AQA Chemistry New Spec (Paper 2 Topic 2- exams 2018) – Organic Chemistry (4.7)AQA Chemistry New Specification! All lessons to cover the triple part of topic 7 (paper 2, topic 2) – Organic Chemistry, from the new spec (exams 2018). Lessons cover the Triple chemistry science route chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Chemistry Triple science specification points and lessons: 4.7.2.1 – Structure and formulae of alkenes (C7.4 lesson) 4.7.2.2 – Reactions of alkenes (C7.4 lesson) 4.7.2.3 – Alcohols (C7.5 lesson) 4.7.2.4 – Carboxylic acids (C7.6 lesson) 4.7.2.4 – Reaction of carboxylic acid and alcohols (esters) (C7.7 lesson) 4.7.3.1 – Addition polymerisation (C7.8 lesson) 4.7.3.2 – Condensation polymerisation (HT) (C7.9 lesson) 4.7.3.3 – Amino acids (HT) (C7.10 lesson)  4.7.3.4 - DNA and other naturally occurring polymers (HT) (C7.11 lesson)

AQA Biology New GCSE Spec (Paper 2 Topic 3 - exams 2018) – Ecology (4.7) All lessons to cover the SEPARATE Biology course of topic 7 (paper 2, topic 3) – Ecology (4.7), from the new spec (exams 2018). . The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy specification points and lessons: 4.7.1.1 - Communities (B7.1 lesson) 4.7.1.2 - Abiotic factors(B7.1 lesson) 4.7.1.3 - Biotic factors (B7.1 lesson) 4.7.1.4 – Adaptations (B7.2 lesson) 4.7.2.1 - Levels of organisation (feeding relationships + predator - prey cycles) (B7.3 lesson) 4.7.2.1- Levels of organisation (required practical 9 - population sizes) (B7.4 lesson) 4.7.2.2 - How materials are cycled (B7.5 lesson) 4.7.2.3 - Decomposition (Biology only) (B7.6 Lesson) Required practical 10 - Investigate the effect of temperature on the rate of decay of fresh milk by measuring pH change 4.7.3.2 - Waste management (B7.9 lesson) 4.7.3.1 - Biodiversity (B7.7 lesson) 4.7.3.6 - Maintaining Biodiversity (B7.7 lesson) 4.7.2.4 - Impact of environmental change (Biology only) (B7.8 lesson) 4.7.3.2 - Waste management (B7.9 lesson) 4.7.3.3 - Land use (B7.9 lesson) 4.7.3.4 - Deforestation (B7.9 lesson) 4.7.3.5 - Global warming (B7.9 lesson) 4.7.4.1 - Trophic levels (Biology only) (B7.10 lesson) 4.7.4.2 - Pyramids of biomass (Biology only) (B7.10 lesson) 4.7.4.3 - Transfer of biomass (Biology only) (B7.10 lesson) 4.7.5.1 - Factors affecting food security (Biology only) (B7.11 lesson) 4.7.5.2 - Farming techniques (Biology only) (B7.11 lesson) 4.7.5.3 - Sustainable fisheries (Biology only) (B7.11 lesson) 4.7.5.4 - Role of biotechnology (Biology only) (B7.11 lesson) To buy all of these lessons separately from my shop would cost £33.

This is a revision power point to be used when revising the content of AQA Chemistry paper 2 - it covers the key areas of the trilogy/combined course. The activities/questions/information slides covering the areas of paper 2 that tend to be most difficult for students and could be used over a number of revision lessons to prepare your students for their exams. The power point includes: An overview of all topics on paper 2 Chemistry Recap of the required practical activities Information slides to quickly recap areas of paper 2 Differentiated activities that ask students to apply their knowledge of the different topics. More difficult questions are there to ask students to apply their knowledge to unfamiliar situations. Stretch activities for the more able. One mark questions to quickly recap topics and establish what topics need to be revisited more thoroughly than others. The main topic areas that are covered on this revision power point are : Rates of reaction - with required practical on this Collision theory Catalysts Equilibrium Separation Chromatography - with required practical Crude oil Fractional distillation alkanes cracking the atmosphere pollution the greenhouse effect human impact potable water purifying water life cycle assessments Amongst many other areas covered

OCR 21st century science C1 lessons. All lessons to cover OCR C1 unit of work. Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.

