We understand the importance of education. We offer tailored private tuition designed to maximise success at GCSE, A Level and beyond. Our tutors are experienced professionals, teachers and top-tier graduates with extensive knowledge in their subjects.
On Tes we offer high quality board-specific resources. Please check back regularly as we are continually updating our stock.
We understand the importance of education. We offer tailored private tuition designed to maximise success at GCSE, A Level and beyond. Our tutors are experienced professionals, teachers and top-tier graduates with extensive knowledge in their subjects.
On Tes we offer high quality board-specific resources. Please check back regularly as we are continually updating our stock.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 5.8P - Explain why heating a system will change the energy stored within the system and raise its temperature or produce changes of state.
Specification Point 5.9P - Describe the changes that occur when a solid melts to form a liquid, and when a liquid evaporates or boils to form a gas.
Specification Point 5.10P - Describe the arrangement and motion of particles in solids, liquids and gases.
Specification Point 5.11P - Practical: obtain a temperature–time graph to show the constant temperature during a change of state.
Specification Point 5.12P - Know that specific heat capacity is the energy required to change the temperature of an object by one degree celsius per kg of mass.
Specification Point 5.13P - Use an equation to derive the change in thermal energy in a system.
Specification Point 5.14P - Practical: investigate the specific heat capacity of materials including water and some solids.
Complete set of Chapter 5 Lectures are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 22 - Density and Pressure. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 5.3 - Know and use the relationship between density, mass and volume.
Specification Point 5.4 - Practical: investigate density using direct measurements of mass and volume.
Specification Point 5.5 - Know and use the relationship between pressure, force and area.
Specification Point 5.6 - Understand how the pressure at a point in a gas or liquid at rest acts equally in all directions.
Specification Point 5.7 - Know and use the relationship for pressure difference.
Complete set of Chapter 5 Worksheets are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 5.3 - Know and use the relationship between density, mass and volume.
Specification Point 5.4 - Practical: investigate density using direct measurements of mass and volume.
Specification Point 5.5 - Know and use the relationship between pressure, force and area.
Specification Point 5.6 - Understand how the pressure at a point in a gas or liquid at rest acts equally in all directions.
Specification Point 5.7 - Know and use the relationship for pressure difference.
Complete set of Chapter 5 Lessons are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 5.3 - Know and use the relationship between density, mass and volume.
Specification Point 5.4 - Practical: investigate density using direct measurements of mass and volume.
Specification Point 5.5 - Know and use the relationship between pressure, force and area.
Specification Point 5.6 - Understand how the pressure at a point in a gas or liquid at rest acts equally in all directions.
Specification Point 5.7 - Know and use the relationship for pressure difference.
Complete set of Chapter 5 Lectures are available.
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 4.11 - Know and use the relationship between work done, force and distance moved in the direction of the force.
Specification Point 4.12 - Know that work done is equal to energy transferred.
Specification Point 4.13 - Know and use the relationship between gravitational potential energy, mass, gravitational field strength and height.
Specification Point 4.14 - Know and use the relationship between kinetic energy, mass and speed.
Specification Point 4.15 - Understand how conservation of energy produces a link between gravitational potential energy, kinetic energy and work.
Specification Point 4.16 - Describe power as the rate of transfer of energy or the rate of doing work.
Specification Point 4.17 - Use the relationship between power, work done and time taken.
Complete set of Chapter 4 Lessons are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 20 - Work and Power. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 4.11 - Know and use the relationship between work done, force and distance moved in the direction of the force.
Specification Point 4.12 - Know that work done is equal to energy transferred.
Specification Point 4.13 - Know and use the relationship between gravitational potential energy, mass, gravitational field strength and height.
Specification Point 4.14 - Know and use the relationship between kinetic energy, mass and speed.
Specification Point 4.15 - Understand how conservation of energy produces a link between gravitational potential energy, kinetic energy and work.
Specification Point 4.16 - Describe power as the rate of transfer of energy or the rate of doing work.
