and relief (emergency aid, shelter and supplies).
Specification Point 3.3 - Understand longer-term planning (risk assessment, hazard mapping and rebuilding programmes).
Complete set of Chapter 3 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 2.3 - Understand that there are different coastal management strategies, including soft engineering, hard engineering and shoreline management plans.
Complete set of Chapter 2 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 3.1 - Understand the characteristics, distribution and measurement of different types of natural hazards including tropical cyclones, earthquakes and volcanoes.
Complete set of Chapter 3 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.2 - Understand informal employment: causes (economic development, rural-urban migration) and characteristics (advantages and disadvantages) in a named megacity.
Complete set of Chapter 5 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 1.4 - Assessment of river fieldwork skills.
Complete set of Chapter 4 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 6.1 - Understand the contrasting trends in urbanisation over the last 50 years in different parts of the world, including the processes of suburbanisation and counter-urbanisation.
Complete set of Chapter 7 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.2.1 - Approaches in psychology.
The biological approach: the influence of genes, biological structures and neurochemistry on behaviour.
Genotype and phenotype, genetic basis of behaviour, evolution and behaviour.
Complete set of Chapter 5 Lectures are available.
Complete set of concise, modern presentations for AQA A Level Psychology (7181 and 7182) Chapter 5 - Approaches in Psychology. Contains colour coded specification points. Seven presentations included:
21 - The Origins of Psychology
22 - The Behaviourist Approach
23 - Social Learning Theory
24 - The Cognitive Approach
25 - The Biological Approach
26 - The Psychodynamic Approach
27 - Humanistic Psychology
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.2.2 - Biopsychology.
Ways of studying the brain: scanning techniques, including functional magnetic resonance imaging (fMRI); electroencephalogram (EEGs) and event-related potentials (ERPs); postmortem examinations.
Complete set of Chapter 6 Lectures are available.
Complete set of companion PDF worksheets for Edexcel IGCSE Chemistry (4CH1) Chapter 4 - Metals, Halogens and Atmospheric Gases. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Five worksheets included:
16 - Group 1 Elements
17 - Group 7 Elements
18 - Atmospheric Gases
19 - Metals and the Reactivity Series
20 - The Uses of Metals
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.2.3.2 - Data handling and analysis.
Quantitative and qualitative data; the distinction between qualitative and quantitative data collection techniques.
Primary and secondary data, including meta-analysis.
Descriptive statistics: measures of central tendency – mean, median, mode; calculation of mean, median and mode; measures of dispersion; range and standard deviation; calculation of range.
Complete set of Chapter 7 Lectures are available.
Complete set of PDF worksheets for Edexcel IGCSE Biology (4BI0) Chapter 4 - Coordination and Control. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. All questions are original. Nine worksheets included:
27 - Excretion
28 - The Kidneys
29 - Coordination
30 - Coordination in Plants
31 - Coordination in Humans
32 - Reflexes and the Eye
33 - Controlling Body Temperature
34 - Hormones
35 - More Hormones
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.3.2 - Relationships.
Parasocial relationships: levels of parasocial relationships, the absorption addiction model and the attachment theory explanation.
Complete set of Chapter 9 Lectures are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 15 - Electromagnetic Waves. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 3.7 - Use the relationship between frequency and wavelength in different contexts including sound waves and electromagnetic waves.
Specification Point 3.8 - Explain why there is a change in the observed frequency and wavelength of a wave when its source is moving relative to an observer, and that this is known as the Doppler effect.
Specification Point 3.10 - Know that light is part of a continuous electromagnetic spectrum that includes radio, microwave, infrared, visible, ultraviolet, x-ray and gamma ray radiations and that all these waves travel at the same speed in free space.
Specification Point 3.11 - Know the order of the electromagnetic spectrum in terms of decreasing wavelength and increasing frequency, including the colours of the visible spectrum.
Specification Point 3.12 - Explain some of the uses of electromagnetic radiations.
Specification Point 3.13 - Explain the detrimental effects of excessive exposure of the human body to electromagnetic waves and describe simple protective measures against the risks.
Complete set of Chapter 3 Worksheets are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 3.7 - Use the relationship between frequency and wavelength in different contexts including sound waves and electromagnetic waves.