This is a revision power point to be used when revising the content of AQA Biology paper 2 - it covers the key areas of the trilogy/combined course. The activities/questions/information slides covering the areas of paper 2 that tend to be most difficult for students and could be used over a number of revision lessons to prepare your students for their exams. The power point includes: An overview of all topics on paper 2 biology Recap of the required practical activities Slides to recap the importance of data and how to ensure data is reliable, reproducible and repeatable Information slides to quickly recap areas of paper 2 Differentiated activities that ask students to apply their knowledge of the different topics. More difficult questions are there to ask students to apply their knowledge to unfamiliar situations. Stretch activities for the more able. One mark questions to quickly recap topics and establish what topics need to be revisited more thoroughly than others. The topic areas that are covered on this revision power point are : The nervous system Hormones negative feedback Menstrual cycle treating infertility contraception meiosis DNA Inheritance Genetic cross Variation The human genome project Classification selective breeding genetic modification Ecology

AQA C6 (New GCSE Spec – Unit 4.6 – The rate and extent of chemical changes) Lesson: C6.5 – Reversible reactions and energy changes in reversible reactions Specification points covered = 4.6.2.1 - Reversible reactions 4.6.2.3 - Energy changes and reversible reactions A fully resourced lesson about reversible reactions and energy changes within reversible reactions to be used when teaching the New specification of AQA C6 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides.

AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources) Lesson: C10.11 – Production and uses of NPK fertilisers (TRIPLE ONLY) Specification points covered = 4.10.4.2 - Production and uses of NPK fertiliser A fully resourced lesson about production and uses of fertilisers to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5 - The Earth's resources). Fully resourced with differentiated tasks and activities shown on power point slides.

AQA B3 (New GCSE Spec – Unit 4.3 – Infection and response) Lesson: B3.2 – Types of diseases (viral diseases; bacterial diseases; fungal diseases and protist diseases) Specification points covered = 4.3.1.2 - Viral diseases 4.3.1.3 - Bacterial diseases 4.3.1.4 - Fungal diseases 4.3.1.5 - Protist diseases A fully resourced lesson about the different diseases caused by the different pathogen groups that need to be covered in the specification to be used when teaching the new biology specification GCSE of AQA B3 (Paper 1, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA B7 (New GCSE Spec – Unit 4.7 – Ecology) Lesson: B7.9 - Waste management, global warming and deforestation Specification points covered = 4.7.3.2 - Waste management 4.7.3.3 - Land use 4.7.3.4 - Deforestation 4.7.3.5 - Global warming A fully resourced lesson about Waste management, global warming and deforestation to be used when teaching the new biology specification GCSE of AQA B7 (Paper 2, Topic 3 - Ecology). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing

Edexcel C3.6 (topic 2) - hard and soft water. Lesson that looks at types of water hardness and methods of removing water hardness. Full lesson resource with differentiated tasks.

AQA A level chemistry - Physical chemistry Topic 3 - Bonding, lesson 2 - Covalent Bonding Specification points covered = 3.1.3.2 - Nature of covalent and dative covalent bonds Fully resourced lesson covering the following with information and tasks: A single covalent bond contains a shared pair of electrons. Multiple bonds contain multiple pairs of electrons. A co-ordinate (dative covalent) bond contains a shared pair of electrons with both electrons supplied by one atom. Students should be able to represent: • a covalent bond using a line • a co-ordinate bond using an arrow. Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

This is a revision power point to be used when revising the content of AQA Chemistry paper 1 - it covers the key areas of both the trilogy and chemistry only routes - these are clearly separated out and so makes it easy to find suitable content activities for your groups. The power point includes: Specification points to discuss All required practical activities - specification points along with example methods and questions for each. Triple only content Recall questions for each topic of chemistry paper 1 (with answers) for retrieval practice. Content slides covering the key areas of each topic to discuss with your groups. Various differentiated revision activities for each topic (with answers) for students to complete as you progress through. The power point is designed to be used in revision lessons and designed in a way that key areas of weakness for individual groups can be found and addressed easily.

