A bonafide Science Teacher (of 13 years), and Head of Year, from Gloucestershire offering tried and tested resources to save you the time and energy when planning. There's no point reinventing the wheel!
Watch out for new resources to help you meet the demands of teaching the Science GCSE and Chemistry A-Level.
A bonafide Science Teacher (of 13 years), and Head of Year, from Gloucestershire offering tried and tested resources to save you the time and energy when planning. There's no point reinventing the wheel!
Watch out for new resources to help you meet the demands of teaching the Science GCSE and Chemistry A-Level.
Who? For those teaching the new Chemistry/ Combined Science GCSE (2016). Also for those of you requiring a clear and simple worksheet for your students to complete on the first 20 elements of the periodic table.
What? This worksheet requires students to look up each element (from the top 20) in the periodic table to deduce how many electrons. They will then need to apply the 2, 8, 8 rule and away they go!
A couple of bonus questions at the end… (Answers are on included on the second sheet - all electronic configurations given to save you looking them up!)
For anyone trying to plan something creative to allow various science skills to be developed. This project/lesson has so much scope. At a push this could be done in a lesson and then perhaps for homework but it would work a lot better if a few of hours of time was given to make a good job of it!
The project would sit nicely anywhere within the year or would make a great end of term activity as it is a completely ‘stand alone’ topic. Perhaps you could use this in a STEM week or during Science week?
This bundle of resources contains powerpoints to guide through the project as well as teacher/technician notes, lesson plans, plus some suspect profiles to work out ‘whodunnit’. I have included a student worksheets to allow them to gather and record data and draw conclusions. Students will need to carry out practical activities as part of this project so only download if you have the capacity to set these up! Students will have to consider how to control various elements of the project/investigation and how to improve accuracy, repeatability, precision etc. They will then need to plot graphs of their results, draw observations from microscopes and carry out chemical food tests before drawing a final conclusion.
I love using this resource! It is fully editable but gives you a resource you can use straight away (you’ll just need to talk to your technicians about making some fake blood, urine and hair and fibre samples…).
How many times do we find ourselves trying to show our students how different chemistry equations link together?! Too many. Well here is an excellent, condensed summary of all the Chemistry calculations which involve moles. My students love this sheet (if that’s possible?!) as it brings it all together. This can be used with both Standard tier or Higher Tier students (it does include the Avogadro Constant, which is found in HT).
Equations included are…
Avogadro’s constant/moles/No. of particles
concentration/moles/volume
concentration/mass/volume
moles/mass/relative mass
Molar gas volume/moles/volume
I have also included conversion of dm3 into cm3 plus a couple of extra rules/definitions taken from th specification.
This worksheet has been made using the Edexcel Specification but could absolutely be used against other specifications (including A-Level).
Who? For anyone trying to plan something creative to allow various science skills to be developed. This project/lesson has so much scope. At a push this could be done in a lesson and then perhaps for homework but it would work a lot better if a couple of hours of time was given to make a good job of it!
The project would sit nicely anywhere within the year or would make a great end of term activity as it is a completely ‘stand alone’ topic. Perhaps you could use this in a STEM week or during Science week?
This bundle of resources contains a powerpoint to guide through the project as well as teacher/technician notes, a detailed lesson plan, plus some suspect profiles to work out ‘whodunnit’. I have included a student sheet to allow them to gather and record data and draw conclusions. Students will need to drop ‘blood’ onto the floor/ a surface and gather a set of control diameters of blood splats which are created upon the blood hitting the floor. Students will have to consider how to control various elements of the project/investigation and how to improve accuracy, repeatability, precision etc. They will then need to plot a graph of their results before drawing a final conclusion.
I love using this resource! It is fully editable but gives you a resource you can use straight away (you’ll just need to talk to your technicians about making some fake blood…).
Enjoy!
Who? For anyone trying to plan something creative to allow various science skills to be developed. This project/lesson has so much scope. This could be delivered as a stand alone lesson or coupled with my other forensic project lessons to create an extended investigation.
The project would sit nicely anywhere within the year or would make a great end of term activity as it is a completely ‘stand alone’ topic. Perhaps you could use this in a STEM week or during Science week?
This bundle of resources contains a powerpoint to guide through the project as well as teacher/technician notes, a detailed lesson plan, plus some suspect profiles to work out ‘whodunnit’. I have included a student sheet to allow them to gather and record observations and draw conclusions. Students will need to set up a microscope to observe some pre-prepared slides showing hair and fibre samples and draw their observations.
This resource is fully editable but can be used straight away (you’ll just need to talk to your technicians about making some hair and fibre slides using the suspect profiles for guidance…).
Enjoy!