Specification Point 4.17 - Use the relationship between power, work done and time taken.
Complete set of Chapter 4 Worksheets are available.
Complete set of concise, modern presentations and associated PDF worksheets for Edexcel IGCSE Physics (4PH1) Chapter 2 - Electricity. Contains colour coded specification points with handmade vector graphics. Five presentations and companion worksheets included:
9 - Mains Electricity
10 - Power, Current and Voltage
11 - Circuits Part 1
12 - Circuits Part 2
13 - Static Electricity
Powerpoint lecture and associated PDF worksheet covering the following in a modern, concise format:
Specification Point 5.15 - Explain how molecules in a gas have random motion and that they exert a force and hence a pressure on the walls of a container.
Specification Point 5.16 - Understand why there is an absolute zero of temperature which is –273 °C.
Specification Point 5.17 - Describe the Kelvin scale of temperature and be able to convert between the Kelvin and Celsius scales.
Specification Point 5.18 - Understand why an increase in temperature results in an increase in the average speed of gas molecules.
Specification Point 5.19 - Know that the Kelvin temperature of a gas is proportional to the average kinetic energy of its molecules.
Specification Point 5.20 - Explain, for a fixed amount of gas, the qualitative relationship between: pressure and volume at constant temperature, pressure and Kelvin temperature at constant volume.
Specification Point 5.21 - Use the relationship between the pressure and Kelvin temperature of a fixed mass of gas at constant volume.
Specification Point 5.22 - Use the relationship between the pressure and volume of a fixed mass of gas at constant temperature.
Complete set of Chapter 5 Lessons are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 7.1 - Use the following units: becquerel (Bq), centimetre (cm), hour (h), minute (min) and second (s).
Specification Point 7.2 - Describe the structure of an atom in terms of protons, neutrons and electrons.
Specification Point 7.3 - Know the terms atomic number, mass number and isotope.
Specification Point 7.4 - Know that alpha particles, beta particles and gamma rays are ionising radiations emitted from unstable nuclei in a random process.
Specification Point 7.5 - Describe the nature of alpha particles, beta particles, and gamma rays, and recall that they may be distinguished in terms of penetrating power and ability to ionise.
Specification Point 7.6 - Practical: investigate the penetration powers of different types of radiation using either radioactive sources or simulations.
Specification Point 7.7 - Describe the effects on the atomic and mass numbers of a nucleus of the emission of each of the four main types of radiation (alpha, beta, gamma and neutron radiation).
Specification Point 7.8 - Understand how to balance nuclear equations in terms of mass and charge.
Complete set of Chapter 7 Lectures are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 28 - Radioactivity Part 1. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 7.1 - Use the following units: becquerel (Bq), centimetre (cm), hour (h), minute (min) and second (s).
Specification Point 7.2 - Describe the structure of an atom in terms of protons, neutrons and electrons.
Specification Point 7.3 - Know the terms atomic number, mass number and isotope.
Specification Point 7.4 - Know that alpha particles, beta particles and gamma rays are ionising radiations emitted from unstable nuclei in a random process.
Specification Point 7.5 - Describe the nature of alpha particles, beta particles, and gamma rays, and recall that they may be distinguished in terms of penetrating power and ability to ionise.
Specification Point 7.6 - Practical: investigate the penetration powers of different types of radiation using either radioactive sources or simulations.
Specification Point 7.7 - Describe the effects on the atomic and mass numbers of a nucleus of the emission of each of the four main types of radiation (alpha, beta, gamma and neutron radiation).
Specification Point 7.8 - Understand how to balance nuclear equations in terms of mass and charge.
Complete set of Chapter 7 Worksheets are available.