AQA C6 (New GCSE Spec – Unit 4.6 – The rate and extent of chemical changes) Lesson: C6.1 – Calculating rates of reaction Specification points covered = 4.6.1.1 - Calculating rates of reaction A fully resourced lesson about calculating the rates of chemical reactions to be used when teaching the New specification of AQA C6 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides.

AQA A level chemistry - Physical chemistry Topic 3 - Bonding, lesson 1 - The nature of ionic bonding Specification points covered = 3.1.3.1 - ionic bonding Fully resourced lesson covering the following with information and tasks: Ionic bonding involves electrostatic attraction between oppositely charged ions in a lattice. The formulas of compound ions eg sulfate, hydroxide, nitrate, carbonate and ammonium. Students should be able to: • predict the charge on a simple ion using the position of the element in the Periodic Table • construct formulas for ionic compounds. Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

AQA B7 (New GCSE Spec – Unit 4.7 – Ecology) Lesson: B7.11 -Food production (TRIPLE ONLY) Specification points covered = 4.7.5.1 - Factors affecting food security 4.7.5.2 - Farming techniques 4.7.5.3 - Sustainable fisheries 4.7.5.4 - Role of biotechnology A fully resourced lesson covering the food production section for the biology only route. The lesson includes information and tasks on all factors affecting food security, farming techniques, sustainable fisheries and the role of biotechnology covered in the specification. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA B7 (Paper 2, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.

A full set of power points that guides learners through every lesson in the Edexcel C1 unit. Plus, learner friendly specifications, broken down into the different topics so that learners can assess their own progress through the unit. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic. Power points are fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners. Many of the power points were used during ofsted observations which were given outstanding judgements. All passwords should have been deleted from resources to be edited, however if not, password is: science4

AQA C6 (New GCSE Spec – Unit 4.6 – The rate and extent of chemical changes) Lesson: C6.2 – Collision theory and factors affecting rate of reaction Specification points covered = 4.6.1.2 - Factors which affect the rate of chemical reactions 4.6.1.3 - Collision theory and activation energy A fully resourced lesson about collision theory and factors affecting the rate of reaction to be used when teaching the New specification of AQA C6 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides.

AQA Physics New GCSE Spec (Paper 1 Topic 4 - exams 2018) – Atomic Structure (4.4) TRILOGY ONLY LESSONS All lessons to cover the trilogy course for topic 4 (paper 1, topic 4) – Atomic Structure, from the new spec (exams 2018). Lessons to cover the whole of the trilogy course for this topic. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. Lessons also have peer and self assessment slides with answers to tasks so students can mark their own or others' work. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: 4.4.1.1 - The structure of an atom (lesson P4.1) 4.4.1.2 - Mass number, atomic number and isotopes (lesson P4.1) 4.4.1.3 - The development of the model of the atom (lesson P4.2) 4.4.2.1 - Radioactive decay and nuclear radiation (lesson P4.3) 4.4.2.2 - Nuclear Equations (lesson P4.4) 4.4.2.3 - Half-lives and random nature of radioactive decay (lesson P4.5) 4.4.2.4 - Radioactive contamination (lesson P4.6)

AQA B7 (New GCSE Spec – Unit 4.7 – Ecology) Lesson: B7.8 - Impact of environmental change (TRIPLE ONLY + HT ONLY) Specification points covered = 4.7.2.4 - Impact of environmental change (Biology only) A fully resourced lesson covering how environmental changes impact on the distribution of species for the biology only route. The lesson includes information and tasks on all aspects of the impact of change covered in the specification. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA B7 (Paper 2, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.