A great knowledge organiser all boiled down to one sheet.
If students know EXACTLY WHAT they need to revise (using the specification checklist) it makes for smarter revision. If they can TEST THEMSELVES to measure their understanding - even better!
This resource is a comprehensive but concise knowledge organiser covering…
Electrolysis key definitions
Predicting the products of an electrolysis experiment (a great flow diagram to make this easier for students!)
Half equations
Purifying Copper
oxidation and reduction
This is a very simple KS3 Chemistry lesson to introduce the concept of reactivity and the reactivity series of metals.
Resource includes a very self explanatory powerpoint (including a technician list for ordering practical equipment), an introduction to the reactivity series plus a straight forward practical for students to deduce the order of reactivity of 4 metals to help fill in the gaps of the reactivity series they have been given. I have produced a practical hand out with a simple equipment list and method plus a pre-drawn table to help students get started straight away or feel free to get them designing their own if you wish. Finally students will need to write brief conclusions regarding their results and then move on to some higher order prediction making for other metals based on their results.
Download it, open it and it’s ready to go! (The only prep you’ll need to do is ordering your practical kit!)
Who? For anyone trying to plan something creative to allow various science skills to be developed. This project/lesson has so much scope. At a push this could be done in a lesson and then perhaps for homework but it would work a lot better if a couple of hours of time was given to make a good job of it! Have a look at my other forensic resources which this could be combined with!
The project would sit nicely anywhere within the year or would make a great end of term activity as it is a completely ‘stand alone’ topic. Perhaps you could use this in a STEM week or during Science week? This lesson could also be used within a Biology topic which involves ‘food tests’ (sugar and protein).
This bundle of resources contains a powerpoint to guide through the project as well as teacher/technician notes, a lesson plan, plus a student worksheet to allow them to gather and record data and draw conclusions. Students will need to test four different urine samples for the presence of sugar and protein (these will need to be prepared - see tech notes) using the benedicts and sodium hydroxide/copper sulfate solutions. Students will have to consider how to control various elements of the project/investigation and how to improve accuracy, repeatability, precision etc. They will then need to record their observations as they go along (this can be done on the student sheet).
Great resource! It is fully editable but gives you a resource you can use straight away (you’ll just need to talk to your technicians about making some fake urine…).
Enjoy!
An excellent activity to allow your A-Level Chemists to apply their knowledge of Mass Spectrometry and Infrared Spectroscopy to identify some Organic unknowns. This activity will need to be taught after students have had an introduction to the main homologous series’ in their first year of A-Level Chemistry.
The task involves students studying mass and infrared spectra to identify the unknown chemicals. Some qualitative clues have also been given to encourage students to realise that analysis often involves multiple sets of data.
All answers are included. I gave this as a paired task but would work well in groups, individually, as a homework or an assessment.
Who? For you lucky people teaching the new Chemistry/ Combined Science GCSE (2016). Also for those of you requiring a straightforward and simple lesson on atomic number, mass number plus how to use them to calculate numbers of the sub-atomic particles in an atom. This lesson has been made with reference to the new Edexcel Spec.
What? This is a whole lesson on one powerpoint. A starter/ diagnostic to see what your group know about the atom already. Learning objectives, worked examples with answers, class tasks with answers (all written in the ‘notes’ section of the powerpoint). This lesson is ready to go but still offers you flexibility to offer group work or peer teaching style tasks if you wish. Everything you need is here as powerpoint slides can be printed as ‘worksheets’ if needed.
This super resource will challenge your students plus help in preparing them for synoptic style questions. It is an activity which can be run in groups or individually depending on your group. It would make a great competition or equally as an exam style problem.
This will test students knowledge of qualitative tests as well as being able to read and interpret all spectra (HNMR, CNMR, Mass Spectrometry and Infrared Spectroscopy). Students will have to combine their skills to identify four unknowns given only qualitative test results and spectra. They will need to deduce the structure and name of the four unknowns with no help from you!
A full set of instructions plus all the answers/ solutions are included too, so you really don’t have to do ANY of the work!
This activity is tried and tested and well received! IT has been designed with the Edexcel Specification in mind but will apply to others. Enjoy! (Reviews welcome as I’d love to hear what your students thought).
Who? For people teaching the new Chemistry/ Combined Science GCSE (2016). Also for those of you requiring a straight forward and simple lesson on defining moles, calculating masses using number of moles and calculating number of moles using masses. This lesson has been made with reference to the new Edexcel Specification but could easily be applied to AQA, OCR etc.