Complete set of concise, modern presentations and associated PDF worksheets for Edexcel IGCSE Physics (4PH1) Chapter 4 - Energy Resources and Transfer. Contains colour coded specification points with handmade vector graphics. Four presentations and companion worksheets included:
18 - Energy
19 - Thermal Energy
20 - Work and Power
21 - Sources of Energy
Complete set of concise, modern presentations and associated PDF worksheets for Edexcel IGCSE Physics (4PH1) Chapter 5 - Solids, Liquids and Gases. Contains colour coded specification points with handmade vector graphics. Three presentations and companion worksheets included:
22 - Density and Pressure
23 - Changes of State
24 - Ideal Gases
Complete set of concise, modern presentations for Edexcel IGCSE Physics (4PH1) Chapter 7 - Radioactivity. Contains colour coded specification points. Three presentations included:
28 - Radioactivity Part 1
29 - Radioactivity Part 2
30 - Fission and Fusion
Complete set of companion PDF worksheets for Edexcel IGCSE Physics (4PH1) Chapter 6 - Magnetism and Electromagnetism. Contains short answer questions, an activity requiring lateral thinking and exam-style questions. Three worksheets included:
25 - Magnetism
26 - Electromagnets Part 1
27 - Electromagnets Part 2
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 6.9P - Describe the construction of electromagnets.
Specification Point 6.10P - Draw magnetic field patterns for a straight wire, a flat circular coil and a solenoid when each is carrying a current.
Specification Point 6.11P - Know that there is a force on a charged particle when it moves in a magnetic field as long as its motion is not parallel to the field.
Specification Point 6.17P - Describe the structure of a transformer, and understand that a transformer changes the size of an alternating voltage by having different numbers of turns on the input and output sides.
Specification Point 6.18P - Explain the use of step-up and step-down transformers in the large-scale generation and transmission of electrical energy.
Specification Point 6.19P - Know and use the relationship between input and output voltages and the turns ratio for a transformer.
Specification Point 6.20P - Know and use the relationship between input power and output power.
Complete set of Chapter 6 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 6.8 - Know that an electric current in a conductor produces a magnetic field around it.
Specification Point 6.12 - Understand why a force is exerted on a current-carrying wire in a magnetic field, and how this effect is applied in simple D.C. electric motors and loudspeakers.
Specification Point 6.13 - Use the left-hand rule to predict the direction of the resulting force when a wire carries a current perpendicular to a magnetic field.
Specification Point 6.14 - Describe how the force on a current-carrying conductor in a magnetic field changes with the magnitude and direction of the field and current.
Specification Point 6.15 - Know that a voltage is induced in a conductor or a coil when it moves through a magnetic field or when a magnetic field changes through it and describe the factors that affect the size of the induced voltage.
Specification Point 6.16 - Describe the generation of electricity by the rotation of a magnet within a coil of wire and of a coil of wire within a magnetic field, and describe the factors that affect the size of the induced voltage.
Complete set of Chapter 6 Lectures are available.
Companion PDF worksheet for Edexcel IGCSE Physics Lecture 5 - Gravity, Weight and Drag. Contains short answer questions, an activity requiring lateral thinking and exam-style questions.
Specification Point 1.18 - Know and use the relationship between weight, mass and gravitational field strength.
Specification Point 1.19 - Know that the stopping distance of a vehicle is made up of the sum of the thinking distance and the braking distance.
Specification Point 1.20 - Describe the factors affecting vehicle stopping distance, including speed, mass, road condition and reaction time.
Specification Point 1.21 - Describe the forces acting on falling objects and explain why falling objects reach a terminal velocity.
Complete set of Chapter 1 Worksheets are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.3.5 - Schizophrenia.
Drug therapy: typical and atypical antipsychotics.
Cognitive behaviour therapy and family therapy as used in the treatment of schizophrenia.
The importance of an interactionist approach in explaining and treating schizophrenia.
Complete set of Chapter 12 Lectures are available.
Powerpoint lecture covering the following in a modern, concise format:
Specification Point 4.3.6 - Eating behaviour.
Biological explanations for anorexia nervosa, including genetic and neural explanations.
Psychological explanations for anorexia nervosa: family systems theory, including enmeshment, autonomy and control; social learning theory, including modelling, reinforcement and media; cognitive theory, including distortions and irrational beliefs.
Complete set of Chapter 13 Lectures are available.