Specification Point 3.8 - Explain why there is a change in the observed frequency and wavelength of a wave when its source is moving relative to an observer, and that this is known as the Doppler effect.
Specification Point 3.10 - Know that light is part of a continuous electromagnetic spectrum that includes radio, microwave, infrared, visible, ultraviolet, x-ray and gamma ray radiations and that all these waves travel at the same speed in free space.
Specification Point 3.11 - Know the order of the electromagnetic spectrum in terms of decreasing wavelength and increasing frequency, including the colours of the visible spectrum.
Specification Point 3.12 - Explain some of the uses of electromagnetic radiations.
Specification Point 3.13 - Explain the detrimental effects of excessive exposure of the human body to electromagnetic waves and describe simple protective measures against the risks.
Complete set of Chapter 3 Lessons are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 1.30P - Know and use the relationship between the moment of a force and its perpendicular distance from the pivot.
Specification Point 1.31P - Know that the weight of a body acts through its centre of gravity.
Specification Point 1.32P - Use the principle of moments for a simple system of parallel forces acting in one plane.
Specification Point 1.33P - Understand how the upward forces on a light beam, supported at its ends, vary with the position of a heavy object placed on the beam.
Complete set of Chapter 1 Lessons are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 2.22P - Identify common materials which are electrical conductors or insulators, including metals and plastics.
Specification Point 2.23P - Practical: investigate how insulating materials can be charged by friction.
Specification Point 2.24P - Explain how positive and negative electrostatic charges are produced on materials by the loss and gain of electrons.
Specification Point 2.25P - Know that there are forces of attraction between unlike charges and forces of repulsion between like charges.
Specification Point 2.26P - Explain electrostatic phenomena in terms of the movement of electrons.
Specification Point 2.27P - Explain the potential dangers of electrostatic charges.
Specification Point 2.28P - Explain some uses of electrostatic charges.
Complete set of Chapter 2 Lectures are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 13 - Static Electricity. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 2.22P - Identify common materials which are electrical conductors or insulators, including metals and plastics.
Specification Point 2.23P - Practical: investigate how insulating materials can be charged by friction.
Specification Point 2.24P - Explain how positive and negative electrostatic charges are produced on materials by the loss and gain of electrons.
Specification Point 2.25P - Know that there are forces of attraction between unlike charges and forces of repulsion between like charges.
Specification Point 2.26P - Explain electrostatic phenomena in terms of the movement of electrons.
Specification Point 2.27P - Explain the potential dangers of electrostatic charges.
Specification Point 2.28P - Explain some uses of electrostatic charges.
Complete set of Chapter 2 Worksheets are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 23 - Changes of State. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 5.8P - Explain why heating a system will change the energy stored within the system and raise its temperature or produce changes of state.
Specification Point 5.9P - Describe the changes that occur when a solid melts to form a liquid, and when a liquid evaporates or boils to form a gas.
Specification Point 5.10P - Describe the arrangement and motion of particles in solids, liquids and gases.
Specification Point 5.11P - Practical: obtain a temperature–time graph to show the constant temperature during a change of state.
Specification Point 5.12P - Know that specific heat capacity is the energy required to change the temperature of an object by one degree celsius per kg of mass.
Specification Point 5.13P - Use an equation to derive the change in thermal energy in a system.
Specification Point 5.14P - Practical: investigate the specific heat capacity of materials including water and some solids.
Complete set of Chapter 5 Worksheets are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 5.8P - Explain why heating a system will change the energy stored within the system and raise its temperature or produce changes of state.
Specification Point 5.9P - Describe the changes that occur when a solid melts to form a liquid, and when a liquid evaporates or boils to form a gas.
Specification Point 5.10P - Describe the arrangement and motion of particles in solids, liquids and gases.
Specification Point 5.11P - Practical: obtain a temperature–time graph to show the constant temperature during a change of state.
Specification Point 5.12P - Know that specific heat capacity is the energy required to change the temperature of an object by one degree celsius per kg of mass.
Specification Point 5.13P - Use an equation to derive the change in thermal energy in a system.
Specification Point 5.14P - Practical: investigate the specific heat capacity of materials including water and some solids.
Complete set of Chapter 5 Lessons are available.