What will you get? This is a whole lesson on one powerpoint. A starter task to get students thinking about relative mass (assuming calculation of relative mass has already been taught - if not, check out my shop and find a full lesson there!), Learning objectives, class tasks with answers (all written in the ‘notes’ section of the powerpoint) and a plenary quiz to really make sure they have met the learning objectives. This lesson is ready to go but still offers you flexibility in terms of delivery.
Everything you need is here as powerpoint slides which can be printed as ‘worksheets’ if needed. LOTS of questions included for LOTS of practice.
SPEC IT, REVISE IT, TEST IT. If students know EXACTLY WHAT they need to revise (using the specification checklist) it makes for smarter revision. If they can TEST THEMSELVES to measure their understanding - even better!
This resource is a comprehensive but concise knowledge organiser covering Chemical Cells, Fuel Cells and Hydrogen Cells. This knowledge organiser has been made against the Edexcel specification but would easily be applicable to others. The Knowledge Organiser is applicable to students sitting standard or higher tier papers (studying Separate or Combined Science routes).
Each revision point has been written as a typical ‘stock exam answer’.
A great knowledge organiser all boiled down to one sheet.
My revision methods are quite simple in my lessons - SPEC IT, REVISE IT, TEST IT. If students know EXACTLY WHAT they need to revise (using the specification checklist) it makes for smarter revision. If they can TEST THEMSELVES to measure their understanding - even better!
This resource is a comprehensive but concise knowledge organiser covering the tough put essential Chemistry Calculations plus some great examples of model calculation answers. This knowledge organiser has been made against the Edexcel specification but would easily be applicable to others. Each revision point has been written in accordance with the specification section to help students translate the specification points. The Knowledge Organiser is applicable to students sitting standard or higher tier papers.
Calculations included are…
calculating concentrations (in g/dm3 and mol/dm3)
calculating unknown concentrations using titration data
gas volume calculations starting with mass of a reactant
gas molar volume ratios
A lesson for early on in the Organic Chemistry topic of A-Level Chemistry, introducing the idea of functional groups and homologous series. Students will carry out an independent task to find out the functional groups from a given list plus the general formula and homologous series they belong to.
I have also included an exam question to assess understanding at the end of the lesson or to set as a homework for lesson follow up (answer included).
Who? For you lucky people teaching the new Chemistry/ Combined Science GCSE (2016). Also for those of you requiring a straight forward and simple lesson on Mendeleev and the development of the Periodic Table. This lesson has been made with reference to the new Edexcel Specification but could easily be applied to AQA, OCR etc.
What will you get? This is a whole lesson on one powerpoint. A starter puzzle to get students thinking about ‘sorting’, Learning objectives, worked examples with answers, class tasks with answers (all written in the ‘notes’ section of the powerpoint) and an exam style question to really make sure they have met the learning objectivve. This lesson is ready to go but still offers you flexibility to offer group work or peer teaching style tasks if you wish.
This lesson would also have room for the ‘Alkali Metals’ demonstration to be carried out but if this is not an option then I have embedded videos instead to offer a last minute alternative.
Everything you need is here as powerpoint slides and can be printed as ‘worksheets’ if needed.
This resource is a must have for Electrolysis revision, classwork or homework.
This resource is made up of two worksheets plus answers for both. Students must predict the ions which will be present during an electrolysis of various electrolytes and then decide which ions will be attracted to either electrode. It is supported by a great knowledge organiser which guides students through HOW to predict what will be formed.
Knowledge Organiser (written against the Edexcel Specification but easily applicable to others)r.
I’ve even included worked answers for the worksheets to save you the bother!
(Students may need access to a periodic table and/or a reactivity series which includes hydrogen).
A simple starter for students to sort pictures of different products and group them as acids or alkalis.
Students could then be challenged to predict the pH of the products too.
Totally editable if you’re not a fan of cut and stick, this could be done as a simple ‘circle the acids’ etc task.
Who? For people teaching the new Chemistry/ Combined Science GCSE (2016). Also for those of you requiring a straight forward and simple lesson on Electronic Configuration of atoms and how this links to the Periodic Table. This lesson has been made with reference to the new Edexcel Specification but could easily be applied to AQA, OCR etc.
What will you get? This is a whole lesson on one powerpoint. A starter task to get students thinking about what the periodic table tells us already, Learning objectives, worked examples with answers, class tasks with answers (all written in the ‘notes’ section of the powerpoint) a worksheet (attached) and an exam style question to really make sure they have met the learning objectives. This lesson is ready to go but still offers you flexibility in terms of delivery.
Everything you need is here as powerpoint slides which can be printed as ‘worksheets’ if needed.
The attached extra worksheet is already in my shop as a separate resource so in effect is a free resource to accompany the lesson.
A handful of terms relating to weathering which students can match up with their definitions. This activity is not too long and would make a good starter.